SEARCH · Engineering Papers

Results for “cumulative impacts”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

All sources NASA NTRS DOE OSTI

NASA NTRS1983

Induced environment contamination monitor (IECM) cascade impactor

The Cascade Impactor on the IECM is an aerosol sampling instrument which employs three cascade impaction-type nozzles of progressively smaller diameter. The considered approach makes it possible to achieve particle size discrimination involving three ranges (5 microns and larger, 1 to 5 microns, and 0.3 to 1 micron). In addition to the particulate measuring cascade stages, a fourth quartz crystal microbalance measures the cumulative airborne molecular nonvolatile residue (NVR) at ambient temperature. The cascade measurements provide a temporal record of the payload bay's particulate environment during ascent, descent, and immediate postlanding periods. The NVR stage functions throughout the mission. Particulates of a size greater than five microns in diameter were below 10 micrograms per cu m throughout the mission.

Duncan, B. J.↗

NASA NTRS2019

Initial TASAR Operations Onboard Alaska Airlines

NASA and Alaska Airlines jointly conducted an operational evaluation of NASA’s Traffic Aware Strategic Aircrew Request (TASAR) concept. Featuring a NASA-developed cockpit automation tool, the Traffic Aware Planner (TAP), and leveraging the emerging “connected aircraft” architecture, TASAR enables pilots to identify route changes compatible with nearby traffic and airspace constraints that improve flight efficiency and are more likely to receive Air Traffic Control approval. TASAR was developed in anticipation of saving fuel and flight time, thereby providing immediate and pervasive benefits to the aircraft operator. Following a previously reported, extensive program of integration and preliminary in-flight testing, the operational evaluation of TASAR in revenue service by Alaska Airlines took place from July 2018 to April 2019. This paper describes the operational evaluation, the methodology for quantifying operational benefits, preliminary benefit results, and other unexpected impacts of TASAR operations during revenue flights. Based on the subset of data available at publication, preliminary estimated benefits averaged about $92 per flight across all flights including those without benefit. Identified factors indicate the estimated benefit per flight was likely a conservative estimate. Benefit categories including home runs, cumulative small gains, and plan validation benefits are illustrated with specific examples observed during the operational evaluation.

Wing, David J.↗

NASA NTRS2020

InSAR-based detection method for mapping and monitoring slow-moving landslides in remote regions with steep and mountainous terrain: An application to Nepal

Mapping and monitoring landslides in remote areas with steep and mountainous terrain is logistically challenging, expensive, and time consuming. Yet, in order to mitigate hazards and prevent loss of life in these areas, and to better understand landslide processes, high-resolution measurements of landslide activity are necessary. Satellite-based synthetic aperture radar interferometry (InSAR) provides millimeter-scale measurements of ground surface deformation that can be used to identify and monitor landslides in remote areas where ground-based monitoring techniques are not feasible. Here we present a novel InSAR deformation detection approach, which uses double difference time-series with local and regional spatial filters and pixel clustering methods to identify and monitor slow-moving landslides without making a priori assumptions of the location of landslides. We apply our analysis to freely available Copernicus Sentinel-1 satellite data acquired between 2014 and 2017 centered on the Trishuli River drainage basin in Nepal. We found a minimum of 6 slow-moving landslides that all occur within the Ranimatta lithologic formation (phyllites, metasandstones, meta basics). These landslides have areas ranging from 0.39 to 1.66 sq.km and long-term dry-season displacement rates ranging from 2.1 to 8.8 cm/yr. Due to periods of low coherence during the monsoon season (June – September) each year, and following the 25 April 2015 Mw7.8 Gorkha earthquake, our time series analysis is limited to the 2014-2015 and 2016-2017 dry seasons (September - May). We found that each of the landslides displayed slightly higher rates during the 2014 period, likely as a result of higher cumulative rainfall that fell during the 2014 monsoon season. Although we do not have high quality InSAR data to show the landslide evolution directly following the Gorkha earthquake, the similar rates of movement before (2014-2015) and after (2016-2017) Gorkha suggest the earthquake had negligible long-term impact on these landslides. Our findings highlight the potential for region-wide mapping of slow-moving l and slides using freely available remote sensing data in remote areas such as Nepal and future work will benefit from expanding our methodology to other regions around the world.

Synthetic Aperture Radar↗

DOE OSTI2026

To bin or not to bin: Does binning in multiplicity reliably suppress unwanted volume fluctuations?

Here, in this study, we examine the effect of the so-called Centrality Bin Width Correction (CBWC) on the measurement of (net-)proton number cumulants in nucleus-nucleus collisions. We present an analytically tractable model, which includes correlations between multiplicity and proton number similar to those generated by the decay of baryon resonances. Within this model, we analyze the circumstances under which the CBWC method correctly removes the undesired effects of volume or impact parameter fluctuations. Additionally, we explore situations where the method fails and produces misleading results.

Critical point↗

NASA NTRS2010

Impact of Atmospheric Infrared Sounder (AIRS) Thermodynamic Profiles on Regional Precipitation Forecasting

In data sparse regions, remotely-sensed observations can be used to improve analyses and lead to better forecasts. One such source comes from the Atmospheric Infrared Sounder (AIRS), which together with the Advanced Microwave Sounding Unit (AMSU), provides temperature and moisture profiles in clear and cloudy regions with accuracy which approaches that of radiosondes. The purpose of this paper is to describe an approach to assimilate AIRS thermodynamic profile data into a regional configuration of the Advanced Research WRF (ARW) model using WRF-Var. Quality indicators are used to select only the highest quality temperature and moisture profiles for assimilation in clear and partly cloudy regions, and uncontaminated portions of retrievals above clouds in overcast regions. Separate error characteristics for land and water profiles are also used in the assimilation process. Assimilation results indicate that AIRS profiles produce an analysis closer to in situ observations than the background field. Forecasts from a 37-day case study period in the winter of 2007 show that AIRS profile data can lead to improvements in 6-h cumulative precipitation forecasts resulting from improved thermodynamic fields. Additionally, in a convective heavy rainfall event from February 2007, assimilation of AIRS profiles produces a more unstable boundary layer resulting in enhanced updrafts in the model. These updrafts produce a squall line and precipitation totals that more closely reflect ground-based observations than a no AIRS control forecast. The location of available high-quality AIRS profiles ahead of approaching storm systems is found to be of paramount importance to the amount of impact the observations will have on the resulting forecasts.

Chou, S.-H.↗

NASA NTRS1980

Crater densities on the satellites of Mars

The density of craters larger than 1 km in diameter has been determined for the entire surface of Phobos, and half that of Deimos. Densities of craters as small as 10 m on Phobos and 5 m on Deimos have been measured for small areas of the satellites. On both objects, crater densities are similar and yield plots which have slopes close to -1.9 on both incremental and cumulative log-log graphs. These densities are close to those expected to obtain under equilibrium conditions. They are also near the maximum predicted, based on the fragmentation lifetimes of the two objects: that is, the densities are near to the maximum possible before such objects are likely to suffer an impact severe enough to disrupt them. While the observed crater densities cannot be converted to absolute ages in any rigorous fashion, they can be understood if the flux at Mars has been similar to that at the Moon and if the surfaces that we see today generally date back to the end of the period of heavy bombardment some 4 billion years ago. It is extremely unlikely that the surfaces are younger than 1 billion years. There are no large areas on Phobos for which crater densities differ by more than a factor of 3 from the average.

Thomas, P.↗

NASA NTRS2012

The Grand Geochemistry of 4 Vesta: First Results

On 12-Dec-2011, the Dawn spacecraft commenced low altitude mapping of the giant asteroid, 4 Vesta (264-km mean radius). Dawn's roughly circular, polar, low altitude mapping orbit (LAMO) has a mean radius of 470 km, placing the spacecraft within about 210 km of Vesta's surface. At these altitudes, Dawn s Gamma Ray and Neutron Detector (GRaND) is sensitive to Vesta's elemental com-position (Fig. 1). GRaND will acquire data in LAMO for up to 16 weeks, which is sufficient to map the elemental composition of the entire surface of Vesta. The timing of LAMO enables us to report the first results of our geochemistry investigation at this conference. In this abstract, we present an overview of our initial observations, based on data acquired at high altitude and during the first weeks of LAMO. GRaND overview. A detailed description of the GRaND instrument, science objectives and prospective results is given in [1]. At low altitudes, GRaND is sensitive to gamma rays and neutrons produced by cosmogenic nuclear reactions and radioactive decay occurring within the top few decimeters of the surface and on a spatial scale of a few hundred kilometers. From these nuclear emissions, the abundance of several major- and minor-elements, such as Fe, Mg, Si, K, and Th can be determined. Assuming the howardite, eucrite, and diogenite (HED) meteorites are representative of Vesta s crustal composition [2], then GRaND will be able to map the mixing ratios of whole-rock HED end-members, enabling the determination of the relative proportions of basaltic eucrite, cumulate eucrite, and diogenite as well as the proportions of mafic and plagioclase minerals [1,3]. GRaND will also search for compositions not well-represented in the meteorite collection, such as evolved, K-rich lithologies [4], and outcrops of olivine from Vesta s mantle or igneous intrusions in major impact basins [5]. The search for a possible mesosiderite source region is described in [6]. GRaND will globally map the abundance of H, providing constraints on the delivery of H by solar wind and the infall of carbonaceous chondrite materials.

Prettyman, T. H.↗

DOE OSTI2024

Identifying Disadvantaged Communities in the United States: An Energy-Oriented Mapping Tool that Aggregates Environmental and Socioeconomic Burdens

This paper defines a policy-relevant nationwide composite index to identify communities disproportionately impacted by environmental, energy, and climate injustices in the United States. We review existing vulnerability indicators and indices to assess the tradeoffs of different design parameters, including variable selection, geographic unit, dimensionality reduction, weighting, and aggregation methods. From this methodological review, we create the first nationwide, census tract-level index of cumulative burden that includes energy-relevant indicators alongside climate, social, environmental, and economic indicators, and is flexible to the inclusion of additional data sources. We provide a summary of the sources of inputs used to develop a definition for "disadvantaged communities" that can be used to prioritize energy investments. We discuss use-cases for this index including the implementation of the Justice40 Initiative, which calls for 40% of certain federal clean energy benefits to flow to disadvantaged communities in the United States. We use our results to examine historic allocations of federal energy investments and show that communities that we identify as disadvantaged received about 37% fewer funds per capita than non-disadvantaged communities.

cumulative burden↗

DOE OSTI2025

Formation and fate of freshwater on an ice floe in the Central Arctic

The melt of snow and sea ice during the Arctic summer is a significant source of relatively fresh meltwater. The fate of this freshwater, whether in surface melt ponds or thin layers underneath the ice and in leads, impacts atmosphere–ice–ocean interactions and their subsequent coupled evolution. Here, we combine analyses of datasets from the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition (June–July 2020) for a process study on the formation and fate of sea ice freshwater on ice floes in the Central Arctic. Our freshwater budget analyses suggest that a relatively high fraction (58 %) is derived from surface melt. Additionally, the contribution from stored precipitation (snowmelt) outweighs by 5 times the input from in situ summer precipitation (rain). The magnitude and rate of local meltwater production are remarkably similar to those observed on the prior Surface Heat Budget of the Arctic Ocean (SHEBA) campaign, where the cumulative summer freshwater production totaled around 1 m during both. A relatively small fraction (10 %) of freshwater from melt remains in ponds, which is higher on more deformed second-year ice (SYI) compared to first-year ice (FYI) later in the summer. Most meltwater drains laterally and vertically, with vertical drainage enabling storage of freshwater internally in the ice by freshening brine channels. In the upper ocean, freshwater can accumulate in transient meltwater layers on the order of 0.1 to 1 m thick in leads and under the ice. The presence of such layers substantially impacts the coupled system by reducing bottom melt and allowing false bottom growth; reducing heat, nutrient, and gas exchange; and influencing ecosystem productivity. Regardless, the majority fraction of freshwater from melt is inferred to be ultimately incorporated into the upper ocean (75 %) or stored internally in the ice (14 %). Terms such as the annual sea ice freshwater production and meltwater storage in ponds could be used in future work as diagnostics for global climate and process models. For example, the range of values from the CESM2 climate model roughly encapsulate the observed total freshwater production, while storage in melt ponds is underestimated by about 50 %, suggesting pond drainage terms as a key process for investigation.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Metrics for quantifying the efficiency of atmospheric CO 2 reduction by marine carbon dioxide removal (mCDR)

Abstract Marine carbon dioxide removal (mCDR) is gaining interest as a tool to meet global climate goals. Because the response of the ocean–atmosphere system to mCDR takes years to centuries, modeling is required to assess the impact of mCDR on atmospheric CO 2 reduction. Here, we use a coupled ocean–atmosphere model to quantify the atmospheric CO 2 reduction in response to a CDR perturbation. We define two metrics to characterize the atmospheric CO 2 response to both instantaneous ocean alkalinity enhancement (OAE) and direct air capture (DAC): the cumulative additionality ( α ) measures the reduction in atmospheric CO 2 relative to the magnitude of the CDR perturbation, while the relative efficiency ( ϵ ) quantifies the cumulative additionality of mCDR relative to that of DAC. For DAC, α is 100% immediately following CDR deployment, but declines to roughly 50% by 100 years post-deployment as the ocean degasses CO 2 in response to the removal of carbon from the atmosphere. For instantaneous OAE, α is zero initially and reaches a maximum of 40%–90% several years to decades later, depending on regional CO 2 equilibration rates and ocean circulation processes. The global mean ϵ approaches 100% after 40 years, showing that instantaneous OAE is nearly as effective as DAC after several decades. However, there are significant geographic variations, with ϵ approaching 100% most rapidly in the low latitudes while ϵ stays well under 100% for decades to centuries near deep and intermediate water formation sites. These metrics provide a quantitative framework for evaluating sequestration timescales and carbon market valuation that can be applied to any mCDR strategy.

Yamamoto, Kana (ORCID:0009000731519234)↗

NASA NTRS2010

Impact of Atmospheric Infrared Sounder (AIRS) Thermodynamic Profiles on Regional Weather Forecasting

In data sparse regions, remotely-sensed observations can be used to improve analyses and lead to better forecasts. One such source comes from the Atmospheric Infrared Sounder (AIRS), which together with the Advanced Microwave Sounding Unit (AMSU), provides temperature and moisture profiles with accuracy comparable to that of radiosondes. The purpose of this paper is to describe a procedure to assimilate AIRS thermodynamic profile data into a regional configuration of the Advanced Research Weather Research and Forecasting (WRF-ARW) model using its three-dimension variational (3DVAR) analysis component (WRF-Var). Quality indicators are used to select only the highest quality temperature and moisture profiles for assimilation in both clear and partly cloudy regions. Separate error characteristics for land and water profiles are also used in the assimilation process. Assimilation results indicate that AIRS profiles produce an analysis closer to in situ observations than the background field. Forecasts from a 37-day case study period in the winter of 2007 show that AIRS profile data can lead to improvements in 6-h cumulative precipitation forecasts due to instability added in the forecast soundings by the AIRS profiles. Additionally, in a convective heavy rainfall event from February 2007, assimilation of AIRS profiles produces a more unstable boundary layer resulting in enhanced updrafts in the model. These updrafts produce a squall line and precipitation totals that more closely reflect ground-based observations than a no AIRS control forecast. The location of available high-quality AIRS profiles ahead of approaching storm systems is found to be of paramount importance to the amount of impact the observations will have on the resulting forecasts.

Chou, Shih-Hung↗

NASA NTRS2019

Flight Test Methodology for NASA Advanced Inlet Liner on 737MAX-7 Test Bed (Quiet Technology Demonstrator 3)

This paper describes the acoustic flight test results of an advanced nacelle inlet acoustic liner concept designed by NASA Langley, in a campaign called Quiet Technology Demonstrator 3 (QTD3). NASA has been developing multiple acoustic liner concepts to benefit acoustics with multiple-degrees of freedom (MDOF) honeycomb cavities, and lower the excrescence drag. Acoustic and drag performance were assessed at a lab-scale, flow duct level in 2016. Limitations of the lab-scale rig left open-ended questions regarding the in-flight acoustic performance. This led to a joint project to acquire acoustic flyover data with this new liner technology built into full scale inlet hardware containing the NASA MDOF Low Drag Liner. Boeing saw an opportunity to collect the acoustic flyover data on the 737 MAX-7 between certification tests at no impact to the overall program schedule, and successfully executed within the allotted time. The flight test methodology and the test configurations are detailed and the acoustic analysis is summarized in this paper. After the tone and broadband deltas associated with the inlet hardware were separated and evaluated, the result was a significant decrease in cumulative EPNL (Effective Perceived Noise Level).

Wong, Jackie W.↗

NASA NTRS2016

Perceived Noise Analysis for Offset Jets Applied to Commercial Supersonic Aircraft

A systems analysis was performed with experimental jet noise data, engine/aircraft performance codes and aircraft noise prediction codes to assess takeoff noise levels and mission range for conceptual supersonic commercial aircraft. A parametric study was done to identify viable engine cycles that meet NASA's N+2 goals for noise and performance. Model scale data from offset jets were used as input to the aircraft noise prediction code to determine the expected sound levels for the lateral certification point where jet noise dominates over all other noise sources. The noise predictions were used to determine the optimal orientation of the offset nozzles to minimize the noise at the lateral microphone location. An alternative takeoff procedure called "programmed lapse rate" was evaluated for noise reduction benefits. Results show there are two types of engines that provide acceptable mission range performance; one is a conventional mixed-flow turbofan and the other is a three-stream variable-cycle engine. Separate flow offset nozzles reduce the noise directed toward the thicker side of the outer flow stream, but have less benefit as the core nozzle pressure ratio is reduced. At the systems level for a three-engine N+2 aircraft with full throttle takeoff, there is a 1.4 EPNdB margin to Chapter 3 noise regulations predicted for the lateral certification point (assuming jet noise dominates). With a 10% reduction in thrust just after clearing the runway, the margin increases to 5.5 EPNdB. Margins to Chapter 4 and Chapter 14 levels will depend on the cumulative split between the three certification points, but it appears that low specific thrust engines with a 10% reduction in thrust (programmed lapse rate) can come close to meeting Chapter 14 noise levels. Further noise reduction is possible with engine oversizing and derated takeoff, but more detailed mission studies are needed to investigate the range impacts as well as the practical limits for safety and takeoff regulations.

Turbofans↗

NASA NTRS2011

Planetary Protection Considerations in EVA System Design

To better constrain their origin, we have performed systematic studies of the siderophile element distribution in metal from Enstatite achondrites and iron-rich meteorites linked to Enstatite achondrites. Humayun (2010) reported 20 siderophile elements in the metal of Horse Creek, Mt. Egerton and Tucson, three iron meteorites known for their high Si content in their metal. The Horse Creek and Mt. Egerton irons have elemental patterns identical to metallic solids derived from partially molten enstatite chondrites. Tucson has an unusual siderophile element pattern that is reminiscent of IVA irons, except for the most volatile siderophiles with condensation temperatures below that of Cu (Sb, Ge, Sn) which are more depleted. The origin of Tucson metal is likely linked to an impact involving a reduced chondritic body that provided the silicates, and IVA iron. In a related study, van Acken et al. (2010) reported siderophile element abundances in metal and sulfides from aubrites, chondritic inclusions in aubrites, and other enstatite achondrites (including a separate section of Mt. Egerton). They found that aubrite metal was linked to metal in enstatite chondrites by low degree partial melting forming sulfur-rich metallic liquids. A restite origin of aubrites is not consistent with these metal compositions. The link between the metal compositions and cumulate silicates is not simple. The metal must have been incorporated from enstatite chondritic material that was assimilated by the aubrite magma. A manuscript is in preparation (van Acken et al., 2010). In a related study, van Acken et al. (2010, submitted) reported new precise Os isotope ratios and highly siderophile element abundances in Enstatite chondrites, Enstatite achondrites, Rumurutite chondrites to explore the range of nucleosynthetic variation in s-process Os. They observed nucleosynthetic anomalies, deficiencies of s-process Os, in most primitive enstatite chondrites, but showed the Rumurutite chondrites have very little expression of these anomalies. hardware from the human-occupied area may limit (although not likely eliminate) external materials in the human habitat. Definition of design-to requirements is critical to understanding technical feasibility and costs. The definition of Planetary Protection needs in relation to EVA mission and system element development cost impacts should be considered and interpreted in terms of Plausible Protection criteria. Since EVA operations will have the most direct physical interaction with the Martian surface, PP needs should be considered in the terms of mitigating hardware and operations impacts and costs.

Eppler, Dean B.↗

NASA NTRS1990

A new survey of multiring impact basins on Mars

Literature data on Martian multiring impact basins with diameters greater than 500 km are summarized, and evidence is found for eight new such basins. The pattern of changes of basin morphology with increasing basin size suggests three subclasses of multiring basins: (1) multiring basins with diameters up to about 1850 km, which are characterized by the Orientale type concentric structure and cumulative frequency power law slope of -0.75; (2) the Argyre-type basins (with diameters between 1850 and 3600 km, defined by rugged concentric annnuli and a power law slope of nearly -2.0; and (3) the Chryse-type basins (with diameters greater than 3600 km), which exhibit multiple concentric rings and very shallow topographic profiles. Multiring basins are found in all parts of Mars, including the northern lowlands, Tharsis, and surrounding highlands, and are associated with much of the subsequent resurfacing of cratered terrain.

Schultz, Richard A.↗

DOE OSTI2026

Measurement of the galaxy-velocity power spectrum of DESI tracers with the kinematic Sunyaev-Zeldovich effect using DESI DR2 and ACT DR6

Joint analyses of high-resolution CMB temperature maps with galaxy surveys provide a unique way to reconstruct the radial velocity field of the underlying matter distribution via the kinematic Sunyaev-Zeldovich (kSZ) effect. Using data from the Atacama Cosmology Telescope (ACT) DR6 and the Dark Energy Spectroscopic Instrument (DESI) DR2, we present radial velocity reconstructions for luminous red galaxies (LRGs), emission-line galaxies (ELGs), and quasars (QSOs). Leveraging the spectroscopic data, we are able to reliably model the foreground contamination and report a negligible impact on our main observables. We detect the velocity-galaxy cross-correlation at $17.0σ$ for LRGs, and for the first time, at $8.3σ$ for ELGs and $6.8σ$ for QSOs. We further report the first detection of the velocity-velocity correlation using LRGs at $3.1σ$, as well as the highest cumulative detection of the kSZ effect to date at $20.8 σ$. Similarly to previous results, we find a lower amplitude of the kSZ signal compared to our fiducial halo model prediction and electron profile assuming a Battaglia profile. Combining these new observables, we obtain constraints on local-type primordial non-Gaussianity (PNG): $f_{\rm NL}^{\rm loc} = 15.9_{-34.4}^{+34.6}$ at 68% confidence, which represents the tightest constraint to date derived from the velocity field. The measurements presented here already exhibit lower noise on a per-mode basis than the galaxy auto-correlation on the largest scales, $k<0.004~\rm{Mpc^{-1}}$, highlighting the key role these observables will play in the context of future CMB experiments such as the Simons Observatory.

Chaussidon, Edmond [LBL, Berkeley] (ORCID:00000001↗

NASA NTRS1994

Experimental impacts into Teflon targets and LDEF thermal blankets

The Long Duration Exposure Facility (LDEF) exposed approximately 20 sq m of identical thermal protective blankets, predominantly on the Ultra-Heavy Cosmic Ray Experiment (UHCRE). Approximately 700 penetration holes greater than 300 micron in diameter were individually documented, while thousands of smaller penetrations and craters occurred in these blankets. As a result of their 5.7 year exposure and because they pointed into a variety of different directions relative to the orbital motion of the nonspinning LDEF platform, these blankets can reveal important dynamic aspects of the hypervelocity particle environment in near-earth orbit. The blankets were composed of an outer teflon layer (approximately 125 micron thick), followed by a vapor-deposited rear mirror of silver (less than 1000 A thick) that was backed with an organic binder and a thermal protective paint (approximately 50 to 75 micron thick), resulting in a cumulative thickness (T) of approximately 175 to 200 microns for the entire blanket. Many penetrations resulted in highly variable delaminations of the teflon/metal or metal/organic binder interfaces that manifest themselves as 'dark' halos or rings, because of subsequent oxidation of the exposed silver mirror. The variety of these dark albedo features is bewildering, ranging from totally absent, to broad halos, to sharp single or multiple rings. Over the past year experiments were conducted over a wide range of velocities (i.e., 1 to 7 km/s) to address velocity dependent aspects of cratering and penetrations of teflon targets. In addition, experiments were performed with real LDEF thermal blankets to duplicate the LDEF delaminations and to investigate a possible relationship of initial impact conditions on the wide variety of dark halo and ring features.

Hoerz, F.↗

NASA NTRS2013

Design Issues for Using Magnetic Materials in Radiation Environments at Elevated Temperature

One of the challenges of designing motors and alternators for use in nuclear powered space missions is accounting for the effects of radiation. Terrestrial reactor power plants use distance and shielding to minimize radiation damage but space missions must economize volume and mass. Past studies have shown that sufficiently high radiation levels can affect the magnetic response of hard and soft magnetic materials. Theoretical models explaining the radiation-induced degradation have been proposed but not verified. This paper reviews the literature and explains the cumulative effects of temperature, magnetic-load, and radiation-level on the magnetic properties of component materials. Magnetic property degradation is very specific to alloy choice and processing history, since magnetic properties are very much entwined with specific chemistry and microstructural features. However, there is basic theoretical as well as supportive experimental evidence that the negative impact to magnetic properties will be minimal if the bulk temperature of the material is less than fifty percent of the Curie temperature, the radiation flux is low, and the demagnetization field is small. Keywords: Magnets, Permanent Magnets, Power Converters, Nuclear Electric Power Generation, Radiation Tolerance.

Bowman, Cheryl L.↗