Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “edge inference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

Water in the Oceanic Lithosphere: Salt Lake Crater Xenoliths, Oahu, Hawaii

Water can be present in nominally anhydrous minerals of peridotites in the form of hydrogen bonded to structural oxygen. Such water in the oceanic upper mantle could have a significant effect on its physical and chemical properties. However, the water content of the MORB source has been inferred indirectly from the compositions of basalts. Direct determinations on abyssal peridotites are scarce because they have been heavily hydrothermally altered. Here we present the first water analyses of minerals from spinel peridotite xenoliths of Salt Lake Crater, Oahu, Hawaii, which are exceptionally fresh. These peridotites are thought to represent fragments of the Pacific oceanic lithosphere that was refertilized by alkalic Hawaiian melts. A few have unradiogenic Os and radiogenic Hf isotopes and may be fragments of an ancient (~2 Ga) depleted and recycled lithosphere. Water contents in olivine (Ol), orthopyroxene (Opx), and clinopyroxene (Cpx) were determined by FTIR spectrometry. Preliminary H_{2}O contents show ranges of 8-10 ppm for Ol, 151-277 ppm for Opx, and 337-603 ppm for Cpx. Reconstructed bulk rock H_{2}O contents range from 88-131 ppm overlapping estimates for the MORB source. Water contents between Ol minerals of the same xenolith are heterogeneous and individual OH infrared bands vary within a mineral with lower 3230 cm^{-1} and higher 3650-3400 cm^{-1} band heights from core to edge. This observation suggests disturbance of the hydrogen in Ol likely occurring during xenolith entrainment to the surface. Pyroxene water contents are higher than most water contents in pyroxenes from continental peridotite xenoliths and higher than those of abyssal peridotites. Cpx water contents decrease with increasing degree of depletion (e.g. increasing Fo in Ol and Cr# in spinel) consistent with an incompatible behavior of water. However Cpx water contents also show a positive correlation with LREE/HREE ratios and LREE concentrations consistent with refertilization. Opx water contents increase with increasing degree of depletion and decrease with LREE/HREE ratios which is inconsistent with the incompatible behavior of H. Calculated water contents of melts in equilibrium with Cpx or Opx range from 1.4 to 3.8 wt % which is higher than that of all Hawaiian lavas. Calculated melts in equilibrium with Cpx and Opx have variable but mostly high H_{2}O/Ce ratios (194 to 1146) consistent with those of rejuvenated stage lavas from Niihau and the South Arch volcanic field, but unlike the drier shield building stage tholeiites. Whether the high water contents recorded in Salt Lake Crater xenoliths were acquired before and/or during interaction of the oceanic lithosphere with the Hawaiian plume will be discussed.

Peslier, Anne H.↗
DOE OSTI2021

WHISPER: Wireless Home Identification and Sensing Platform for Energy Reduction

Many regions of the world benefit from heating, ventilating, and air-conditioning (HVAC) systems to provide productive, comfortable, and healthy indoor environments, which are enabled by automatic building controls. Due to climate change, population growth, and industrialization, HVAC use is globally on the rise. Unfortunately, these systems often operate in a continuous fashion without regard to actual human presence, leading to unnecessary energy consumption. As a result, the heating, ventilation, and cooling of unoccupied building spaces makes a substantial contribution to the harmful environmental impacts associated with carbon-based electric power generation, which is important to remedy. For our modern electric power system, transitioning to low-carbon renewable energy is facilitated by integration with distributed energy resources. Automatic engagement between the grid and consumers will be necessary to enable a clean yet stable electric grid, when integrating these variable and uncertain renewable energy sources. We present the WHISPER (Wireless Home Identification and Sensing Platform for Energy Reduction) system to address the energy and power demand triggered by human presence in homes. The presented system includes a maintenance-free and privacy-preserving human occupancy detection system wherein a local wireless network of battery-free environmental, acoustic energy, and image sensors are deployed to monitor homes, record empirical data for a range of monitored modalities, and transmit it to a base station. Several machine learning algorithms are implemented at the base station to infer human presence based on the received data, harnessing a hierarchical sensor fusion algorithm. Results from the prototype system demonstrate an accuracy in human presence detection in excess of 95%; ongoing commercialization efforts suggest approximately 99% accuracy. Using machine learning, WHISPER enables various applications based on its binary occupancy prediction, allowing situation-specific controls targeted at both personalized smart home and electric grid modernization opportunities.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS1990

A multi-frequency study of the peculiar interacting system Arp 206

Arp 206 is a nearby, relatively large, and bright interacting system comprising unequal members: NGC 3432 and UGC 5983. A third anonymous galaxy, Arp 206c, is visible in the field. The CCD images show a well-developed bridge between NGC 3432 and UGC 5983. On the other hand, the complex H I tails are not visible in the optical. In the total H I map, the bridge is lost in a general envelope encompassing both galaxies. The bridge also appears to have some radio emission. On the Total H I map the system is rather edge-on, far more than it would appear in optical wavelengths. UGC 5983 falls exactly in line with NGC 3432. The velocity of the centers of mass of NGC 3432 and UGC 5983 are 530 km s(exp -1) and 630 km s(exp -1), respectively. In view of the considerable damage sustained by NGC 3432 and the apparent low mass of UGC 5983, it appears that the passage must have been at near parabolic speed, with a small pericentric distance and a very low inclination with rspect to the disk of NGC 3432. The apparent distribution of H I along the z axis of the galaxy could be accounted for by projection effects. The tidal appendage found at higher velocities, which rises at a P.A. approx. equal to 25 degrees west of the main body of the galaxy is probably the tail, the part of the tidal damage away from the perturbing companion. The bridge may be rising north-east from the galaxy and then continue under to the south of the galaxy. The relative sizes of the appendages would indicate that the pericenter was crossed recently. Any further inferences about the collision parameters will need to await the results of detailed computational modelling of the interaction. The authors also summarize the observational characteristics of NGC 3432, UGC 5983, and Arp 206c.

Noreau, Louis↗
NASA NTRS1998

Inferences About the Early Moon From Gravity and Topography

Recent spacecraft missions to the Moon have significantly improved our knowledge of the lunar gravity and topography fields, and have raised some new and old questions about the early lunar history. It has frequently been assumed that the shape of the Moon today reflects an earlier equilibrium state and that the Moon has retained some internal strength. Recent analysis indicating a superisostatic state of some lunar basins lends support to this hypothesis. On its simplest level, the present shape of the Moon is slightly flattened by 2.2 +/- 0.2 km while its gravity field, represented by an equipotential surface, is flattened only about 0.5 km. The hydrostatic component to the flattening arising from the Moon's present day rotation contributes only 7 m. This difference between the topographic shape of the MOon and the shape of its gravitational equipotential has frequently been explained as the "memory" of an earlier moon that was rotating faster and had a correspondingly larger hydrostatic flattening. To obtain this amount of hydrostatic flattening from rotation alone, and accounting for the contribution of the present-day gravity field, the Moon's rotation rate would need to be about 15x greater than at present, leading ot a period of < 2 days. Maintaining its synchronous rotation with Earth would require a radius for the Moon's orbit of approximately 9 Earth Radii. Unfortunately, our confidence in the observed lunar flattening is not as great as we would like. The uncertainty of .02 km may not properly reflect the limitations of the Clementine dataset, which did not sample poleward of latitudes 81 N and 79 S. Also, the large variation of topography +/- 8 km seen on the MOon dwarfs our estimate fo the flattening. Further the lunar south pole is on the edge of, or possibly inside the massive deep, South Pole-Aitken Basin. Thus, polar radii could be underestimated. This would yield a smaller flattening, which would imply a greater lunar rotation period and orbital radius. However, Basin compensation states and analyses of support and relaxation of topography at long wavelengths point to a lunar shape that has retained a flattening from an earlier faster rotation period.

Smith, D. E.↗
DOE OSTI2026

Role of Surface Hydroxyls and Lattice Oxygen in Governing Selectivity and Restructuring During Acetic Acid Conversion on Fe 3 O 4 (001)

Understanding the reactivity of carboxylic acids on metal oxide surfaces is critical for elucidating ketonization mechanisms relevant to biomass upgrading. Here, we investigate the adsorption and thermal decomposition of acetic acid (CH 3 COOH) on Fe 3 O 4 (001) using scanning tunneling microscopy (STM), temperature-programmed reaction spectroscopy (TPRS), and X-ray photoelectron spectroscopy (XPS). At room temperature, acetic acid adsorbs dissociatively to form ordered bidentate acetate (CH 3 COO) overlayer that lifts the (√2 × √2)R 45° surface reconstruction. TPRS reveals ketene (CH 2 CO) as the dominant product, along with CO, CO 2 , and H 2 O, the latter evolving via a Mars–van Krevelen (MvK) mechanism. Isotopic labeling shows preferential CO 2 formation from the carboxyl carbon and a more balanced CO/CO 2 ratio from the methyl carbon, suggesting distinct oxidation pathways. STM imaging reveals embedded acetate intermediates filling surface oxygen vacancies created in MvK steps. Upon product formation completion (~700 K), extensive surface etching is observed, with pits elongated along the octahedral Fe rows. Approximately 20% of the surface oxygen is removed, consistent with vacancy formation stoichiometry inferred from product distributions. These findings demonstrate that carboxylate-induced restructuring of Fe 3 O 4 (001) involves both surface healing and reduction processes, offering mechanistic insights relevant to ketonization and broader carboxylic acid chemistry on metal oxides.

acetic acid↗
NASA NTRS2011

Modelling the Huge, Herschel-Resolved Debris Ring around HD 207129

Debris disks, which are inferred from the observed infrared excess to be ensembles of dust, rocks. and probably planetesimals, arc common features of stellar systems. As the mechanisms of their fonnation and evolution are linked to those of planetary bodies, they provide valuable infonnation. The few well-resolved debris disks are even more valuable because they can serve as modelling benchmarks and help resolve degeneracies in modelling aspects such as typical grain sizes and distances. Here, we present an analysis of the HD 207129 debris disk, based on its well-covered spectral energy distribution and Herschel/PACS images obtained in the framework of the DUNES (DUst around NEarby Stars) programme. We use an empirical power-law approach to the distribution of dust and we then model the production and removal of dust by means of collisions, direct radiation pressure, and drag forces. The resulting best-fit model contains a total of nearly 10(sup -2) Earth masses in dust, with typical grain sizes in the planetesimal beh ranging from 4 to 7 micrometers. We constrain the dynamical excitation to be low, which results in very long collisional lifetimes and a drag that notably fills the inner gap, especially at 70 micrometers. The radial distribution stretches from well within 100 AU in an unusual, outward-riSing slope towards a rather sharp outer edge at about 170-190 AU. The inner edge is therefore smoother than that reported for Fomalhaut, but the contribution from the extended halo of barely bound grains is similarly small. Both slowly self-stirring and planetary perturbations could potentially have formed and shaped this disk.

Lohne, T.↗
DOE OSTI2025

Geometric GNNs for charged particle tracking at GlueX

Nuclear physics experiments are aimed at uncovering the fundamental building blocks of matter. The experiments involve high-energy collisions that produce complex events with many particle trajectories. Tracking charged particles resulting from collisions in the presence of a strong magnetic field is critical to enable the reconstruction of particle trajectories and precise determination of interactions. It is traditionally achieved through combinatorial approaches that scale worse than linearly as the number of hits grows. Since particle hit data naturally form a point cloud and can be structured as graphs, graph neural networks (GNNs) emerge as an intuitive and effective choice for this task. In this study, we evaluate the GNN model for track finding on the data from the GlueX experiment at Jefferson Lab. We use simulation data to train the model and test on both simulation and real GlueX measurements. We demonstrate that GNN-based track finding outperforms the currently used traditional method at GlueX in terms of segment-based efficiency at a fixed purity while providing faster inferences. We show that the GNN model can achieve significant speedup by processing multiple events in batches, which exploits the parallel computation capability of graphical processing units (GPUs). Finally, we compare the GNN implementation on GPU and field-programmable gate array and describe the trade-off.

batched GNN pipeline↗
NASA NTRS1995

Cloud Ozone Dust Imager (CODI): Investigation and Technical Plan - Volume 1

The Cloud Ozone Dust Imager (CODI) is proposed to investigate the current climatic balance of the Mars atmosphere, with particular emphasis on the important but poorly understood roles which dust and water ice aerosols play in this balance. The large atmospheric heating (20-50 K) resulting from global dust storms around Mars perihelion is well recognized. However, groundbased observations of Mars atmospheric temperatures, water vapor, and clouds since the Viking missions have identified a much colder, cloudier atmosphere around Mars aphelion that may prove as important as global dust storms in determining the interannual and long-term behavior of the Mars climate. The key climate issues CODI is designed to investigate are: 1) the degree to which non-linear interactions between atmospheric dust heating, water vapor saturation, and cloud nucleation influence the seasonal and interannual variability of the Mars atmosphere, and 2) whether the strong orbital forcing of atmospheric dust loading, temperatures and water vapor saturation determines the long-term balance of Mars water, as reflected in the north-south hemispheric asymmetries of atmospheric water vapor and polar water ice abundances. The CODI experiment will measure the daily, seasonal and (potentially) interannual variability of atmospheric dust and cloud opacities, and the key physical properties of these aerosols which determine their role in the climate cycles of Mars. CODI is a small (1.2 kg), fixed pointing camera, in which four wide-angle (+/- 70 deg) lenses illuminate fixed filters and CCD arrays. Simultaneous sky/surface imaging of Mars is obtained at an angular resolution of 0.28 deg/pixel for wavelengths of 255, 336, 502, and 673 nm (similar to Hubble Space Telescope filters). These wavelengths serve to measure atmospheric ozone (255 and 336 nm), discriminate ice and dust aerosols (336 and 673 nm), and construct color images (336, 502, and 673 nm). The CODI images are detected on four 512 x 512 pixel arrays, as partitioned on two 1024 x 1024 CCD's operated in frame transfer mode. The center of the CODI field-of-view is canted 40 deg from the zenith direction to obtain sky brightness measurements and a 20 deg surface field-of-view. Daily image observations will be conducted when the Sun is greater than or equal to 5 deg outside the edge of the CODI field-of-view, and twilight and nighttime imaging will obtained on a weekly basis. The 673 nm channel includes a polarizer wheel to obtain sky/surface polarimetry. A dust cover protects the entire lens assemblies of all four CODI channels. This opaque dust cover, which is normally opened for CODI imaging, includes a small fixed mirror and transparent window positioned above the 673 nm lens, to redirect the 673 nm field-of-view to the surface for descent imaging. Fixed pointing, internal data buffering, low operating power (2-4 W for less than or equal to 30 seconds), selective data transmission, and simple operational characteristics of the CODI experiment place minimum resource and operational demands on the Mars Surveyor 1998 lander. The CODI science goals are optimized for, but not restricted to, a low-latitude landing site (20 deg S-30 deg N). The primary CODI measurement objectives are the opacities, wave forms, particle properties (size, shape, and alignment), and heights of clouds; the opacities, particle properties, and vertical distribution of dust; and the opacity and vertical distribution of ozone. The variability of cloud, ozone, and dust opacities will be determined on diurnal, daily, and seasonal timescales. Wind velocities will be determined from cloud motions and wave characteristics; and the temporal variability of atmospheric water vapor, with limited altitude information, will be inferred from the CODI ozone observations. Secondary measurement objectives include limited descent imaging capability, surface uv-visible photometry and polarimetry, photochemistry, and meteorite infall rates.

Clancy, R. Todd↗
NASA NTRS1993

The interaction of plume heads with compositional discontinuities in the Earth's mantle

The effects of compositional discontinuities of density and viscosity in the Earth's mantle on the ascent of mantle plume heads is studied using a boundary integral numerical technique. Three specific problems are considered: (1) a plume head rising away from a deformable interface, (2) a plume head passing through an interface, and (3) a plume head approaching the surface of the Earth. For the case of a plume attached to a free-surface, the calculated time-dependent plume shapesare compared with experimental results. Two principle modes of plume head deformation are observed: plume head elingation or the formation of a cavity inside the plume head. The inferred structure of mantle plumes, namely, a large plume head with a long tail, is characteristic of plumes attached to their source region, and also of buoyant material moving away from an interface and of buoyant material moving through an interface from a high- to low-viscosity region. As a rising plume head approaches the upper mantle, most of the lower mantle will quickly drain from the gap between the plume head and the upper mantle if the plume head enters the upper mantle. If the plume head moves from a high- to low-viscosity region, the plume head becomes significantly elongated and, for the viscosity contrasts thought to exist in the Earth, could extend from the 670 km discontinuity to the surface. Plume heads that are extended owing to a viscosity decrease in the upper mantle have a cylindrical geometry. The dynamic surface topography induced by plume heads is bell-shaped when the top of the plume head is at depths greater than about 0.1 plume head radii. As the plume head approaches the surface and spreads, the dynamic topography becomes plateau-shaped. The largest stresses are produced in the early stages of plume spreading when the plume head is still nearly spherical, and the surface expression of these stresses is likely to be dominated by radial extension. As the plume spreads, compressional stresses on the surface are produced beyond the edges of the plume; consequently, extensional features will be produced above the plume head and may be surrounded by a ring of compressional features.

Manga, Michael↗
DOE OSTI2021

Coupling 1D xRAGE simulations with machine learning for graded inner shell design optimization in double shell capsules

Advances in machine learning provide the ability to leverage data from expensive simulations of high-energy-density experiments to significantly cut down on computational time and costs associated with the search for optimal target designs. This study presents an application of cutting-edge Bayesian optimization methods to the one-dimensional (1D) design optimization of double shell graded layer targets for inertial confinement fusion experiments. This investigation attempts to reduce hydrodynamic instabilities while retaining high yields for future NIF experiments. Machine learning methods can use predictive physics simulations to identify graded layer designs from within the vast design space that demonstrate high predicted performance, including novel designs with high uncertainty in performance that may hold unexpected promise. By applying machine learning tools to the simulation design, we map the trade-off between 1D yield and instability, specifically isolating parameter ranges, which maintain high performance while showing significantly improved Rayleigh–Taylor stability over the point design. Furthermore, the groundwork laid in this study will be a useful design tool for future NIF experiments with graded layer targets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2021

Pluto’s Sputnik Planitia: Composition of geological units from infrared spectroscopy

We have compared spectroscopic data of Sputnik Planitia on Pluto, as acquired by New Horizons’ Linear Etalon Imaging Spectral Array (LEISA) instrument, to the geomorphology as mapped by White et al. (2017) using visible and panchromatic imaging acquired by the LOng-Range Reconnaissance Imager (LORRI) and the Multi-spectral Visible Imaging Camera (MVIC). We have focused on 13 of the geologic units identified by White et al. (2017), which include the plains and mountain units contained within the Sputnik basin. We divided the map of Sputnik Planitia into 15 provinces, each containing one or more geologic units, and we use LEISA to calculate the average spectra of the units inside the 15 provinces. Hapke-based modeling was then applied to the average spectra of the units to infer their surface composition, and to determine if the composition resulting from the modeling of LEISA spectra reflects the geomorphologic analyses of LORRI data, and if areas classified as being the same geologically, but which are geographically separated, share a similar composition. We investigated the spatial distribution of the most abundant ices on Pluto’s surface - CH4, N2, CO, H2O, and a non-ice component presumed to be a macromolecular carbon-rich material, termed a tholin, that imparts a positive spectral slope in the visible spectral region and a negative spectral slope longward of ~1.1 μm. Because the exact nature of the non-ice component is still debated and because the negative spectral slope of the available tholins in the near infrared does not perfectly match the Pluto data, for spectral modeling purposes we reference it generically as the negative spectral slope endmember (NSS endmember). We created maps of variations in the integrated band depth (from LEISA data) and areal mass fraction (from the modeling) of the components. The analysis of correlations between the occurrences of the endmembers in the geologic units led to the observation of an anomalous suppression of the strong CH4 absorption bands in units with compositions that are dominated by H2O ice and the NSS endmember. Exploring the mutual variation of the CH4 and N2 integrated band depths with the abundance of crystalline H2O and NSS endmember revealed that the NSS endmember is primarily responsible for the suppression of CH4 absorptions in mountainous units located along the western edge of Sputnik Planitia. Our spectroscopic analyses have provided additional insight into the geological processes that have shaped Sputnik Planitia. A general increase in volatile abundance from the north to the south of Sputnik Planitia is observed. Such an increase first observed and interpreted by Protopapa et al., 2017 and later confirmed by climate modeling (Bertrand et al., 2018) is expressed geomorphologically in the form of preferential deposition of N2 ice in the upland and mountainous regions bordering the plains of southern Sputnik Planitia. Relatively high amounts of pure CH4 are seen at the southern Tenzing Montes, which are a natural site for CH4 deposition owing to their great elevation and the lower insolation they are presently receiving. The NSS endmember correlates the existence of tholins within certain units, mostly those coating the low-latitude mountain ranges that are co-latitudinal with the tholin-covered Cthulhu Macula. The spectral analysis has also revealed compositional differences between the handful of occurrences of northern non-cellular plains and the surrounding cellular plains, all of which are located within the portion of Sputnik Planitia that is presently experiencing net sublimation of volatiles, and which do not therefore exhibit a surface layer of bright, freshly-deposited N2 ice. The compositional differences between the cellular and non-cellular plains here hint at the effectiveness of convection in entraining and trapping tholins within the body of the cellular plains, while preventing the spread of such tholins to abutting non-cellular plains.

Pluto's Sputnik Planitia↗
DOE OSTI2024

Reconstruction and interpretation of ionization asymmetry in magnetic confinement via synthetic diagnostics

Abstract Strong poloidal refueling asymmetry in the DIII-D tokamak is inferred from line radiation measurements. Synthetic diagnostics in neutral transport modeling coupled to gyrokinetic simulations illuminate implications for the plasma flow profile in the scrape-off layer of single-null beam-driven discharges. Recycling occurs primarily either on the inner or outer divertor legs, depending on the toroidal magnetic field direction. By reversing the toroidal magnetic field, the observed line radiation asymmetry is nearly eliminated or reversed. It is determined that, while relatively simple physics can describe the observed ionization asymmetry, predicting the overall brightness of the hydrogenic Lyman- α signal requires detailed simulation of the plasma and resulting turbulence. To this end, kinetic plasma simulations fully coupled to comprehensive neutral transport calculations—a novel capability—provide first-principles reproduction of Lyman- α observations on DIII-D.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Towards the spatial resolution of metalloprotein charge states by detailed modeling of XFEL crystallographic diffraction

Oxidation states of individual metal atoms within a metalloprotein can be assigned by examining X-ray absorption edges, which shift to higher energy for progressively more positive valence numbers. Indeed, X-ray crystallography is well suited for such a measurement, owing to its ability to spatially resolve the scattering contributions of individual metal atoms that have distinct electronic environments contributing to protein function. However, as the magnitude of the shift is quite small, about +2 eV per valence state for iron, it has only been possible to measure the effect when performed with monochromated X-ray sources at synchrotron facilities with energy resolutions in the range 2–3 × 10 −4 (Δ E / E ). This paper tests whether X-ray free-electron laser (XFEL) pulses, which have a broader bandpass (Δ E / E = 3 × 10 −3 ) when used without a monochromator, might also be useful for such studies. The program nanoBragg is used to simulate serial femtosecond crystallography (SFX) diffraction images with sufficient granularity to model the XFEL spectrum, the crystal mosaicity and the wavelength-dependent anomalous scattering factors contributed by two differently charged iron centers in the 110-amino-acid protein, ferredoxin. Bayesian methods are then used to deduce, from the simulated data, the most likely X-ray absorption curves for each metal atom in the protein, which agree well with the curves chosen for the simulation. The data analysis relies critically on the ability to measure the incident spectrum for each pulse, and also on the nanoBragg simulator to predict the size, shape and intensity profile of Bragg spots based on an underlying physical model that includes the absorption curves, which are then modified to produce the best agreement with the simulated data. This inference methodology potentially enables the use of SFX diffraction for the study of metalloenzyme mechanisms and, in general, offers a more detailed approach to Bragg spot data reduction.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1993

On the High- and Low- Altitude Limits of the Auroral Electric Field Region

Using measurements from the High Altitude Plasma Instrument (HAPI) on the Dynamics-Explorer 1 (DE-1) spacecraft and the Low Altitude Plasma Instrument (LAPI) on Dynamics Explorer 2 (DE 2), we investigate both die high altitude and low altitude extents of the auroral acceleration region. To infer the high altitude limit, we searched the HAPI data base for evidence of upward-directed auroral electric fields located above the spacecraft when the HAPI spacecraft is above 9000 km altitude. We find that such acceleration is common when DE-1 flies through die auroral oval at an altitude of 9,000-11,000 km. At altitudes above 11,000 km, the fraction of the orbits with evidence of at least a 1000 V potential drop above the spacecraft falls, becoming essentially zero above an altitude of 15,000 km. Above that altitude, small (100 V) potential drops are frequently observed, but only rarely are approx. 1 kV potentials observed, typically associated with polar cap or 'theta' arcs or westward traveling surges. To investigate the low-altitude limit of the auroral acceleration region, we use conjunctions of DE 1 and DE 2 along auroral field lines and match the upgoing fluxes of ionospheric ions observed by DE 2 with the flux of accelerated upgoing ions observed at DE 1. Calculating the ionospheric scale height from the ion and electron temperatures and assuming that the parallel flow velocity is independent of height above 800 km, we calculate the altitude at which the upwelling ionospheric ions are effectively completely lost to upward acceleration. The initial lowest-altitude acceleration process could be either a perpendicular acceleration or a parallel electric field, but it must be sufficient to give the entire distribution escape energy. We find that in the two cases studied, near the region of peak auroral potential drop the altitude of this acceleration was around 1700 km (near the O/H neutral crossover altitude), but was significantly higher (approx. 2000 km) near the edges of the arc, where the potential was lower. The composition of the upgoing ion beam was consistent with these heights, being predominately H(+) near the edges and O(+) near the peak.

Reiff, P. H.↗
DOE OSTI2022

Prediction of DIII-D Pedestal Structure from Externally Controllable Parameters

The sharp increase of pressure at the edge of a high confinement mode (H-mode) plasma, the pedestal, strongly impacts overall plasma performance. Predicting the pedestal is a necessity to control and optimize tokamak operations. An experimental data-driven machine learning (ML) approach is presented that predicts the pedestal heights and widths of electron density (ne) and electron temperature (Te) profiles as well as the separatrix ne from externally controllable parameters such as the plasma shape, heating method and power, and gas puff rate and integrated gas puff. The OMFIT framework was used with DIII-D data to efficiently, robustly, and automatically build a database of pedestal parameters to train machine learning models. Database creation was enabled by the search engine tool for DIII-D data, TokSearch, which parallelizes data fetching, enabling fast searches through basic signals of thousands of DIII-D shots and selection of relevant time intervals. Principal Component Analysis (PCA) separated the database into three clusters that represent classes of plasma shapes that are regularly used in DIII-D. The most important parameters for setting the pedestal structure were plasma current (Ip), toroidal magnetic field (Bφ), neutral beam heating power (PNBI) and shaping quantities. The Deep Jointly Informed Neural Networks (DJINN) algorithm was applied to identify suitable neural network (NN) architectures that appropriately capture the features of the pedestal database. Separate NNs were implemented for each pedestal parameter, and ensembling methods were used to improve the prediction accuracy and allowed estimation of the prediction uncertainty. The pedestal predictions of the test dataset lie within the measurement uncertainties of the pedestal parameters. The NN outperformed simple Linear Regression (LR) analysis, indicating non-linear dependencies in the pedestal structure. The presented achievements illustrate a promising path for future research, using feature extraction to infer experimental trends and thereby improve pedestal models as well as deploying NN for a fast pedestal prediction in DIII-D scenario development.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Evidence for AGN-regulated Cooling in Clusters at z ∼ 1.4: A Multiwavelength View of SPT-CL J0607-4448

Abstract We present a multiwavelength analysis of the galaxy cluster SPT-CL J0607-4448 (SPT0607), which is one of the most distant clusters discovered by the South Pole Telescope at z = 1.4010 ± 0.0028. The high-redshift cluster shows clear signs of being relaxed with well-regulated feedback from the active galactic nucleus (AGN) in the brightest cluster galaxy (BCG). Using Chandra X-ray data, we construct thermodynamic profiles and determine the properties of the intracluster medium. The cool-core nature of the cluster is supported by a centrally peaked density profile and low central entropy ( K 0 = 18 − 9 + 11 keV cm 2 ), which we estimate assuming an isothermal temperature profile due to the limited spectral information given the distance to the cluster. Using the density profile and gas cooling time inferred from the X-ray data, we find a mass-cooling rate M ̇ cool = 100 − 60 + 90 M ⊙ yr −1 . From optical spectroscopy and photometry around the [O ii ] emission line, we estimate that the BCG star formation rate is SFR [ O II ] = 1.7 − 0.6 + 1.0 M ⊙ yr −1 , roughly two orders of magnitude lower than the predicted mass-cooling rate. In addition, using ATCA radio data at 2.1 GHz, we measure a radio jet power P cav = 3.2 − 1.3 + 2.1 × 10 44 erg s −1 , which is consistent with the X-ray cooling luminosity ( L cool = 1.9 − 0.5 + 0.2 × 10 44 erg s −1 within r cool = 43 kpc). These findings suggest that SPT0607 is a relaxed, cool-core cluster with AGN-regulated cooling at an epoch shortly after cluster formation, implying that the balance between cooling and feedback can be reached quickly. We discuss the implications for these findings on the evolution of AGN feedback in galaxy clusters.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Prediction of DIII-D Pedestal Structure From Externally Controllable Parameters

The sharp increase of pressure at the edge of a high confinement mode (H-mode) plasma, the pedestal, strongly impacts overall plasma performance. Predicting the pedestal is a necessity to control and optimize tokamak operations. Here, an experimental data-driven machine learning (ML) approach is presented that predicts the pedestal heights and widths of electron density (n e ) and electron temperature (T e ) profiles as well as the separatrix ne from externally controllable parameters such as the plasma shape, heating method and power, and gas puff rate and integrated gas puff. The OMFIT framework was used with DIII-D data to efficiently, robustly, and automatically build a database of pedestal parameters to train machine learning models. Database creation was enabled by the search engine tool for DIII-D data, TokSearch, which parallelizes data fetching, enabling fast searches through basic signals of thousands of DIII-D shots and selection of relevant time intervals. Principal Component Analysis (PCA) separated the database into three clusters that represent classes of plasma shapes that are regularly used in DIII-D. The most important parameters for setting the pedestal structure were plasma current (I p ), toroidal magnetic field (B Φ ), neutral beam heating power (P NBI ) and shaping quantities. The Deep Jointly Informed Neural Networks (DJINN) algorithm was applied to identify suitable neural network (NN) architectures that appropriately capture the features of the pedestal database. Separate NNs were implemented for each pedestal parameter, and ensembling methods were used to improve the prediction accuracy and allowed estimation of the prediction uncertainty. The pedestal predictions of the test dataset lie within the measurement uncertainties of the pedestal parameters. The NN outperformed simple Linear Regression (LR) analysis, indicating non-linear dependencies in the pedestal structure. The presented achievements illustrate a promising path for future research, using feature extraction to infer experimental trends and thereby improve pedestal models as well as deploying NN for a fast pedestal prediction in DIII-D scenario development.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2020

Atacama Compact Array Measurements of the Molecular Mass in the NGC 5044 Cooling-Flow Group

The fate of cooling gas in the centers of galaxy clusters and groups is still not well understood, as is also the case for the complex processes of triggering star formation in central dominant galaxies, reheating of cooled gas by active galactic nuclei (AGN), and the triggering or “feeding” of supermassive black hole outbursts. We present CO observations of the early-type galaxy NGC 5044, which resides at the center of an X-ray bright group with a moderate cooling flow. For our analysis we combine CO(2−1) data from the 7 m antennae of the Atacama Compact Array (ACA) and the ACA total power array (TP). We demonstrate, using the 7 m array data, that we can recover the total flux inferred from IRAM 30 m single-dish observations, which corresponds to a total molecular mass of about 4 × 10(exp 7) M⨀ Most of the recovered flux is blueshifted with respect to the galaxy rest frame and is extended on kiloparsec-scales, suggesting low filling factor dispersed clouds. We find eight concentrations of molecular gas out to a radius of 10” (1.5 kpc), which we identify with giant molecular clouds. The total molecular gas mass is more centrally concentrated than the X-ray emitting gas but is extended in the northeast-southwest direction beyond the IRAM 30 m beam. We also compare the spatial extent of the molecular gas to the Hα emission: The CO emission coincides with the very bright Hα region in the center. We do not detect CO emission in the fainter Hα regions. Furthermore, we find two CO absorption features spatially located at the center of the galaxy, within 5 pc projected distance of the AGN, infalling at 255 and 265 km s(exp −1) relative to the AGN. This indicates that the two giant molecular clouds seen in absorption are most likely within the sphere of influence of the supermassive black hole.

Galaxy clusters↗