Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diffractive networks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Spatial Interactions in Hydrogenated Perovskite Nickelate Synaptic Networks

A key aspect of how the brain learns and enables decision-making processes is through synaptic interactions. Electrical transmission and communication in a network of synapses are modulated by extracellular fields generated by ionic chemical gradients. Emulating such spatial interactions in synthetic networks can be of potential use for neuromorphic learning and the hardware implementation of artificial intelligence. Here, in this work, we demonstrate that in a network of hydrogen-doped perovskite nickelate devices, electric bias across a single junction can tune the coupling strength between the neighboring cells. Electrical transport measurements and spatially resolved diffraction and nanoprobe X-ray and scanning microwave impedance spectroscopic studies suggest that graded proton distribution in the inhomogeneous medium of hydrogen-doped nickelate film enables this behavior. We further demonstrate signal integration through the coupling of various junctions.

36 MATERIALS SCIENCE↗

Deep learning of interface structures from simulated 4D STEM data: cation intermixing vs. roughening ∗

Abstract Interface structures in complex oxides remain an active area of condensed matter physics research, largely enabled by recent advances in scanning transmission electron microscopy (STEM). Yet the nature of the STEM contrast in which the structure is projected along the given direction precludes separation of possible structural models. Here, we utilize deep convolutional neural networks (DCNN) trained on simulated 4D STEM datasets to predict structural descriptors of interfaces. We focus on the widely studied interface between LaAlO 3 and SrTiO 3 , using dynamical diffraction theory and leveraging high performance computing to simulate thousands of possible 4D STEM datasets to train the DCNN to learn properties of the underlying structures on which the simulations are based. We test the DCNN on simulated data and show that it is possible (with >95% accuracy) to identify a physically rough from a chemically diffuse interface and create a DCNN regression model to predict step positions. We quantify the applicability of the model to different thicknesses and the transferability of the approach. The method shown here is general and can be applied for any inverse imaging problem where forward models are present.

42 ENGINEERING↗

Real-time sparse-sampled Ptychographic imaging through deep neural networks

Ptychography has rapidly grown in the fields of X-ray and electron imaging for its unprecedented ability to achieve nano or atomic scale resolution while simultaneously retrieving chemical or magnetic information from a sample. A ptychographic reconstruction is achieved by means of solving a complex inverse problem that imposes constraints both on the acquisition and on the analysis of the data, which typically precludes real-time imaging due to computational cost involved in solving this inverse problem. In this work we propose PtychoNN, a novel approach to solve the ptychography reconstruction problem based on deep convolutional neural networks. We demonstrate how the proposed method can be used to predict real-space structure and phase at each scan point solely from the corresponding far-field diffraction data. The presented results demonstrate how PtychoNN can effectively be used on experimental data, being able to generate high quality reconstructions of a sample up to hundreds of times faster than state-of-the-art ptychography reconstruction solutions once trained. By surpassing the typical constraints of iterative model-based methods, we can significantly relax the data acquisition sampling conditions and produce equally satisfactory reconstructions. Besides drastically accelerating acquisition and analysis, this capability can enable new imaging scenarios that were not possible before, in cases of dose sensitive, dynamic and extremely voluminous samples.

Cherukara, Mathew J↗

Low-Dimensional Network Formation in Molten Sodium Carbonate

Molten carbonates are highly inviscid liquids characterized by low melting points and high solubility of rare earth elements and volatile molecules. An understanding of the structure and related properties of these intriguing liquids has been limited to date. We report the results of a study of molten sodium carbonate (Na2CO3) which combines high energy X-ray diffraction, containerless techniques and computer simulation to provide insight into the liquid structure. Total structure factors (F-x(Q)) are collected on the laser-heated carbonate spheres suspended in flowing gases of varying composition in an aerodynamic levitation furnace. The respective partial structure factor contributions to Fx(Q) are obtained by performing molecular dynamics simulations treating the carbonate anions as flexible entities. The carbonate liquid structure is found to be heavily temperature-dependent. At low temperatures a low-dimensional carbonate chain network forms, at T = 1100 K for example similar to 55% of the C atoms form part of a chain. The mean chain lengths decrease as temperature is increased and as the chains become shorter the rotation of the carbonate anions becomes more rapid enhancing the diffusion of Na+ ions.

Wilding, Martin C.↗

(NH 4 ) 2 [UO 2 Cl 4 ]·2H 2 O, a new uranyl tetrachloride with ammonium charge-balancing cations

A new uranyl tetrachloride salt with chemical formula, (NH 4 ) 2 [UO 2 Cl 4 ]·2H 2 O, namely, diammonium uranyl tetrachloride dihydrate, 1 , was prepared and crystallized via slow evaporation from a solution of 2 M hydrochloric acid. As confirmed by powder X-ray diffraction, the title compound crystallizes with an ammonium chloride impurity that formed as a result of the breakdown of a triazine precursor. The (UO 2 Cl 4 ) 2− dianion is charge balanced by ammonium cations, while an extensive hydrogen-bond network donated from structural water molecules stabilize the overall assembly. Compound 1 adds to the extensive collection of actinyl tetrachloride salts, but it represents the first without an alkali cation for purely inorganic compounds. Diffuse reflectance and luminescence spectra show typical absorption and emission behavior, respectively, of uranyl materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Syntheses, structures and luminescent properties of lanthanide coordination polymers assembled from imidazophenanthroline derivative and oxalate ligands

Nine new lanthanide coordination polymers, namely, [Ln(Hsfpip)(ox){sub 0.5}(H{sub 2}O)]{sub n}·2n(H{sub 2}O) ((Ln=Eu (1), Tb (2), Dy (3), Ho (4), Er (5), Yb (6), Y(7)), [Ln(H{sub 2}sfpip)(ox)(H{sub 2}O){sub 4}]{sub n}·2n(H{sub 2}O) (Ln=Nd (8) Sm (9)), [H{sub 2}ox=oxalic acid, H{sub 3}sfpip=2-(2,4-disulfophenyl)imidazo(4,5-f)(1,10)-phenanthroline] have been synthesized under hydrothermal conditions and characterized by IR spectra, elemental analysis, powder X-ray diffraction and single crystal X-ray diffraction. When sodium oxalate is added, the reactions of lanthanide ions with H{sub 3}sfpip resulted in two types of structures. Compounds 1–7 are obtained at pH 5.0 and exhibit 3D tfz-d networks with ox{sup 2−} anions as linkers to bridge the adjacent layers. Compounds 8–9 are obtained at pH 2.0, and display a 1D chain which is further extended to a 3D supramolecular framework through intermolecular hydrogen bonds and π-π interactions. The structural variation from compounds 1–7 to 8–9 can attribute to the pH effect on construction of lanthanide coordination polymers. Moreover, the thermal stabilities and luminescence properties of 1–9 were also investigated. - Graphical abstract: Nine new lanthanide coordination polymers have been synthesized under hydrothermal conditions. Compounds 1–7 exhibit a 3D tfz-d network. Compounds 8–9 display a 1D chain structure. The structural variation from compounds 1–7 to 8–9 can attribute to the pH effect on construction of lanthanide coordination polymers. - Highlights: • Nine lanthanide coordination polymers were prepared under hydrothermal conditions. • Their crystal structures have been determined. • The luminescence and thermal stabilities were studied in the solid state.

36 MATERIALS SCIENCE↗

Two new pyridine-2,3-dicarboxylate coordination polymers prepared from zerovalent metal precursor: Syntheses, luminescent and magnetic properties

Two new K{sup +}/Cu(II) and Zn(II) coordination polymers with pyridine-2,3-dicarboxylate (pydc), (K{sub 2}[Cu(μ-pydc){sub 2}]·3H{sub 2}O){sub n} (1) and ([Zn(µ-pydc)(H{sub 2}O)(4-mim)]·H{sub 2}O){sub n} (2) (4-mim=4-methylimidazole) have been synthesized from zerovalent metal and characterized by IR, EPR spectroscopy, thermal analysis and single crystal X-ray diffraction techniques. In the sandwiched 3D anionic framework of 1, pydc ligands exhibit hexadentate coordination; tridentate coordination bond with Cu(II) and tridentate ionic interaction with K{sup +} ions. (K{sub 2}[Cu(μ-pydc){sub 2}]·3H{sub 2}O){sub n} shows a rare topology consists of three dimensional (3,4,5)-connected network with the point symbol of (4{sup 2}.6){sub 2}(4{sup 2}.8{sup 4})(4{sup 3}.6.8{sup 6}){sub 2}. The distorted square pyramidal geometry of 2 is completed with an nitrogen atom from 4-mim and aqua ligand to form a 1D polynuclear structure. The hydrogen bonds link the 1D chains into 3D architecture. The temperature dependent magnetic property of complex 1 has been studied. Complex 2 exhibits unusual yellow luminescence in the solid state at room temperature. - Graphical abstract: Two new K{sup +}/Cu(II) and Zn(II) coordination polymers with pyridine-2,3-dicarboxylate (pydc), (K{sub 2}[Cu(μ-pydc){sub 2}]·3H{sub 2}O){sub n} (1) and ([Zn(µ-pydc)(H{sub 2}O)(4-mim)]·H{sub 2}O){sub n} (2) (4-mim=4-methylimidazole) have been synthesized from zerovalent metal and characterized by IR, EPR spectroscopy, thermal analysis and single crystal X-ray diffraction techniques. The water soluble (K{sub 2}[Cu(μ-pydc){sub 2}]·3H{sub 2}O){sub n} shows three dimensional a rare 3,4,5-connected network with the point symbol of (4{sup 2}.6){sub 2}(4{sup 2}.8{sup 4})(4{sup 3}.6.8{sup 6}){sub 2}. The temperature dependent magnetic property of complex 1 has been studied. Complex 2 exhibits unusual yellow luminescence in the solid state at room temperature. Display Omitted - Highlights: • Water-soluble (K{sub 2}[Cu(μ-pydc){sub 2}]·3H{sub 2}O){sub n} has synthesized. • Zerovalent metal precursors are utilized. • The temperature dependent magnetic properties have been studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluation of pore structures and cracking in cement paste exposed to elevated temperatures by X-ray computed tomography

When cement-based materials are exposed to the high temperatures induced by fire, which can rapidly cause temperatures of over 1000 °C, the changes in pore structure and density prevail. In the present study, mortar specimens were subjected to a series of increasing temperatures to explore the temperature-dependent evolution of internal pore structure. High-performance X-ray computed tomography (CT) was used to observe the evolution of temperature-induced discontinuities at the sub-millimeter level. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were employed to investigate the cause of physical changes in the heated mortar specimens. Results exhibit the changes in pore structure caused by elevated temperatures, and thermally induced fractures. We discuss the progressive formation of thermally induced fracture networks, which is a prerequisite for spalling failure of cement-based materials by fire, based on visual observations of the 3D internal structures revealed by X-ray CT.

36 MATERIALS SCIENCE↗

Effect of TiN Addition on 3Y-TZP Ceramics with Emphasis on Making EDM-Able Bodies

In this study, to produce electrically conductive ceramics, rapid hot press (RHP) sintering of 3 mol.% yttria-stabilized tetragonal zirconia polycrystal (3Y-TZP) and 3Y-TZP/TiN composites with TiN amounts of 25, 35, and 45 vol.% was performed at 1300, 1350, and 1400 °C. Interestingly, the toughness and hardness were improved in the presence of TiN up to 35 vol.% and maximum fracture toughness and hardness of 5.40 ± 0.05 MPa m{sup 1/2} and 14.50 ± 0.06 GPa, respectively, were obtained. However, the bending strength was decreased which could be attributed to the rather weak interfaces of nitride and oxide phases. Regarding the zirconia matrix, the effect of grain size on fracture toughness of the samples has been studied using x-ray diffraction and field emission scanning electron microscope (FESEM) analysis. It was also found that electrical resistivity decreased to the value of 6.88 × 10{sup −6} Ω m at 45 vol.% of TiN. It seems the TiN grains form a network to impose conductivity on the ZrO{sub 2} body; however, below 35 vol.% TiN, due to lack of percolation effect, this conductivity could not be maintained according to FESEM studies. Finally, electrically conductive samples were successfully machined by electrical discharge machining (EDM).

36 MATERIALS SCIENCE↗

Structure of diopside, enstatite, and magnesium aluminosilicate glasses: A joint approach using neutron and x-ray diffraction and solid-state NMR

Neutron diffraction with magnesium isotope substitution, high energy x-ray diffraction, and 29 Si, 27 Al, and 25 Mg solid-state nuclear magnetic resonance (NMR) spectroscopy were used to measure the structure of glassy diopside (CaMgSi 2 O 6 ), enstatite (MgSiO 3 ), and four (MgO) x (Al 2 O 3 ) y (SiO 2 ) 1–x–y glasses, with x = 0.375 or 0.25 along the 50 mol. % silica tie-line (1 – x – y = 0.5) or with x = 0.3 or 0.2 along the 60 mol. % silica tie-line (1 – x – y = 0.6). The bound coherent neutron scattering length of the isotope 25 Mg was remeasured, and the value of 3.720(12) fm was obtained from a Rietveld refinement of the powder diffraction patterns measured for crystalline 25 MgO. The diffraction results for the glasses show a broad asymmetric distribution of Mg–O nearest-neighbors with a coordination number of 4.40(4) and 4.46(4) for the diopside and enstatite glasses, respectively. As magnesia is replaced by alumina along a tie-line with 50 or 60 mol. % silica, the Mg–O coordination number increases with the weighted bond distance as less Mg 2+ ions adopt a network-modifying role and more of these ions adopt a predominantly charge-compensating role. 25 Mg magic angle spinning (MAS) NMR results could not resolve the different coordination environments of Mg 2+ under the employed field strength (14.1 T) and spinning rate (20 kHz). The results emphasize the power of neutron diffraction with isotope substitution to provide unambiguous site-specific information on the coordination environment of magnesium in disordered materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

X-ray photoelectron diffraction study of dopant effects in La{sub 0.7}X{sub 0.3}MnO{sub 3} (X = La, Sr, Ca, Ce) thin films

We present and discuss element-specific x-ray photoelectron diffraction (XPD) patterns of La, Mn, O and the dopant ions Ca, Sr and Ce of various La{sub 0.7}X{sub 0.3}MnO (LXMO) films grown epitaxially on SrTiO{sub 3}(001) substrates. The recorded XPD polar scans are explained in the framework of multiple-scattering cluster calculations, where in general a very good agreement between experimental and theoretical data has been found. Results for all thin films are compatible with a tetragonally distorted cubic perovskite structure with similar MnO{sub 6} network. Strong evidence for Mn-site termination was found in all thin films. Dopant locations on A-type sites were clearly confirmed for Sr in LSMO and Ca in LCMO films by means of XPD polar scans. The absence of surface-sensitive Ce3d diffraction features for Ce in LCeMO points to non-equivalent Ce sites and related near-surface disorder.

36 MATERIALS SCIENCE↗

Direct Observation of Xe and Kr Adsorption in a Xe-Selective Microporous Metal–Organic Framework

The cryogenic separation of noble gases is energy-intensive and expensive, especially when low concentrations are involved. Metal organic frameworks containing polarizing groups within their pore spaces are predicted to be efficient Xe/Kr solid state adsorbents but no experimental insights on the nature of the Xe-network interaction is available to date. Here we report a new microporous metal organic framework (designated SBU2) that is selective toward Xe over Kr at ambient conditions, with Xe/Kr selectivity of about 10 and Xe capacity of 37.1 wt% at 298 K. Results of single crystal diffraction show Xe selectivity may be attributed to the specific geometry of the pores, forming cages built with phenyl rings and enriched with polar -OH groups, both serving as strong adsorption sites for polarizable Xe gas. The Xe/Kr separation in SBU2 was investigated with experimental and computational breakthrough methods. These experiments showed that Xe broke through the column after 3 min, followed by Kr at 4.5 min after injection of gases mixture, which confirmed that SBU2 has a real practical potential for separating Xe from Kr. Computational calculations show that SBU2 capacity and adsorption selectivity is comparable to the best-performing unmodified MOFs such as Ni-MOF-74 or Co Formate.

Xenon, Krypton↗

Pressure-Induced Polymerization of LiN(CN) 2

The high-pressure behavior of lithium dicyanamide (LiN(CN) 2 ) was studied with in situ Raman and infrared (IR) spectroscopies, and synchrotron angle-dispersive powder X-ray diffraction (PXRD) in a diamond anvil cell (DAC) to 22 GPa. The fundamental vibrational modes associated with molecular units were assigned using a combination of experimental data and density functional perturbation theory. Some low-frequency modes were observed for the first time. On the basis of spectroscopic and diffraction data, we suggest a polymorphic phase transformation at ~8 GPa, wherein dicyanamide ions remain as discrete molecular species. Above ca. 18 GPa, dicyanamide units polymerize, forming a largely disordered network, and the extent of polymerization may be increased by annealing at elevated temperature. The polymerized product consists of tricyanomelaminate-like groups containing sp 2 -hybidized carbon–nitrogen bonds and exhibits a visible absorption edge near 540 nm. Lastly, the product is recoverable to ambient conditions but is not stable in air/moisture.

36 MATERIALS SCIENCE↗

Photofunctional hybrid silica microspheres covalently functionalized with metalloporphyrins

The entrapment of metalloporphyrins (with Zn{sup 2+} and Yb{sup 3+}) in silica microspheres is achieved by modification of protoporphyrin IX (Pp-IX) molecules with three different organosilane precursors via the sol-gel method. The obtained hybrid materials are characterized by electronic absorption spectra, Fourier-transform infrared (FT-IR), X-ray diffraction (XRD), {sup 29}Si MAS NMR spectrum, scanning electron microscopy (SEM), nitrogen adsorption/desorption isotherms and thermogravimetric analysis (TGA), and their luminescence properties have also been determined. The results reveal that the obtained porphyrins networks are covalently bonded to the inorganic matrix through the bridging action of the functionalized silica microspheres. Furthermore, it has also been observed that porphyrins molecules located in different environments exhibit different photophysical properties in the visible and near-infrared regions. - Graphical abstract: The entrapment of metalloporphyrins (with Zn{sup 2+} and Yb{sup 3+}) in silica microspheres is achieved by modification of protoporphyrin IX (Pp-IX) molecules with three different organosilane precursors via the sol-gel method. Highlights: Black-Right-Pointing-Pointer Novel functionalized silica microsphere is assembled. Black-Right-Pointing-Pointer Metal phorphyrin derivatives are used as a chemical linkage. Black-Right-Pointing-Pointer Luminescence is obtained in the visible and near infrared regions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sticking-Free Reduction of Titanomagnetite Ironsand in a Fluidized Bed Reactor

Fluidized bed reduction of iron ore fines is typically inhibited by the onset of “sticking” at temperatures above 973 K, which leads to particle agglomeration and defluidization of the bed. Here, we report the sticking-free fluidized bed reduction of titanomagnetite (TTM) ironsand at 1223 K in Ar-H{sub 2} gas mixtures. We show that sticking is prevented by the formation of a protective titanium-rich oxide shell around each particle during the initial reduction stage. This protective shell prevents iron-iron contact between particles throughout the reduction process, enabling metallization degrees of 93 pct to be attained without sticking occurring. Phase evolution during the reaction has also been analyzed using q-X-ray diffraction and scanning electron microscope/energy dispersed spectroscopy. We find that the reduction proceeds through four separate stages. During the initial stage, approximately half of the initial TTM phase is converted to wüstite, forming a network of sub-micron wüstite channels which interlace the TTM matrix. During this stage, Ti and Al are enriched within the TTM matrix, due to the low solubility of both species in wüstite. This enrichment stabilizes the remaining TTM, meaning that wüstite is then preferentially reduced to metallic iron in stage 2 of the reduction. In stage 3, the remaining Ti-enriched TTM is reduced directly to metallic iron and ilmenite. The final stage of reduction involves the conversion of ilmenite into rutile and pseudobrookite. Our findings clarify the important role played by titanium species during the reduction of TTM and suggest that New Zealand ironsand can offer significant advantages over conventional hematite ores when used as a feedstock for fluidized bed direct-reduced iron processes.

36 MATERIALS SCIENCE↗

Synthesis and crystal structure of 3-ammoniumphenyl sulfone selenate, 3-aminophenyl sulfone [C{sub 12}H{sub 14}N{sub 2}O{sub 2}S]SeO{sub 4} {center_dot} [C{sub 12}H{sub 12}N{sub 2}O{sub 2}S]

The crystal structure of [C{sub 12}H{sub 14}N{sub 2}O{sub 2}S]SeO{sub 4} {center_dot} [C{sub 12}H{sub 12}N{sub 2}O{sub 2}S] was determined by X-ray diffraction on single crystal. Crystals are orthorhombic, space group Pbca, with cell parameters a = 11.545 (1), b = 8.143 (1), c = 55.783(1)A, V = 5244.2 (8)A{sup 3} and Z = 8. The structure can be described as organic layers built by [C{sub 12}H{sub 14}N{sub 2}O{sub 2}S]{sup 2+} cations and [C{sub 12}H{sub 12}N{sub 2}O{sub 2}S] molecules, parallel to ab plane, between which the inorganic groups SeO{sub 4}{sup 2-} are inserted. In this atomic arrangement, H-bonds between the different species play an important role in the three-dimensional network cohesion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A new strontium antimonate{sup III} Sr{sub 5}Sb{sub 22}O{sub 38}: Synthesis, crystal structure and characterizations

A new strontium antimonate{sup III}, Sr{sub 5}Sb{sub 22}O{sub 38}, has been hydrothermally synthesized and structurally characterized by single crystal X-ray diffraction. It crystallizes in the P2{sub 1}/n space group of the monoclinic system with a=11.739(9) Å, b=12.014(10) Å, c=16.412(13) Å, β=91.460(8)°, V=2314.0(3) Å{sup 3}. The crystal structure is built of seven trigonal–pyramidal SbO{sub 3} and four sphenoid SbO{sub 4} polyhedra which are connected through sharing corner-oxygen atoms to form the complex three-dimensional {sub ∞}{sup 3}[Sb{sub 22}O{sub 38}]{sup 10−} anionic network with two different intersectant tunnels along the [111-bar ] and [11-bar 1-bar ] directions accommodating the electric charge balanced Sr{sup 2+} cations. First-principles electronic structure calculations based on the density functional theory (DFT) and the UV–vis diffuse reflectance spectroscopy measurements both indicate that the compound belongs to a direct band insulator with an optical gap value of 3.3 eV. - Graphical abstract: The 2D Sb–O slabs are stacked through sharing oxygen atoms to form the 3D network structure of the new strontium antimonate{sup III} Sr{sub 5}Sb{sub 22}O{sub 38}. - Highlights: • A new strontium antimonate{sup III}, Sr{sub 5}Sb{sub 22}O{sub 38}, has been hydrothermally synthesized. • The single crystal structure was determined by X-ray diffraction. • The powder XRD and UV–vis absorption spectroscopy were studied. • Theoretical studies interpret the relationships between optical absorption and crystal structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A three-dimensional coordination polymer based on 1,2,3-triazole-4,5-dicarboxylic acid (H{sub 3}tda): ([Cd{sub 12}(tda){sub 8}(H{sub 2}O){sub 11}] · (H{sub 2}O)6.25){sub n}

The title coordination polymer ([Cd{sub 12}(tda){sub 8}(H{sub 2}O){sub 11}] · (H{sub 2}O){sub 6.25}){sub n} (H{sub 3}tda = 1,2,3-triazole-4,5-dicarboxylic acid), has been hydrothermally synthesized and structurally characterized by single-crystal X-ray diffraction. Complex crystallizes in orthorhombic sp. gr. Pmn2{sub 1} with Z = 4. The Cd{sub 2} unit doublebridged by one carboxylate oxygen atom and two neighboring nitrogen atoms from the tda{sup 3–} ligands are linked by the tda{sup 3–}ligands to lead to the 2D (4,4) network in the ac plane. The almost coplanar Cd{sub 2}(μ{sub 5}-tda){sub 2} unit comprised of two Cd ions double-bridged by two tda{sup 3–} ligands through the neighboring nitrogen atoms is connected with the other four Cd{sub 2}(μ{sub 5}-tda){sub 2} units form the undulating 2D network in the ac plane. The (4,4) networks and undulating 2D networks are alternatively connected along the b axis by the tda{sup 3–} ligands coordinating to the Cd ions to form the 3D framework.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗