Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “efficiency table”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Turnkey Heating, Ventilating, and Air Conditioning and Lighting Retrofit Solution Combining Energy Efficiency and Demand Response Benefits

NREL worked with the Bonneville Power Administration's Technology Innovation Office to demonstrate a turnkey, retrofit technology that combines demand response (DR) and energy efficiency (EE) benefits for HVAC and lighting in retail buildings. As a secondary benefit, we also controlled various plug loads and electric hot water heaters (EHWH). The technology demonstrated was Transformative Wave's eIQ Building Management System (BMS) automatically responding to DR signals. The BMS controlled the HVAC rooftop units (RTU) using the CATALYST retrofit solution also developed by Transformative Wave. The non-HVAC loads were controlled using both hardwired and ZigBee wireless communication. The wireless controllers, manufactured by Autani, were used when the building's electrical layout was too disorganized to leverage less expensive hardwired control. The six demonstration locations are within the Seattle metro area. Based on the assets curtailed by the BMS at each location, we projected the DR resource. We were targeting a 1.7 W/ft2 shed for the summer Day-Ahead events and a 0.7 W/ft2 shed for the winter events. While summarized in Table ES-1, only one summer DR event was conducted at Casino #2.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2018

NuGrid stellar data set – II. Stellar yields from H to Bi for stellar models with MZAMS = 1–25 M⊙ and Z = 0.0001–0.02

We provide here a significant extension of the NuGrid Set 1 models in mass coverage and towards lower metallicity, adopting the same physics assumptions. The combined data set now includes the initial masses M ZAMS /M ⊙ = 1, 1.65, 2, 3, 4, 5, 6, 7, 12, 15, 20, 25 for Z = 0.02, 0.01, 0.006, 0.001, 0.0001 with α-enhanced composition for the lowest three metallicities. These models are computed with the MESA stellar evolution code and are evolved up to the AGB, the white dwarf stage, or until core collapse. The nucleosynthesis was calculated for all isotopes in post-processing with the NuGrid MPPNP code. Explosive nucleosynthesis is based on semi-analytic 1D shock models. Metallicity-dependent mass-loss, convective boundary mixing in low- and intermediate-mass models and H and He core burning massive star models are included. Convective O-C shell mergers in some stellar models lead to the strong production of odd-Z elements P, Cl, K, and Sc. In AGB models with hot dredge-up, the convective boundary mixing efficiency is reduced to accommodate for its energetic feedback. In both low-mass and massive star models at the lowest metallicity, H-ingestion events are observed and lead to i-process nucleosynthesis and substantial 15 N production. Finally, complete yield data tables, derived data products and online analytic data access are provided.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

Business Case Analysis for Replacing the Mazak 30Y Mill-Turn Machine in SM-39. Summary

Business case studies are being looked at to support procurement of new machines and capital equipment in the SM-39 and TA-03-0102 machine shops. The first effort conducted economic analysis of replacing the Mazak 30Y Mill-Turn Machine located in SM-39. To determine the value of switching machinery, a baseline scenario was compared with a future scenario where new machinery was purchased and installed. The conditions under the two scenarios were defined via interviews with subject matter experts in terms of one-time and periodic costs. The results of the analysis were compiled in a life-cycle cost/benefit table. The costs of procuring, installing, and maintaining a new machine were balanced against the costs avoided by replacing older machinery. Productivity savings were included as a measure to show the costs avoided by being able to produce parts at a quicker and more efficient pace.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS2012

The Operational MODIS Cloud Optical and Microphysical Property Product: Overview of the Collection 6 Algorithm and Preliminary Results

Operational Moderate Resolution Imaging Spectroradiometer (MODIS) retrievals of cloud optical and microphysical properties (part of the archived products MOD06 and MYD06, for MODIS Terra and Aqua, respectively) are currently being reprocessed along with other MODIS Atmosphere Team products. The latest "Collection 6" processing stream, which is expected to begin production by summer 2012, includes updates to the previous cloud retrieval algorithm along with new capabilities. The 1 km retrievals, based on well-known solar reflectance techniques, include cloud optical thickness, effective particle radius, and water path, as well as thermodynamic phase derived from a combination of solar and infrared tests. Being both global and of high spatial resolution requires an algorithm that is computationally efficient and can perform over all surface types. Collection 6 additions and enhancements include: (i) absolute effective particle radius retrievals derived separately from the 1.6 and 3.7 !-lm bands (instead of differences relative to the standard 2.1 !-lm retrieval), (ii) comprehensive look-up tables for cloud reflectance and emissivity (no asymptotic theory) with a wind-speed interpolated Cox-Munk BRDF for ocean surfaces, (iii) retrievals for both liquid water and ice phases for each pixel, and a subsequent determination of the phase based, in part, on effective radius retrieval outcomes for the two phases, (iv) new ice cloud radiative models using roughened particles with a specified habit, (v) updated spatially-complete global spectral surface albedo maps derived from MODIS Collection 5, (vi) enhanced pixel-level uncertainty calculations incorporating additional radiative error sources including the MODIS L1 B uncertainty index for assessing band and scene-dependent radiometric uncertainties, (v) and use of a new 1 km cloud top pressure/temperature algorithm (also part of MOD06) for atmospheric corrections and low cloud non-unity emissivity temperature adjustments.

Platnick, Steven↗
DOE OSTI2025

Phenomena Identification and Ranking Table (PIRT) for Heat Pipes

This Phenomena Identification and Ranking Table (PIRT) report provides an evaluation of key phenomena affecting the performance and operational regimes of heat pipes, particularly in the context of heat pipe microreactors (HPMRs). Heat pipes are advanced passive thermal management devices that utilize phase change and capillary action to achieve efficient heat transfer. However, due to the complexity of the phenomena coupled in the heat pipe, including phase change, turbulent transition, and compressibility effects, among others, there is high uncertainty in identifying and ranking the important phenomena affecting the operation of heat pipes and the current knowledge for their modeling and simulation and experimental measurements and instrumentation. This PIRT exercise, conducted as a collaborative effort involving the Department of Energy (DOE) Microreactor Program (MRP), the Nuclear Regulatory Commission (NRC), and university partners systematically identifies, reviews, and prioritizes critical phenomena affecting the operation of heat pipes based on their importance and knowledge levels. The report analyzes phenomena with high importance and low knowledge, such as wick de-wetting, critical heat flux, contact angles, and pressure dynamics, discussing challenges and future research directions for improving their modeling and simulation and experimental measurements. Additionally, the report addresses phenomena with low knowledge that could impact heat pipe operation during non-normal or transient operation, including frozen startup, laminar to turbulent transition, geysering, wick priming, underfilling conditions, surface roughness of the wick, NCGs trapped in the wick, and the timescales of startup and shutdown. This comprehensive evaluation serves as a valuable resource for guiding future research and development efforts, supporting the successful integration of heat pipes into critical applications such as nuclear reactors, and contributing to the advancement of heat pipe technologies in safety-critical industries.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗
DOE OSTI2024

Interpreting the spatial distribution of soil properties with a physically-based distributed hydrological model

Digital soil maps are commonly data-driven as the development of physically-based models for soil mapping is difficult due to the complexity of soils. However, physically-based hydrologic models have been successful in simulating water dynamics. Since water movement is a major driver of pedogenesis, the physical rules that govern water movement might help explain and predict the spatial variation of soil properties. Here, we demonstrate the novel use of a physically-based, distributed hydrologic model to inform the spatial distribution of soil properties. The Distributed Hydrology Soil Vegetation Model (DHSVM) was utilized to simulate soil moisture content (SM) and water table depth (WTD) in two hillslope catchments under pasture and forest management wherein hydrologic model outputs were then compared with soil properties measured in situ. SM sensors and wells were installed in both catchments to validate simulations of soil water movement via Nash-Sutcliffe Efficiency (E). In-situ observations were made at 87 sites within both catchments to study the connection between simulated water movement (SM and WTD) and observed soil properties, namely the depth and thickness of the argillic (Bt), fragic (Btx), and C horizons, and the depth of redoximorphic features. The simulated time series of SM and WTD were also clustered per season using Dynamic Time Warping (DTW), which identified similarity among time series at varying timescales. Model validation suggested that simulations of surficial SM (0–20 cm) were reasonable (E = 0.45), however, simulated subsurface SM (45–60 cm) and WTD were not sufficiently accurate. The thickness of Btx horizons were spatially grouped into different populations by SM clusters from every season except spring. For the other properties, only SM dynamics of specific seasons grouped into significantly different populations, suggesting that the explanatory power of simulated water movement varies seasonally and was greater during winter. Here, we show clusters of simulated SM separated soil properties into statistically different populations, showing that hydrologic models could inform areas that followed different water dynamics related to pedogenic trajectories and related biogeochemical processes not necessarily simulated by the model. As such, physically-based modeling of water dynamics can, therefore, inform and advance digital soil mapping by linking water movement patterns stemming from hydrologic model outputs to spatial patterns of soil properties and pedogenesis.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Human Factors Evaluation of Energy Visualization Dashboards

Energy visualization systems provide information about use in real-time to assist users with energy efficiency. In this study, three energy visualization dashboards for small businesses were developed and tested. Performance measurement, NASA Task Load Index (TLX) workload assessment, and posttest survey were used to conduct the usability testing. Compared with the dashboards that were designed using line charts and tables, a dashboard designed using visuals (e.g., gauges, pie charts, and flashing lights) produced quicker response time, lower mental and temporal demand and effort ratings, and higher ratings of engagement, interest, and trustworthiness.

Nimbarte, Ashish D. (ORCID:0000000210599112)↗
DOE OSTI2013

Advancing Residential Retrofits in the Mixed-humid Climate to Achieve Deep Energy Savings: Final Report on Knoxville, TN Homes

To contribute to the Department of Energy goal of enabling cost effective energy retrofits with 50% source energy reduction of the residential house stock by 2030, Oak Ridge National Laboratory has spurred and analyzed residential retrofits in the mixed-humid climate around Knoxville, Tennessee. An in-depth description of all the homes in the study can be found in an interim report (Boudreaux et al. 2012) which includes descriptions of the implemented retrofits and their estimated energy savings and cost-effectiveness based on pre- and post-retrofit energy models. The aliases for the five homes are Baker, Country, Summit, Gaiter, and Green. Table ES-1 gives a qualitative view of the retrofit measures implemented at each home.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS1985

SPAR improved structural-fluid dynamic analysis capability

The results of a study whose objective was to improve the operation of the SPAR computer code by improving efficiency, user features, and documentation is presented. Additional capability was added to the SPAR arithmetic utility system, including trigonometric functions, numerical integration, interpolation, and matrix combinations. Improvements were made in the EIG processor. A processor was created to compute and store principal stresses in table-format data sets. An additional capability was developed and incorporated into the plot processor which permits plotting directly from table-format data sets. Documentation of all these features is provided in the form of updates to the SPAR users manual.

Pearson, M. L.↗
NASA NTRS1991

Calculations of transmission functions in the infrared CO2 and O3 bands

An efficient method for computing the transmission function in the 15-micron CO2 and the 9.6-micron O3 bands is presented. An inhomogeneous atmospheric path is treated as homogeneous by applying simple pressure and temperature scaling approximations. The transmission functions are then derived from small precomputed tables. Because the atmospheric cooling rate is primarily contributed from adjacent layers, the simple scaling approximations can be used to accurately compute transmission functions in both the middle and lower atmosphere. Applying the parameterization to vastly different atmospheric conditions, the difference with line-by-line calculations is small. In the region between 0.01 mbar and the earth's surface, the cooling rate difference is less than 0.3 C/d in the 15-micron CO2 band and less than 0.1 C/d in the 9.6-micron O3 band.

Chou, Ming-Dah↗
NASA NTRSDate not supplied

Surviving and Thriving in Space and on Earth's Oceans - Human Logistics and Sustainability Comparisons and Considerations

The human species has a yearning for exploration as evidenced by the extensive historical ocean voyages and expeditions which have led to a massive advancement in the scientific and geodetic knowledge about planet Earth. These global explorations via the oceans have also had strategic, economic, cultural and religious implications and impacts, which have drastically changed the state of humanity and its condition. The transportation network created by ships traveling across the oceans has been supplemented by other transportation networks on land and in the air, creating a global economy that, in general, has improved the human condition leading to better health, longer lives, lower child mortality, better education, political freedom, higher gross national product (GNP) and improved hygiene. The logical extension of this societal trend is to extend the transportation network and human civilization into outer space, beyond the cradle of planet Earth. Our solar system contains vast amounts of natural resources which can be harnessed and used to bootstrap a space economy and related infrastructure by using advanced technologies. Sailing journeys from hundreds of years ago required large vessels and large crews, (in comparison with today’s space capsules). Modern sailors of today are able to complete large voyages, in small vessels, with a minimal crew, comparable in magnitude to modern space travel. This paper will use a systems engineering approach (e.g. using the NASA Human Integration Design Handbook (HIDH), NASA-SP-2010-3407, 2010 and the “Advanced Life Support Baseline Values and Assumptions Document, (BVAD)” NASA-CR-2004-208941, 2004.), to examine and compare the logistics and sustainability aspects of a small crew traveling on Earth's oceans in sailing vessels versus humans traveling in space. The “Mālama Honua Worldwide Voyage” of the Hokule’a, a replica of an ancient Hawaiian double hulled sailing canoe, will be used as a case study. This is the best comparison case since the Polynesian exploration of the vast (and virtually empty) Pacific Ocean is the closest analogue to modern space travel. “"Both are voyages of exploration.” –Shuttle astronaut Lacy Veach. Minimizing waste and maximizing re-use and re-cycling will lead to more efficient logistics and sustainability. In addition, In-Situ Resource Utilization (ISRU) strategies, based on successful Earth based strategies used for many years by sailors will be considered and evaluated for their usefulness. For example, human logistics for a typical space mission are shown in Table 1 and Table 2 (Lopez et al, 2015). Studies show that typical human water consumption in space is projected to be 3.2 kg/day per crew member as shown in Table 2. Data from human sailing voyages around the globe will be examined. Anecdotal evidence indicates that knowledgeable and well-equipped modern sailors, who conserve water, can comfortably live using 1.5 to 5 kg/day per person. This paper will investigate key logistics and sustainability aspects of living in space and compare them quantitatively to similar aspects of living on ocean faring sailing vessels on Earth. Mutually beneficial observations, advanced technologies and modern considerations will be applied within confines of a remote sailing environment, which could be of immense value to both the space faring community and the ocean sailing community.

Space↗
DOE OSTI2010

Biomass Energy Data Book: Edition 3

The Biomass Energy Data Book is a statistical compendium prepared and published by Oak Ridge National Laboratory (ORNL) under contract with the Biomass Program in the Energy Efficiency and Renewable Energy (EERE) program of the Department of Energy (DOE). Designed for use as a convenient reference, the book represents an assembly and display of statistics and information that characterize the biomass industry, from the production of biomass feedstocks to their end use, including discussions on sustainability. This is the third edition of the Biomass Energy Data Book which is only available online in electronic format. There are five main sections to this book. The first section is an introduction which provides an overview of biomass resources and consumption. Following the introduction to biomass, is a section on biofuels which covers ethanol, biodiesel and bio-oil. The biopower section focuses on the use of biomass for electrical power generation and heating. The fourth section is on the developing area of biorefineries, and the fifth section covers feedstocks that are produced and used in the biomass industry. The sources used represent the latest available data. There are also four appendices which include frequently needed conversion factors, a table of selected biomass feedstock characteristics, and discussions on sustainability. A glossary of terms and a list of acronyms are also included for the reader's convenience.

09 BIOMASS FUELS↗
DOE OSTI2018

Tensor network method for reversible classical computation

We develop a tensor network technique that can solve universal reversible classical computational problems, formulated as vertex models on a square lattice [Nat. Commun. 8, 15303 (2017)]. By encoding the truth table of each vertex constraint in a tensor, the total number of solutions compatible with partial inputs and outputs at the boundary can be represented as the full contraction of a tensor network. We introduce an iterative compression-decimation (ICD) scheme that performs this contraction efficiently. The ICD algorithm first propagates local constraints to longer ranges via repeated contraction-decomposition sweeps over all lattice bonds, thus achieving compression on a given length scale. It then decimates the lattice via coarse-graining tensor contractions. Repeated iterations of these two steps gradually collapse the tensor network and ultimately yield the exact tensor trace for large systems, without the need for manual control of tensor dimensions. Our protocol allows us to obtain the exact number of solutions for computations where a naive enumeration would take astronomically long times.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

End-to-End Workflow for Machine-Learning-Based Qubit Readout With QICK and hls4ml

In this article, we present an end-to-end workflow for superconducting qubit readout that embeds codesigned neural networks into the quantum instrumentation control kit (QICK). Capitalizing on the custom firmware and software of the QICK platform, which is built on Xilinx radiofrequency system-on-chip field-programmable gate arrays (FPGAs), we aim to leverage machine learning (ML) to address critical challenges in qubit readout accuracy and scalability. The workflow utilizes the hls4ml package and employs quantization-aware training to translate ML models into hardware-efficient FPGA implementations via user-friendly Python application programming interfaces. We experimentally demonstrate the design, optimization, and integration of an ML algorithm for single transmon qubit readout, achieving 96% single-shot fidelity with a latency of 32.25 ns and less than 16% FPGA lookup table resource utilization. Our results offer the community an accessible workflow to advance ML-driven readout and adaptive control in quantum information processing applications.

42 ENGINEERING↗
DOE OSTI2015

SU-E-T-241: Design and Implement of An Information Management System for Radiation Workers in a Hospital

Purpose: To meet the special needs of Medical Administration Division, an information management system for radiation workers in a hospital(IMSRWH) has been developed. Methods: There are about 200 radiation workers in 20 departments, such as department of radiology, department of radiation oncology, department of nuclear medicine, and so on. An IMSRWH server was used to run a database and web service of Apache+PHP+MySQL. The IMSRWH web service could be accessed with Internet Explorer(IE) to input, search, count, and print the radiation workers’ data. Every worker’s data information includes the following tables: registration, personal dose monitoring records, personnel certificate, training certificate, personnel license, medical examination, etc, and each table includes more optional detail information. Results: In the past year, the IMSRWH has been successfully developed and implemented in the hospital. According to the needs, the user rights are divided into: the system administrator, office manager, department manager and radiation worker. The different users have the different interfaces, and the appropriate authority permissions mean corresponding operations. The administrator and office manager could manage all personnel information, department manager could manage the staff information of his department, and the workers could view or modify their own information. Because information updates, involving hundreds of each entry and modification are complicated, each table information of all workers can be batch import from or export to a Microsoft Excel CSV format file, to update all together. However, it has only Chinese version now. Conclusion: It was demonstrated to be user-friendly and was proven to significantly improve the efficiency of the hospital management. Since it is an in-house developed system, more functions can be added or modified to further enhance its potentials in research and clinical practice.

60 APPLIED LIFE SCIENCES↗
NASA NTRS1991

Stellar turbulent convection - A new model and applications

Improvements of the mixing-length theory (MLT) of turbulent convection in stellar atmospheres are developed theoretically. It is pointed out that inaccuracies are introduced into MLT by the approximating assumptions of a single large eddy (rather than many eddies of different sizes) and of incompressibility. In the proposed new model, the full spectrum of turbulent eddies is determined using more recent turbulence models (e.g., the eddy-damped quasi-normal Markovian model of Orszag, 1977), and a new formula for the convective flux is obtained which gives values up to 10 times greater than those of the MLT at high convective efficiencies. The problem of compressibility is addressed by adding one of two new expressions (one with no free parameters) for the mixing length. Numerical results from simulations of a solar-type star and a 0.8-solar-mass globular-cluster star are presented in tables and graphs and discussed in detail; the agreement with observations is found to be better than with the MLT.

Canuto, V. M.↗
NASA NTRS2003

Status of the NEXT Ion Engine Wear Test

The status of the NEXT 2000 hour wear test is presented. This test is being conducted with a 40 cm engineering model ion engine, designated EM1, at a beam current higher than listed on the NEXT throttle table. Pretest performance assessments demonstrated that EM1 satisfies all thruster performance requirements. As of 7/3/03, the ion engine has accumulated 406 hours of operation at a thruster input power of 6.9 kW. Overall ion engine performance, which includes thrust, thruster input power, specific impulse, and thrust efficiency, has been steady to date with no indications of performance degradation. Images of the downstream discharge cathode, neutralizer, and accelerator aperture surfaces have exhibited no significant erosion to date.

Soulas, George C.↗
DOE OSTI2011

Parallel-vector algorithms for particle simulations on shared-memory multiprocessors

Over the last few decades, the computational demands of massive particle-based simulations for both scientific and industrial purposes have been continuously increasing. Hence, considerable efforts are being made to develop parallel computing techniques on various platforms. In such simulations, particles freely move within a given space, and so on a distributed-memory system, load balancing, i.e., assigning an equal number of particles to each processor, is not guaranteed. However, shared-memory systems achieve better load balancing for particle models, but suffer from the intrinsic drawback of memory access competition, particularly during (1) paring of contact candidates from among neighboring particles and (2) force summation for each particle. Here, novel algorithms are proposed to overcome these two problems. For the first problem, the key is a pre-conditioning process during which particle labels are sorted by a cell label in the domain to which the particles belong. Then, a list of contact candidates is constructed by pairing the sorted particle labels. For the latter problem, a table comprising the list indexes of the contact candidate pairs is created and used to sum the contact forces acting on each particle for all contacts according to Newton's third law. With just these methods, memory access competition is avoided without additional redundant procedures. The parallel efficiency and compatibility of these two algorithms were evaluated in discrete element method (DEM) simulations on four types of shared-memory parallel computers: a multicore multiprocessor computer, scalar supercomputer, vector supercomputer, and graphics processing unit. The computational efficiency of a DEM code was found to be drastically improved with our algorithms on all but the scalar supercomputer. Thus, the developed parallel algorithms are useful on shared-memory parallel computers with sufficient memory bandwidth.

97 MATHEMATICS AND COMPUTING↗