A digital logic system for the evaluation of instrumental contributions to chromatographic band broadening
Digital logic control of chromatographic system for measuring instrumental contributions to band broadening
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Digital logic control of chromatographic system for measuring instrumental contributions to band broadening
Digital image sensors in hemispherical geometries offer unique imaging advantages over their planar counterparts, such as wide field of view and low aberrations. Deforming miniature semiconductor-based sensors with high-spatial resolution into such format is challenging. Here we introduce a simple origami approach for fabricating single-crystalline silicon-based focal plane arrays and artificial compound eyes that have hemisphere-like structures. Convex isogonal polyhedral concepts allow certain combinations of polygons to fold into spherical formats. Using each polygon block as a sensor pixel, the silicon-based devices are shaped into maps of truncated icosahedron and fabricated on flexible sheets and further folded either into a concave or convex hemisphere. These two electronic eye prototypes represent simple and low-cost methods as well as flexible optimization parameters in terms of pixel density and design. Results demonstrated in this work combined with miniature size and simplicity of the design establish practical technology for integration with conventional electronic devices.
Digital generation of acceleration voltage for mass spectrometer, and development of low power, nondestructive readout, plated-wire memory
Digital computer, Control Computer Subsystem (CCS), possess high degree of fault tolerance. CCS embodies concepts of self-test and repair. It is capable of monitoring its own performance and of identifying and replacing with standby spare any of its units that fail.
Digital simulation models of remotely manned vehicles are discussed and recommendations for statistical validation of all the models are considered.
A novel method is proposed for protecting digital filters from temporary and permanent failures that are not easily detected by conventional fault-tolerant computer design principles, on the basis of the error-detecting properties of real convolutional codes. Erroneous behavior is detected by externally comparing the calculated and regenerated parity samples. Great simplifications are obtainable by modifying the code structure to yield simplified parity channels with finite impulse response structures. A matrix equation involving the original parity values of the code and the polynomial of the digital filter's transfer function is formed, and row manipulations separate this equation into a set of homogeneous equations constraining the modifying scaling coefficients and another set which defines the code parity values' implementation.
A collection of technical papers are presented that cover modeling pilot interaction with automated digital avionics systems and guidance and control algorithms for contour and nap-of-the-earth flight. The titles of the papers presented are as follows: (1) Automation effects in a multiloop manual control system; (2) A qualitative model of human interaction with complex dynamic systems; (3) Generalized predictive control of dynamic systems; (4) An application of generalized predictive control to rotorcraft terrain-following flight; (5) Self-tuning generalized predictive control applied to terrain-following flight; and (6) Precise flight path control using a predictive algorithm.
Critical infrastructure protection is vital to the day-to-day operation of any country, and those systems need to be protected to the fullest extent possible. As with what was seen in Ukraine in late 2016, with the cyber attack on the power grid, these systems are susceptible to attacks that can cause serious damage, both physically and economically. This incident shut down the power grid for 6 hours, with nearly 80,000 people affected. Cyber security can be referred to as the protection of data and systems in networks, both wired and wireless, from unauthorized access or attack. In nuclear power plants, assessments of cyber security are critical to ensuring the safe and reliable operation of the systems used. According to the Nuclear Regulatory Commission (NRC), the purpose of cyber security assessments is to detect and then eliminate or mitigate vulnerabilities in the digital system that could be exploited either from outside or inside the digital system protected area. These cyber security assessments are essentially intended to reduce cyber security risk. The NRC refers to cyber security risk as the combination of the consequence to the nuclear power plant and the susceptibility of a digital system to internal and external cyber attack.
Purpose: The conditions under which vendor performance criteria for digital radiography systems are obtained do not adequately simulate the conditions of actual clinical imaging with respect to radiographic technique factors, scatter production, and scatter control. Therefore, the relationship between performance under ideal conditions and performance in clinical practice remains unclear. Using data from a large complement of systems in clinical use, the authors sought to develop a method to establish expected performance criteria for digital flat-panel radiography systems with respect to signal-to-noise ratio (SNR) versus detector exposure under clinical conditions for thoracic imaging. Methods: The authors made radiographic exposures of a patient-equivalent chest phantom at 125 kVp and 180 cm source-to-image distance. The mAs value was modified to produce exposures above and below the mAs delivered by automatic exposure control. Exposures measured free-in-air were corrected to the imaging plane by the inverse square law, by the attenuation factor of the phantom, and by the Bucky factor of the grid for the phantom, geometry, and kilovolt peak. SNR was evaluated as the ratio of the mean to the standard deviation (SD) of a region of interest automatically selected in the center of each unprocessed image. Data were acquired from 18 systems, 14 of which were tested both before and after gain and offset calibration. SNR as a function of detector exposure was interpolated using a double logarithmic function to stratify the data into groups of 0.2, 0.5, 1.0, 2.0, and 5.0 mR exposure (1.8, 4.5, 9.0, 18, and 45 {mu}Gy air KERMA) to the detector. Results: The mean SNR at each exposure interval after calibration exhibited linear dependence on the mean SNR before calibration (r{sup 2} = 0.9999). The dependence was greater than unity (m = 1.101 {+-} 0.006), and the difference from unity was statistically significant (p < 0.005). The SD of mean SNR after calibration also exhibited linear dependence on the SD of the mean SNR before calibration (r{sup 2} = 0.9997). This dependence was less than unity (m = 0.822 {+-} 0.008), and the difference from unity was also statistically significant (p < 0.005). Systems were separated into two groups: systems with a precalibration SNR higher than the median SNR (N = 7), and those with a precalibration SNR lower than the median SNR (N = 7). Posthoc analysis was performed to correct for expanded false positive results. After calibration, the authors noted differences in mean SNR within both high and low groups, but these differences were not statistically significant at the 0.05 level. SNR data from four additional systems and one system from those previously tested after replacement of its detector were compared to the 95% confidence intervals (CI) calculated from the postcalibration SNR data. The comparison indicated that four of these five systems were consistent with the CI derived from the previously tested 14 systems after calibration. Two systems from the paired group that remained outside the CI were studied further. One system was remedied with a grid replacement. The nonconformant behavior of the other system was corrected by replacing the image receptor. Conclusions: Exposure-dependent SNR measurements under conditions simulating thoracic imaging allowed us to develop criteria for digital flat-panel imaging systems from a single manufacturer. These measurements were useful in identifying systems with discrepant performance, including one with a defective grid, one with a defective detector, and one that had not been calibrated for gain and offset. The authors also found that the gain and offset calibration reduces variation in exposure-dependent SNR performance among the systems.
Presentation slides for distribution to interested party as part of ongoing collaboration with industry. Slides present existing LWRS efforts in the qualitative and quantitative risk assessment of digital software systems. Specifically, a discussion on the RESHA and ORCAS methodologies is presented.
Many digitally controlled aerospace systems have widely separated time constants and thus can benefit from the use of two or more sample rates. In this paper, the analysis and synthesis of multirate systems is accomplished by creating an equivalent single rate system and applying existing techniques. The optimal steady state solution of the single rate system is obtained by eigenvector decomposition and then used to compute the periodic solution to the Riccati equation of the original multirate system. An example shows when multirate analysis is necessary and the penalty of various levels of approximations to the exact multirate solution.
This report covers a visibility study of utilizing present KSC broadband communications data system (BCDS) for digital video services. Digital video services include compressed digital TV delivery and video-on-demand. Furthermore, the study examines the possibility of providing interactive video on demand to desktop personal computers via KSC computer network.
This report covers a visibility study of utilizing present KSC broadband communications data system (BCDS) for digital video services. Digital video services include compressed digital TV delivery and video-on-demand. Furthermore, the study examines the possibility of providing interactive video on demand to desktop personal computers via KSC computer network.
Engineers and scientists in the advanced fighter technology integration (AFTI) F-16 program investigated the integration of emerging technologies into an advanced fighter aircraft. AFTI's three major technologies included: flight-crucial digital control, decoupled aircraft flight control, and integration of avionics, flight control, and pilot displays. In addition to investigating improvements in fighter performance, researchers studied the generic problems confronting the designers of highly integrated flight-crucial digital control. An overview is provided of both the advantages and problems of integration digital control systems. Also, an examination of the specification, design, qualification, and flight test life-cycle phase is provided. An overview is given of the fault-tolerant design, multimoded decoupled flight control laws, and integrated avionics design. The approach to qualifying the software and system designs is discussed, and the effects of design choices on system qualification are highlighted.
An account is given of the control systems engineering methods applicable to the design of digital feedback controllers for aerospace deterministic systems in which the output, rather than being an instantaneous measure of the system at the sampling instants, instead represents an average measure of the system over the time interval between samples. The averaging effect can be included during the modeling of the plant, thereby obviating the iteration of design/simulation phases.
To demonstrate how the ESDIS (Earth Science Data and Information System) DOI (Digital Object Identifier) system and its processes have evolved over these years based on the recommendations provided by the user community (whether the community members create and manage DOI information or use DOIs in the data citations). The user community is comprised of people with common interests and needs for data identifiers who are actively involved in the creation and usage process. Engagement describes the interactive context wherein the community provides information, evaluates the proposed processes, and provides guidance in the area of identifiers.
Real time airborne data acquisition, archiving and distribution on the NASA/Ames Research Center (ARC) C-130 has been improved over the past three years due to the implementation of the C-130 Automated Digital Data System (CADDS). CADDS is a real time, multitasking, multiprocessing ROM-based system. CADDS acquires data from both avionics and environmental sensors inflight for all C-130 data lines. The system also displays the data on video monitors throughout the aircraft.
Nuclear power plants and facilities have been implementing digital system upgrades into their previously analog systems for well over twenty years. New nuclear facilities' control, security, and emergency preparedness systems are almost exclusively built on digital architectures with a high degree of communication between the various systems that are often integrated together into a central control station to aid in operation or security of the facility. As digital systems become more widespread in nuclear facility control system architectures, cyber security related issues have become a significant concern to operators, regulators, governments, and other groups. Among the many concerns related to digital systems and cyber security is the area of common cause and common mode failures. This paper introduces, defines, and discusses some sources of common cause failure from a cyber security perspective: common vector access. This refers to specific access points that an adversary can exploit through a single attack sequence that have the potential to provide relational failures through common cause on multiple components, subsystems, systems, or plants. This paper will further discuss interconnected processes where these access points may exist, the importance of limiting or controlling these pinch points, and some methods of protecting common vector access points. (authors)