Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “determinants”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Determination of U, V, and W from single station Doppler radar radial velocities

The ST/MST (stratosphere troposphere/mesosphere stratosphere troposphere) clear air Doppler radar, or wind profiler, is an important tool in observational meteorology because of its capability to remote observe dynamic parameters of the atmosphere. There are difficulties in transforming the observed radial velocities into meteorological wind components. How this problem has been treated in the past is reviewed, and some of the analysis is recast to a form more suited to the high diagnostic abilities of a number of fixed beam configurations with reference to a linear wind field. The results, in conjunction with other works which treats problems such as the effects of finite sample volumes in the presence of nonhomogeneous atmospheric reflectivity, have implications important to the design of both individual MST/ST radars and MST/ST radar networks. The key parameters to uncoupling terms in the scaling equations are w sub x and w sub y. Whenever the stratiform condition, which states that these two parameters are negligible, is satisfied, a five beam ST radar may determine unbiased values of u, v, and w for sample volumes directly above the radar. The divergence and partial deformation of the flow may also be determined. Three beam systems can determine w and w sub z, but are unable to obtain u and v wind components uncontaminated by vertical sheer terms, even when the stratiform condition is satisfied.

Clark, W. L.↗
NASA NTRS1987

The calibration of photographic and spectroscopic films. The utilization of the digital image processor in the determination of aging of the surf clam (Spisula solidissima)

The age of the surf clam (Spisula solidissima) can be determined with the use of the Digital Image Processor. This technique is used in conjunction with a modified method for aging, refined by John Ropes of the Woods Hole Laboratory, Massachusetts. This method utilizes a thinned sectioned chondrophore of the surf clam which contains annual rings. The rings of the chondrophore are then counted to determine age. By digitizing the chondrophore, the Digital Image Processor is clearly able to separate these annual rings more accurately. This technique produces an easier and more efficient way to count annual rings to determine the age of the surf clam.

Peters, Kevin A.↗
NASA NTRS1987

Galilean satellite tour orbit determination assessment

Results are given which demonstrate the ability of the orbit determination system to satisfy accuracy requirements in support of the Galileo Project's planned tour of Jupiter's satellites. The results are derived through the application of mission operation strategies and assumptions. It is shown that the achievement of the requisite orbit determination accuracies is predicated on the availability of optical navigation data. It is further demonstrated that the unavailability of tour optical navigation data yields not only degraded orbit determination accuracies which fail to meet propellant budget and science instrument pointing requirements, but also produces, for the planned 200 km flyby of Europa, an approximate 0.02 risk of having the spacecraft collide with the satellite.

Moultrie, B.↗
NASA NTRS1986

Precise orbit determination of a geosynchronous satellite with differential very-long-baseline interferometry

The use of differential VLBI (DVLBI) to determine the orbit of a U.S. geosynchronous satellite with a position accuracy of a few meters is examined. DVLBI was employed to track the geosynchronous satellite DSCS-II; two observation channels with 2 MHz bandwidth each in a 2 GHz band were used to receive the telemetry signal of the satellite and quasar radio signals. The random observation, delay, station location, and quasar position errors are discussed. The correlation processing of the quasar and satellite signals is described. The accuracy of the estimated satellite position is evaluated using a covariance analysis. It is determined that the satellite position was estimated with an accuracy of about 4 m at the center of the observation arc. It is noted that the modeling error of the solar radiation pressure factor, ionospheric correction error, and observation error need to be corrected in order to provide more accurate orbit determinations.

Shiomi, Tadashi↗
NASA NTRS1987

A demonstration of high precision GPS orbit determination for geodetic applications

High precision orbit determination of Global Positioning System (GPS) satellites is a key requirement for GPS-based precise geodetic measurements and precise low-earth orbiter tracking, currently under study at JPL. Different strategies for orbit determination have been explored at JPL with data from a 1985 GPS field experiment. The most successful strategy uses multi-day arcs for orbit determination and includes fine tuning of spacecraft solar pressure coefficients and station zenith tropospheric delays using the GPS data. Average rms orbit repeatability values for 5 of the GPS satellites are 1.0, 1.2, and 1.7 m in altitude, cross-track, and down-track componenets when two independent 5-day fits are compared. Orbit predictions up to 24 hours outside the multi-day arcs agree within 4 m of independent solutions obtained with well tracked satellites in the prediction interval. Baseline repeatability improves with multi-day as compared to single-day arc orbit solutions. When tropospheric delay fluctuations are modeled with process noise, significant additional improvement in baseline repeatability is achieved. For a 246-km baseline, with 6-day arc solutions for GPS orbits, baseline repeatability is 2 parts in 100 million (0.4-0.6 cm) for east, north, and length components and 8 parts in 100 million for the vertical component. For 1314 and 1509 km baselines with the same orbits, baseline repeatability is 2 parts in 100 million for the north components (2-3 cm) and 4 parts in 100 million or better for east, length, and vertical components.

Lichten, S. M.↗
NASA NTRS1987

Determination of Earth rotation by the combination of data from different space geodetic systems

Formerly, Earth Rotation Parameters (ERP), i.e., polar motion and UTI-UTC values, have been determined using data from only one observational system at a time, or by the combination of parameters previously obtained in such determinations. The question arises as to whether a simultaneous solution using data from several sources would provide an improved determination of such parameters. To pursue this reasoning, fifteen days of observations have been simulated using realistic networks of Lunar Laser Ranging (LLR), Satellite Laser Ranging (SLR) to Lageos, and Very Long Baseline Interferometry (VLBI) stations. A comparison has been done of the accuracy and precision of the ERP obtained from: (1) the individual system solutions, (2) the weighted means of those values, (3) all of the data by means of the combination of the normal equations obtained in 1, and (4) a grand solution with all the data. These simulations show that solutions done by the normal equation combination and grand solution methods provide the best or nearly the best ERP for all the periods considered, but that weighted mean solutions provide nearly the same accuracy and precision. VLBI solutions also provide similar accuracies.

Archinal, Brent Allen↗
NASA NTRS1988

Method for determining artillery position

A method is disclosed for determining the position of cannon from measurement sites whose distance from each other lies in the same order of magnitude as the distance between the cannons -- that distance being in the kilometer range -- with the help of the travel time evaluation of muzzle blasts received at the measurement sites. There are at least two measurement sites, consisting of a cruciform of four microphones each positioned so that one axis is oriented to an arbitrarily chosen reference direction with the microphones spaced closely together. In this arrangement of diametrically opposed microphones, the respective travel times are determined and placed in a relationship whose arctangent is a radio bearing to the reference direction in which radio bearings are determined with consideration of their position and their opposing distance from the cannon position.

Fischer, Johannes↗
NASA NTRS1988

Experimental Determination of Aerodynamic Damping in a Three-Stage Transonic Axial-Flow Compressor

Rotor blade aerodynamic damping is experimentally determined in a three-stage transonic axial flow compressor having design aerodynamic performance goals of 4.5:1 pressure ratio and 65.5 lbm/sec weight flow. The combined damping associated with each mode is determined by a least squares fit of a single degree of freedom system transfer function to the nonsynchronous portion of the rotor blade strain gauge output power spectra. The combined damping consists of aerodynamic and structural and mechanical damping. The aerodynamic damping varies linearly with the inlet total pressure for a given equivalent speed, equivalent mass flow, and pressure ratio while structural and mechanical damping are assumed to be constant. The combined damping is determined at three inlet total pressure levels to obtain the aerodynamic damping. The third stage rotor blade aerodynamic damping is presented and discussed for 70, 80, 90, and 100 percent design equivalent speed. The compressor overall performance and experimental Campbell diagrams for the third stage rotor blade row are also presented.

Newman, Frederick A.↗
NASA NTRS1988

Determination of the Venus flyby orbits of the Soviet Vega probes using VLBI techniques

In December 1984, the Soviet Union launched two identical Vega spacecraft with the dual objective of exploring Venus and continuing to rendezvous with the comet Halley. The two Vega spacecraft encountered Venus in mid-June 1985 and successfully deployed entry probes and wind-measuring balloons into the Venus atmosphere. An objective of the Venus Balloon experiment was to measure the Venus winds using differential VLBI from the balloon and the flyby bus. NASA's Deep Space 64 meter subnet was part of a world wide network organized to collect data from the Vega probes and balloons. A critical element of this experiment was an accurate determination of the Venus relative flyby orbits of the Vega spacecraft during the 46 hour balloon lifetime. Venus flyby solutions were independently determined by the Soviets using two-way range and Doppler from Soviet stations and by JPL using one-way Doppler and VLBI data collected from the DSN. The Vega flyby solutions determined by the Soviets using a sparse two-way tracking strategy with JPL solutions using the DSN VLBI data to complement the Soviet data and with solutions using only one-way data collected by the DSN were compared.

Ellis, J.↗
NASA NTRS1988

Experiments for the determination of convective diffusion heat/mass transfer to burner rig test targets comparable in size to jet stream diameter

The application of a recently formulated vapor transport theory to predict deposition rates of corrosive salts from alkali-seeded combustion gases of a small-capacity, high-velocity, atmospheric-pressure burner rig was hampered by the relatively large dimensions of the cylindrical deposit collector compared to the diameter of the combustion gas stream. The relative dimensions lead to a highly nonadiabatic combustion gas flow around the collector and necessitate two series of experiments. In the first series, mass transfer coefficients are determined by utilizing the naphthalene sublimation technique. The second series of experiments determines the dilution effect on the sodium species concentrations due to the entrainment of ambient air. This second series involves the measurement of the temperature variation along the surface of the collector under steady state conditions. Vapor deposition rates are determined exploiting this information and the results are found to compare favorably with experimentally obtained rates.

Santoro, G. J.↗
NASA NTRS1988

Attitude determination and control subsystem for the TOPEX satellite

The Ocean Topography Experiment satellite will carry a modular Attitude Determination and Control Subsystem (ADCS) which contains all equipment required for attitude determination, stabilization, and control, as well as hydrazine thruster firing control, during all mission phases. Attention is presently given to the ADCS's architecture, constituent hardware components, performance requirements, and predicted on-orbit performance compliance, with emphasis on the design and analysis of the Normal Mission Mode control algorithm furnishing the primary scientific data-acquisition operational mode. This mode's attitude determination and control of on-orbit performance is predicted to better than 43 arcsec.

Dennehy, C. J.↗
NASA NTRS1988

The effects of geopotential resonance on orbit determination for Landsat-4

Analysis is presented demonstrating improved performance for Landsat-4 orbit determination using the Goddard Trajectory Determination System with an adjusted Goddard Earth Model-9 (GEM-9) for geopotential coefficients of the 15th degree and order. The orbital state is estimated along with the sine and cosine coefficients of degree and order 15, (C, S) sub 15,15. The estimates are made for two 5-day intervals of range and doppler data, primarily from the Tracking and Data Relay Satellite, during a period of low solar activity in January 1987. The average values of the estimated coefficients (C, S) sub 15,15 are used to modify the GEM-9 model, and orbit determination performance is tested on 17 consecutive 34-hour operational tracking data arcs in January 1987. Significant reductions in the mean values and standard deviations of the along-track position difference and the drag model scaling parameter from solution to solution are observed. The approach is guided by the shallow resonance theory of geopotential orbit perturbations.

Hoge, S. L.↗
NASA NTRS1989

Experimental determination of stator endwall heat transfer

Local Stanton numbers were experimentally determined for the endwall surface of a turbine vane passage. A six vane linear cascade having vanes with an axial chord of 13.81 cm was used. Results were obtained for Reynolds numbers based on inlet velocity and axial chord between 73,000 and 495,000. The test section was connected to a low pressure exhaust system. Ambient air was drawn into the test section, inlet velocity was controlled up to a maximum of 59.4 m/sec. The effect of the inlet boundary layer thickness on the endwall heat transfer was determined for a range of test section flow rates. The liquid crystal measurement technique was used to measure heat transfer. Endwall heat transfer was determined by applying electrical power to a foil heater attached to the cascade endwall. The temperature at which the liquid crystal exhibited a specific color was known from a calibration test. Lines showing this specific color were isotherms, and because of uniform heat generation they were also lines of nearly constant heat transfer. Endwall static pressures were measured, along with surveys of total pressure and flow angles at the inlet and exit of the cascade.

Boyle, Robert J.↗
NASA NTRS1988

A general model for attitude determination error analysis

An overview is given of a comprehensive approach to filter and dynamics modeling for attitude determination error analysis. The models presented include both batch least-squares and sequential attitude estimation processes for both spin-stabilized and three-axis stabilized spacecraft. The discussion includes a brief description of a dynamics model of strapdown gyros, but it does not cover other sensor models. Model parameters can be chosen to be solve-for parameters, which are assumed to be estimated as part of the determination process, or consider parameters, which are assumed to have errors but not to be estimated. The only restriction on this choice is that the time evolution of the consider parameters must not depend on any of the solve-for parameters. The result of an error analysis is an indication of the contributions of the various error sources to the uncertainties in the determination of the spacecraft solve-for parameters. The model presented gives the uncertainty due to errors in the a priori estimates of the solve-for parameters, the uncertainty due to measurement noise, the uncertainty due to dynamic noise (also known as process noise or measurement noise), the uncertainty due to the consider parameters, and the overall uncertainty due to all these sources of error.

Markley, F. Landis↗
NASA NTRS1988

A multi-satellite orbit determination problem in a parallel processing environment

The Engineering Orbit Analysis Unit at GE Valley Forge used an Intel Hypercube Parallel Processor to investigate the performance and gain experience of parallel processors with a multi-satellite orbit determination problem. A general study was selected in which major blocks of computation for the multi-satellite orbit computations were used as units to be assigned to the various processors on the Hypercube. Problems encountered or successes achieved in addressing the orbit determination problem would be more likely to be transferable to other parallel processors. The prime objective was to study the algorithm to allow processing of observations later in time than those employed in the state update. Expertise in ephemeris determination was exploited in addressing these problems and the facility used to bring a realism to the study which would highlight the problems which may not otherwise be anticipated. Secondary objectives were to gain experience of a non-trivial problem in a parallel processor environment, to explore the necessary interplay of serial and parallel sections of the algorithm in terms of timing studies, to explore the granularity (coarse vs. fine grain) to discover the granularity limit above which there would be a risk of starvation where the majority of nodes would be idle or under the limit where the overhead associated with splitting the problem may require more work and communication time than is useful.

Deakyne, M. S.↗
NASA NTRS1988

Preliminary Orbit Determination System (PODS) for Tracking and Data Relay Satellite System (TDRSS)-tracked target Spacecraft using the homotopy continuation method

The Preliminary Orbit Determination System (PODS) provides early orbit determination capability in the Trajectory Computation and Orbital Products System (TCOPS) for a Tracking and Data Relay Satellite System (TDRSS)-tracked spacecraft. PODS computes a set of orbit states from an a priori estimate and six tracking measurements, consisting of any combination of TDRSS range and Doppler tracking measurements. PODS uses the homotopy continuation method to solve a set of nonlinear equations, and it is particularly effective for the case when the a priori estimate is not well known. Since range and Doppler measurements produce multiple states in PODS, a screening technique selects the desired state. PODS is executed in the TCOPS environment and can directly access all operational data sets. At the completion of the preliminary orbit determination, the PODS-generated state, along with additional tracking measurements, can be directly input to the differential correction (DC) process to generate an improved state. To validate the computational and operational capabilities of PODS, tests were performed using simulated TDRSS tracking measurements for the Cosmic Background Explorer (COBE) satellite and using real TDRSS measurements for the Earth Radiation Budget Satellite (ERBS) and the Solar Mesosphere Explorer (SME) spacecraft. The effects of various measurement combinations, varying arc lengths, and levels of degradation of the a priori state vector on the PODS solutions were considered.

Kirschner, S. M.↗
NASA NTRS1988

Correlations between solar activity and operationally determined satellite drag variation parameters

Operational orbit determination of the Earth Radiation Budget Satellite (ERBS) and the Solar Maximum Mission (SMM) spacecraft using the Goddard Trajectory Determination System (GTDS) in the Flight Dynamics Facility (FDF) of the Goddard Space Flight Center (GSFC) has yielded an orbit solution data base of 3 years for ERBS and 8 years for SMM. One of the parameters in each data base is the drag variation parameter used in the GTDS atmospheric drag model; this parameter is solved routinely to accommodate the different atmospheric densities as they are encountered solution to solution. These two data bases of the drag variation parameter solutions are analyzed to evaluate correlations in the variations of the parameter with changes in the 10.7-cm wavelength solar flux, F10.7, and the geomagnetic index. The data for SMM span a wider range of solar flux values and show a stronger correlation. The data for ERBS, which is at a higher altitude and inclination than SMM, show a significant degree of scatter. For both satellites, the data indicate that changes in the drag variation parameter are more strongly correlated with the F10.7 solar flux than with the geomagnetic index. Correlations with the geomagnetic index are apparent only for severe geomagnetic storm conditions. Results from this analysis enhance the understanding of the drag model and the accommodation density variations in operational orbit determination support.

Smith, E. A.↗
NASA NTRS1988

GPS-based precision orbit determination - A Topex flight experiment

Plans for a Topex/Poseiden flight experiment to test the accuracy of using GPS data for precision orbit determination of earth satellites are presented. It is expected that the GPS-based precision orbit determination will provide subdecimeter accuracies in the radial component of the Topex orbit when the extant gravity model is tuned for wavelengths longer than about 1000 kms. The concept, design, flight receiver, antenna system, ground processing, and data processing of GPS are examined. Also, an accurate quasi-geometric orbit determination approach called nondynamic or reduced dynamic tracking which relies on the use of the pseudorange and the carrier phase measurements to reduce orbit errors arising from mismodeled dynamics is discussed.

Melbourne, William G.↗