Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “compliance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Redefining Net-Zero Water for Resilient Aquifers

Groundwater has long been a critical source of potable water, supplying one-third of all global water withdrawals and providing strategic reserves in times of drought (Konikow, 2012; Famiglietti, 2014). The risk in relying on groundwater is that it is often pumped at rates far greater than it can be naturally replenished. With increasing population and a changing climate, the depletion of potable water supplies has become an ever-growing concern (Srinivasan et al., 2012). Recently, the concept of “resilience” has been applied to groundwater, leaving many questions to be explored in terms of what resilience should mean for aquifers (Foster and MacDonald, 2014; Grönwall and Oduro-Kwarteng, 2017). The term is commonly used to indicate resilience to impacts of climate change specifically, but here we consider resilience in the context of more general water insecurity. Relatedly, the concept of “sustainable yield” has emerged in an attempt to determine a metric that can ensure the long-term resilience of groundwater systems, but the definition is fraught with inherent uncertainties and its quantification poses challenges (Rudestam and Langridge, 2014; Grönwall and Oduro-Kwarteng, 2017). At the heart of these concepts is a focus on sustainable management of aquifers. A sustainable approach to managing groundwater resources usually involves balancing long-term abstraction with the long-term recharge taking into account the needs for environmental flows and implementing drought-preparedness measures (Robins et al. 2006; Foster and MacDonald, 2014). At a high level, a sustainable balance of groundwater abstraction versus aquifer recharge may be considered “Net Zero” (NZ) or “Net Positive” (NP) in cases where recharge is equal to or in excess of abstraction, respectively. However, NZ/NP water management programs that address these concerns have varied definitions of compliance, which include considerations for the application at hand (ILFI, 2020; USGBC, 2020). Locations with high risk of low or poor water supply may be particularly interested in pursuing NZ/NP water. The AQUEDUCT Water Risk Atlas (World Resources Institute, 2019) indicates long-term availability, providing risk levels for quantity and quality of water at specific locations across the globe, for existing and predicted future conditions. This paper follows the U.S. Department of Energy (DOE) Federal Energy Management Program (FEMP) NZ water definition adopted by the U.S. Army for use at their installations, including Army Reserve Centers (ARCs). This definition also relates to the U.S. Army’s current focus on water resilience, which includes short-term and long-term availability of water resources.

net zero water, HUC12, Saipan, American Samoa, Mau↗
DOE OSTI2026

California Trees Seasonally Use Augmented Water Sources: Water Isotope Tracking in a Groundwater‐Dependent Ecosystem

Sustainable groundwater management must account for the needs of groundwater dependent ecosystems. To understand the relationship of ecosystems and seasonal water use, we studied the stable isotope composition (δ 18 O and δ 2 H) of water in streamside trees in a semi-arid streamside environment (Livermore, California, USA). We sampled seven trees at two sites every other month from April 2024 through April 2025 for tree xylem stable water isotope signatures. These data were compared to potential source waters: precipitation, imported surface water, soil water and regional groundwaters. Large daily precipitation events were found to be isotopically similar to regional groundwater and were thus treated as one water source. A Bayesian mixing model using stable water isotopes was used to determine the ratios of these three potential source waters (small daily precipitation events, groundwater/large daily precipitation events and imported water) present in tree xylem water. On average, tree water sources include 32% imported water (SD = 9%), 35% small daily precipitation events (SD = 10%) and 33% groundwater (SD = 3%), with significant seasonal variation (t summer-winter = 30.8, p < 0.01), particularly drawing more imported water (more than 55%) in the summer. While small daily precipitation events contribute only 10% of the total precipitation in our dataset, it represents a third of water used by trees. In addition, while these ecosystems are designated as groundwater dependent ecosystems, the trees use approximately one third imported water and even more during dry summer months. This approach provides water managers with a practical tool for quantifying ecosystem water needs, supporting data-driven decisions and regulatory compliance. While California's Sustainable Groundwater Management Act emphasizes supporting groundwater dependent ecosystems, it allows flexibility in demonstrating benefits. In conclusion, our methodology provides a way to document that management actions (such as managed aquifer recharge with imported water) deliver measurable co-benefits to GDEs.

Geosciences↗
DOE OSTI2020

Toward Validation of Toxicological Interpretation of Diffusive Gradients in Thin Films in Marine Waters Impacted by Copper

Determination of Mytilus galloprovincialis larvae median effect concentration (EC50), of Cu in coastal marine waters by diffusive gradient in thin-films (DGT), has been shown to effectively reduce the need to consider dissolved organic carbon (DOC) concentration and quality. West coast marine and estuarine organisms’ chronic toxicity test protocol was used to validate previously modelled protective effects, afforded to highly sensitive marine larvae by ligand competition, in five diverse site waters. The results demonstrate significant narrowing of toxicological endpoints, where EC50s ranged from 3.74 – 6.67 µg/L as CDGT Cu versus 8.76 – 26.8 µg/L as CuDISS over a DOC range of 0.74 – 3.11 mg/L. Additionally, DOC quality (characterized by fluorescence excitation and emission matrices) indicates that the heterogeneity of competing Cu binding ligands, in common marine waters, minimizes the need for class determinations toward explaining the degree of protection, when assumptions in criterion maximum concentration (CMC) setting are conservative. A CDGT Cu EC50 of 3.7 µg/L, and corresponding CMC CDGT Cu of 1.8 µg/L, for universal application by regulatory compliance-monitoring programs, are proposed as a superior approach toward both integration of dynamic water quality over effective exposure periods and quantification of biologically-relevant trace Cu speciation and are demonstrated by in situ data.

Diffusive Gradients in Thin-films, copper, seawate↗
DOE OSTI2021

Multidecadal Biological Monitoring and Abatement Program assessing human impacts on aquatic ecosystems within the Oak Ridge Reservation in eastern Tennessee, USA

Human activities can be powerful drivers of ecosystem change within catchments. While most long-term catchment studies have been conducted at pristine sites, such studies are less common from sites more impacted by human activity. The Oak Ridge National Laboratory's Biological Monitoring and Abatement Program (BMAP) was developed in the mid-1980s to (1) assess compliance with environmental regulations, (2) identify causes of adverse ecological impacts, (3) provide data for human and ecological risk assessments, and (4) evaluate the effectiveness of remedial actions taken to mitigate the impacts of contaminants in soils, groundwater, and surface water by documenting ecological recovery on the Oak Ridge Reservation (ORR), a federally owned 33,476-acre site in eastern Tennessee, USA, managed by the U.S. Department of Energy. The ORR is composed of multiple watersheds containing many small to mid-size streams. BMAP uses an integrated approach for determining stream health; its databases include long-term seasonal records of contaminant concentrations in water and biota, data from aquatic toxicity testing, and surveys of macroinvertebrate and fish assemblages from impacted and reference streams. These long-term data provide valuable records of degradation and recovery in catchment ecosystems. Our objective in this work is to describe our study system and data series in order to increase awareness of the availability of these long-term data to the catchment science community.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Assessing the efficiency implications of renewable fuel policy design in the United States

Abstract Obligated parties have chosen to comply with the Renewable Fuel Standard (RFS) by increasing the blending of biomass‐based biodiesel beyond originally targeted levels rather than increasing blending/consumption of ethanol to targeted levels that would have required pricing higher blends of ethanol (E85) at or below an energy‐equivalent level to E10. This paper develops a welfare‐economic framework to analyze the extent to which the nested design and the accompanying cellulosic waiver credit and biodiesel tax credit contributed to a compliance strategy by blenders that favored blending of biodiesel instead of inducing consumption of E85, and its implications for social welfare.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Gender gap in perspectives of the impacts of degradation and restoration on ecosystem services in Ethiopia

Abstract The importance of land restoration has garnered increasing attention on the global stage through large‐scale initiatives such as the Bonn Challenge. However, policies and strategies are often gender‐blind and designed in compliance with entrenched social hierarchies, exacerbating pre‐existing social inequalities that affect restoration initiatives. The challenge of developing gender‐responsive policies and initiatives is accentuated by a persistent lack of sex‐disaggregated data concerning men's and women's differing perceptions and experiences. This study aims to help fill this gap by capturing the differences in men and women's perceptions of ecosystem services before and after restoration interventions in Ethiopia. Towards that end, in October 2021, we collected data from fifty‐nine (59) paired husband‐wife households and six gender‐segregated focus group discussions in two regions of Ethiopia: Amhara and Southern Nations, and Nationalities and Peoples (SNNP). Kendall's concordance analysis established a strong degree of disagreement between men's and women's ratings of restoration outcomes for most indicators. Men attributed degradation to landscape conditions and natural forces, while women considered the lack of appropriate restoration strategies as a precursor for accelerated degradation. The study also reveals that men tended to benefit more than women from enhanced ecosystem services post‐restoration, with increased labour and land management burdens often falling on the shoulders of women. Based on these findings, we argue that including men's and women's perspectives from the earliest planning phases of restoration initiatives is essential to ensure greater equity in benefit‐sharing, mitigate trade‐offs for women, and build more nuanced, just and successful approaches to restoration.

Mponela, Powell↗
DOE OSTI2022

A Study on Recycled Polymers Recovered from Multilayer Plastic Packaging Films by Solvent–Targeted Recovery and Precipitation (STRAP)

Multilayer plastic film use increased in multiple packaging applications due to its versatility and overall increased performance over monolayer structures. However, the performance gains from multiple layers also make recycling difficult because they contain multiple polymers that can be immiscible and burdensome to traditional mechanical recycling operations. A possible solution is the solvent-targeted recovery and precipitation (STRAP) process, but the effect on the retrieved polymer is still unknown. Here, the STRAP process is applied to two different multilayer films and samples of recovered polymers are evaluated for physical, molecular, and thermal properties. Changes in the molecular weight are not significant, but differences in thermal properties are reported along with the coprecipitation of different polymers. Solvent retention in the polymer matrix from STRAP reduced the glass transition temperature of samples, but enhanced drying recovered it. Heavy metals, such as Cd, Cr, and Pb are not detected, indicating regulatory compliance for different applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Lagrangian–Eulerian multidensity topology optimization with the material point method

Abstract In this paper, a hybrid Lagrangian–Eulerian topology optimization (LETO) method is proposed to solve the elastic force equilibrium with the Material Point Method (MPM). LETO transfers density information from freely movable Lagrangian carrier particles to a fixed set of Eulerian quadrature points. This transfer is based on a smooth radial kernel involved in the compliance objective to avoid the artificial checkerboard pattern. The quadrature points act as MPM particles embedded in a lower‐resolution grid and enable a subcell multidensity resolution of intricate structures with a reduced computational cost. A quadrature‐level connectivity graph‐based method is adopted to avoid the artificial checkerboard issues commonly existing in multiresolution topology optimization methods. Numerical experiments are provided to demonstrate the efficacy of the proposed approach.

Li, Yue↗
DOE OSTI2023

Stress‐constrained topology optimization of structures subjected to nonproportional loading

Abstract This work considers the topology optimization of hyperelastic structures for maximum stiffness (minimum compliance) subject to constraints on their volume and maximum stress. In contrast to almost all previous works, we subject the structures to nonproportional loading, wherein the maximum stress does not necessarily occur at the final load step. As such, the stress is constrained at each load step. The augmented Lagrangian method is used to formulate the optimization problem with its many constraints. In numerical examples, we investigate different load trajectories for the same terminal load and compare the optimized designs and their performances. The results show the importance of considering the entire load trajectory as the load history significantly influences the optimized designs.

42 ENGINEERING↗
DOE OSTI2023

A robust interface finite element formulation for modeling brittle material failure problems

Abstract Failure of many brittle materials and structures can be modeled using interface‐oriented finite elements combined with intrinsic cohesive zone models. The discontinuous Galerkin (DG) finite element method provides an innovative framework for modeling brittle crack propagation with zero‐thickness interface elements, which can accommodate extrinsic cohesive laws to avoid the artificial compliance required in intrinsic cohesive models. However, robust formulations and implementations of DG methods are critical in alleviating the well‐known convergence issues for both crack nucleation and propagation with reduced instability. This paper presents a robust interface element formulation by modifying the incomplete interior penalty Galerkin (IIPG) method, which successfully avoids the initial element interface penetration across elements that occurs prior to crack nucleation, and thereby greatly reduces the instability issue as cracks open. We further verified and validated our implementation by using a bar tension test and a beam fracturing benchmark. The robustness of our proposed interface element method was demonstrated by a micromechanics fiber/matrix debonding problem with 64 fibers embedded in a bulk matrix.

Liu, Ruijie↗
DOE OSTI2021

Predicting Low Toxicity and Scalable Solvent Systems for High–Speed Roll–to–Roll Perovskite Manufacturing

Printed lead-based perovskite photovoltaics (PV) have gained interest due to their potential to be manufactured with scalable roll-to-roll techniques. In industrial scale-up, toxicity of inks can constrain roll-to-roll manufacturing due to the added cost of managing toxic effluents. Due to solvent toxicity, few perovskite solution chemistries in published works are scalable to gigawatt production capacity at low cost. Herein, it is shown that for scalable PV production, the use of aprotic polar solvents should be avoided due to their overall toxicity. Compliance with worldwide worker safety regulations for solvent exposure limits could require additional air handling requirements for some solvents, which in turn would affect cost-effectiveness. It is shown that costs associated with handling of hazardous substances can be significant and estimate an added cost of ¢3.7/W for dimethylformamide (DMF)-based inks. To solve this problem, a new perovskite ink solvent system is developed that is composed entirely of ether and alcohol, which has an effective exposure limit 14× higher than DMF, making it suitable for industrial coating processes. Here, it is shown that the new ink solvent system is capable of fabricating high-efficiency perovskite solar cells processed in 1 min on a standard roll-to-roll system.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Challenges for monitoring and data analytics in a leadership public data repository

The availability and disposition of data has assumed increasing importance in large-scale computational science. Data repositories are evolving to meet new classes of requirements: compliance with government access guidelines, support for reproducibility of experimental results, and long-term availability of data products. The Constellation public data repository at the Oak Ridge Leadership Computing Facility faces these issues while being situated in one of the most productive data centers in the world. While monitoring and operational data analysis are ingrained in the operation of the OLCF’s large-scale high performance computing platforms, data repositories do not have this history of support. Problems faced by Constellation range from data size (over 7 petabytes in current holdings) to analytic complexity (detailed curation is both absolutely necessary for many data sets and absolutely impossible for humans to accomplish in any practical manner) to deployment environment (OLCF storage resources are oriented toward the needs of the compute platforms). In this paper we describe some of the challenges for collecting monitoring and analytic data from a leadership public data repository. We also discuss various strategies we are pursuing in order to address these challenges, from manual data collection to plans for introducing machine learning-based curatorial techniques.

Widener, Patrick [ORNL] (ORCID:0000000258820816)↗
DOE OSTI2022

Parton distribution function for topological charge at one loop

We present results for the gg-part of the one-loop corrections to the recently introduced “topological charge” GPD F~(x, q 2 ). In particular, we give expression for its evolution kernel. To enforce strict compliance with the gauge invariance requirements, we have used on-shell states for external gluons, and have obtained identical results both in Feynman and light-cone gauges. No “zero mode” δ(x) terms were found for the twist-4 gluon GPD F~(x, q 2 ).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Causality, unitarity, and the weak gravity conjecture

We consider the shift of charge-to-mass ratio for extremal black holes in the context of effective field theory, motivated by the Weak Gravity Conjecture. We constrain extremality corrections in different regimes subject to unitarity and causality constraints. In the asymptotic IR, we demonstrate that for any supersymmetric theory in flat space, and for all minimally coupled theories, logarithmic running at one loop pushes the Wilson coefficient of certain four-derivative operators to be larger at lower energies, guaranteeing the existence of sufficiently large black holes with Q > M. We identify two exceptional cases of nonsupersymmetric theories involving large numbers of light states and Planck-scale nonminimal couplings, in which the sign of the running is reversed, leading to black holes with negative corrections to Q/M in the deep IR, but argue that these do not rule out extremal black holes as the requisite charged states for the WGC. We separately show that causality and unitarity imply that the leading threshold corrections to the effective action from integrating out massive states, in any weakly coupled theory, can be written as a sum of squares and is manifestly positive for black hole backgrounds. Quite beautifully, the shift in the extremal Q/M ratio is directly proportional to the shift in the on-shell action, guaranteeing that these threshold corrections push Q > M in compliance with the WGC. Our results apply for black holes with or without dilatonic coupling and charged under any number of U(1)s.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

One-loop structure of parton distribution for the gluon condensate and “zero modes”

We present results for one-loop corrections to the recently introduced “gluon condensate” PDF F(x). In particular, we give expression for the gg-part of its evolution kernel. To enforce strict compliance with the gauge invariance requirements, we have used on-shell states for external gluons, and have obtained identical results both in Feynman and light-cone gauges. No “zero mode” δ(x) terms were found for the twist-4 gluon PDF F(x). However a q 2 δ(x) term was found for the ξ = 0 GPD F(x, q 2 ) at nonzero momentum transfer q. Overall, our results do not agree with the original attempt of one-loop calculations of F(x) for gluon states, which sets alarm warning for calculations that use matrix elements with virtual external gluons and for lattice renormalization procedures based on their results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

A simple introduction to the SiMPL method for density-based topology optimization

We introduce a novel method for solving density-based topology optimization problems: Sigmoidal Mirror descent with a Projected Latent variable (SiMPL). The SiMPL method (pronounced as “the simple method”) optimizes a design using only first-order derivative information of the objective function. The bound constraints on the density field are enforced with the help of the (negative) Fermi–Dirac entropy, which is also used to define a non-symmetric distance function called a Bregman divergence on the set of admissible designs. This Bregman divergence leads to a simple update rule that is further simplified with the help of a so-called latent variable. Because the SiMPL method involves discretizing the latent variable, it produces a sequence of pointwise-feasible iterates, even when high-order finite elements are used in the discretization. Numerical experiments demonstrate that the method outperforms other popular first-order optimization algorithms. In conclusion, to outline the general applicability of the technique, we include examples with (self-load) compliance minimization and compliant mechanism optimization problems.

Calculus of Variations and Optimization↗
DOE OSTI2021

A Time-Dependent Directional Damage Theory for Brittle Rocks Considering the Kinetics of Microcrack Growth

In this work, a novel microcrack damage theory for describing the time-dependent behavior of brittle rocks is proposed. Instead of using scalar or tensorial variables to approximate the effect of microcracks, the concept of directional damage is introduced by upscaling the directional distribution density of microcracks through the noninteracting homogenization scheme. The contribution of an individual crack on global strain is first derived from the crack-opening displacements including sliding, closure, and dilation. The model is then cast in the free energy form, and the range of parameters ensuring compliance with the second law of thermodynamics is derived rigorously. Considering that the subcritical propagation of microcracks is the dominant mechanism behind the time-dependent deformation and failure of brittle rocks, the driving force for directional damage is defined as the corresponding energy release rate, and the effect of time is introduced through a damage evolution law inspired from the kinetics of subcritical crack growth. The model is applied to simulate the behavior of basalt rock under various loading conditions. In addition to predicting the stress–strain–time response, the model offers enhanced resolution in representing the anisotropic characteristics of microcrack-induced damage in brittle rocks and their time-dependent evolutions.

58 GEOSCIENCES↗
DOE OSTI2024

The Influence of Residual Stress on Fatigue Crack Growth Rates in Stainless Steel Processed by Different Additive Manufacturing Methods

The properties and microstructure of Type 304L stainless steel produced by two additive manufacturing (AM) methods—directed energy deposition (DED) and powder bed fusion (PBF)—are evaluated and compared. Localized heating and steep temperature gradients of AM processes lead to significant residual stress and distinctive microstructures, which may be process-specific and influence mechanical behavior. Test data show that materials produced by DED and PDF have small differences in tensile strengths but clear differences in residual stress and microstructural features. Measured fatigue crack growth rates (FCGRs) for cracks propagating parallel to and perpendicular to the build directions differ between the two AM materials. To separate the influences of residual stress and microstructure, K-control test procedures with decreasing and constant stress intensity factor ranges are used to measure FCGRs in the near-threshold regime (crack growth rates ≤ 1 × 10 −8 m/cycle). Residual stress is quantified by the residual stress intensity factor, K res , measured by the online crack compliance method. Correcting the FCGR data for differences in K res brings results for specimens of the two AM materials into agreement with each other and with results for wrought specimens, when the latter are corrected for crack closure. Differences in microstructure and tensile strength have an insignificant influence on FCGRs in these tests.

additive manufacturing↗