Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronics cooling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Feasibility study of quantum computing using trapped electrons

In this study, we investigate the feasibility of using electrons in a linear Paul trap as qubits in a future quantum computer. We discuss the necessary experimental steps to realize such a device through a concrete design proposal, including trapping, cooling, electronic detection, spin readout, and single- and multiqubit gate operations. Numeric simulations indicate that two-qubit Bell-state fidelities of order 99.99% can be achieved assuming reasonable experimental parameters.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS1985

Heat balance of the ionosphere - Implications for the International Reference Ionosphere

Theoretical considerations can be helpful tools in modeling ionospheric parameters in regions and for times where not enough experimental data are available. This study asks whether results of heat balance calculations should be introduced to supplement the data base for the International Reference Ionosphere. The present status of the theoretical understanding is discussed and the influence of the following unresolved or neglected times are examined: (1) electron heating rate, (2) electron cooling by fine structure excitation of atomic oxygen, and (3) height-dependent Coulomb Logarithm. The ambiguity introduced by these terms leads to up to 30 percent uncertainty in the electron temperature of the lower ionosphere. The electron temperature in the upper ionosphere is largely determined by heat conduction from above and depends critically on the conditions assumed at the boundary between ionosphere and plasmasphere.

Bilitza, D.↗
NASA NTRS1991

Development of a hybrid chemical/mechanical heat pump

The authors present the current development status of a hybrid chemical/mechanical heat pump for low-lift applications. The heat pump provides electronics cooling by evaporating a pure refrigerant from an absorbent/refrigerant mixture in a generator/cold plate. The current development focused on evaluation of absorbent/refrigerant pairs, corrosion testing, pump and compressor design, and electronic cold plate design. Two cycle configurations were considered. The first configuration utilized a standard mechanical compressor and pump. The second cycle configuration investigated pumps and compressors with non-moving parts. An innovative generator/cold plate design is also presented. The development to date shows that this cycle has about the same performance as standard vapor compression heat pumps with standard refrigerants but may have some performance and reliability advantages over vapor compression heat pumps.

Grzyll, Lawrence R.↗
DOE OSTI2021

Electron thermalization and relaxation in laser-heated nickel by few-femtosecond core-level transient absorption spectroscopy

Direct measurements of photoexcited carrier dynamics in nickel are made using few-femtosecond extreme ultraviolet (XUV) transient absorption spectroscopy at the nickel M 2,3 edge. It is observed that the core-level absorption line shape of photoexcited nickel can be described by a Gaussian broadening (σ) and a red shift (ω s ) of the ground-state absorption spectrum. Theory predicts and the experimental results verify that after initial rapid carrier thermalization, the electron temperature increase (ΔT ) is linearly proportional to the Gaussian broadening factor σ, providing quantitative real-time tracking of the relaxation of the electron temperature. Measurements reveal an electron cooling time for 50 nm thick polycrystalline nickel films of 640 ± 80 fs. With hot thermalized carriers, the spectral red shift exhibits a power-law relationship with the change in electron temperature of ω s ∝ ΔT 1.5 . Rapid electron thermalization via carrier-carrier scattering accompanies and follows the nominal 4-fs photoexcitation pulse until the carriers reach a quasithermal equilibrium. Entwined with a <6 fs instrument response function, carrier thermalization times ranging from 34 fs to 13 fs are estimated from experimental data acquired at different pump fluences and it is observed that the electron thermalization time decreases with increasing pump fluence. Here, the study provides an initial example of measuring electron temperature and thermalization in metals in real time with XUV light, and it lays a foundation for further investigation of photoinduced phase transitions and carrier transport in metals with core-level absorption spectroscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Generalized wakefield of a microbunched electron cooler

In a previous note [1] we developed theoretical and computational tools for the study of microbunched electron cooling (MBEC [2]) in the three-dimensional regime. In this context, we were able to treat the key space charge effect in a rigorous fashion by taking explicitly into account the point-charge nature of the particles involved (electrons and hadrons). In this report, we build upon our earlier analysis by taking into consideration previously neglected effects that can cause Landau damping in the amplifier section (such as focusing, betatron oscillations and the angular spread of the electron beam). Beginning with the theoretical aspect of this work, we use our modified and expanded tools in order to calculate and study the generalized, point-hadron wakefield of the system, an important quantity that affects the cooling performance.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Comptonization by reconnection plasmoids in black hole coronae – III. Dependence on the guide field in pair plasma

ABSTRACT We perform non-radiative two-dimensional particle-in-cell simulations of magnetic reconnection for various strengths of the guide field (perpendicular to the reversing field), in magnetically dominated electron–positron plasmas. Magnetic reconnection under such conditions could operate in accretion disc coronae around black holes. There, it has been suggested that the transrelativistic bulk motions of reconnection plasmoids containing inverse-Compton-cooled electrons could Compton-upscatter soft photons to produce the observed non-thermal hard X-rays. Our simulations are performed for magnetizations 3 ≤ σ ≤ 40 (defined as the ratio of enthalpy density of the reversing field to plasma enthalpy density) and guide field strengths 0 ≤ Bg/B0 ≤ 1 (normalized to the reversing field strength B0). We find that the mean bulk energy of the reconnected plasma depends only weakly on the flow magnetization but strongly on the guide field strength – with Bg/B0 = 1 yielding a mean bulk energy twice smaller than Bg/B0 = 0. Similarly, the dispersion of bulk motions around the mean – a signature of stochasticity in the plasmoid chain’s motions – is weakly dependent on magnetization (for σ ≳ 10) but strongly dependent on the guide field strength – dropping by more than a factor of two from Bg/B0 = 0 to Bg/B0 = 1. In short, reconnection in strong guide fields (Bg/B0 ∼ 1) leads to slower and more ordered plasmoid bulk motions than its weak guide field (Bg/B0 ∼ 0) counterpart.

Astronomy & Astrophysics↗
DOE OSTI2021

Beam physics research with the IOTA electron lens

The electron lens in the Fermilab Integrable Optics Test Accelerator (IOTA) will enable new research in nonlinear integrable optics, space-charge compensation, electron cooling, and the stability of intense beams. This research addresses scientific questions on high-brightness beams and operational challenges of high-power accelerators for nuclear and particle physics. We review the roles that electron lenses play in this field and the physical principles behind their applications. The design criteria and specifications for the IOTA storage ring and electron lens are then discussed. We conclude with a description of the components of the apparatus.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Hot electrons between cold walls

We consider electron cooling in a collisionless plasma slab between two cold and freely emitting walls. Numerical calculations suggest a counterintuitive behavior of this system: the cooling rate slows down and eventually stops, leaving the system with a significant fraction of its initial thermal energy. Analytical treatment within the Vlasov–Poisson model reveals a set of steady-states with a two-component distribution of electrons: the primary electrons trapped within the potential wells and the secondary electrons forming the counterstreaming beams. We show that such steady-states are linearly stable with respect to one-dimensional perturbations. Establishment of a particular steady-state depends on initial conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1991

Long life electrodes for large-area x-ray generators

This invention is directed to rugged, reliable, and long-life electrodes for use in large-area, high-current-density electron gun and x-ray generators which are employed as contamination-free preionizers for high-energy pulsed gas lasers. The electron source at the cathode is a corona plasma formed at the interface between a conductor, or semiconductor, and a high-permittivity dielectric. Detailed descriptions are provided of a reliable cold plasma cathode, as well as an efficient liquid-cooled electron beam target (anode) and x-ray generator which concentrates the x-ray flux in the direction of an x-ray window.

Rothe, Dietmar E.↗
DOE OSTI2023

A reduced-model (nSOLT) simulation of neutral recycling effects on plasma turbulence in the divertor region of MAST-U

The 2D scrape-off-layer turbulence code (nSOLT), which includes 1D kinetic neutral–plasma interactions, is applied to study effects of neutral recycling on plasma turbulence for parameters illustrative of the MAST-U divertor region. Neutral recycling is modeled by injecting a fraction of the parallel plasma flux to the divertor back into the simulation domain as a source of Franck–Condon-distributed neutrals. Stationary sources, concentrated at the magnetic separatrix, model plasma streaming into the divertor region from the upstream scrape-off-layer and sustain plasma turbulence absent neutral recycling. Starting from one such no-neutrals equilibrium, we initiate recycling in a numerical experiment designed to diagnose and identify the effects of various neutral–plasma interactions on the divertor plasma, divertor turbulence, and plasma exhaust. The onset of recycling triggers an initial burst of enhanced cross field plasma transport that is quelled by ionization cooling and charge–exchange (CX) friction, with growing neutral pressure, leading to a quiescent, turbulence-free state. Diagnosis of this transient burst reveals that (1) the sudden increase in plasma density due to ionization dominates the onset of the burst, (2) electron cooling due to ionization increases collisionality and disconnects blob filaments from the sheath, and (3) CX friction drives tripole polarization of a blob that can dominate the curvature-driven dipole polarization, leading to the stagnation of blob propagation and reduced radial turbulent transport. It is shown that CX friction is negligible compared to sheath physics in determining equilibrium mean flow shearing rates, for parameters considered herein (specifically a short connection length to the divertor target), while it can significantly reduce interchange-instability growth rates.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2019

Closure Relations of Gamma-Ray Bursts in High Energy Emission

The synchrotron external shock model predicts the evolution of the spectral (β) and temporal (α) indices during the gamma-ray burst (GRB) afterglow for different environmental density profiles, electron spectral indices, electron cooling regimes, and regions of the spectrum. We study the relationship between α and β, the so-called “closure relations” with GRBs detected by Fermi Large Area Telescope (Fermi-LAT) from 2008 August to 2018 August. The spectral and temporal indices for the >100 MeV emission from the Fermi-LAT as determined in the Second Fermi-LAT Gamma-Ray Burst Catalog (2FLGC) are used in this work. We select GRBs whose spectral and temporal indices are well constrained (58 long-duration GRBs and 1 short-duration GRBs) and classify each GRB into the best-matched relation. As a result, we found that a number of GRBs require a very small fraction of the total energy density contained in the magnetic field (òB <~10−7). The estimated mean and standard deviation of electron spectral index p are 2.40 and 0.44, respectively. The GRBs satisfying a closure relation of the slow cooling tend to have a softer p value compared to those of the fast cooling. Moreover, the Kolmogorov–Smirnov test of the two p distributions from the fast and slow coolings rejects a hypothesis that the two distributions are drawn from the single reference distribution with a significance of 3.2σ. Lastly, the uniform density medium is preferred over the medium that decreases like the inverse of distance squared for long-duration GRBs.

Gamma-ray bursts↗
DOE OSTI2019

Closure Relations of Gamma-Ray Bursts in High Energy Emission

The synchrotron external shock model predicts the evolution of the spectral (β) and temporal (α) indices during the gamma-ray burst (GRB) afterglow for different environmental density profiles, electron spectral indices, electron cooling regimes, and regions of the spectrum. We review the relationship between α and β, the so-called "closure relations" with GRBs detected by Fermi Large Area Telescope (Fermi-LAT) from 2008 August to 2018 August. The spectral and temporal indices for the >100 MeV emission from the Fermi-LAT as determined in the Second Fermi-LAT Gamma-Ray Burst Catalog (2FLGC) are used in this work. We select GRBs whose spectral and temporal indices are well constrained (58 long-duration GRBs and 1 short-duration GRBs) and classify each GRB into the best-matched relation. As a result, we found that a number of GRBs require a very small fraction of the total energy density contained in the magnetic field (ϵ B ≲ 10 –7 ). The estimated mean and standard deviation of electron spectral index p are 2.40 and 0.44, respectively. The GRBs satisfying a closure relation of the slow cooling tend to have a softer p value compared to those of the fast cooling. Furthermore, the Kolmogorov–Smirnov test of the two p distributions from the fast and slow coolings rejects a hypothesis that the two distributions are drawn from the single reference distribution with a significance of 3.2σ. Lastly, the uniform density medium is preferred over the medium that decreases like the inverse of distance squared for long-duration GRBs.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Four-dimensional phase-space reconstruction of flat and magnetized beams using neural networks and differentiable simulations

Beams with cross-plane coupling or extreme asymmetries between the two transverse phase spaces are often encountered in particle accelerators. Flat beams with large transverse-emittance ratios are critical for future linear colliders. Similarly, magnetized beams with significant cross-plane coupling are expected to enhance the performance of electron cooling in hadron beams. Preparing these beams requires precise control and characterization of the four-dimensional transverse phase space. In this study, we employ generative phase-space reconstruction techniques to rapidly characterize magnetized and flat-beam phase-space distributions using a conventional quadrupole-scan method. The reconstruction technique is experimentally demonstrated on an electron beam produced at the Argonne Wakefield Accelerator and successfully benchmarked against conventional diagnostics techniques. Specifically, we show that predicted beam parameters from the reconstructed phase-space distributions (e.g., as magnetization and flat-beam emittances) are in excellent agreement with those measured from the conventional diagnostic methods. Published by the American Physical Society 2024

43 PARTICLE ACCELERATORS↗
NASA NTRS1972

The electron heating rate and ion chemistry in the thermosphere above Wallops Island during the solar eclipse of 7 March 1970.

Measurement of the N2 concentration and temperature, the ion composition and concentrations, and the electron temperature up to 290 km about 30 and 5 min before totality during the Mar. 7, 1970, eclipse. The rockets traveled similar trajectories, thus permitting the purely temporal changes between flights to be resolved. The neutral temperature and N2 concentration changed little, but the electron temperature decreased by as much as 20% in the lower F region. The ion concentration decreased by about 30% in the F region and about 50% in the E region, with little change in relative ion composition. The electron cooling rates decreased by a factor of 6 in the lower F region, approximately in proportion to the change in the visible solar disk. A smaller than expected decrease in the cooling rate below 150 km between the two flights indicates a hardening of the solar spectrum and suggests a significant heat contribution from the solar corona near totality. The ion composition measurements were consistent with solutions of the ion continuity equations. A proper fit required a factor-of-three enhancement of the flux below 200 A, an amount also consistent with the electron heat balance analysis. Reactions involving the minor ions N(+) and N2(+) were found to be important for the ion chemistry of the major ions O2(+) and NO(+), especially at the time of eclipse.-

Brace, L. H.↗
DOE OSTI2014

Synthesis of Bi{sub 2}S{sub 3} with different sulfur content by conventional high temperature solid state solvothermal route

Bismuth sulfide (Bi{sub 2}S{sub 3}) is a binary chalcogenide compound material belonging to V-VI group of semiconductors. Because of its direct band gap of 1.3 eV and high figure of merit (ZT) value, it is widely used as a thermo electronic-cooling material based on the Peltier effect. The electrical and optical property of Bi{sub 2}S{sub 3} material is strongly dependent on stoichiometric composition, defect chemistry and structure. In this study, we have synthesized Bi{sub 2}S{sub x} (x = 3.15, 3.30, 3.45) compound material with different sulfur content by conventional high temperature solid state solvothermal reaction of bismuth and sulfur. X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive x-ray spectroscopy (EDXS) analysis of synthesized compound materials were carried out to observe crystallinity, surface morphology and composition of elements in the compound. The optical analysis revealed that energy band gap decreases with increase of sulfur content.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Mixed convection flow of nanofluid in a square enclosure with an intruded rectangular fin

Mixed convection flow in enclosures has been a subject of interest for many years due to their ever increasing applications in solar collectors, electronic cooling, lubrication technologies, food processing, and nuclear reactors. In comparison, little effort has been given to the problem of mixed convection in enclosures filled with nanofluids, while the addition of nanoparticles in a fluid base to alter specific material properties is considered a feasible solution for many heat transfer problems. Mixed convection of nanofluids is a challenging problem as the addition of nanoparticles changes the fluid’s thermo-physical properties as well as due to the complex interactions among inertia, viscous, and buoyancy forces. In this study, a two-dimensional steady-state numerical model has been developed to investigate mixed convection flow of nanofluids in a square enclosure with an intruded rectangular fin and to optimize the fin geometry for maximizing the heat transfer using the Constructal design. The model has been developed using ANSYS-FLUENT for various fin geometries. Flow fields, temperature fields, and heat transfer rates are examined for different values of Rayleigh and Reynolds numbers for several geometries of the fin with the aim of maximizing the heat transfer from the fin to the surrounding flow. Outcome of this study provides important insight into the heat transfer behavior of nanofluids, which will help in developing novel geometries with enhanced and controlled heat transfer for solar collectors and electronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗