Auto-ignition propensity of ethanol-, isobutanol-, and 2-methyl-3-buten-2-ol-gasoline blends under premixed prevaporized conditions in a spark-ignition engine
Not Available
33 ADVANCED PROPULSION SYSTEMS↗
SEARCH · Engineering Papers
Results for “engineering thermodynamics”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Data reduction considerations for the burning velocity of spherical constant volume flames of R32 (CH 2 F 2 ) with air
Here, the present work explores data reduction techniques for the measurement of the laminar burning velocities of R32(CH 2 F 2 )-air mixtures using a constant volume combustion device, in which the pressure-time history is the only measured parameter. To allow clear assessment of the accuracy of the data reduction methods, the pressure-time histories used for analysis are synthetically generated via a detailed numerical simulation employing full kinetics and with and without an optically-thin radiation model. Various data reduction models are employed, including a two-zone model and two multi-zone models, and these are compared with the results from the burning velocity obtained from the output of the numerical simulation. The data reduction schemes are shown to be accurate if the same radiation model is employed in the data reduction as was used in the flame simulation to generate the pressure trace used for post-processing. If the incorrect radiation model is employed, however, the errors can be quite large. The effects of stretch, radiation, and different data post-processing methodologies are explored and the errors quantified. Stretch is shown to be important for the early stages and the selected data range that is used for extrapolation has a significant effect on the extrapolated burning velocity. However, with an appropriate choice of data considered for extrapolation, the prediction of the unstretched burning velocity can be quite accurate.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Direct numerical simulation of a turbulent methane/air flame impinged by a sub-breakdown electric field
Here, the effects of an external electric field on a turbulent methane/air diffusion flame are analyzed in this work using direct numerical simulations. The analyzed configuration consists of a temporally evolving mixing layer of air and a mixture of methane and nitrogen at 1 atm that is impinged by an electric field in the direction normal to the mean mixing plane. The combustion and chemi-ionization reactions involved in the flow are modeled using finite-rate chemistry and a reduced reaction scheme consisting of 26 species and 134 reactions. The mass diffusion and ion-wind effects are modeled using a detailed description of the diffusion coefficients and electric mobilities based on kinetic theory. The presented calculations show that the turbulence generated within the mixing layer is mostly unaffected by the applied electric field for the configuration under exam. In fact, the electric body force is developed away from the mixing region where the flow is uniform. Conversely, the turbulence is able to introduce very high intermittency in the electrically charged species concentration and, consequently, in the electric body force. Such intermittency will constitute a challenge in the future formulation of combustion models that take into account ion-wind effects.
09 BIOMASS FUELS↗
Theoretical estimates of flammability bounds for thin condensed fuel diffusion flames in microgravity using detailed models of chemistry and radiation
Recently, U-shape flammability maps have been constructed showing minimal oxygen vs. flame strain for opposed flame spread in micro-gravity by Olson and Ferkul. The U-shape defines the limiting flammability bounds from radiative extinction and flame blow-off. Here, the minimum of the U corresponds to the minimum possible oxidizer concentration where burning can occur, and is an important quantity of interest for fire safety. While high strain extinction bounds have been well analyzed, low strain radiative extinction has not. To estimate low strain extinction, in this study an analytical theory is developed based on thin flame theory coupled with a heat and mass transfer model for solid fuels. A reaction progress variable based on the Damköhler number is adapted in the theory to account for incomplete combustion at high strain rates and enable the capturing of the full flammability map. The analytical model is compared to a one dimensional numerical model w/ detailed chemical kinetics and coupled radiation heat transfer in planar and spherical geometries. The flammability maps are then qualitatively compared to experimental extinguishment data compiled by Olson and Ferkul for cylindrical rods of PMMA showing similar trends. The results show the newly developed analytics capture the radiative extinction bound compared to the numerical model and qualitatively agrees with microgravity data.
38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
Experimental measurements of fluid flow in an 84-pin hexagonal rod bundle with spacer grid for a gas-cooled fast modular reactor
A 50 MW e helium-cooled fast modular reactor (FMR) is under development, and as part of the Department of Energy Integrated Research Project (IRP), Texas A&M University is conducting the thermal-hydraulic characterization of its baseline core configuration. Here, we experimentally investigated the axial and cross flow fields characteristics in the hexagonal fuel rod bundle composed of 84 rods, a central rod, and spacer grids at a Reynolds number of 12,000. A fully transparent experimental facility resembling of one unit of the fuel assembly was constructed. Time-resolved particle image velocimetry (TR-PIV) measurements were performed to characterize hydraulic behavior downstream the spacer grid. Velocity measurements were conducted in the axial and radial direction of the rod bundle. From the PIV velocity vector fields, the full-field flow statistics were computed for the mean velocity, vorticity, and Reynolds stresses. An analysis of the energy decay downstream of the spacer grid was conducted with calculations of secondary-flow intensities, turbulent kinetic energy, power spectrum, and spatial-temporal velocity cross correlations. The vorticity field was obtained and pairs of counter-rotating vortexes were identified using a 3D reconstruction of several measurement planes. The data from this experimental campaign will be used to validate numerical models based on Computational Fluid Dynamics and other codes.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
An energy model of droplet impingement on an inclined wall under isothermal and non-isothermal environments
The observation of spray-wall interaction is of great importance to understand the dynamics that occur during fuel impingement onto the chamber wall or piston surfaces in internal combustion engines. It is found that the maximum spreading length of an impinged droplet can provide a quantitative estimation of heat transfer and energy transformation for spray-wall interaction. Furthermore, it influences the air-fuel mixing and hydrocarbon and particle emissions at combusting conditions. In this paper, an analytical model of different droplet-wall impingement conditions is developed in terms of βm (dimensionless maximum spreading length, the ratio of maximum spreading length to initial droplet diameter) to understand the detailed impinging dynamic process. These conditions are grouped as: a single diesel droplet impinging on the wall with different inclined angles (α); cold wall - heated droplet and heated wall - cold droplet impingement when inclined angle of the wall is 0°, respectively. The analytical model is built up based on the energy conservation that considers kinetic energy, gravitation energy, and surface energy before impingement, as well as viscous dissipation, gravitation energy, adhesion energy, deformation energy, and heat energy after impingement. The experimental work of diesel droplet impinging on an inclined wall is performed at a certain range of the Weber number (We of 33 to 420) with various inclined angles (α of 0° to 45°), while for inclined angle is 0°, droplet and wall temperature are varied from 25°C to 150°C to study the effects of the inclined angle and temperature on the temporal evolution of the post-impingement characteristics (i.e. droplet spreading length, dynamic contact angle). The analytical model is validated and evaluated at the aforementioned experimental operating points. The validated model can be employed to predict maximum spreading length of the droplet impinged on the wall. It is further utilized to determine the transition from capillary regime to kinetic regime, then to viscous regime at different inclined angle of the wall.
42 ENGINEERING↗
CO 2 chirped-probe-pulse femtosecond CARS thermometry
The application of CO 2 chirped-probe-pulse (CPP) fs coherent anti-Stokes Raman scattering (CARS) for flame thermometry is discussed. A phenomenological model for CO 2 /O 2 CPP fs CARS was developed, and the simulations showed the potential for CO 2 temperature measurements free of interferences from O 2 and with no contribution from the nonresonant background by using a long-time delay for the chirped probe pulse. The accuracy and precision for CO 2 CPP fs CARS thermometry is compared with N 2 CPP fs CARS thermometry for temperatures between 295 K and 1420 K. The measurement accuracy for the CO 2 measurements is comparable with that for the N 2 measurements, while the precision for the CO 2 temperature measurements is significantly better at lower temperatures. In conclusion, we also demonstrate that accurate flame thermometry using a single set of laser parameters can be achieved using the delayed CPP approach.
42 ENGINEERING↗
Plasmonics in argentene
Merging concepts from the fields of ab initio materials science and nanophotonics, there is now an opportunity to engineer new photonic materials whose optical, transport, and scattering properties are tailored to attain thermodynamic and quantum limits. Here we present first-principles calculations predicting that Argentene, a single-crystalline hexagonal close-packed monolayer of Ag, can dramatically surpass the optical properties and electrical conductivity of conventional plasmonic materials. In the low-frequency limit, we show that the scattering rate and resistivity reduce by a factor of 3 compared to the bulk three-dimensional metal. Most importantly, the low scattering rate extends to optical frequencies in sharp contrast to, e.g., graphene, whose scattering rate increase drastically in the near-infrared range due to optical-phonon scattering. Combined with an intrinsically high carrier density, this facilitates highly confined surface plasmons extending to visible frequencies. We evaluate Argentene across three distinct figures of merit, in each outperforming the state-of-the-art, making it a valuable addition to the two-dimensional heterostructure toolkit for quantum optoelectronics.
36 MATERIALS SCIENCE↗
FROMP-from-Monomer
This repository provides the 1D reaction-diffusion simulation engine for the multi-scale framework. It takes monomer-level kinetic and thermodynamic descriptors as inputs, approximated from quantum chemical calculations, to simulate and predict the macroscopic propagation behavior of Frontal Ring-Opening Metathesis Polymerization (FROMP). By solving a coupled 1D reaction-diffusion PDE system, this tool predicts front propagation speed, front temperature, and degree of conversion. The solver explicitly captures the three fundamental ROMP steps, initiator activation/inhibition, chain initiation, and propagation, while accounting for high-temperature cycloreversion as a competing pathway. The numerical implementation uses FEniCS to handle the coupled heat diffusion and reaction kinetics.
Chua, Lauren [Massachusetts Inst. of Technology (M↗
Kinetically versus thermodynamically controlled factors governing elementary pathways of GaP(111) surface oxidation
GaP and related III-V semiconductors have attracted interest as high-efficiency photoelectrochemical electrodes for solar water splitting. However, their efficacy is linked to the presence, identity, and integrity of native surface oxides, which are structurally and chemically complex and evolve during operation. Using ambient pressure X-ray photoelectron spectroscopy (APXPS) coupled with ab initio simulations, we track key chemical motifs expressed during evolution of GaP(111) surface oxides, their associated reaction kinetics, and their correlations with electronic properties. We identify two distinct thermal regimes corresponding to kinetically and thermodynamically controlled oxidation. Below 600 K, exposure to O2 generates kinetically facile Ga-O-Ga configurations, whereas higher temperatures cause activated oxygen to insert into Ga–P bonds as part of a thermodynamically driven transformation into a complex, heterogeneous 3D network of surface POx (1≤x ≤ 4) groups and Ga2O3 species, the latter of which eventually dominates upon depletion of surface phosphorus. Here our study highlights the critical competition between kinetic and thermodynamic factors during GaP oxidation, yielding insights for fabricating stable III-P-based photoelectrodes with precisely engineered surface properties.
08 HYDROGEN↗
Defect Engineering of WO 3 by Rapid Flame Reduction for Efficient Photoelectrochemical Conversion of Methane into Liquid Oxygenates
Photoelectrochemical (PEC) conversion is a promising way to use methane (CH 4 ) as a chemical building block without harsh conditions. However, the PEC conversion of CH 4 to value-added chemicals remains challenging due to the thermodynamically favorable overoxidation of CH 4 . Here, we report WO 3 nanotube (NT) photoelectrocatalysts for PEC CH 4 conversion with high liquid product selectivity through defect engineering. By tuning the flame reduction treatment, we carefully controlled the oxygen vacancies of WO 3 NTs. The optimally reduced WO 3 NTs suppressed overoxidation of CH4 showing a high total C1 liquid selectivity of 69.4% and a production rate of 0.174 μmol cm –2 h –1 . Scanning electrochemical microscopy revealed that oxygen vacancies can restrain the production of hydroxyl radicals, which, in excess, could further oxidize C1 intermediates to CO 2 . Additionally, band diagram analysis and computational studies elucidated that oxygen vacancies thermodynamically suppress overoxidation. In conclusion, this work introduces a strategy for understanding and controlling the selectivity of photoelectrocatalysts for direct conversion of CH 4 to liquids.
36 MATERIALS SCIENCE↗
Monomer-scale design of functional protein polymers using consensus repeat sequences
Protein-based polymers possess chemically defined sequences that can encode diverse properties and functions into a new class of biopolymeric materials. However, sequence variation that emerges from evolution can obscure the sequence–function relationships of naturally derived polymers. One strategy to clarify these relationships is to identify common sequences between proteins with similar functions. These conserved sequences often emerge from repeat proteins, and “consensus repeat sequences” provide a convenient platform for systematic investigations of biopolymer sequence–property relationships. In this review, we highlight recent approaches to engineer tunable polymeric materials using monomer-scale design of consensus repeat proteins. Here, we explore established and emerging protein-based materials with mechanical resilience, thermodynamic phase behavior, chemical responsiveness, biomolecular transport, and hierarchical structure. Overall, recent advances in the monomer-scale design of repetitive protein polymers present exciting fundamental and translational opportunities for polymer scientists and engineers.
36 MATERIALS SCIENCE↗
Structure and Thermodynamic Stability of Zeolitic Imidazolate Framework Surfaces
Extensive efforts over the last several decades have focused on the possibility of “crystal engineering” metal–organic framework (MOF) materials with bulk properties tailored toward specific applications. However, beyond their bulk structure, MOF interfaces and surfaces can also play an important role in governing the materials properties relevant to many applications, including both interfacial mass and/or charge transport. We presently examine the diversity of stable surface structures/terminations of zeolitic imidazolate frameworks (ZIFs), a subclass of MOFs, under a variety of conditions that are characteristic of either gas-phase, “post-synthetic” conditions (relevant to many MOF applications) or solution-phase conditions (typical of those used during MOF synthesis). We construct surface phase diagrams to predict the most stable ZIF surface terminations as a function of external parameters (including temperature, adsorbate pressures, and pH), making explicit comparison against prior experimental observations, when possible. Overall, we find that the resulting phase diagrams can be used to explain the results of prior experimental studies of ZIF terminations across a variety of conditions and provide important insights into the factors that govern the structure of ZIF interfaces.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Design screening and analysis of gas-fired ammonia-based chemisorption heat pumps for space heating in cold climate
Thermally-driven ammonia-based chemisorption heat pumps (CSHP) have the potential to provide high-efficiency space heating in cold climates. Using the reversible chemical bond between sorbent salt and ammonia, CSHP thermochemically pumps heat from the cold ambient to the end-uses of space heating at 50 °C. The heating coefficient of performance (COP) of a CSHP largely depends on the selection of the sorbent salts, cycle configuration, and the system operation. This study uses a thermodynamic model to investigate the performance of six CSHP system configurations, including four single-effect and two double-effect cycles. The feasibility and performance of 121 available NH 3 /salt reactions are studied for each configuration. The thermal COP of the cycles and the primary energy COP of the gas-fired CSHP systems are evaluated assuming 50 °C supply temperature for building space heating and the optimal system designs are identified. The highest thermal COP for single-effect and double-effect cycles under -25 °C ambient temperatures are predicted to be 1.22 and 1.57, respectively. The corresponding primary energy COPs are above 1.0 and 1.15, which are 30% higher than condensing furnaces and is sustained into the same cold temperatures.
42 ENGINEERING↗
Thermodynamic modeling of calcium carbonate scale precipitation: aqueous Na + -Ca 2+ -Cl – -HCO 3 – -CO 3 2– -CO 2 system
To allow for accurate calculations of calcium carbonate scaling in highly saline produced waters, we present a comprehensive thermodynamic model based on the electrolyte nonrandom two-liquid (eNRTL) activity coefficient equation for the aqueous Na ⁺ -Ca ²⁺ -Cl – -HCO 3 – -CO 3 ²– -CO 2 system. The eNRTL binary interaction parameters for the H 2 O:(Na ⁺ -CO 3 2– ) pair, the H 2 O:(Na ⁺ -HCO 3 – ) pair, the (Na⁺-Cl–):(Na ⁺ -CO 3 2– ) pair, and the (Na ⁺ -Cl – ):(Na ⁺ -HCO 3 – ) pair are identified in this work via the regression of thermodynamic, calorimetric, and phase equilibria experimental data. The binary interaction parameters associated with the H 2 O:(Na ⁺ -Cl – ) pair, the CO 2 :(Na ⁺ -Cl – ) pair, the H 2 O:(Ca ²⁺ -Cl – ) pair, and the (Na ⁺ -Cl – ):(Ca ²⁺ -Cl – ) pair are retrieved from the literature. The remaining binary interaction parameters are retrieved from Aspen Plus or set to zero. In addition, the solubility product constants are identified for Na 2 CO 3 ·10H 2 O (s) , Na 2 CO 3 · 7H 2 O (s) , Na 2 CO 3 ·H 2 O (s) , Na 2 CO 3 ·NaHCO 3 2H 2 O (s) , Na 2 CO 3 ·3NaHCO 3 (s) , and CaCO 3(s) via regression of solubility data. Here, the model is capable of accurately calculating all phase equilibria and calorimetric properties at temperatures up to 473.15 K and salt concentrations up to saturation.
42 ENGINEERING↗
From breaking rules to making rules in materials science
This editorial is a perspective article discussing the broader philosophy of synthesis science, emphasizing how techniques such as MBE allow researchers to manipulate bonding, structure, and defects beyond equilibrium thermodynamics, enabling the design of new materials and emergent properties through controlled growth and epitaxial engineering.
Jalan, Bharat [Univ. of Minnesota, Minneapolis, MN↗
TRACER SPARC AERI Data
These files contain 24 hour periods of retrieved thermodynamic profiles derived from observations collected by the University of Wisconsin–Madison Space Science and Engineering Center Portable Atmospheric Research Center (SPARC) Atmospheric Emitted Radiance Interferometer (AERI). The TROPoe algorithm is a python equivalent to the AERIoe algorithm (see Turner and Loehnert, 2014; Turner and Blumberg 2019). These data were collected during the TRACER project.
54 ENVIRONMENTAL SCIENCES↗
Materials Design Directions for Solar Thermochemical Water Splitting
The sustainable, economical production of molecular hydrogen is a crucial component of a net zero-greenhouse-gas-emissions future. Solar thermochemical water splitting (STWS) offers a renewable route to hydrogen with the potential to help decarbonize several industries, including transportation, manufacturing, mining, metals processing, and electricity generation, as well as provide sustainable hydrogen as a chemical feedstock. STWS uses high temperatures generated from concentrated sunlight or other sustainable means for high-temperature heat to produce hydrogen and oxygen from steam. For example, in its simplest form of a two-step thermochemical cycle, a redox-active metal oxide is heated to ≈1700-2000 K, driving off molecular oxygen while producing oxygen vacancies in the material. The reduced metal oxide then cools (ideally with the extracted heat recuperated for re-use) and, in a separate step, comes into contact with steam, which reacts with oxygen vacancies to produce molecular hydrogen while recovering the original state of the metal oxide. Despite its promising use of the entire solar spectrum to split water thermochemically, the current estimated cost of hydrogen produced via STWS is ≈4-6× the U.S. Department of Energy (DOE) Hydrogen Shot target value of $1/kg. One contributing approach to bridging this cost gap is the design of new materials with improved thermodynamic properties to enable higher efficiencies. The state-of-the-art (SOA) redox-active metal oxide for STWS is ceria (CeO 2 ), due to its close to optimal, although too high, oxygen vacancy formation enthalpy and large configurational and electronic entropy of reduction. However, ceria requires high operating temperatures and its efficiency is insufficient. Therefore, efforts to increase the efficiency of STWS cycles have focused on further optimizing oxygen vacancy formation enthalpies and augmenting the reduction entropy via substitution or doping and materials discovery schemes. Examples of the latter include the perovskites BaCe 0.25 Mn 0.75 O 3 and (Ca,Ce)(Ti,Mn)O 3 . These efforts and others have revealed intuitive chemical principles for the efficient and systematic design of more effective materials, such as the strong correlation between the enthalpies of crystal bond dissociation and solid-state cation reduction with the enthalpy of oxygen vacancy formation, as well as configurational entropy augmentation via the coexistence of two or more redox-active cation sublattices. The purpose of this chapter is to prepare the reader with an up-to-date account of STWS redox-active materials, both the SOA and promising newcomers, as well as to provide chemically intuitive strategies for improving their cycle efficiencies through materials design – in conjunction with ongoing efforts in reactor engineering and gas separations – to reach the cost points for commercial viability. First, we will introduce the thermodynamics of STWS using a two-step, metal-oxide, thermochemical cycle with economics in mind. We also will compare the pros and cons of processes that do or do not involve phase changes. Second, we will describe the qualities that make ceria the SOA STWS redox-active material, as well as its limitations. Third, we will survey some of the most promising candidates to date in the search for materials to supplant ceria, emphasizing the post-ternary, metal-oxide-perovskite alloys. Lastly, we will enumerate and discuss the following materials design directions for STWS redox-active materials: crystal reduction potentials as a proxy for oxygen vacancy formation enthalpies, engineering the electronic and configurational entropy of reduction via f-shells and simultaneous redox, and vetting materials stability via temperature-dependent phase diagrams and melting-point prediction.
08 HYDROGEN↗