Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “elastic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Temperature-dependent elastic constants of thorium dioxide probed using time-domain Brillouin scattering

Herein we report the adiabatic elastic constants of single-crystal thorium dioxide over a temperature range of 77–350 K. Time-domain Brillouin scattering, an all-optical, non-contact picosecond ultrasonic technique, is used to generate and detect coherent acoustic phonons that propagate in the bulk perpendicular to the surface of the crystal. These coherent acoustic lattice vibrations have been monitored in two hydrothermally grown single-crystal thorium dioxide samples along the (100) and (311) crystallographic directions. The three independent elastic constants of the cubic crystal (C 11 , C 12 , and C 44 ) are determined from the measured bulk acoustic velocities. The longitudinal wave along the (100) orientation provided a direct measurement of C 11 . Measurement of C 44 and C 12 was achieved by enhancing the intensity of quasi-shear mode in a (311) oriented crystal by adjusting the polarization angle relative to the crystal axes. We find the magnitude of softening of the three elastic constants to be ~2.5% over the measured temperature range. Good agreement is found between the measured elastic constants with previously reported values at room temperature, and between the measured temperature-dependent bulk modulus with calculated values. We find that semi-empirical models capturing lattice anharmonicity adequately reproduce the observed trend. We also determine the acoustic Grüneisen anharmonicity parameter from the experimentally derived temperature-dependent bulk modulus and previously reported temperature-dependent values of volumetric thermal expansion coefficient and heat capacity. This work presents measurements of the temperature-dependent elasticity in single-crystal thorium dioxide at cryogenic temperature and provides a basis for testing ab initio theoretical models and evaluating the impact of anharmonicity on thermophysical properties.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Hydrogen and self-interstitial interactions with edge dislocations in Ni: atomistic and elasticity comparisons

The interactions of hydrogen interstitial and self-interstitial with dissociated Shockley partial dislocations in fcc Ni were studied with embedded atom method calculations and the results were compared with those obtained from elasticity solutions. Such cross-correlations are important for efficient and accurate inclusion of the point defects into the dislocation dynamics simulations that are usually based on elasticity theories. The simulations were carried out using a dipole dislocation cell having periodic boundaries. The size effect, tetragonal distortions and the modulus effect were considered in the elasticity analysis. The results indicate that the elasticity solutions compare well with the atomistic results for the regions outside the Shockley partial cores, even though the interaction energies differed by approximately one order of magnitude for these two types of point defects. The range where the elasticity description of the interstitial-dislocation interaction breaks down was identified. In the self-interstitial case, the core reaction with the interstitial was observed, resulting in a larger core interaction range.

97 MATHEMATICS AND COMPUTING↗

Elastically mediated interactions between grain boundaries and precipitates in two-phase coherent solids

In this work, we investigate analytically and numerically the interaction between grain boundaries and second phase precipitates in two-phase coherent solids in the presence of misfit strain. Our numerical study uses amplitude equations that describe the interaction of composition and stress [R. Spatschek and A. Karma, Phys. Rev. B 81, 214201 (2010)] and free-energies corresponding to two-dimensional hexagonal and three-dimensional BCC crystal structures that exhibit isotropic and anisotropic elastic properties, respectively. We consider two experimentally motivated geometries where (i) a lamellar precipitate nucleates along a planar grain boundary that is centered inside the precipitate, and (ii) a circular precipitate nucleates inside a grain at a finite distance to an initially planar grain boundary. For the first geometry, we find that the grain boundary becomes morphologically unstable due to the combination of long-range elastic interaction between the grain boundary and compositional domain boundaries, and shear-coupled grain boundary motion. We characterize this instability analytically by extending the linear stability analysis carried out recently [P.-A. Geslin, Y.-C. Xu, and A. Karma, Phys. Rev. Lett. 114, 105501 (2015)] to the more general case of elastic anisotropy. The analysis predicts that elastic anisotropy hinders but does not suppress the instability. Simulations also reveal that, in a well-developed nonlinear regime, this instability can lead to the break-up of low-angle grain boundaries when the misfit strain exceeds a threshold that depends on the grain boundary misorientation. For the second geometry, simulations show that the elastic interaction between an initially planar grain boundary and an adjacent circular precipitate causes the precipitate to migrate to and anchor at the grain boundary.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Elastic, mechanical, and thermodynamic properties of Bi-Sb binaries: Effect of spin-orbit coupling

Using first-principles calculations, we systematically study the elastic stiffness constants, mechanical properties, elastic wave velocities, Debye temperature, melting temperature, and specific heat of several thermodynamically stable crystal structures of BixSb 1-x (0 < x < 1) binaries, which are of great interest due to their numerous inherent rich properties, such as thermoelectricity, thermomagnetic cooling, strong spin-orbit coupling (SOC) effects, and topological features in the electronic band structure. We analyze the bulk modulus (B), Young's modulus (E), shear modulus (G), B/G ratio, and Poisson's ratio ($\nu$) as a function of the Bi concentration in BixSb 1-x . The effect of SOC on the above-mentioned properties is further investigated. In general, we observe that the SOC effects cause elastic softening in most of the studied structures. Three monoclinic structures of Bi-Sb binaries are found to exhibit significantly large auxetic behavior due to the hingelike geometric structure of bonds. The Debye temperature and the magnitude of the elastic wave velocities monotonically increase with increasing Sb concentration. However, anomalies were observed at very low Sb concentration. We also discuss the specific-heat capacity versus temperature data for all studied binaries. Our theoretical results are in excellent agreement with the existing experimental and theoretical data. The comprehensive understanding of the material properties such as hardness, mechanical strength, melting temperature, propagation of the elastic waves, auxeticity, and heat capacity is vital for practical applications of the studied binaries.

36 MATERIALS SCIENCE↗

Elastic scattering in the 12 N + 197 Au system at 𝐸 lab = 70 MeV

Halo structure is an interesting exotic configuration developed in some light weakly bound nuclei, where a valence particle orbits a nuclear core. Signatures of halo structure can be observed in the angular distributions of the elastic scattering induced by these nuclei at energies around the Coulomb barrier. There are some well-studied reactions with neutron-rich halo nuclei, such as 6 He and 11 Li . However, the information is scarce on the proton-rich side. Recent works confirm the halo structure in the 8B nuclei but still lack more experimental studies for other proton-halo candidates, such as 12 N and 17 F. In this work, we report experimental data for the elastic scattering of 12 N on 197 Au target at 𝐸 lab = 70 MeV. The 12 N is a proton-rich nucleus with proton separation energy 𝑆 𝑝 = 600 keV, which is higher than the 8 B (𝑆 𝑝 = 137 keV) and almost the same as the 17 F (𝑆 𝑝 = 601 keV). Data were obtained at the Cyclotron Institute of Texas A&M University where the 12 N radioactive beam was produced by the momentum achromatic recoil spectrometer. The calculation of the optical model was used to fit the measured angular distribution for the elastic scattering and to obtain the reaction cross section 𝜎 𝑅 . We also performed continuum discretized coupled-channel calculations to compare with the experimental data. The angular distribution of the elastic cross sections exhibits a suppression of the Fresnel peak. From the fitting of the optical model, we obtain the total reaction cross section, 𝜎 𝑅 = 1269 ± 41 mb. The agreement between the CDCC calculation and the experimental elastic scattering data is limited and the breakdown does not exhaust the measured 𝜎 𝑅 . The resulting reduced reaction cross section 𝜎 Red for 12 N + 197 Au is large and comparable to the one obtained for the 8 B + 208 Pb system. This suggests a strong decoupling of the valence proton from the core because of the low binding energy and a dynamic polarization effect. Here, more research is required to estimate the contribution of core excitation.

Elastic scattering reactions↗

Phenomenology of elastic energy loss

The unexpectedly strong suppression of high p{sub T} heavy quarks in heavy-ion collisions has given rise to the idea that partons propagating through a medium in addition to energy loss by induced radiation also undergo substantial energy loss due to elastic collisions. However, the precise magnitude of this elastic energy-loss component is highly controversial. Although for a parton inside a medium it is surprisingly difficult to define the difference between elastic and radiative processes rigorously, the main phenomenological difference is in the dependence of energy loss on in-medium path length: in a constant medium radiative energy loss is expected to grow quadratically with path length, elastic energy loss linearly. In this article, we investigate a class of energy-loss models with such a linear path-length dependence and demonstrate that they are incompatible with measured data on hard hadronic back-to-back correlations where a substantial variation of path length is probed. This indicates that any elastic energy-loss component has to be small.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Effects of anharmonic vibration on large-angle quasi-elastic scattering of {sup 16}O+{sup 144}Sm

We study the effects of double octupole and quadrupole phonon excitations in the {sup 144}Sm nucleus on quasi-elastic {sup 16}O+{sup 144}Sm scattering at backward angles. To this end, we use the coupled-channels framework, taking into account explicitly the anharmonicities of the vibrations. We use the same coupling scheme as that previously employed to explain the experimental data of sub-barrier fusion cross sections for the same system. We show that the experimental data for the quasi-elastic cross sections are well reproduced in this way, although the quasi-elastic barrier distribution has a distinct high energy peak which is somewhat smeared in the experimental barrier distribution. We also discuss the effects of proton transfer on the quasi-elastic barrier distribution. Our study indicates that the fusion and quasi-elastic barrier distributions for this system cannot be accounted for simultaneously with the standard coupled-channels approach.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Effect of repulsive and attractive three-body forces on nucleus-nucleus elastic scattering

The effect of the three-body force (TBF) is studied in nucleus-nucleus elastic scattering on the basis of Brueckner theory for nucleon-nucleon (NN) effective interaction (complex G matrix) in the nuclear matter. A new G matrix called CEG07 proposed recently by the present authors includes the TBF effect and reproduces a realistic saturation curve in the nuclear matter, and it is shown to well reproduce proton-nucleus elastic scattering. The microscopic optical potential for the nucleus-nucleus system is obtained by folding the G matrix with nucleon density distributions in colliding nuclei. We first analyze in detail the {sup 16}O+{sup 16}O elastic scattering at E/A=70 MeV. The observed cross sections are nicely reproduced up to the most backward scattering angles only when the TBF effect is included. The use of the frozen-density approximation (FDA) is essentially important to properly estimate the effect of the TBF in nucleus-nucleus scattering. Other prescriptions for defining the local density have also been tested, but only the FDA prescription gives a proper description of the experimental cross sections as well as the effect of the TBF. The effects of the three-body attraction and the {omega}-rearrangement term are also analyzed. The CEG07 interaction is compared with CDM3Y6, which is a reliable and successful effective density-dependent NN interaction used in the double-folding model. The CEG07 G matrix is also tested in the elastic scattering of {sup 16}O by the {sup 12}C, {sup 28}Si, and {sup 40}Ca targets at E/A=93.9 MeV, and in the elastic scattering of {sup 12}C by the {sup 12}C target at E/A=135 MeV with great success. The decisive effect of the TBF is clearly seen also in those systems. Finally, we have tested CEG07a, CEG07b, and CEG07c for the {sup 16}O+{sup 16}O system at various energies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurement of the n-p elastic scattering angular distribution at E{sub n}=14.9 MeV

The relative differential cross section for the elastic scattering of neutrons by protons was measured at an incident neutron energy E{sub n}=14.9 MeV and for center-of-mass scattering angles ranging from about 60 deg. to 180 deg. Angular distribution values were obtained from the normalization of the integrated data to the n-p total elastic scattering cross section. Comparisons of the normalized data to the predictions of the Arndt et al. phase-shift analysis, those of the Nijmegen group, and with the ENDF/B-VII.0 evaluation are sensitive to the value of the total elastic scattering cross section used to normalize the data. The results of a fit to a first-order Legendre polynomial expansion are in good agreement in the backward scattering hemisphere with the predictions of the Arndt et al. phase-shift analysis, those of the Nijmegen group, and to a lesser extent, with the ENDF/B-VII.0 evaluation. A fit to a second-order expansion is in better agreement with the ENDF/B-VII.0 evaluation than with the other predictions, in particular when the total elastic scattering cross section given by Arndt et al. and the Nijmegen group is used to normalize the data. A Legendre polynomial fit to the existing n-p scattering data in the 14 MeV energy region, excluding the present measurement, showed that a best fit is obtained for a second-order expansion. Furthermore, the Kolmogorov-Smirnov test confirms the general agreement in the backward scattering hemisphere and shows that significant differences between the database and the predictions occur in the angular range between 60 deg. and 120 deg. and below 20 deg. Although there is good overall agreement in the backward scattering hemisphere, more precision small-angle scattering data and a better definition of the total elastic cross section are needed for an accurate determination of the shape and magnitude of the angular distribution.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Effect of directed aging on nonlinear elasticity and memory formation in a material

Disordered solids often change their elastic response as they slowly age. Using experiments and simulations, we study how aging disordered planar networks under an applied stress affects their nonlinear elastic response. We are able to modify dramatically the elastic properties of our systems in the nonlinear regime. Using simulations, we study two models for the microscopic evolution of properties of such a material; the first considers changes in the material strength, while the second considers distortions in the microscopic geometry. Both models capture different aspects of the experiments including the encoding of memories of the aging history of the system and the dramatic effects on the material’s nonlinear elastic properties. Our results demonstrate how aging can be used to create complex elastic behavior in the nonlinear regime.

36 MATERIALS SCIENCE↗

TU-F-BRF-02: MR-US Prostate Registration Using Patient-Specific Tissue Elasticity Property Prior for MR-Targeted, TRUS-Guided HDR Brachytherapy

Purpose: High-dose-rate (HDR) brachytherapy has become a popular treatment modality for prostate cancer. Conventional transrectal ultrasound (TRUS)-guided prostate HDR brachytherapy could benefit significantly from MR-targeted, TRUS-guided procedure where the tumor locations, acquired from the multiparametric MRI, are incorporated into the treatment planning. In order to enable this integration, we have developed a MR-TRUS registration with a patient-specific biomechanical elasticity prior. Methods: The proposed method used a biomechanical elasticity prior to guide the prostate volumetric B-spline deformation in the MRI and TRUS registration. The patient-specific biomechanical elasticity prior was generated using ultrasound elastography, where two 3D TRUS prostate images were acquired under different probe-induced pressures during the HDR procedure, which takes 2-4 minutes. These two 3D TRUS images were used to calculate the local displacement (elasticity map) of two prostate volumes. The B-spline transformation was calculated by minimizing the Euclidean distance between the normalized attribute vectors of the prostate surface landmarks on the MR and TRUS. This technique was evaluated through two studies: a prostate-phantom study and a pilot study with 5 patients undergoing prostate HDR treatment. The accuracy of our approach was assessed through the locations of several landmarks in the post-registration and TRUS images; our registration results were compared with the surface-based method. Results: For the phantom study, the mean landmark displacement of the proposed method was 1.29±0.11 mm. For the 5 patients, the mean landmark displacement of the surface-based method was 3.25±0.51 mm; our method, 1.71±0.25 mm. Therefore, our proposed method of prostate registration outperformed the surfaced-based registration significantly. Conclusion: We have developed a novel MR-TRUS prostate registration approach based on patient-specific biomechanical elasticity prior. Successful integration of multi-parametric MR and TRUS prostate images provides a prostate-cancer map for treatment planning, enables accurate dose planning and delivery, and potentially enhances prostate HDR treatment outcome.

60 APPLIED LIFE SCIENCES↗

TU-F-CAMPUS-J-03: Elasticity Functions Based On 4DCT Images to Predict Tumor and Normal Tissue Response to Radiation for Patients with Lung Cancers

Purpose: To investigate radiotherapy outcomes by incorporating 4DCT-based physiological and tumor elasticity functions for lung cancer patients. Methods: 4DCT images were acquired from 28 lung SBRT patients before radiation treatment. Deformable image registration (DIR) was performed from the end-inhale to the end-exhale using a B-Spline-based algorithm (Elastix, an open source software package). The resultant displacement vector fields (DVFs) were used to calculate a relative Jacobian function (RV) for each patient. The computed functions in the lung and tumor regions represent lung ventilation and tumor elasticity properties, respectively. The 28 patients were divided into two groups: 16 with two-year tumor local control (LC) and 12 with local failure (LF). The ventilation and elasticity related RV functions were calculated for each of these patients. Results: The LF patients have larger RV values than the LC patients. The mean RV value in the lung region was 1.15 (±0.67) for the LF patients, higher than 1.06 (±0.59) for the LC patients. In the tumor region, the elasticity-related RV values are 1.2 (±0.97) and 0.86 (±0.64) for the LF and LC patients, respectively. Among the 16 LC patients, 3 have the mean RV values greater than 1.0 in the tumors. These tumors were located near the diaphragm, where the displacements are relatively large.. RV functions calculated in the tumor were better correlated with treatment outcomes than those calculated in the lung. Conclusion: The ventilation and elasticity-related RV functions in the lung and tumor regions were calculated from 4DCT image and the resultant values showed differences between the LC and LF patients. Further investigation of the impact of the displacements on the computed RV is warranted. Results suggest that the RV images might be useful for evaluation of treatment outcome for lung cancer patients.

60 APPLIED LIFE SCIENCES↗

Pressure Dependences of Elastic Constants of AMg6 Aluminum–Magnesium Alloy and n-AMg6/С{sub 60} Nanocomposite Alloy

The ultrasonic study results for dependence of the elastic wave velocities and second-order elasticity coefficients of the polycrystalline aluminum alloy AMg6 and its nanocomposite n-AMg6/C{sub 60} on hydrostatic pressure up to 1.6 GPa have been described. The ultrasonic research has been carried out using a highpressure ultrasonic piezometer based on the piston-cylinder device. The pressure derivatives of the secondorder elastic constants of these materials established in the present study have been compared with the results of the third-order elastic constants measurements of the test alloys using the Thurston–Brugger method. Involving available literature data, we determined the relationships between the pressure derivatives of the second-order elastic constants of the AMg6 alloy and the Mg-content and nanostructuring.

36 MATERIALS SCIENCE↗

Finite-Temperature Behavior of PdH x Elastic Constants Computed by Direct Molecular Dynamics

In this paper, robust time-averaged molecular dynamics has been developed to calculate finite-temperature elastic constants of a single crystal. We find that when the averaging time exceeds a certain threshold, the statistical errors in the calculated elastic constants become very small. We applied this method to compare the elastic constants of Pd and PdH 0.6 at representative low (10 K) and high (500 K) temperatures. The values predicted for Pd match reasonably well with ultrasonic experimental data at both temperatures. In contrast, the predicted elastic constants for PdH 0.6 only match well with ultrasonic data at 10 K; whereas, at 500 K, the predicted values are significantly lower. We hypothesize that at 500 K, the facile hydrogen diffusion in PdH 0.6 alters the speed of sound, resulting in significantly reduced values of predicted elastic constants as compared to the ultrasonic experimental data. Finally, literature mechanical testing experiments seem to support this hypothesis.

36 MATERIALS SCIENCE↗

Indentation-derived elastic modulus of multilayer thin films: Effect of unloading induced plasticity

Nanoindentation is useful for evaluating the mechanical properties, such as elastic modulus, of multilayer thin film materials. A fundamental assumption in the derivation of the elastic modulus from nanoindentation is that the unloading process is purely elastic. In this work, the validity of elastic assumption as it applies to multilayer thin films is studied using the finite element method. The elastic modulus and hardness from the model system are compared to experimental results to show validity of the model. Plastic strain is shown to increase in the multilayer system during the unloading process. Additionally, the indentation-derived modulus of a monolayer material shows no dependence on unloading plasticity while the modulus of the multilayer system is dependent on unloading-induced plasticity. Lastly, the cyclic behavior of the multilayer thin film is studied in relation to the influence of unloading-induced plasticity. Furthermore, it is found that several cycles are required to minimize unloading-induced plasticity.

36 MATERIALS SCIENCE↗

Deuteron-Deuteron Elastic and Three and Four-Body Breakup Scattering Using the Faddeev-Yakubovskii Equations

The deuteron-deuteron elastic and three and four-body breakup scattering cross section have been calculated using the Faddeev-Yakubovskii (FY) chain-of-partition momentum-space equations. In this calculation the initial two-cluster potential is split into separable and non-separable components, and the effective potential is reduced to elastic two-body and three and four-body breakup open-channels and a closed-channel many-body contribution. The closed-channel contribution is determined by minimizing a variational bound. The Coulomb interaction was included by expanding the initial and final Coulomb states in a Coulomb-Sturmian basis. The three sets of chain-of-partition integral equations were solved for the elastic and three and four-body breakup scattering amplitudes. The calculations were performed for the S = 2 spin/L = 0 angular-momentum state. The elastic and double-breakup calculations were performed for energies up to E = 5.48 MeV, while the single-breakup calculations were performed for energies up to E = 4.17 MeV. In the case of elastic scattering, the calculated scattering length of 5 a dd = 7.8 ± 0.3 fm is in good agreement with a FY cluster reduction calculation. The calculated phase shift is smaller than that predicted by the resonating group model and this difference is believed to be due to the differences in the potential and calculation methods. The breakup cross sections were calculated as a function of initial deuteron momentum and fragmented-deuteron momentum. Here, the d+d → d+n+p cross sections were compared with neutron yield measurements and, while the measurements also included the L > 0 components, the general features were consistent. Estimates of the calculational uncertainties/bias are provided.

42 ENGINEERING↗

Probing hysteretic elasticity in weakly nonlinear materials

Our work is aimed at assessing the elastic and dissipative hysteretic nonlinear parameters' repeatability (precision) using several classes of materials with weak, intermediate and high nonlinear properties. In this contribution, we describe an optimized Nonlinear Resonant Ultrasound Spectroscopy (NRUS) measuring and data processing protocol applied to small samples. The protocol is used to eliminate the effects of environmental condition changes that take place during an experiment, and that may mask the intrinsic elastic nonlinearity. As an example, in our experiments, we identified external temperature fluctuation as a primary source of material resonance frequency and elastic modulus variation. A variation of 0.1 C produced a frequency variation of 0.01 %, which is similar to the expected nonlinear frequency shift for weakly nonlinear materials. In order to eliminate environmental effects, the variation in f{sub 0} (the elastically linear resonance frequency proportional to modulus) is fit with the appropriate function, and that function is used to correct the NRUS calculation of nonlinear parameters. With our correction procedure, we measured relative resonant frequency shifts of 10{sup -5} , which are below 10{sup -4}, often considered the limit to NRUS sensitivity under common experimental conditions. Our results show that the procedure is an alternative to the stringent control of temperature often applied. Applying the approach, we report nonlinear parameters for several materials, some with very small nonclassical nonlinearity. The approach has broad application to NRUS and other Nonlinear Elastic Wave Spectroscopy approaches.

58 GEOSCIENCES↗

Determination of the effective elastic coefficients for heterogeneous media - 15109

The effective elastic coefficients on the macro-scale for heterogeneous media are calculated by solving the micro-cell elasto-static problem numerically. The cell problem is obtained by applying the homogenization theory to periodic composite media. Two different types of inclusion geometry are considered: (i) a circle and (ii) a circle with longitudinal ribs of small rectangular cross-section. The deformation is caused by traction force distributed along the interface between the two regions of different elastic moduli. The displacements are calculated by using ABAQUS and are used to determine the effective elastic coefficients on the macro-scale. It is shown that the elastic coefficients are larger for (ii) than (i) due to the ribs thereby enhancing the elastic rigidity. (authors)

36 MATERIALS SCIENCE↗