Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cloud liquid water content”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Temporal variations of the microwave signatures of sea ice during the late spring and early summer near Mould Bay, NWT

It has been shown that passive microwave imagery obtained from satellite-borne sensors provides an important basis for the study of the polar regions. Because of the optical thinness of high-latitude clouds at microwave frequencies, radiometry can provide all-weather all-time observing capability. However, in order to clarify observational uncertainties and investigate the information content of passive microwave imagery, detailed ground-based observations are needed. Multifrequency data are also required to utilize the strong spectral dependence of both the dielectric properties of liquid water and volume scattering. The present investigation has the aim to provide information of the considered type for the calibration and interpretation of satellite observations of the Arctic during the summer season. Attention is given to instruments and calibration, the field program and the state of the ice cover, and the results.

Grenfell, T. C.↗
NASA NTRS2016

Update on the NASA Glenn PSL Ice Crystal Cloud Characterization (2016)

NASA Glenn's Propulsion Systems Laboratory (PSL) is an altitude engine research test facility capable of producing ice-crystal and supercooled liquid clouds. The cloud characterization parameter space is fairly large and complex, but the phase of the cloud seems primarily governed by wet bulb temperature. The presentation will discuss some of the issues uncovered through four cloud characterization efforts to date, as well as some of instrumentation that has been used to characterize cloud parameters including cloud uniformity, bulk total water content, median volumetric diameter and max-diameter, percent freeze-out, relative humidity, and an update on the NASA Glenn PSL Ice Crystal Cloud Characterization (2016).

Calibration↗
NASA NTRSDate not supplied

Surface Radiation Budget (SRB) Release 2.5 Longwave cloud props 3 hourly Data in Native Format (SRB_REL2.5_LW_CLDPROPS_3HRLY)

The Surface Radiation Budget (SRB) data set contain 47 surface and cloud properties including cloud fraction, cloud visible optical depth, cloud top temperature, cloud top pressure, cloud base pressure, and cloud water and ice content for each of 5 cloud types and in total. In addition to these cloud properties, the parameters also include surface pressure, total column ozone, day/night flag, and precipitable water. All perameters were measured at three hourly intervals for each day for the entire globe between 07/01/1983 and 06/30/2005 and serve as inputs to the Global Energy and Water-Cycle Experiment (GEWEX) longwave algorithm (GLW). [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2005-06-30] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=1 degree; Longitude_Resolution=Ranges from 1 degree (tropics and subtropics) to 120 degrees (the poles).; Temporal_Resolution=3 hourly; Temporal_Resolution_Range=3 hourly].

CLOUD TOP TEMPERATURE↗
NASA NTRSDate not supplied

A Preliminary Study of Inter-Facility LWC Differences in Appendix C and Supercooled Large Droplet Conditions due to Calibration Instruments

The simulation of clouds containing Supercooled Large Droplets has received increasing attention due to the introduction of Appendix O and future associated requirements for means of compliance. Supercooled Large Droplet conditions can cover four orders of magnitude in drop sizes, imposing a larger instrument measurement challenge than for Appendix C conditions. Wind tunnel facilities have adopted different instrumentation for liquid water content measurement, with fundamentally different principles of operation. In order to explore the comparability of the different instruments used for Appendix C and SLD measurement, and its impact on confidence in measurements used for means of compliance, a project was established to conduct a series of dedicated tests at three wind tunnel facilities. To date, liquid water content measurements have been completed using a Multi-Element sensor as the common instrument at two of the facilities. The data have provided preliminary information suggesting that substantial inter-facility differences likely exist in liquid water content estimates in Supercooled Large Droplet conditions that appear to be largely attributable to the choice of calibration instruments. These results are dependent on the assumption that the Multi-Element probe would produce equivalent measurements at the two facilities if the liquid water content were the same, regardless of other environmental differences that may exist between the two facilities. Planned further testing with other liquid water content measurement techniques may provide further information to confirm or refute the results of this study.

aircraft icing↗
NASA NTRS2001

Resolution Enhancement of Spaceborne Radiometer Images

Our progress over the last year has been along several dimensions: 1. Exploration and understanding of Earth Observatory System (EOS) mission with available data from NASA. 2. Comprehensive review of state of the art techniques and uncovering of limitations to be investigated (e.g. computational, algorithmic ...). and 3. Preliminary development of resolution enhancement algorithms. With the advent of well-collaborated satellite microwave radiometers, it is now possible to obtain long time series of geophysical parameters that are important for studying the global hydrologic cycle and earth radiation budget. Over the world's ocean, these radiometers simultaneously measure profiles of air temperature and the three phases of atmospheric water (vapor, liquid, and ice). In addition, surface parameters such as the near surface wind speed, the sea surface temperature, and the sea ice type and concentration can be retrieved. The special sensor microwaves imager SSM/I has wide application in atmospheric remote sensing over the ocean and provide essential inputs to numerical weather-prediction models. SSM/I data has also been used for land and ice studies, including snow cover classification measurements of soil and plant moisture contents, atmospheric moisture over land, land surface temperature and mapping polar ice. The brightness temperature observed by SSM/I is function of the effective brightness temperature of the earth's surface and the emission scattering and attenuation of the atmosphere. Advanced Microwave Scanning Radiometer (AMSR) is a new instrument that will measure the earth radiation over the spectral range from 7 to 90 GHz. Over the world's ocean, it will be possible to retrieve the four important geographical parameters SST, wind speed, vertically integrated water vapor, vertically integrated cloud liquid water L.

Krim, Hamid↗
NASA NTRS1986

Rainfall over oceans inferred from Nimbus 7 SMMR - Application to 1982-83 El Nino

Nimbus 7 Scanning Multichannel Microwave Radiometer (SMMR) measurements at five frequencies in the region 6.6 to 37 GHz, at a resolution of 155 km, are analyzed to infer precipitation over the global oceans. The microwave data show, on this spatial scale, that the combined liquid water in the clouds and rain increases the brightness temperature almost linearly with frequency in the 6.6-18-GHz region, while at 37 GHz such a simple relationship is not noticed. Further, as the atmospheric water-vapor absorption and the effects of scattering by precipitation particles are relatively weak at 6.6 and 10.7 GHz, a technique to remotely sense the liquid water content in the atmosphere is developed based on the brightness measurements at these two frequencies. Seasonal mean patterns of liquid water content in the atmosphere derived from SMMR over global oceans relate closely to climatological patterns of precipitation. Based on this, an empirical relationship is derived to estimate precipitation over the global oceans, with an accuracy of about + or - 30 percent, on a seasonal basis from satellite measurements made during the three years (1979-81) before the recent El Nino event. The deviations from these three-year means, in the precipitation, produced by the 1982-83 el Nino event are then deduced from the SMMR measurements. In the Pacific, the precipitation over the ITCZ in the north, the South Pacific Convergence Zone, and the oceans around Indonesia is drastically reduced. At the same time a substantial increase in precipitation is observed over the normally dry central and eastern equatorial Pacific Ocean.

Prabhakara, C.↗
NASA NTRS1990

Development of a phase Doppler based probe for icing cloud droplet characterization

The development and evaluation of a compact optical fiber probe (OFP) for airborne and wind tunnel icing cloud characterizations is described. This probe was based upon the proven phase Doppler technique for measuring the size and velocity of spherical drops. Direct comparisons of the size distributions from the standard PDPA with the OFP were used to confirm the reliability of the probe. After some improvements in the fiber coupling efficiency, the number density and liquid water content data agreed to within 15 percent.

Rudoff, R. C.↗
NASA NTRS2016

Observations of Stratiform Lightning Flashes and Their Microphysical and Kinematic Environments

During the Midlatitude Continental Convective Clouds Experiment (MC3E), combined observations of clouds and precipitation were made from airborne and ground-based in situ and remote sensing platforms. These observations were coordinated for multiple mesoscale convective systems (MCSs) that passed over the MC3E domain in northern Oklahoma. Notably, during a storm on 20 May 2011 in situ and remote sensing airborne observations were made near the times and locations of stratiform positive cloud-to-ground (+CG) lightning flashes. These +CGs resulted from extremely large stratiform lightning flashes that were hundreds of km in length and lasted several seconds. This dataset provides an unprecedented look at kinematic and microphysical environments in the vicinity of large, powerful, and long-lived stratiform lightning flashes. We will use this dataset to understand the influence of low liquid water contents (LWCs) in the electrical charging of MCS stratiform regions.

Lightning↗
NASA NTRS2017

Observations of Stratiform Lightning Flashes and Their Microphysical and Kinematic Environments

During the Midlatitude Continental Convective Clouds Experiment (MC3E), combined observations of clouds and precipitation were made from airborne and ground-based in situ and remote sensing platforms. These observations were coordinated for multiple mesoscale convective systems (MCSs) that passed over the MC3E domain in northern Oklahoma. Notably, during a storm on 20 May 2011 in situ and remote sensing airborne observations were made near the times and locations of stratiform positive cloud-to-ground (+CG) lightning flashes. These +CGs resulted from extremely large stratiform lightning flashes that were hundreds of km in length and lasted several seconds. This dataset provides an unprecedented look at kinematic and microphysical environments in the vicinity of large, powerful, and long-lived stratiform lightning flashes. We will use this dataset to understand the influence of low liquid water contents (LWCs) in the electrical charging of MCS stratiform regions.

Lightning↗
NASA NTRS1994

Physical Retrievals of Over-Ocean Rain Rate from Multichannel Microwave Imagery: Theoretical Characteristics of Normalized Polarization and Scattering Indices - Part 1

Microwave rain rate retrieval algorithms have most often been formulated in terms of the raw brightness temperatures observed by one or more channels of a satellite radiometer. Taken individually, single-channel brightness temperatures generally represent a near-arbitrary combination of positive contributions due to liquid water emission and negative contributions due to scattering by ice and/or visibility of the radiometrically cold ocean surface. Unfortunately, for a given rain rate, emission by liquid water below the freezing level and scattering by ice particles above the freezing level are rather loosely coupled in both a physical and statistical sense. Furthermore, microwave brightness temperatures may vary significantly (approx. 30-70 K) in response to geophysical parameters other than liquid water and precipitation. Because of these complications, physical algorithms which attempt to directly invert observed brightness temperatures have typically relied on the iterative adjustment of detailed micro-physical profiles or cloud models, guided by explicit forward microwave radiative transfer calculations. In support of an effort to develop a significantly simpler and more efficient inversion-type rain rate algorithm, the physical information content of two linear transformations of single-frequency, dual-polarization brightness temperatures is studied: the normalized polarization difference P of Petty and Katsaros (1990, 1992), which is intended as a measure of footprint-averaged rain cloud transmittance for a given frequency; and a scattering index S (similar to the polarization corrected temperature of Spencer et al.,1989) which is sensitive almost exclusively to ice. A reverse Monte Carlo radiative transfer model is used to elucidate the qualitative response of these physically distinct single-frequency indices to idealized 3-dimensional rain clouds and to demonstrate their advantages over raw brightness temperatures both as stand-alone indices of precipitation activity and as primary variables in physical, multichannel rain rate retrieval schemes. As a byproduct of the present analysis, it is shown that conventional plane-parallel analyses of the well-known foot-print-filling problem for emission-based algorithms may in some cases give seriously misleading results.

Petty, G. W.↗
DOE OSTI2021

Improving GCM Representation of Convective Cloud Microphysics by Using ARM Raman Lidar and Cloud Radar Observations

The overall objective of this Department of Energy (DOE) Atmospheric System Research (ASR) funded project is to improve the representation of convective cloud microphysics in global climate models (GCMs) and check it by comparing the model simulations with observations. We have derived the cloud ice water content by synthesizing ARM Raman lidar (RL) and cloud radar observations at the Atmospheric Radiation Measurement (ARM) sites. Noting that the simulated anvil clouds in terms of their macro- and micro-physical properties are sensitive to the parameterization of convective microphysical processes, observed ice water content in anvil clouds provides a useful constraint on these parameterizations. We have improved the convective microphysics parameterization scheme by (1) considering sedimentation for cloud ice crystals that do not fall in the original scheme, (2) applying a new terminal velocity parameterization that depends on the environmental conditions for convective snow, (3) adding a new hydrometeor category, “rimed ice,” to the original four-class (cloud liquid, cloud ice, rain, and snow) scheme, and (4) allowing convective clouds to detrain snow particles into stratiform clouds. We have examined the impact of improved convective cloud microphysics parameterization on the simulated global climate from GCM simulations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Climatology of the Vertical Profiles of Polarimetric Radar Variables and Retrieved Microphysical Parameters in Continental/Tropical MCSs and Landfalling Hurricanes

Most existing cloud models tend to overestimate the size of cloud ice particles and underestimate their concentration. This emphasizes the need to provide a reliable observational reference to optimize cloud model performance, particularly in areas of high concentration of ice at high altitudes. The dual-polarization radars give the community a unique opportunity to quantify cloud ice with a good accuracy using polarimetric radar retrievals. Here, in this study, we utilize the network of operational WSR-88D radars to build a climatology of the vertical profiles of radar variables, such as radar reflectivity Z, differential reflectivity Z DR , and specific differential phase K DP as well as the radar-retrieved vertical profiles of ice water content (IWC) above the melting layer and liquid water content below it, mean volume diameter D m , and total number concentration N t of ice and liquid particles. Such climatology was created for continental/marine mesoscale convective systems (MCSs) and tropical cyclones including hurricanes. The dataset includes 13 continental MCSs, 10 marine MCSs, and 11 tropical cyclones. Separate statistics of the “background” vertical profiles and the ones associated with high IWC aloft have been obtained in the course of this study. It is shown that continental MCSs exhibit larger size of ice in lower concentration aloft compared to the marine MCSs and especially tropical cyclones/hurricanes. A combination of high KDP and low Z aloft signifies lower D m , higher N t , and often substantial IWC.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Quasi‐Steady State Supersaturation: Do High Values Derived From ESCAPE Represent Real High Supersaturations and the Potential for Condensational Invigoration?

Deep convective clouds were intensively sampled during the Experiment of Sea Breeze Convection, Aerosols, Precipitation, and Environment (ESCAPE) with coordinated flights of the NRC Convair-580 and SPEC Learjet. A total of 219 updraft core segments were sampled over coastal Texas and Louisiana under diverse meteorological conditions. Median updraft properties included widths of ∼1 km, velocities of 4.8 m s −1 , droplet number concentrations of ∼400 cm −3 , and liquid water contents of 0.9 g m −3 . The limitations of using the quasi-steady state approximation to derive supersaturations were explored. Supersaturation (S QSS ) estimated from in situ observations under a quasi-steady state assumption averaged 0.4% but occasionally exceeded 2%, with values >1% (high supersaturations) identified as statistical outliers. Two case studies illustrated the conditions linked to high supersaturations. In a storm over the Gulf, median core S QSS reached 2.46% in the developing stage compared to 2.17% in the mature stage under similar thermodynamic conditions. In a storm over coastal Louisiana, S QSS peaked near 11% within a 13.7-m s −1 updraft, accompanied by predominantly supercooled liquid droplets at −13°C and exceptionally low diameter concentrations of 0.29 mm cm −3 . Bootstrap analysis of all sampled cores showed that high supersaturations are most probable in cold and mixed-phase regimes with moderate to strong updrafts and are strongly influenced by vertical velocity and droplet number concentrations. In conclusion, while extreme supersaturations (∼10%) were rare, their occurrence underscores the need for targeted multiplatform observations to resolve their spatiotemporal variability and assess their potential role in deep convective invigoration.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2011

Passive Microwave Remote Sensing of Falling Snow and Associated GPM Field Campaigns

Retrievals of falling snow from space represent one of the next important challenges for the atmospheric, hydrological, and energy budget scientific communities. Historically, retrievals of falling snow have been difficult due to the relative insensitivity of satellite rain-based channels as used in the past. We emphasize the use of high frequency passive microwave channels (85-200 GHz) since these are more sensitive to the ice in clouds and have been used to estimate falling snow from space. While satellite-based remote sensing provides global coverage of falling snow events and the science is relatively new, retrievals are still undergoing development with challenges remaining. There are several current satellite sensors, though not specifically designed for estimating falling snow, are capable of measuring snow from space. These include NOAA's AMSU-B, the MHS sensors, and CloudSat radar. They use high frequency (greater than 85 GHz) passive and active microwave and millimeter-wave channels that are sensitive to the scattering from ice and snow particles in the atmosphere. Sensors with water vapor channels near 183 GHz center line provide opaqueness to the Earth's surface features that can contaminate the falling snow signatures, especially over snow covered surface. In addition, the Global Precipitation Measurement (GPM) mission scheduled for launch in 2013 is specifically designed to measure both liquid rain and frozen snow precipitation. Since falling snow from space is the next precipitation measurement challenge from space, information must be determined in order to guide retrieval algorithm development for these current and future missions. This information includes thresholds of detection for various sensor channel configurations, snow event system characteristics, and surface types. For example, can a lake effect snow system with low cloud tops having an ice water content (IWC) at the surface of 1.0 gram per cubic meter be detected? If this information is known, we can focus retrieval efforts on detectable storms and concentrate advances on achievable results. In this work, the focus is to determine thresholds of detection for falling snow for various snow conditions over land and lake surfaces. The results rely on simulated Weather Research Forecasting (WRF) simulations of falling snow cases [9] since simulations provide all the information to determine the measurements from space and the ground truth. This analysis relies on data from the Canadian CloudSat/CALIPSO Validation Program (C3VP) field campaign held from October 31, 2006 through March 1, 2007. In January 2012 GPM will return to the C3VP area for the GPM Cold Precipitation Experiment (GCPEx). This presentation will describe the thresholds-of-detection procedure and results, as well as the field campaign details.

Skofronick-Jackson, Gail↗
DOE OSTI2020

Multi-Element Water Content System Instrument Handbook

The SEA Model WCM-2000 multi-element water content system was designed to provide aircraft and wind tunnel users with a single, rugged sensor to simultaneously measure liquid water content (LWC), total water content (TWC), and ice water content (IWC). The instrument consists of four heated stainless steel elements, each with a different shape or size. Each element is directly heated by low-voltage DC current flowing through the element. These elements are maintained at a constant temperature, typically 140°C, by a digital closed-loop control system. Three of the heated elements are exposed directly to the airstream and incoming cloud water. A fourth element, the reference/comp element, is arranged to be exposed to the airflow but not to incoming cloud water. This element is used to establish the “dry power term” that is subtracted from the other three elements’ power readings to establish the measured water content.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1990

Interpretation of ground-based radiometric observations in terms of a gravity wave model

An analysis is presented of 2-hour and 4-hour segments of data taken at Denver, Colorado, on February 3, 1984, by a ground-based radiometer designed and operated by the Wave Propagation Laboratory of the National Oceanic and Atmospheric Administration (NOAA). The zenith-viewing instrument has two moisture-sensing and four temperature-sensing channels. It is demonstrated that a peak at a period of 10 min, present in the spectra of the measured brightness temperature and of the derived geopotential heights, thicknesses, and vertically integrated water vapor content, is due to an internal gravity wave generated by wind shear in the jet aloft. This analysis shows that the radiometer has the sensitivity to detect such disturbances and that the mathematical inversion technique used to retrieve the geopotential field and other integrated quantities retains the derived information as well. Finally, a linear expression is derived which relates the brightness temperature to the atmospheric temperature, density, humidity, and cloud liquid perturbation fields.

Canavero, F. G.↗
NASA NTRS1997

A Study of Large Droplet Ice Accretion in the NASA Lewis IRT at Near-Freezing Conditions

Results of experiments designed to determine the effects of large droplet ice accretion on a NACA 23012 wing section are presented. Using primarily an icing condition with a median volumetric diameter droplet size of 160 micron and a liquid water content of 0.82 grams per cubic meter, the effects of various air temperatures, angles of attack, and de-icer boot cycle interval times on ice accretion were studied. Measurements of aerodynamic performance penalties due to the ice accretions were made. Results were also compared with similar tests conducted with a Twin Otter wing section in Part 1 of this study. The form of the ice from the large droplet cloud varied as a function of air total temperature; particularly at the near-freezing temperatures of 28 F to 34 F. Changing boot cycle interval time did not prevent formation of an ice ridge. The most detrimental aerodynamic effects occurred at an air total temperature of 28 F.

Addy, Harold E., Jr.↗
NASA NTRS1995

Diabatic forcing and intialization with assimilation of cloud water and rainwater in a forecast model

In this study, diabatic forcing, and liquid water assimilation techniques are tested in a semi-implicit hydrostatic regional forecast model containing explicit representations of grid-scale cloud water and rainwater. Diabatic forcing, in conjunction with diabatic contributions in the initialization, is found to help the forecast retain the diabatic signal found in the liquid water or heating rate data, consequently reducing the spinup time associated with grid-scale precipitation processes. Both observational Special Sensor Microwave/Imager (SSM/I) and model-generated data are used. A physical retrieval method incorporating SSM/I radiance data is utilized to estimate the 3D distribution of precipitating storms. In the retrieval method the relationship between precipitation distributions and upwelling microwave radiances is parameterized, based upon cloud ensemble-radiative model simulations. Regression formulae relating vertically integrated liquid and ice-phase precipitation amounts to latent heating rates are also derived from the cloud ensemble simulations. Thus, retrieved SSM/I precipitation structures can be used in conjunction with the regression-formulas to infer the 3D distribution of latent heating rates. These heating rates are used directly in the forecast model to help initiate Tropical Storm Emily (21 September 1987). The 14-h forecast of Emily's development yields atmospheric precipitation water contents that compare favorably with coincident SSM/I estimates.

Raymond, William H.↗