SEARCH · Engineering Papers

Results for “data requirements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Exploratory Efforts to Constrain Geologic Material Properties from Remote Sensing Data: Joint Study (FY2020 Final Report)

Identification and characterization of underground events from surface or remote data requires a thorough understanding of the rock material properties. However, material properties usually come from borehole data, which is expensive and not always available. A potential alternative is to use topographic characteristics to approximate the strength, but this has never been done before quantitatively. Here we present the results from the first steps towards this goal. We have found that there are strong correlations between compressive and tensile strengths and slopes, but these correlations vary depending on data analysis details. Rugosity may be better correlated to strength than slope values. More comprehensive analyses are needed to fully understand the best method of predicting strength from topography for this area. We also found that misalignment of multiple GIS datasets can have a large influence on the ability to make interpretations. Lastly, these results will require further study in a variety of climatic conditions before being applicable to other sites.

58 GEOSCIENCES↗

DOE OSTI2021

Exploratory Efforts to Constrain Geologic Material Properties from Remote Sensing Data: A Joint Study

42 ENGINEERING↗

DOE OSTI2022

PDFDataExtractor: A Tool for Reading Scientific Text and Interpreting Metadata from the Typeset Literature in the Portable Document Format

The layout of portable document format (PDF) files is constant to any screen, and the metadata therein are latent, compared to mark-up languages such as HTML and XML. No semantic tags are usually provided, and a PDF file is not designed to be edited or its data interpreted by software. However, data held in PDF files need to be extracted in order to comply with opensource data requirements that are now government-regulated. In the chemical domain, related chemical and property data also need to be found, and their correlations need to be exploited to enable data science in areas such as data-driven materials discovery. Such relationships may be realized using text-mining software such as the “chemistry-aware” natural-language-processing tool, ChemDataExtractor; however, this tool has limited data-extraction capabilities from PDF files. This study presents the PDFDataExtractor tool, which can act as a plug-in to ChemDataExtractor. It outperforms other PDF-extraction tools for the chemical literature by coupling its functionalities to the chemical-named entityrecognition capabilities of ChemDataExtractor. The intrinsic PDF-reading abilities of ChemDataExtractor are much improved. The system features a template-based architecture. This enables semantic information to be extracted from the PDF files of scientific articles in order to reconstruct the logical structure of articles. While other existing PDF-extracting tools focus on quantity mining, this template-based system is more focused on quality mining on different layouts. PDFDataExtractor outputs information in JSON and plain text, including the metadata of a PDF file, such as paper title, authors, affiliation, email, abstract, keywords, journal, year, document object identifier (DOI), reference, and issue number. With a self-created evaluation article set, PDFDataExtractor achieved promising precision for all key assessed metadata areas of the document text.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

HP-MDR: High-performance and Portable Data Refactoring and Progressive Retrieval with Advanced GPUs

Scientific applications produce vast amounts of data, posing grand challenges in the underlying data management and analytic tasks. Progressive compression is a promising way to address this problem, as it allows for on-demand data retrieval with significantly reduced data movement cost. However, most existing progressive methods are designed for CPUs, leaving a gap for them to unleash the power of today’s heterogeneous computing systems with GPUs.In this work, we propose HP-MDR, a high-performance and portable data refactoring and progressive retrieval framework for GPUs. Our contributions are four-fold: (1) We carefully optimize the bitplane encoding and lossless encoding, two key stages in progressive methods, to achieve high performance on GPUs; (2) We propose pipeline optimization and incorporate it with data refactoring and progressive retrieval workflows to further enhance the performance for large data process; (3) We leverage our framework to enable high-performance data retrieval with guaranteed error control for common Quantities of Interest; (4) We evaluate HP-MDR and compare it with state of the arts using five real-world datasets. Experimental results demonstrate that HP-MDR delivers an average 13.68 × and 6.31 × throughput in data refactoring and progressive retrieval tasks, respectively. It also leads to 11.22 × throughput for recomposing required data representations under Quantity-of-Interest error control and 6.04 × performance for the corresponding end-to-end data retrieval, when compared with state-of-the-art solutions.

Li, Yanliang [University of Oregon]↗

DOE OSTI2025

Deep Design Data Portal (D3P) v0.01

The Deep Design Data Portal (D3P) tool was developed to demonstrate how readily accessible data sources, such as building energy model reports for design and baseline energy performance data for projects, can provide the data required for reporting to an industry initiative (AIA 2030 commitment), as well as more detailed data that makes the industry dataset more valuable to all stakeholders, enabling project level analysis and analysis of BEM industry trends. D3P provides an easier and less time-consuming way for firms to auto-extract data from this data source, compared to the current reporting workflows of the firms. The BEM reports are the first of several data sources that D3P could integrate. D3P also provides the ability for firms to review, compare, and evaluate the performance of their projects to not only their portfolio, but also to the larger anonymized industry dataset created each time a project is added to D3P. The intent of D3P is to become part of a data-sharing ecosystem to assist creating large anonymized industry datasets that are accessible to industry.

Regnier, Cynthia [Lawrence Berkeley National Labor↗

NASA NTRS1967

Data management study, volume 5 Final report

Overall data management for Voyager project based on data system study and contractor data requirements, implementation, and management information studies

SYSTEMS ANALYSIS↗

NASA NTRS1974

Earth Observatory Satellite system definition study. Report no. 3: Design/cost tradeoff studies. Appendix A: EOS program WBS dictionary. Appendix B: EOS mission functional analysis

The work breakdown structure (WBS) dictionary for the Earth Observatory Satellite (EOS) is defined. The various elements of the EOS program are examined to include the aggregate of hardware, computer software, services, and data required to develop, produce, test, support, and operate the space vehicle and the companion ground data management system. A functional analysis of the EOS mission is developed. The operations for three typical EOS missions, Delta, Titan, and Shuttle launched are considered. The functions were determined for the top program elements, and the mission operations, function 2.0, was expanded to level one functions. Selection of ten level one functions for further analysis to level two and three functions were based on concern for the EOS operations and associated interfaces.

Source record↗

NASA NTRS1981

STREAM Table Program: User's manual and program document

This program was designed to be an editor for the Lewis Chemical Equilibrium program input files and is used for storage, manipulation and retrieval of the large amount of data required. The files are based on the facility name, case number, and table number. The data is easily recalled by supplying the sheet number to be displayed. The retrieval basis is a sheet defined to be all of the individual flow streams which comprise a given portion of a coal gasification system. A sheet may cover more than one page of output tables. The program allows for the insertion of a new table, revision of existing tables, deletion of existing tables, or the printing of selected tables. No calculations are performed. Only pointers are used to keep track of the data.

Hiles, K. H.↗

NASA NTRS1991

Current technology applications in a future spaceborne lidar system

NASA is currently developing the Lidar In-space Technology Experiment (LITE) to demonstrate the first use of a lidar system for remote sensing of the atmosphere. LITE will serve as a testbed for evolving technologies. Carried by the Space Shuttle, it is a reusable experiment capable of many reflights with a short turn-around time. This requires that the instrument be of a modular design to facilitate any changes in science data requirements or to incorporate newer technology into the various subsystems. In addition, LITE is required to utilize proven technology and off-the-shelf products in its design. This paper will describe how the design of the instrument, from conceptual to final, must take into account these design requirements as well as those requirements and considerations inherent in a space flight environment.

Crockett, Sharon K.↗

NASA NTRS2016

Validation of a Cephalad Fluid Shift Countermeasure

INTRODUCTION: This project will provide critical data required to objectively determine how an optimized thigh cuff could be incorporated into the NASA integrated physiological countermeasure suite. This project will determine if thigh cuffs used during simulated spaceflight impact intracranial pressure (ICP), ocular structure and function, and intraocular pressure (IOP) using state of-the-art techniques. Additionally, some of the same methods, hardware, and protocols will be employed in the present investigation to enable direct comparisons to the International Space Station (ISS) "Fluid Shifts" experiment with Chibis-Lower Body Negative Pressure (LBNP). This study will determine the temporal physiological responses of thigh cuff application and removal on ocular and cerebral variables (including invasive ICP) in a microgravity analog. Furthermore, this proposed study will determine tissue pressure distribution applied by thigh cuffs in order to improve comfort, mobility, and efficacy of the countermeasure. Our specific aim is to determine the efficacy of a novel thigh cuff device to mitigate cephalad fluid shifts. We hypothesize that a thigh cuff countermeasure employed in a microgravity analog will temporarily reverse or attenuate ocular and cerebral-volume-pressure variables, approaching normal Earth-based seated posture, the most frequent posture assumed in daily life. In addition, we hypothesize that the magnitude of fluid and pressure redistribution using a thigh cuff countermeasure may require a longer exposure time than that of Chibis-LBNP (using ground-based data from our "Fluid Shifts" project). This project directly addresses Critical Path Roadmap Risks and Questions regarding "Risk of Spaceflight-Induced Intracranial Hypertension/Vision Alterations," and IRP Gap VIIP13: We need to identify preventative and treatment countermeasures to mitigate changes in ocular structure and function and intracranial pressure during spaceflight. METHODS: Noninvasive measures and tissue pressure distributions beneath thigh cuffs The objectives of this study are to: 1) determine the distribution of skin surface pressures beneath the advanced thigh cuff in ten subjects, 2) calibrate the built-in pressure measurement system of the advanced thigh cuff using an industry standard device, and 3) collect subjective feedback and data on the new cuff design to allow for further adjustments prior to invasive studies. A Tekscan Industrial Sensing (I-Scan) system will measure the pressure distribution of the advanced thigh cuff against the skin. In addition, we will measure blood pooling in the thigh and record the circumference of the thigh using Hokanson strain gauge plethysmography. The advanced thigh cuff will be adjusted to obtain a skin contact pressure of 30-50 mmHg as visualized on the Tekscan system. The built-in advanced thigh cuff pressure monitor will be recorded simultaneously to allow direct comparison to the Tekscan measurements. The volunteer will then remove the thigh cuff and remain at rest for five minutes with no legging applied. The thigh cuff will be donned again and pressure measurements will be taken in the same manner for up to 10 repetitions to show reproducibility of pressure after donning. At the conclusion of the study, subjects will be asked to flex their knee, stand, walk, and sit with the thigh cuff activated. During each of these maneuvers the subject will rate their pain/comfort using a modified Borg scale. Effect of thigh cuffs on ICP during simulated microgravity Ommaya reservoir patients will be recruited from the John Wayne Cancer Institute. Ommaya reservoirs provide safe and direct access for the measurement of ICP. Subjects will be instrumented for continuous blood pressure, ECG, and invasive ICP measures. The subjects will be positioned in the upright sitting posture for a 10-minute stabilization period. After the 10-minute stabilization period, imaging measures [ICP, Optical Coherence Tomography, IOP, ocular and vascular ultrasound] will be performed. Following baseline seated measures, the subject will be positioned randomly in the supine, 15deg head-down-tilt, and 15deg head-down-tilt with thigh cuffs and measures repeated. DISCUSSION: Tests to down-select thigh cuff designs will occur in early 2016. Invasive ICP and noninvasive eye imaging tests will begin in spring 2016. Supported by NSBRI through NCC 9-58.

Macias, B.↗

NASA NTRS2017

Comparison of Satellite Rainfall Estimates and Rain Gauge Measurements in Italy, and Impact on Landslide Modeling

Landslides can be triggered by intense or prolonged rainfall. Rain gauge measurements are commonly used to predict landslides even if satellite rainfall estimates are available. Recent research focuses on the comparison of satellite estimates and gauge measurements. The rain gauge data from the Italian network (collected in the system database Verifica Rischio Frana" (VRF)) are compared with the National Aeronautics and Space Administration (NASA) Tropical Rainfall Measuring Mission (TRMM) products. For the purpose, we couple point gauge and satellite rainfall estimates at individual grid cells, evaluating the correlation between gauge and satellite data in different morpho-climatological conditions. We then analyze the statistical distributions of both rainfall data types and the rainfall events derived from them. Results show that satellite data underestimates ground data, with the largest differences in mountainous areas. Power-law models, are more appropriate to correlate gauge and satellite data. The gauge and satellite-based products exhibit different statistical distributions and the rainfall events derived from them differ. In conclusion, satellite rainfall cannot be directly compared with ground data, requiring local investigation to account for specific morpho-climatological settings. Results suggest that satellite data can be used for forecasting landslides, only performing a local scaling between satellite and ground data.

landslide; satellite rainfall; TRMM; rain gauges; ↗

DOE OSTI2024

Autonomous hybrid optimization of a SiO 2 plasma etching mechanism

Computational modeling of plasma etching processes at the feature scale relevant to the fabrication of nanometer semiconductor devices is critically dependent on the reaction mechanism representing the physical processes occurring between plasma produced reactant fluxes and the surface, reaction probabilities, yields, rate coefficients, and threshold energies that characterize these processes. The increasing complexity of the structures being fabricated, new materials, and novel gas mixtures increase the complexity of the reaction mechanism used in feature scale models and increase the difficulty in developing the fundamental data required for the mechanism. This challenge is further exacerbated by the fact that acquiring these fundamental data through more complex computational models or experiments is often limited by cost, technical complexity, or inadequate models. In this paper, we discuss a method to automate the selection of fundamental data in a reduced reaction mechanism for feature scale plasma etching of SiO 2 using a fluorocarbon gas mixture by matching predictions of etch profiles to experimental data using a gradient descent (GD)/Nelder–Mead (NM) method hybrid optimization scheme. These methods produce a reaction mechanism that replicates the experimental training data as well as experimental data using related but different etch processes.

36 MATERIALS SCIENCE↗

NASA NTRS1978

Energy impact assessment of NASA's past, present, and future space launch vehicles

An approach to analyze the total energy required for overall support of space launch vehicles is outlined along with some of the basic data required for such analyses. Selected results obtained by using this approach are presented for various past (some are already phased out), present, and future NASA launch vehicles, including an estimate of the total annual energy required to support one projected NASA launch vehicle traffic model. The material presented is expected to give a better insight into the details of an energy impact analysis. Major conclusions are that: (1) for expendable launch vehicle systems, the energy required to manufacture hardware and support launch operations is most significant; (2) for totally reusable systems, the energy required to process/manufacture propellants and fluids is by far the most significant contributor; and (3) up to 1991, the projected highest annual energy requirement for the NASA launch vehicles does not constitute a significant energy impact relative to the nation's total energy needs.

Rice, E. E.↗

NASA NTRS1991

Aerothermodynamic heating environment and thermal protection materials comparison for manned Mars-earth return vehicles

The aerothermodynamic environment during the earth return portion of a specific manned Mars mission is studied. Particular attention is given to the earlier smaller crew return capsule and its thermal protection system requirements. Data are presented on the stagnation region of a generic Mars return capsule. Insulation material thicknesses required to maintain allowable structural temperatures throughout a prolonged heat soak period are estimated.

Henline, William D.↗

NASA NTRS1993

Redundancy reduction in image coding

We assess redundancy reduction in image coding in terms of the information acquired by the image-gathering process and the amount of data required to convey this information. A clear distinction is made between the theoretically minimum rate of data transmission, as measured by the entropy of the completely decorrelated data, and the actual rate of data transmission, as measured by the entropy of the encoded (incompletely decorrelated) data. It is shown that the information efficiency of the visual communication channel depends not only on the characteristics of the radiance field and the decorrelation algorithm, as is generally perceived, but also on the design of the image-gathering device, as is commonly ignored.

Rahman, Zia-Ur↗

NASA NTRS2000

Improved Quality in Aerospace Testing Through the Modern Design of Experiments

This paper illustrates how, in the presence of systematic error, the quality of an experimental result can be influenced by the order in which the independent variables are set. It is suggested that in typical experimental circumstances in which systematic errors are significant, the common practice of organizing the set point order of independent variables to maximize data acquisition rate results in a test matrix that fails to produce the highest quality research result. With some care to match the volume of data required to satisfy inference error risk tolerances, it is possible to accept a lower rate of data acquisition and still produce results of higher technical quality (lower experimental error) with less cost and in less time than conventional test procedures, simply by optimizing the sequence in which independent variable levels are set.

DeLoach, R.↗

NASA NTRS2002

Evaluation of Fatigue Crack Growth and Fracture Properties of Cryogenic Model Materials

The criteria used to prevent failure of wind-tunnel models and support hardware were revised as part of a project to enhance the capabilities of cryogenic wind tunnel testing at NASA Langley Research Center. Specifically, damage-tolerance fatigue life prediction methods are now required for critical components, and material selection criteria are more general and based on laboratory test data. The suitability of two candidate model alloys (AerMet 100 and C-250 steel) was investigated by obtaining the fatigue crack growth and fracture data required for a damage-tolerance fatigue life analysis. Finally, an example is presented to illustrate the newly implemented damage tolerance analyses required of wind-tunnel model system components.

Newman, John A.↗

NASA NTRS2023

Machine Learning Framework for Hazard Extraction and Analysis of Trends (HEAT) in Wildfire Response

This research proposes a natural language processing enabled risk analysis framework, named Hazard Extraction andAnalysis of Trends (HEAT), and applies the framework to the ICS-209-PLUS data set of wildfire incident responseforms. The HEAT framework produces safety- and risk- relevant analyses, consisting of: (1) a set of hazards extractedfrom text data, (2) a primary analysis using hazard-relevant metrics, such as rate and severity, to form an FMEA-styletable and risk matrix, (3) a time series analysis of metric trends, and (4) a secondary analysis examining potentialpredictors for hazards. Results from HEAT provide quantitative risk-relevant information for high-level hazards doc-umented in existing-state operations. Because of the generalizability of the steps and limited data requirements, HEATcan be applied to any dataset containing narrative text, thus providing a framework for data-driven machine learning-enabled quantitative risk analysis across a variety of domains. To demonstrate HEAT in a case study, we apply theframework to the ICS-209-PLUS dataset of wildland fire incident response forms. Hazards identified in wildfire re-sponse arise from environmental conditions, the mission, and the wildland urban interface. The resulting risk matrixidentifies evacuations as high-risk hazards, while all other identified hazards are medium or serious risk.

natural language processing↗