Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “defect chemistry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Chemical Sensing and Chemoresponsive Pumping with Conical-Pore Polymeric Membranes

Synthetic membranes containing asymmetrically shaped pores have been shown to rectify the ionic current flowing through the membrane. Ion-current rectification means that such membranes produce nonlinear current–voltage curves analogous to those observed with solid-state diode rectifiers. In order to observe this ion-current rectification phenomenon, the asymmetrically shaped pores must have pore-wall surface charge. Pore-wall surface charge also allows for electroosmotic flow (EOF) to occur through the membrane. We have shown that, because ion-current is rectified, EOF is likewise rectified in such membranes. This means that flow through the membrane depends on the polarity of the voltage applied across the membrane, one polarity producing a higher, and the opposite producing a lower, flow rate. As is reviewed here, these ion-current and EOF rectification phenomena are being used to develop new sensing technologies. Results obtained from an ion-current-based sensor for hydrophobic cations are reviewed. In addition, ion-current and EOF rectification can be combined to make a new type of device—a chemoresponsive nanofluidic pump. This is a pump that either turns flow on or turns flow off, when a specific chemical species is detected. Results from a prototype Pb 2+ chemoresponsive pump are also reviewed here.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Correlative Nanoscale Imaging of Strained hBN Spin Defects

Spin defects like the negatively charged boron vacancy color center (V B - ) in hexagonal boron nitride (hBN) may enable new forms of quantum sensing with near-surface defects in layered van der Waals heterostructures. Here, the effect of strain on V B - color centers in hBN is revealed with correlative cathodoluminescence and photoluminescence microscopies. Strong localized enhancement and redshifting of the V B - luminescence is observed at creases, consistent with density functional theory calculations showing V B - migration toward regions with moderate uniaxial compressive strain. The ability to manipulate spin defects with highly localized strain is critical to the development of practical 2D quantum devices and quantum sensors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Simulations of self- and Xe diffusivity in uranium mononitride including chemistry and irradiation effects

A combination of density functional theory and empirical potential atomic scale simulations have been used to determine a model for defect stability and mobility in uranium mononitride (UN), as a function of temperature (T) and N 2 partial pressure (p N 2 ). Using the model, predictions of hypo-stoichiometry under U-rich conditions compare favorably to CALPHAD calculations using the TAF-ID database. Furthermore, our predictions of U and N self-diffusivity are in good agreement with experiments carried out as a function of T at specific partial pressures under thermal equilibrium. The validated atomic scale data have then been implemented within a cluster dynamics method to simulate irradiation-enhanced defect concentrations. All defects and clusters studied have significantly enhanced concentrations, with respect to thermal equilibrium, as T is lowered. The irradiation-enhanced Xe diffusivity is compared to post-irradiation annealing and in-pile experiments. In conclusion, the contributions of various defects and clusters to non-stoichiometry, self-diffusivity, and Xe diffusivity are discussed.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Role of structural defects in mediating disordering processes at irradiated epitaxial Fe 3 O 4 / Cr 2 O 3 interfaces

Disordering processes in oxide materials are complicated by the presence of interfaces, which can serve as either point defect sinks or accumulation sites; the response depends on factors such as interfacial structure, chemistry, and termination. Here, we have characterized the disordering of epitaxial Fe 3 O 4 (111) / Cr 2 O 3 (0001) thin film heterostructures after 400 keV Ar 2+ radiation at room temperature. The density of misfit dislocations in both the Fe 3 O 4 overlayer and Cr 2 O 3 buffer layer is varied by changing the thickness of Cr 2 O 3 to be pseudomorphically strained to the Al 2 O 3 (0001) substrate (5 nm thick) or partially relaxed (20 nm thick), as confirmed by Bragg filtering analysis of scanning transmission electron microscopy images. In both cases, irradiation leads to damage accumulation on the Fe 3 O 4 side of the heterointerface, as shown by Rutherford backscattering spectrometry measurements in the channeling geometry. However, the interface with more misfit dislocations exhibits disordering at a faster rate than the less-defective interface. Likewise, layer-resolved electron energy loss spectroscopy reveals interfacial reduction of Fe after irradiation at the more defective interface. Intermixing of Cr across the interface is observed by atom probe tomography, which is likely facilitated by the generation of Cr interstitials in Cr 2 O 3 under irradiation.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Density functional study of atomic arrangements in CrMnFeCoNi high-entropy alloy and their impact on vacancy formation energy and segregation

Here, using the density functional theory-coupled Monte Carlo approach, we explored the chemical short-range order (SRO) and element segregation in equimolar CrMnFeCoNi alloy. We found that state-of-the-art approximation of random element distribution is only applicable at > 1100 K close to the melting temperature, while the Cr-Cr repulsion driving the system stabilization and accompanying the formation of cubic Cr sublattice, and mild Ni-Ni attraction are the most prominent pair interactions at lower temperatures. Chemical potential and vacancy formation energy calculations indicate that Cr is most sensitive to the local chemical environment, making Cr atoms most stabilized when the preferred SRO is introduced. While the vacancy formation is predicted equally probable among five constituting elements in the random solid solution, Cr and Ni atoms show the lowest vacancy formation energies in the structure with SRO. Furthermore, distinct element segregation was predicted in the vicinity of planar defects, including symmetric tilt grain boundary and stacking fault, which we correlated to the site- and chemistry-dependent atomic volume and bond lengths. It suggests that the local mechanical strain and bond energy induce the SRO development and element segregation: Namely, the system takes advantage of segregation of Ni atoms having large atomic volume or Cr-Cr pairs having elongated bond lengths to fill in the excess volume at defects that relaxes the mechanical strain field and optimizes bond energy distribution. The correlation between the SRO and properties of CrMnFeCoNi alloy needs further investigations, which is expected to greatly help understand and control the properties of high-entropy alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ab Initio Study of the Effect of Mono-Vacancies on the Metastability of Ga-Stabilized δ-Pu

Most experimental studies on metallic Pu are on the room temperature monoclinic α-phase or the fcc Ga stabilized δ-phase. Stabilized δ-phase Pu-Ga alloys are metastable and exhibit a martensitic phase transformation to α’-phase at low temperatures, or applied shear, with concentrations lower than three atomic percent Ga. By using first principles, we explore the metastability of δ-phase by investigating the structural and electronic behavior induced by Ga alloying and by a mono-vacancy point defect. We find that a site substitutional Ga induces a tetragonal distortion in the lattice affected by hybridization of Ga 4p and Pu 6d states. With the addition of a mono-vacancy, a monoclinic or tetragonal distortion forms locally (dependent on its distance from Ga), and decoupling of the Pu 5f and 6d states and broadening of the 6d states occurs. This response enables hybridization of Pu 6d with the Ga 4p states affecting the mono-vacancy formation energy. Thus, stabilization of the fcc lattice correlates with hybridization of Pu 6d states with Ga 4p states, and this becomes more evident in the presence of a mono-vacancy.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Periplasmic biomineralization for semi-artificial photosynthesis

Semiconductor-based biointerfaces are typically established either on the surface of the plasma membrane or within the cytoplasm. In Gram-negative bacteria, the periplasmic space, characterized by its confinement and the presence of numerous enzymes and peptidoglycans, offers additional opportunities for biomineralization, allowing for nongenetic modulation interfaces. We demonstrate semiconductor nanocluster precipitation containing single- and multiple-metal elements within the periplasm, as observed through various electron- and x-ray-based imaging techniques. The periplasmic semiconductors are metastable and display defect-dominant fluorescent properties. Unexpectedly, the defect-rich (i.e., the low-grade) semiconductor nanoclusters produced in situ can still increase adenosine triphosphate levels and malate production when coupled with photosensitization. We expand the sustainability levels of the biohybrid system to include reducing heavy metals at the primary level, building living bioreactors at the secondary level, and creating semi-artificial photosynthesis at the tertiary level. The biomineralization-enabled periplasmic biohybrids have the potential to serve as defect-tolerant platforms for diverse sustainable applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Chemomechanical modification of quantum emission in monolayer WSe2

Abstract Two-dimensional (2D) materials have attracted attention for quantum information science due to their ability to host single-photon emitters (SPEs). Although the properties of atomically thin materials are highly sensitive to surface modification, chemical functionalization remains unexplored in the design and control of 2D material SPEs. Here, we report a chemomechanical approach to modify SPEs in monolayer WSe 2 through the synergistic combination of localized mechanical strain and noncovalent surface functionalization with aryl diazonium chemistry. Following the deposition of an aryl oligomer adlayer, the spectrally complex defect-related emission of strained monolayer WSe 2 is simplified into spectrally isolated SPEs with high single-photon purity. Density functional theory calculations reveal energetic alignment between WSe 2 defect states and adsorbed aryl oligomer energy levels, thus providing insight into the observed chemomechanically modified quantum emission. By revealing conditions under which chemical functionalization tunes SPEs, this work broadens the parameter space for controlling quantum emission in 2D materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Functional Photoresists for Energy Applications. Final Report

Monolithic ultralow-density porous bulk materials have recently attracted much interest due to many emerging applications in the areas of catalysis, energy storage and conversion, and thermal insulation. They are also important components of high energy density (HED) and inertial confinement fusion (ICF) targets. However, despite tremendous progress that has been made in the synthesis of porous materials, deterministic and independent control over microscopic architecture, density and composition remain key issues, and their integration in high precision devices requires cost and time-intensive mechanical machining that not only reduces reproducibility by generating debris but also limits the complexity of the 3D shapes that can be realized. In this project, we overcame these limitations by developing a universal templating capability that provides deterministic and independent control over density, composition, architecture, and macroscopic sample shape. This was achieved by developing the technology to 1) 3D print ultrahigh resolution, ultra-high precision polymeric micro-lattice templates, 2) coat these templates with the desired materials, and 3) removing the template (Fig. 1a). Atomic layer deposition (ALD) provides the atomic scale coating thickness accuracy required for precisely controlling density. While this templating approach had been demonstrated in prior work, limitations in suitable photoresists, 3D print technologies, print design, and template removal techniques did not allow the fabrication of millimeter-sized high-precision parts with sub-micron resolution. To enable this technology, we developed 1) two-photon polymerization (TPP) print designs that enable the fabrication of millimeter-sized, mechanically robust polymeric templates with sub-micron resolution and 2) a continuum level TPP printing simulation capability for additional print design guidance; 3) atomistic models to study photoresist polymerization kinetics and network topography, 4) refractive index matched polymeric and preceramic TPP photoresists, and 5) functional TPP photoresists including porous voxel structures and self-immolative polymer photoresist chemistries; and 6) damage free template removal techniques that enable the fabrication of defect-free high-precision low-density foam components. We also developed a templating approach for pure carbon microlattices with a unique tube-in-tube ligament morphology. As a test platform, we pursued the fabrication of foam liners that promise to further increase the neutron yield in indirect drive ICF experiments by improving implosion symmetry control and coupling between the laser and the deuterium-tritium fuel. This application requires fabrication and integration of a ultra-high precision, millimeter-sized, thin-walled (200-400 micrometer thick), low-density (10-30 mg/cc), high atomic number (high Z) cylindrical foam tube into the gold hohlraum of an indirect drive ICF target (Fig. 1b). While our hohlraum liner test case will mainly find application in HED and ICF experiments, the underlying science will also directly apply to previously developed nanoparticle and additive manufacturing technologies and will advance those techniques as well.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Suppressed Lone Pair Electrons Explain Unconventional Rise of Lattice Thermal Conductivity in Defective Crystalline Solids

Manipulating thermal properties of materials can be interpreted as the control of how vibrations of atoms (known as phonons) scatter in a crystal lattice. Compared to a perfect crystal, crystalline solids with defects are expected to have shorter phonon mean free paths caused by point defect scattering, leading to lower lattice thermal conductivities than those without defects. While this is true in many cases, alloying can increase the phonon mean free path in the Cd-doped AgSnSbSe 3 system to increase the lattice thermal conductivity from 0.65 to 1.05 W m –1 K –1 by replacing 18% of the Sb sites with Cd. It is found that the presence of lone pair electrons leads to the off-centering of cations from the centrosymmetric position of a cubic lattice. X-ray pair distribution function analysis reveals that this structural distortion is relieved when the electronic configuration of the dopant element cannot produce lone pair electrons. Furthermore, a decrease in the Grüneisen parameter with doping is experimentally confirmed, establishing a relationship between the stereochemical activity of lone pair electrons and the lattice anharmonicity. The observed “harmonic” behavior with doping suggests that lone pair electrons must be preserved to effectively suppress phonon transport in these systems.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Radiation‐Induced Defects in Uranyl Trinitrate Solids

Abstract Actinides are inherently radioactive; thus, ionizing radiation is emitted by these elements can have profound effects on its surrounding chemical environment through the formation of free radical species. While previous work has noted that the presence of free radicals in the system impacts the redox state of the actinides, there is little atomistic understanding of how these metal cations interact with free radicals. Herein, we explore the effects of radiation (UV and γ) on three U(VI) trinitrate complexes, M[UO 2 (NO 3 ) 3 ] (where M=K + , Rb + , Cs + ), and their respective nitrate salts in the solid state via electron paramagnetic resonance (EPR) and Raman spectroscopy paired with Density Functional Theory (DFT) methods. We find that the alkali salts form nitrate radicals under UV and γ irradiation, but also note the presence of additional degradation products. M[UO 2 (NO 3 ) 3 ] solids also form nitrate radicals and additional DFT calculations indicate the species corresponds to a change from the bidentate bound nitrate anion into a monodentate NO 3 • radical. Computational studies also highlight the need to include the second sphere coordination environment around the [UO 2 (NO 3 ) 3 ] 0,1 species to gain agreement between the experimental and predicted EPR signatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

High-throughput screening of 2D materials identifies p-type monolayer WS2 as potential ultra-high mobility semiconductor

Abstract 2D semiconductors offer a promising pathway to replace silicon in next-generation electronics. Among their many advantages, 2D materials possess atomically-sharp surfaces and enable scaling the channel thickness down to the monolayer limit. However, these materials exhibit comparatively lower charge carrier mobility and higher contact resistance than 3D semiconductors, making it challenging to realize high-performance devices at scale. In this work, we search for high-mobility 2D materials by combining a high-throughput screening strategy with state-of-the-art calculations based on the ab initio Boltzmann transport equation. Our analysis singles out a known transition metal dichalcogenide, monolayer WS 2 , as the most promising 2D semiconductor, with the potential to reach ultra-high room-temperature hole mobilities in excess of 1300 cm 2 /Vs should Ohmic contacts and low defect densities be achieved. Our work also highlights the importance of performing full-blown ab initio transport calculations to achieve predictive accuracy, including spin–orbital couplings, quasiparticle corrections, dipole and quadrupole long-range electron–phonon interactions, as well as scattering by point defects and extended defects.

Chemistry↗
DOE OSTI2025

Stable Metal–Organic Electrocatalysts for Anion-Exchange Membrane Water Electrolyzers by Defect Engineering

Developing efficient and durable catalysts for the alkaline oxygen evolution reaction (OER) is vital to achieving practical anion-exchange membrane water electrolyzers (AEMWE) for green hydrogen production. In this work, we break the activity-stability trade-off of electrocatalysis by defect engineering of Ni-based metal-organic electrocatalysts (Ni-benzene dicarboxylate; Ni-BDC) through coordinating ferrocenecarboxylates (Fc) to the metal sites. Experimental results collectively reveal that the defect MOF (Ni-BDC:Fc_5:1) exhibits a high OER turnover frequency of 0.75 O 2 s -1 at 300 mV overpotential. Operando Raman spectroscopy and isotope-labelling electrochemical mass spectrometry measurements indicate the structure of Ni-BDC:Fc_5:1 is also more stable in service than that of pure Ni-BDC. The high activity and stability could be attributed to the moderate defects (i.e., unsaturated Ni sites) in the structure that not only increase the intrinsic activity and stability of the local active environment by inhibiting lattice oxygen exchange, but also electrochemically activates the bulk of the catalysts by creating a porous network that facilitates internal H 2 O/OH - conduction with enhanced electronic conduction. Accordingly, an AEMWE employing Ni-BDC:Fc_5:1 as the OER catalyst delivers an industrial-level current density of 1 A cm -2 at 1.73 V cell and can be steadily operated for more than 120 hours.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Printing noble metal alloy films with compositional gradient

Additive manufacturing has offered great promise in fabricating materials and devices with complex structures and unique properties. In addition to complex structures, additive manufacturing also allows for local changes to material compositions and/or structure, ideal for combinatorial material investigations. Besides, advantages over freedom of design, mass customization, waste minimization and the capability to fast prototyping, the on-demand control of compositional distributions in low dimensional materials remains challenging. In this work, we demonstrate a combinatorial aerosol jet printing technique to create noble metal films with gradient compositions. Nanoparticle sizes and ink chemistry are critical for aerosol jet printing and sintering process in order to achieve defect free thin films. Ruthenium (Ru) and platinum (Pt) nanoparticles with size <5 nm were synthesized and formulated into printable inks. Further, after thermal sintering at temperature as low as 400 °C, printed nanoparticles formed highly reflective films free from microstructural defect. Alloy films of gradient compositions were realized via in-situ mixing Ru and Pt ink streams and varying the mixing ratio during the printing process. This combinatorial printing method provides great potential to rapidly transform nanoparticle inks into new materials compositions and structures unobtainable via conventional methods for high-throughput materials studies.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Creation of Single-Photon Emitters in WSe 2 Monolayers Using Nanometer-Sized Gold Tips

Due to their tunable bandgaps and strong spin-valley locking, transition metal dichalcogenides constitute a unique platform for hosting single-photon emitters. Here, we present a versatile approach for creating bright single-photon emitters in WSe 2 monolayers by the deposition of gold nanostars. Our molecular dynamics simulations reveal that the formation of the quantum emitters is likely caused by the highly localized strain fields created by the sharp tips of the gold nanostars. The surface plasmon modes supported by the gold nanostars can change the local electromagnetic fields in the vicinity of the quantum emitters, leading to their enhanced emission intensities. Moreover, by correlating the emission energies and intensities of the quantum emitters, we are able to associate them with two types of strain fields and derive the existence of a low-lying dark state in their electronic structures. The findings here are highly relevant for the development and understanding of single-photon emitters in transition metal dichalcogenide materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Surface Reactivity of Ag-Modified Ceria to Hydrogen: A Combined Experimental and Theoretical Investigation

We investigate the mechanism of H 2 activation on Ag-modified cerium oxide surfaces, of interest for different catalytic applications. The study is performed on thin epitaxial cerium oxide films, investigated by X-ray photoemission spectroscopy to assess the changes of both the Ag oxidation state and the concentration of Ce 3+ ions, O vacancies, and hydroxyl groups on the surface during thermal reduction cycles in vacuum and under hydrogen exposure. The results are interpreted using density functional theory calculations to model pristine and Ag-modified ceria surfaces. Although the reactivity of ceria toward H 2 oxidation improves when a fraction of Ce cations is substituted with Ag, the concentration of reduced Ce 3+ ions in Ag-modified ceria is found to be lower than in pure ceria under the same conditions. This behavior is observed even though the number of surface oxygen vacancies caused by the thermal treatment under hydrogen exposure is larger for the Ag-modified surface. These results are explained in terms of a change of the oxidation state of the surface Ag, which is able to acquire some of the extra surface electrons created by the oxygen vacancies and the adsorbed hydrogen atoms. Our findings provide new insights into the reactivity of Ag-modified ceria, which has been proposed as a promising alternative to platinum electrodes in electrochemical devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗