Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “density distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Self-consistent description of the halo nature of 31 Ne with continuum and pairing correlations

Here a relativistic structure model has previously been used to predict a halo structure for 31 Ne, consistent with halo signatures from measured reaction cross sections of Ne isotopes bombarding Carbon targets. However, previous attempts to calculate those cross sections with reaction models were missing contributions from resonances and pairing correlations in their structure input. Use a reaction model with our relativistic fully microscopic structure model input to predict these cross sections and momentum distributions and analyze for possible halo signatures. Structure input for exotic Ne isotopes were obtained via the analytical continuation of the coupling constant (ACCC) method based on the relativistic mean field (RMF) theory with Bardeen - Cooper - Schrieffer (BCS) pairing approximation, the RAB approach. Total reaction cross sections, one-neutron removal cross sections, and momentum distributions of breakup reaction products were calculated with a Glauber model using our relativistic structure input. Our predictions of total reaction and one-neutron removal cross sections of 31 Ne on a Carbon target were significantly enhanced compared with those of neighboring Neon isotopes, agreeing with measurements at 240 MeV/nucleon and consistent with a single neutron halo. Furthermore, our calculations of the inclusive longitudinal momentum distribution of the 30 Ne and valence neutron residues from the 31 Ne breakup reaction indicate a dilute density distribution in coordinate space, another halo signature. We give a full description of the halo nature of 31 Ne that includes a self-consistent use of pairing and continuum contributions that makes predictions consistent with reaction cross section measurements. This approach can be utilized to determine the halo structure of other exotic nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Observation of Universal Quench Dynamics and Townes Soliton Formation from Modulational Instability in Two-Dimensional Bose Gases

We experimentally study universal nonequilibrium dynamics of two-dimensional atomic Bose gases quenched from repulsive to attractive interactions. Here, we observe the manifestation of modulational instability that, instead of causing collapse, fragments a large two-dimensional superfluid into multiple wave packets universally around a threshold atom number necessary for the formation of Townes solitons. We confirm that the density distributions of quench-induced solitary waves are in excellent agreement with the stationary Townes profiles. Furthermore, our density measurements in the space and time domain reveal detailed information about this dynamical process, from the hyperbolic growth of density waves, the formation of solitons, to the subsequent collision and collapse dynamics, demonstrating multiple universal behaviors in an attractive many-body system in association with the formation of a quasistationary state.

74 ATOMIC AND MOLECULAR PHYSICS↗

Pauling’s rules for oxide-based minerals: A re-examination based on quantum mechanical constraints and modern applications of bond-valence theory to Earth materials

Since their introduction in 1929, Pauling’s five rules have been used by scientists from many disciplines to rationalize and predict stable arrangements of atoms and coordination polyhedra in crystalline solids; amorphous materials such as silicate glasses and melts; nanomaterials, poorly crystalline solids; aqueous cation and anion complexes; and sorption complexes at mineral-aqueous solution interfaces. The predictive power of these simple yet powerful rules was challenged recently by George et al. (2020), who performed a statistical analysis of the performance of Pauling’s five rules for about 5000 oxide crystal structures. They concluded that only 13% of the oxides satisfy the last four rules simultaneously and that the second rule has the most exceptions. They also found that Pauling’s first rule is satisfied for only 66% of the coordination environments tested and concluded that no simple rule linking ionic radius to coordination environment will be predictive due to the variable quality of univalent radii. We address these concerns and discuss quantum mechanical calculations that complement Pauling’s rules, particularly his first (radius sum and radius ratio rule) and second (electrostatic valence rule) rules. We also present a more realistic view of the bonded radii of atoms, derived by determining the local minimum in the electron density distribution measured along trajectories between bonded atoms known as bond paths, i.e., the bond critical point (rc). Electron density at the bond critical point is a quantum mechanical observable that correlates well with Pauling bond strength. Moreover, a metal atom in a polyhedron has as many bonded radii as it has bonded interactions, resulting in metal and O atoms that may not be spherical. O atoms, for example, are not spherical in many oxide-based crystal structures. Instead, the electron density of a bonded oxygen is often highly distorted or polarized, with its bonded radius decreasing systematically from ~1.38 Å when bonded to highly electropositive atoms like sodium to 0.64 Å when bonded to highly electronegative atoms like nitrogen. Bonded radii determined for metal atoms match the Shannon (1976) radii for more electropositive atoms, but the match decreases systematically as the electronegativities of the M atoms increase. As a result, significant departures from the radius ratio rule in the analysis by George et al. (2020) is not surprising. We offer a modified, more fundamental version of Pauling’s first rule and demonstrate that the second rule has a one-to-one connection between the electron density accumulated between the bonded atoms at the bond critical point and the Pauling bond strength of the bonded interaction. Pauling’s second rule implicitly assumes that bond strength is invariant with bond length for a given pair of bonded atoms. Many studies have since shown that this is not the case, and Brown and Shannon (1973) developed an equation and a set of parameters to describe the relation between bond length and bond strength, now redefined as bond valence to avoid confusion with Pauling bond-strength. Brown (1980) used the valence-sum rule, together with the path rule and the valence-matching principle, as the three axioms of bond-valence theory (BVT), a powerful method for understanding many otherwise elusive aspects of crystals and also their participation in dynamic processes. We show how a priori bond-valence calculations can predict unstrained bond-lengths and how bond-valence mapping can locate low-Z atoms in a crystal structure (e.g., Li) or examine possible diffusion pathways for atoms through crystal structures. In addition, we briefly discuss Pauling’s third, fourth, and fifth rules, the first two of which concern the sharing of polyhedron elements (edges and faces) and the common instability associated with structures in which a polyhedron shares an edge or face with another polyhedron and contains high-valence cations. The olivine [α-(MgxFe1–x)2SiO4] crystal structure is used to illustrate the distortions from hexagonal close-packing of O atoms caused by metal-metal repulsion across shared polyhedron edges. We conclude by discussing several applications of BVT to Earth materials, including the use of BVT to: (1) locate H+ ions in crystal structures, including the location of protons in the crystal structures of nominally anhydrous minerals in Earth’s mantle; (2) determine how strongly bonded (usually anionic) structural units interact with weakly bonded (usually cationic) interstitial complexes in complex uranyl-oxide and uranyl-oxysalt minerals using the valence-matching principle; (3) calculate Lewis acid strengths of cations and Lewis base strengths of anions; (4) determine how (H2O) groups can function as bond-valence transformers by dividing one bond into two bonds of half the bond valence; (5) help characterize products of sorption reactions of aqueous cations (e.g., Co2+ and Pb2+) and oxyanions [e.g., selenate (Se6+O4)2- and selenite (Se4+O3)2-] at mineral-aqueous solution interfaces and the important role of protons in these reactions; and (6) help characterize the local coordination environments of highly charged cations (e.g., Zr4+, Ti4+, U4+, U5+, and U6+) in silicate glasses and melts.

Geochemistry & Geophysics↗

Studies of the Virgo cluster. VI - Morphological and kinematical structure of the Virgo cluster

The structure of the Virgo cluster is analyzed on the basis of the positions, Hubble types, and radial velocities of 1277 Virgo cluster galaxies. The surface distribution of galaxies is considered according to type, and is discussed using maps, isopleths, strip counts, and radial-density distributions. It is found that the Virgo cluster shows pronounced double structure. The main concentration has a large velocity dispersion and is made up predominantly of early-type galaxies, while the secondary concentration has a much smaller velocity dispersion and contains late types. There is a strong spatial segregation of the Hubble types, the early-type galaxies being more concentrated toward the cluster center. There is significant substructure in the cluster core. The irregularity of the Virgo cluster in both configuration and velocity space shows that the core and the envelope are still forming, and hence that the cluster is young.

Binggeli, Bruno↗

Density Anomalies in the Mantle and the Gravitational Core-Mantle Interaction

Seismic studies suggest that the bulk of the mantle is heterogeneous, with density variations in depth as well as in horizontal directions (latitude and longitude). This density variation produces a three- dimensional gravity field throughout the Earth. On the other hand, the core density also varies in both time and space, due to convective core flow. Consequently, the fluid outer core and the solid mantle interact gravitationally due to the mass anomalies in both regions. This gravitational core-mantle interaction could play a significant role in exchange of angular momentum between the core and the mantle, and thus the change in Earth's rotation on time scales of decades and longer. Aiming at estimating the significance of the gravitational core-mantle interaction on Earth's rotation variation, we introduce in our MoSST core dynamics model a heterogeneous mantle, with a density distribution derived from seismic results. In this model, the core convection is driven by the buoyancy forces. And the density variation is determined dynamically with the convection. Numerical simulation is carried out with different parameter values, intending to extrapolate numerical results for geophysical implications.

Kuang, Weijia↗

Modeling of infrared flux spectra from disk-shaped interstellar dust clouds

Although there is growing observational and theoretical evidence for many disk-shaped objects of astrophysical interest, spherical geometry is assumed in most radiative transfer models. Recently we generalized the quasi-diffusion method developed by Leung (1975, 1976) for spherical geometry to solve the problem of scattering, absorption, and reemission by dust grains in a medium of disk geometry. The method is applicable to a variety of astronomical sources whose dynamics are angular-momentum dominated and hence not accurately treated by spherical geometry, e.g., protoplanetary nebulae, circumstellar disks, bipolar-flow molecular clouds, accretion disks and disk galaxies. Using this technique and realistic grain opacities we construct theoretical models to determine self-consistently the dust temperature distribution and infrared emission from disk-shaped, quiescent dark globules heated externally by the intersteller radiation field. The effects of the following parameters on the temperature structure and the emergent spectrum are studied: grain type (graphite and silicate), optical depth, density inhomogeneity, and degree of disk flattening. The disk models are characterized by an aspect ratio and an optical depth at 0.55 microns. For inhomogeneous models, a gaussian density distribution is assumed such that the ratio of central to surface density is 100. To study the effects of source geometry, we also compare results for models with spherical and disk geometry. In this case both models have the same radius and central optical depth, the disk models having a 1:1 aspect ratio. While the dust temperature distributions in the two cases are very similar, the emergent flux for the disk model depends sensitively on the viewing angle. For clouds which are unresolved, one would expect, since the thermal emission is isotropic in the neighborhood of an emitting grain, and since the emission (in the far infrared) is optically thin, that the emergent flux spectrum should be characteristic only of the dust temperature, and independent of viewing angle. However, because of the lack of complete symmetry and the resulting radiation anisotropy, this is found not to be the case for the disk models. Angle is that it implies a large uncertainty in estimating the radiation dust mass.

Spagna, G. F., Jr.↗

The probability distribution of the predicted CFM-induced ozone depletion

It is argued from the central limit theorem that the uncertainty in model predicted changes of the ozone column density is best represented by a normal probability density distribution. This conclusion is validated by comparison with a probability distribution generated by a Monte Carlo technique. In the case of the CFM-induced ozone depletion, and based on the estimated uncertainties in the reaction rate coefficients alone the relative mean standard deviation of this normal distribution is estimated to be 0.29.

Ehhalt, D. H.↗

Importance of Multiplicity Fluctuations in Entropy Scaling

One of the greatest uncertainties in heavy-ion collisions is the description of the initial state. Different models predict a wide range of initial energy density distributions based on their underlying assumptions. Final flow harmonics are sensitive to these differences in the initial state due to the nearly linear mapping between eccentricities and anisotropic flow harmonics. The Trento code uses a model-agnostic approach by phenomenologically parameterizing the initial state and constraining those parameters from a Bayesian analysis. There the multiplicity fluctuations were determined by a one parameter Γ distribution. However, initial-state models arising from the Color-Glass Condensate (CGC) framework lead to an initial energy density which is outside the functional form considered in Trento and its later Bayesian analyses because they rely on log-normal multiplicity fluctuations. We compare T A T B scaling (CGC-like) to √T A T B scaling (preferred from a Trento Bayesian analysis) and find that the T A T B form together with log-normal fluctuations is a reasonable candidate to describe the multiplicity fluctuations but leads to larger eccentricities, which would affect the extraction of viscosity in small systems.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Computer programs calculate potential and charge distributions in a plasma

Computer program determines the potential and charge distributions between two electrodes in a plasma. Solutions of the Vlasov equations for plane, cylindrical, and spherical geometries are determined and density distributions are found for each of these configurations over a range of conditions.

Jefferies, N. P.↗

Departures from hydrostatic equilibrium in the global distribution of thermospheric argon

This report describes the application of a three-dimensional two-component model to the distribution of argon in the upper atmosphere of the earth. The Cira (1972) model is used to specify the background gas density and the temperature as functions of altitude, latitude, local time, and day of the year. Emphasis is placed on examining the effects of departures from hydrostatic equilibrium on the argon density distribution. Such effects are found to be significant, producing a strong summer argon bulge. Comparisons of the model results with observational data are discussed.

Straus, J. M.↗

Damped Ly α absorbers and atomic hydrogen in galaxies: the view of the GAEA model

ABSTRACT Using the GAEA semi-analytic model, we analyse the connection between Damped Ly α systems (DLAs) and H i in galaxies. Our state-of-the-art semi-analytic model is tuned to reproduce the local galaxy H i mass function, and that also reproduces other important galaxy properties, including the galaxy mass–gas metallicity relation. To produce catalogues of simulated DLAs we throw 105 random lines of sight in a composite simulated volume: dark matter haloes with log$(\frac{M_{200}}{ {\rm M}_{\odot }}) \ge 11.5$ are extracted from the Millennium Simulation, while for $9.2 \le \log (\frac{M_{200}}{ \mathrm{M}_{\odot }})\lt 11.5$ we use the Millennium II, and for $8 \le \log (\frac{M_{200}}{\mathrm{M}_{\odot }}) \lt 9.2$ a halo occupation distribution model. At 2 < z < 3, where observational data are more accurate, our fiducial model predicts the correct shape of the column density distribution function, but its normalization falls short of the observations, with the discrepancy increasing at higher redshift. The agreement with observations is significantly improved increasing both the H i masses and the disc radii of model galaxies by a factor of 2, as implemented ‘a posteriori’ in our 2M−2R model. In the redshift range of interest, haloes with $M_{200} \ge {10}^{11} \, \mathrm{M}_{\odot }$ give the major contribution to ΩDLA, and the typical DLA host halo mass is $\sim \!{10}^{11} \, \mathrm{M}_{\odot }$. The simulated DLA metallicity distribution is in relatively good agreement with observations, but our model predicts an excess of DLAs at low metallicities. Our results suggest possible improvements for the adopted modelling of the filtering mass and metal ejection in low-mass haloes.

Di Gioia, Serafina↗

Using strong lensing to detect subhaloes with steep inner density profiles

ABSTRACT The inner region of a subhalo’s density distribution is particularly sensitive to dark matter microphysics, with alternative dark matter models leading to both cored and steeply-rising inner density profiles. This work investigates how the lensing signature and detectability of dark matter subhaloes in mock HST-, Euclid-, and JWST-like strong lensing observations depend on the subhalo’s radial density profile, especially with regards to the inner power-law slope, $\beta$. We demonstrate that the minimum subhalo mass detectable along the Einstein ring of a system is strongly dependent on $\beta$. In particular, we show that subhaloes with $\beta = 2.2$ can be detected down to masses over an order-of-magnitude lower than their Navarro–Frenk–White (NFW) counterparts with $\beta = 1$. Importantly, we find that the detectability of subhaloes with steep inner profiles is minimally affected by increasing the complexity of the main lens galaxy’s mass model. This is a notable characteristic of these subhaloes, as those with NFW or shallower profiles become essentially undetectable when multipole perturbations are added to the lens model. The results of this work highlight how the underlying dark matter physics can significantly impact the expected number of subhalo detections from strong gravitational lensing observations. This is important for testing Cold Dark Matter against alternative models, such as Self-Interacting Dark Matter, that predict a diverse range of subhalo inner density profiles.

dark matter↗

Modeling Molecular Hydrogen in Low-metallicity Galaxies

We use a suite of hydrodynamics simulations of the interstellar medium (ISM) within a galactic disk, which includes radiative transfer, a nonequilibrium model of molecular hydrogen, and a realistic model for star formation and feedback, to study the structure of the ISM and H 2 abundance as a function of local ISM properties. We show that the star formation rate and structure of the ISM are sensitive to the metallicity of the gas with a progressively smoother density distribution with decreasing metallicity. In addition to the well-known trend of the H I–H 2 transition shifting to higher densities with decreasing metallicity, the maximum achieved molecular fraction in the ISM drops drastically at Z ≲ 0.2 Z ⊙ as the formation time of H 2 becomes much longer than a typical lifetime of dense regions of the ISM. We present accurate fitting formulae for both volumetric and projected ƒ H 2 measured on different scales as a function of gas metallicity, UV radiation field, and gas density. We show that when the formulae are applied to the patches in the simulated galaxy, the overall molecular gas mass is reproduced to better than a factor of ≲1.5 across the entire range of metallicities and scales. We also show that the presented fit is considerably more accurate than any of the previous ƒ H 2 models and fitting formulae in the low-metallicity regime. The fit can thus be used for modeling molecular gas in low-resolution simulations and semi-analytic models of galaxy formation in the dwarf and high-redshift regimes.

79 ASTRONOMY AND ASTROPHYSICS↗

XUV electron density diagnostics for solar flares

Potential electron-density diagnostics for the high-temperature component of solar flares are studied with reference to the wavelength region from 171 to 630 A. The specific ions discussed include Fe IX through Fe XV, Ni XI through Ni XVII, and ions in the beryllium, boron, carbon, and nitrogen isoelectronic sequences. Line ratios that could be useful as density indicators under solar-flare conditions are indicated, available data for the ions considered are reviewed, and several theoretical intensity ratios are plotted. The results are employed to determine the electron-density distribution as a function of electron temperature for several spectra from two flares. For these flares it is found that the electron density increases from 10 billion to 500 billion per cu cm for a temperature increase from 1 million to 10 million K.

Dere, K. P.↗

The nearby Abell clusters. II - Luminosity and spatial distribution of galaxies in A2175, A2256, and A2384

The luminosity and spatial distributions of galaxies in the nearby Abell clusters A2175, A2256, and A2384 have been studied using an automated object detection, classification, and photometry system. Schecter functions have been fit to the observed luminosity functions of these clusters. Values of the characteristic magnitude Mr(asterisk) at the 'break' in the luminosity function (LF) are found that are within about 0.25 mag of the so-called 'universal' value of Mr(asterisk) for A2256 and A2384. The faint ends of the LFs of these two clusters are fairly flat, with a value of -1.6 that is steeper than the universal value of -1.25. The spatial distributions of galaxies in all three clusters seem to be described fairly well by power laws, with no evidence for constant-density cores, when the cluster center is assumed to be the central D or cD galaxy. These results indicate a strong correlation between the density distribution of galaxies and the presence of a dominant D or cD galaxy in the cluster.

Oegerle, William R.↗

Model atmospheres for the early stages of novae in outburst

For the photospheres of classical novae during the early stages of their outbursts, continuum and line blanketed models are presented. The expanding envelopes are characterized by small density gradients that lead to very large geometrical extensions and large temperature differences between inner and outer parts. The spectra show large excesses in the IR and small Balmer jumps which may either be in absorption or emission. For the parameters considered most lines are in absorption if powerlaw density distributions and radiative equilibrium are assumed. The effects of modifications in the temperature structure (e.g., heating from shock fronts) and in the density stratifications as well as changes in the abundances are discussed.

Wehrse, R.↗

One-dimensional hybrid satellite track model for the Dynamics Explorer 2 (DE 2) satellite

A one-dimensional hybrid satellite track model has been developed to calculate the high-latitude thermospheric/ionospheric structure below the satellite altitude using Dynamics Explorer 2 (DE 2) satellite measurements and theory. This model is based on Emery et al. (1985) satellite track code but also includes elements of Roble et al. (1987b) global mean thermosphere/ionosphere model. A number of parameterizations and data handling techniques are used to input satellite data from several DE 2 instruments into this model. Profiles of neutral atmospheric densities are determined from the Mass Spectrometer Incoherent Scatter 1990 (MSIS-90) model and measured neutral temperatures. Measured electron precipitation spectra are used in an auroral model to calculate particle impact ionization rates below the satellite. These rates are combined with a solar ionization rate profile and used to solve the O(+) diffusion equation, with the measured electron density as an upper boundary condition. The calculated O(+) density distribution, as well as the ionization profiles, are then used in a photochemical equilibrium model to calculate the electron and molecular ion densities. The electron temperature is also calculated by solving the electron energy equation with an upper boundary condition determined by the DE 2 measurement. The model enables calculations of altitude profiles of conductivity and Joule heating rate along and below the satellite track. In a first application of the new model, a study is made of thermospheric and ionospheric structure below the DE 2 satellite for a single orbit which occurred on October 25, 1981. The field-aligned Poynting flux, which is independently obtained for this orbit, is compared with the model predictions of the height-integrated energy conversion rate. Good quantitative agreement between these two estimates has been reached. In addition, measurements taken at the incoherent scatter radar site at Chatanika (65.1 deg N, 147.4 deg W) during a DE 2 overflight are compared with the model calculations. A good agreement was found in lower thermospheric conductivities and Joule heating rate.

Deng, Wei↗