Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “conditional shift”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

A self diagnostic system for piezoelectric sensors

A technique for determining the mounting conditions of a piezoelectric accelerometer is presented. This technique electrically stimulates the piezoelectric element in the 'diagnostic' frequency band measuring the electrical frequency response characteristics across a capacitive load impedance. The diagnostic frequency band is tipically much higher than the operating bandwidth of the accelerometer. The resonant frequencies of the accelerometer are included in the diagnostic band. By monitoring the shift in these resonant frequencies, via electrical stimulation techniques, certain diagnostic conditions including mounting conditions can be determined. Experimental data from a compression mode accelerometer is used to demonstrate this technique.

Atherton, William J.↗
DOE OSTI2022

Gross primary production (GPP) and red solar induced fluorescence (SIF) respond differently to light and seasonal environmental conditions in a subalpine conifer forest

The phenology of montane conifer forests is likely to shift in response to climate change and altered seasonal dynamics of light, temperature, and moisture. Solar-induced fluorescence (SIF) is expected to provide substantial improvement for mapping temporal changes in evergreen gross primary production (GPP) over greenness-based remote sensing indices. The utility of SIF to monitor seasonal changes in the phenology of conifer photosynthesis depends on the degree to which GPP and SIF respond in synchrony to key environmental drivers. However, to what extent SIF and GPP become decoupled by responding differently to the combined effects of light and other environmental conditions remains unknown. The goal of this study was to characterize the responses of GPP and SIFred to a suite of environmental drivers at the half-hour time scale and determine how these relationships change across seasons. We analyzed one year of tower-based SIFred and eddy covariance-derived GPP data from a conifer forest at Niwot Ridge, Colorado. We compared the light responses of GPP and SIFred across the year, finding that SIFred increased in response to light earlier in the year than did GPP. The light response of GPP had a positive temperature dependence in spring, and this dependency reversed in summer due to increased evaporative demand, while the light response of SIFred was less temperature dependent. Using artificial neural network ensemble analysis, we found that from spring to summer, SIFred did not exhibit a parallel response to the seasonally dynamic temperature and moisture controls on GPP. In summer SIFred was not correlated with canopy conductance, suggesting that SIF is less sensitive to stomatal control than GPP. Furthermore, our results suggest that, in conifers, photosystems begin to activate in spring prior to when water becomes available for photosynthesis, presenting a challenge for the use of SIF as a phenological indicator in conifer forests.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Performance of a CO 2 sorbent for indoor air cleaning applications: Effects of environmental conditions, sorbent aging, and adsorption of co-occurring formaldehyde

Indoor air cleaning systems that incorporate CO 2 sorbent materials enable HVAC load shifting and efficiency improvements. This study developed a bench-scale experimental system to evaluate the performance of a sorbent under controlled operation conditions. A thermostatic holder containing 3.15 g sorbent was connected to a manifold that delivered CO 2 -enriched air at a known temperature and relative humidity (RH). The air stream was also enriched with 0.8-2.1 ppm formaldehyde. The CO 2 concentration was monitored in real-time upstream and downstream of the sorbent, and integrated formaldehyde samples were collected at different times using DNPH-coated silica cartridges. Sorbent regeneration was carried out by circulating clean air in countercurrent. Almost 200 loading/regeneration cycles were performed in the span of 17 months, from which 104 were carried out at reference test conditions defined by loading with air at 25°C, 38% RH, and 1000 ppm CO 2 , and regenerating with air at 80°C, 3% RH and 400 ppm CO 2 . The working capacity decreased slightly from 43-44 mg CO 2 per g sorbent to 39-40 mg per g over the 17 months. The capacity increased with lower loading temperature (in the range 15-35°C) and higher regeneration temperature, between 40 and 80°C. The CO 2 capacity was not sensitive to the moisture content in the range 6-9 g/m 3 , and decreased slightly when dry air was used. Loading isothermal breakthrough curves were fitted to three simple adsorption models, verifying that pseudo-first-order kinetics appropriately describes the adsorption process. The model predicted that equilibrium capacities decreased with increasing temperature from 15 to 35°C, while adsorption rate constants slightly increased. The formaldehyde adsorption efficiency was 80%-99% in different cycles, corresponding to an average capacity of 86 ± 36 µg/g. Formaldehyde was not quantitatively released during regeneration, but its accumulation on the sorbent did not affect CO 2 adsorption.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS1994

A comprehensive Guyton model analysis of physiologic responses to preadapting the blood volume as a countermeasure to fluid shifts

The Guyton model of fluid, electrolyte, and circulatory regulation is an extensive mathematical model capable of simulating a variety of experimental conditions. It has been modified for use at NASA to simulate head-down tilt, a frequently used analog of weightlessness. Weightlessness causes a headward shift of body fluids that is believed to expand central blood volume, triggering a series of physiologic responses resulting in large losses of body fluids. We used the modified Guyton model to test the hypothesis that preadaptation of the blood volume before weightless exposure could counteract the central volume expansion caused by fluid shifts, and thereby attenuate the circulatory and renal responses that result in body fluid losses. Simulation results show that circulatory preadaptation, by a procedure resembling blood donation immediately before head-down bedrest, is effective in damping the physiologic responses to fluid shifts and reducing body fluid losses. After 10 hours of head-down tilt, preadaptation also produces higher blood volume, extracellular volume, and total body water for 20 to 30 days of bedrest, compared with non-preadapted control. These results indicate that circulatory preadaptation before current Space Shuttle missions may be beneficial for the maintenance of reentry and postflight orthostatic tolerance in astronauts. This paper presents a comprehensive examination of the simulation results pertaining to changes in relevant physiologic variables produced by blood volume reduction before a prolonged head-down tilt. The objectives were to study and develop the countermeasure theoretically, to aid in planning experimental studies of the countermeasure, and to identify potentially disadvantageous physiologic responses that may be caused by the countermeasure.

NASA Center JSC↗
NASA NTRS2005

Methodology for the Elimination of Reflection and System Vibration Effects in Particle Image Velocimetry Data Processing

A methodology to eliminate model reflection and system vibration effects from post processed particle image velocimetry data is presented. Reflection and vibration lead to loss of data, and biased velocity calculations in PIV processing. A series of algorithms were developed to alleviate these problems. Reflections emanating from the model surface caused by the laser light sheet are removed from the PIV images by subtracting an image in which only the reflections are visible from all of the images within a data acquisition set. The result is a set of PIV images where only the seeded particles are apparent. Fiduciary marks painted on the surface of the test model were used as reference points in the images. By locating the centroids of these marks it was possible to shift all of the images to a common reference frame. This image alignment procedure as well as the subtraction of model reflection are performed in a first algorithm. Once the images have been shifted, they are compared with a background image that was recorded under no flow conditions. The second and third algorithms find the coordinates of fiduciary marks in the acquisition set images and the background image and calculate the displacement between these images. The final algorithm shifts all of the images so that fiduciary mark centroids lie in the same location as the background image centroids. This methodology effectively eliminated the effects of vibration so that unbiased data could be used for PIV processing. The PIV data used for this work was generated at the NASA Langley Research Center Quiet Flow Facility. The experiment entailed flow visualization near the flap side edge region of an airfoil model. Commercial PIV software was used for data acquisition and processing. In this paper, the experiment and the PIV acquisition of the data are described. The methodology used to develop the algorithms for reflection and system vibration removal is stated, and the implementation, testing and validation of these algorithms are presented.

Bremmer, David M.↗
DOE OSTI2020

Monitoring Local Electric Fields using Stark Shifts on Napthyl Nitrile-Functionalized Silicon Photoelectrodes

in this paper, we report spectroscopic measurements of the local electric field using vibrational Stark shifts of napthyl nitrile-functionalized silicon under electrochemical working conditions. The C$\equiv$N bond is particularly sensitive to applied electric fields and serves as a good probe for the local electric fields at the silicon–aqueous interface. Here, surface-enhanced Raman spectra (SERS) are collected at a silicon surface using a water immersion lens as a function of the reference potential in a three-terminal potentiostat. In deionized (DI) water and KCl solutions, the nitrile (i.e., C$\equiv$N) stretch downshifts by 4.7 and 8.6 cm –1 , respectively, under an applied potential of –1 V vs Ag/AgCl. Density functional theory (DFT) calculations of the napthyl nitrile complex carried out under various electric fields establish the Stark tuning rate to be 0.5622 cm–1/(MV cm –1 ). Based on this relation, electric fields of –8.4 and –15.2 MV/cm were obtained under negative applied potentials. These measurements report the electric field strength within the double (i.e., Helmholtz) layer, which is responsible for pulling positively charged ions (e.g., H + ) toward the surface in reduction reaction processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Novel Geochemistry Determined from High Pressure, High Temperature Simulation Experiments of Hydraulic Fracture Test Site 2

A standard method in unconventional oil and gas production is the process of hydraulic fracturing followed by a shut-in period, during which the fracture fluid remains pressurized in the reservoir for up to three weeks before production begins. Despite this widely used process, very little is known about what occurs in the reservoir during this shut-in process. In order to properly delineate potential reservoir reactions that may occur during shut-in that would lead to corrosion and scaling events, experiments were conducted in high pressure, high temperature reactors to simulate conditions of the Wolfcamp Formation in the Delaware Basin. Experimental design allowed the assessment of the effect of proppant, microbiology, and time on the mineralogy and fluid chemistry in the reservoir. Results suggest the biggest impact on fluid chemistry and shale mineralogy during shut-in is time. Analyses demonstrate dissolution of the shale material, with maximum dissolved ions occurring after 7 days of the shut-in period. After 21 days, results suggest precipitation occurs. The Delaware Basin is demonstrated to be high in sulfate content, which further increases in the fluid due to dissolution reactions during shut-in. The pressure vessel experiments suggest there was no significant contribution to reactions from microbiology during the shut-in period. Furthermore, early production samples demonstrate a significant selection of the microorganism Caminicella, a genus of which has previously been correlated to corrosion and sulfide production. Results suggest shut-in conditions may provide high sulfate concentrations that could later be utilized by a shifted microbial community to drive potential well infrastructure failure. This is the first study to incorporate microbiology, mineralogy, and fluid chemistry to investigate the fundamental geochemical reactions that occur during shut-in and early phase production of the Delaware Downloaded from http://onepetro.org/URTECONF/proceedings-pdf/21URTC/2-21URTC/D021S032R001/2477425/urtec-2021-5219-ms.pdf/1 by Carol Worster on 28 February 2022 Basin. Results from this study can complement observations from the Hydraulic Fracture Test Site 2 observations

58 GEOSCIENCES↗
DOE OSTI2022

Twenty-first century hydroclimate: A continually changing baseline, with more frequent extremes

Variability in hydroclimate impacts natural and human systems worldwide. In particular, both decadal variability and extreme precipitation events have substantial effects and are anticipated to be strongly influenced by climate change. From a practical perspective, these impacts will be felt relative to the continuously evolving background climate. Removing the underlying forced trend is therefore necessary to assess the relative impacts, but to date, the small size of most climate model ensembles has made it difficult to do this. Here we use an archive of large ensembles run under a high-emissions scenario to determine how decadal “megadrought” and “megapluvial” events—and shorter-term precipitation extremes—will vary relative to that changing baseline. When the trend is retained, mean state changes dominate: In fact, soil moisture changes are so large in some regions that conditions that would be considered a megadrought or pluvial event today are projected to become average. Time-of-emergence calculations suggest that in some regions including Europe and western North America, this shift may have already taken place and could be imminent elsewhere: Emergence of drought/pluvial conditions occurs over 61% of the global land surface (excluding Antarctica) by 2080. Relative to the changing baseline, megadrought/megapluvial risk either will not change or is slightly reduced. However, the increased frequency and intensity of both extreme wet and dry precipitation events will likely present adaptation challenges beyond anything currently experienced. In many regions, resilience against future hazards will require adapting to an ever-changing “normal,” characterized by unprecedented aridification/wetting punctuated by more severe extremes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Increasing large wildfires over the western United States linked to diminishing sea ice in the Arctic

Abstract The compound nature of large wildfires in combination with complex physical and biophysical processes affecting variations in hydroclimate and fuel conditions makes it difficult to directly connect wildfire changes over fire-prone regions like the western United States (U.S.) with anthropogenic climate change. Here we show that increasing large wildfires during autumn over the western U.S. are fueled by more fire-favorable weather associated with declines in Arctic sea ice during preceding months on both interannual and interdecadal time scales. Our analysis (based on observations, climate model sensitivity experiments, and a multi-model ensemble of climate simulations) demonstrates and explains the Arctic-driven teleconnection through regional circulation changes with the poleward-shifted polar jet stream and enhanced fire-favorable surface weather conditions. The fire weather changes driven by declining Arctic sea ice during the past four decades are of similar magnitude to other leading modes of climate variability such as the El Niño-Southern Oscillation that also influence fire weather in the western U.S.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Broadband cross polarization for ultra-wideline magic-angle spinning NMR

Over the past decade, there has been a sustained interest in using frequency-swept (FS) pulses for the efficient acquisition of wideline and ultra-wideline (UW) NMR powder patterns. Such experiments are typically conducted under static conditions, employing both direct- and indirect-excitation methods (i.e., WCPMG and BRAIN-CP/WCPMG, respectively). Recently, Koppe et al. demonstrated that the WCPMG pulse sequence can be used to efficiently acquire wideline and UW NMR spectra with spinning sideband (SSB) manifolds under magic-angle spinning (MAS) conditions, capitalizing on the increased signal-to-noise ratios (SNR) afforded by MAS. To date, there have been only a few instances of broadband cross-polarization (CP) experiments using FS pulses under MAS conditions and no applications to systems exhibiting wideline and/or ultra-wideline powder patterns, despite the clear advantages these experiments could offer. Herein, we demonstrate that FS pulses selectively applied to a single sideband of the S spin can be used for efficient 1 H-S polarization transfer to S = 1/2 nuclides with large anisotropic chemical shift interactions at slow to moderate MAS rates. The Hartmann–Hahn matching conditions in BRAIN-CP/WCPMG-MAS experiments bear similarity to those of standard CP sequences, yet operate over UW frequency ranges and only require low-amplitude RF pulses on the S channel. Crucial to the success of the BRAIN-CP/WCPMG-MAS experiment is careful calibration of the RF amplitude, transmitter offset, and effective frequency sweep of the FS pulse applied to the S spins at a given MAS rate. Thus, by means of numerical simulations and experimental testing, we provide recommendations for the parameterization and setup of BRAIN-CP/WCPMG-MAS experiments for their most efficient use. Results showcasing the capability of the BRAIN-CP/WCPMG-MAS pulse sequence are presented, including applications to 119 Sn, 195 Pt, and 103 Rh NMR.

Kimball, James J. [Florida State University, Talla↗
DOE OSTI2025

Thermal Dynamics and Lithium Plating Detection in High‐Power Li‐Ion Batteries for eVTOL Applications

The rapid electrification of aerial transportation is driving the need for high‐performance Li‐ion batteries that can operate reliably under stringent thermal and safety constraints. The unique mission profile of electric Vertical Take‐off and Landing (eVTOL) aircraft necessitates a focused investigation into the thermal behavior and safety characteristics of these batteries. Here, in this study, operando isothermal microcalorimetry is employed to examine the thermal evolution of Li‐ion batteries under cycling conditions representative of eVTOL operations. These findings reveal that high‐power discharge events—such as those during take‐off and landing—shift the thermal response toward exothermic behavior, in contrast to the typically endothermic response expected under near‐equilibrium cycling conditions. Additionally, the results suggest that advanced electrolyte formulations may help suppress excess heat generation, thereby improving battery safety. Notably, the calorimetric results exhibit a distinct thermal signature associated with lithium plating, offering a potential diagnostic for detecting Li plating during eVTOL operation. Overall, this study demonstrates the utility of isothermal microcalorimetry as a valuable tool for assessing thermal risks in Li‐ion batteries for eVTOL applications, and highlights the importance of targeted design strategies to mitigate safety hazards during high‐power demand scenarios.

Li plating↗
DOE OSTI2020

Biogeochemical Cycling of Redox-Sensitive Elements in Permafrost-Affected Ecosystems

Northern high latitudes are experiencing rapid changes in climate that drive permafrost thaw and shifts in hydrology and soil saturation. These factors regulate redox conditions across permafrost-affected landscapes, potentially altering carbon storage in soils and exacerbating climate change through accelerated decomposition of soil organic matter. Redox conditions impact soil carbon storage directly by influencing rates and pathways of organic matter decomposition, and indirectly by moderating the bioavailability of organic molecules and nutrients. Indeed, the ability of increased plant growth to offset C losses in permafrost regions will be regulated by nutrient availability (e.g., N, P) that varies across redox gradients. The purpose of this review is to examine how redox conditions shape biogeochemical cycling of ecologically important elements (P, N, S, Fe) in permafrost-affected ecosystems. Although carbon cycling in these regions continues to be widely studied, relatively little information is available on the elements that regulate C cycling. We discuss the complex feedbacks between climate change, hydrology, and landscape change that control redox conditions, then examine how these factors regulate biogeochemical cycles. We identify key gaps in our understanding of how changing climate may alter biogeochemical cycles and carbon storage in northern high-latitude ecosystems.

Herndon, Elizabeth↗
DOE OSTI2025

The Remarkable 2024 North Atlantic Mid‐Season Hurricane Lull

Abstract The 2024 North Atlantic (hereafter Atlantic) hurricane season started quickly, with the earliest Category 5 on record (Beryl) and three hurricanes forming through 14 August. Following Ernesto's dissipation on 20 August, the Atlantic hurricane season became extremely quiet during the climatological peak of hurricane season, with only one Category 2 hurricane (Francine) and one tropical storm through 23 September. Several environmental factors likely contributed to this unexpected, prolonged lull. During mid‐to‐late August, subseasonal conditions were broadly favorable for Atlantic hurricanes, but a northward shift in African easterly wave emergence latitude yielded fewer tropical cyclone seed disturbances that also traversed unfavorably cool ocean water. During early‐to‐mid September, subseasonal variability driven by the Madden‐Julian oscillation was less conducive to hurricane activity, with several bouts of increased vertical wind shear across the central Atlantic. Throughout most of the lull, the tropical Atlantic was anomalously dry and subsident, suppressing hurricane formation chances. Plain Language Summary The 2024 North Atlantic (hereafter Atlantic) hurricane season was anticipated to be extremely active, with seasonal forecasts calling for a potentially historic season. Following a busy start including the earliest Category 5 Atlantic hurricane on record (Beryl), the season became very quiet between 20 August–23 September, with only one Category 2 hurricane (Francine) and one tropical storm forming. Following the lull, the Atlantic became extremely busy again, with seven hurricanes forming from 25 September through the end of the season–the most on record for this period. This paper focuses on the surprising lull and attributes it to several different factors, including a late‐August northward shift in African easterly wave tracks (organized thunderstorm complexes spanning thousands of kilometers that often serve as Atlantic hurricane seeds). This northward shift brought these systems out over colder water and into a drier airmass, suppressing their hurricane formation chances. During the first 3 weeks of September, a large‐scale tropical phenomenon known as the Madden‐Julian oscillation, resulted in increased sinking motion, drier mid‐levels and increased vertical wind shear–all of which typically reduce Atlantic hurricane activity. Overall, the lull demonstrates how seed disturbances and other environmental factors can strongly modulate aggregate seasonal tropical cyclone activity. Key Points Following an active start, the 2024 Atlantic hurricane was quiet during the climatological peak with only 1 tropical storm and 1 hurricane The lull was not anticipated by seasonal forecasting agencies, which called for an extremely active 2024 Atlantic hurricane season Factors reducing storm count included a northward shift in African easterly waves, broad‐scale subsidence, and reduced mid‐level moisture

Klotzbach, P J↗
DOE OSTI2023

Ecological divergence of syntopic marine bacterial species is shaped by gene content and expression

Identifying mechanisms by which bacterial species evolve and maintain genomic diversity is particularly challenging for the uncultured lineages that dominate the surface ocean. A longitudinal analysis of bacterial genes, genomes, and transcripts during a coastal phytoplankton bloom revealed two co-occurring, highly related Rhodobacteraceae species from the deeply branching and uncultured NAC11-7 lineage. These have identical 16S rRNA gene amplicon sequences, yet their genome contents assembled from metagenomes and single cells indicate species-level divergence. Moreover, shifts in relative dominance of the species during dynamic bloom conditions over 7 weeks confirmed the syntopic species’ divergent responses to the same microenvironment at the same time. Genes unique to each species and genes shared but divergent in per-cell inventories of mRNAs accounted for 5% of the species’ pangenome content. These analyses uncover physiological and ecological features that differentiate the species, including capacities for organic carbon utilization, attributes of the cell surface, metal requirements, and vitamin biosynthesis. Such insights into the coexistence of highly related and ecologically similar bacterial species in their shared natural habitat are rare.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Evolution of silicate coordination in architected amorphous and crystalline magnesium silicates during carbon mineralization

Advancing durable solutions for carbon storage and removal at the gigaton scale to produce solid carbonates via carbon mineralization requires harnessing earth abundant magnesium silicate resources. Calibrated insights linking the structural and morphological features of earth abundant amorphous and crystalline magnesium silicate phases to their reactivity are essential for scalable deployment but remain underdeveloped. To resolve the influence of silica coordination and mass transfer on carbon mineralization behavior, magnesium silicates bearing amorphous and crystalline phases (AC Mg-silicate) are synthesized. The structural and morphological transitions starting from colloidal precursors to their final synthesized form on heating are delineated using operando ultra small/small/wide angle X-ray scattering (USAXS/SAXS/WAXS) measurements. The evolution of the silicate phases on carbon mineralization of AC Mg-silicate is contrasted with that of highly crystalline Mg-silicate (HC Mg-silicate) when reacted at 200 °C and a CO 2 partial pressure of 20 atm in water and 1 M NaHCO 3 solution in stirred and unstirred environments. These experimental conditions are analogous to those of the water–gas-shift reaction for sustainable recovery of H 2 with inherent carbon mineralization. Enhancement in the extent of carbon mineralization by 13.3–19.5% noted in the presence of NaHCO 3 compared to water in AC and HC Mg-silicate with and without stirring, is attributed to the buffering effect which aids simultaneous silicate dissolution and carbon mineralization. Enhanced extents of carbon mineralization in the presence of NaHCO 3 correspond to the formation of MgSiO 3 and SiO 2 phases from the starting Mg 2 SiO 4 precursors in AC and HC Mg-silicate. Unlocking these silicate transformations during carbon mineralization by harnessing architected Mg-silicate precursors reveals the feasibility of integrating these chemical pathways with sustainable H 2 conversion pathways with inherent carbon mineralization.

Gao, Xun [Cornell Univ., Ithaca, NY (United States↗
DOE OSTI2020

Femtosecond dynamics of cavity modes in ZnSe films on a metal

The ultrafast evolution of cavity modes in a ZnSe film on a metal (Cr, Cu, or Ni) is studied by femtosecond pump/supercontinuum-probe spectroscopy on a time scale of several tens of femtoseconds. Femtosecond excitation of a microcavity in a ZnSe film on a metal substrate leads to a change in the parameters of cavity (Fabry – Perot) modes. The cavity-mode frequency shifts are due to the photoinduced changes in the boundary conditions and the optical thickness of microcavity. (paper)

36 MATERIALS SCIENCE↗
DOE OSTI2023

Direct Numerical Simulation of Transitional and Turbulent Flows Over Multi-Scale Surface Roughness—Part II: The Effect of Roughness on the Performance of a High-Pressure Turbine Blade

Abstract Turbine blades generally present surface roughness introduced in the manufacturing process or caused by in-service degradation, which can have a significant impact on aero-thermal performance. A better understanding of the fundamental physical mechanisms arising from the interaction between the roughness and the turbine flow at engine-relevant conditions can provide insights for the design of blades with improved efficiency and longer operational life. To this end, a high-fidelity numerical framework combining a well-validated solver for direct numerical simulation and a second-order accurate immersed boundary method is employed to predict roughness-induced aero-thermal effects on an LS89 high-pressure turbine (HPT) blade at engine-relevant conditions. Different amplitudes and distributions of surface roughness are investigated and a reference smooth-blade simulation under the same flow conditions is conducted for comparison. Roughness of increasing amplitude progressively shifts the blade suction side boundary layer transition upstream, producing larger values of the turbulent kinetic energy and higher total wake losses. The on-surface data-capturing capabilities of the numerical framework provide direct measurements of the heat flux and the skin friction coefficient, hence offering quantitative information between the surface topology and engineering-relevant performance parameters. This work may provide a benchmark for future numerical studies of turbomachinery flows with roughness.

Engineering↗
DOE OSTI2023

Considering Soil Biota and Symbioses in Forest Management and Ecosystem Restoration

At the 16th Biennial Conference of Science & Management on the Colorado Plateau & Southwest Region on 12–15 September 2022, the authors hosted a symposium on the topic of “Considering host-microbial interactions in ecosystem restoration”. The goal of this symposium was to showcase studies that demonstrate how soil biota and symbioses can be used to promote forest restoration. Two key principles emerging from the symposium and research on this topic include the following: (1) diverse, native mixes of appropriate soil biota can meaningfully shift forests and plantings towards more successful and ecologically appropriate conditions; (2) context is important to consider in determining the appropriateness of plant and microbial pairings, including the similarity of source material and work sites across a variety of factors. To summarize the literature and discussion on this topic, we offer a graphical depiction of several of the factors to consider.

54 ENVIRONMENTAL SCIENCES↗