Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cation additive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Organic Additive–derived Films on Cu Electrodes Promote Electrochemical CO 2 Reduction to C 2+ Products Under Strongly Acidic Conditions

Electrochemical CO 2 reduction (CO 2 R) at low pH is desired for high CO 2 utilization; the competing hydrogen evolution reaction (HER) remains a challenge. High alkali cation concentration at a high operating current density has recently been used to promote electrochemical CO 2 R at low pH. Herein we report an alternative approach to selective CO2R (>70 % Faradaic efficiency for C 2+ products, FE C2+ ) at low pH (pH 2; H 3 PO 4 /KH 2 PO 4 ) and low potassium concentration ([K + ]=0.1 M) using organic film-modified polycrystalline copper (Modified-Cu). Furthermore, such an electrode effectively mitigates HER due to attenuated proton transport. Modified-Cu still achieves high FE C2+ (45 % with Cu foil /55 % with Cu GDE) under 1.0 M H 3 PO 4 (pH≈1) at low [K + ] (0.1 M), even at low operating current, conditions where HER can otherwise dominate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Structural Damage and Recrystallization Response of Garnet Crystals to Intense Electronic Excitation

Here, the susceptibility to irradiation-induced damage, the fundamental mechanism of the relaxation kinetics, and the corresponding recrystallization effect related to the cation radius ratio are comprehensively investigated for Y 3 Al 5 O 12 and Gd 3 Ga 5 O 12 garnet crystals under 645 MeV Xe 35+ irradiation with different fluences of 5 × 10 11 –3 × 10 12 ions cm –2 . Regarding different lattice distortion and swelling levels, the observed microstructure transformations to disordered and amorphous phases, and corresponding hillock dimensions, consistently confirm that Gd 3 Ga 5 O 12 has a higher susceptibility to radiation damage than Y 3 Al 5 O 12 . Combined with iTS model calculations, although Y 3 Al 5 O 12 has higher atomic temperature and energy deposition than Gd 3 Ga 5 O 12 under the same ion velocity and electronic energy loss, the relatively high thermal conductivity and specific heat coefficient of Y 3 Al 5 O 12 crystals enhance the conduction and dissipation of deposition energy, and Gd 3 Ga 5 O 12 , with a higher cation-radius-ratio (r A /r B ), is more easily damaged to amorphous phase due to the less favorable kinetics of ordering and recovery of a melted track region to the crystalline phase. Additionally, the significant bandgap modification in spectral ranges of 5.88–6.75 eV for Y 3 Al 5 O 12 and 4.83–5.41 eV for Gd 3 Ga 5 O 12 , and the enhancement of defect-assisted-related luminescence are achieved, providing a basis to design novel optoelectronic devices in microelectronics fields.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Peptide-assisted supramolecular polymerization of the anionic porphyrin meso-tetra(4-sulfonatophenyl)porphine

Electronics made from biological materials are desirable for use in medical devices, biosensors, and soft robotics because they have properties inaccessible to current inorganic technologies. Here, a series of cationic peptides were developed to self-assemble with the anionic porphyrin meso-tetra(4-sulfonatophenyl)porphine (TPPS4) into supramolecular light-harvesting wires known as J-aggregates were developed. In addition to quantifying the binding events between each peptide and TPPS 4 , we found co-incubation with mixed peptides allowed TPPS 4 to bridge two different peptides at their terminal porphyrin-binding regions. The J-aggregates formed on macroscopic scale in near quantitative yield within similar to 3 h and readily interconverted with the soluble monomers upon cycling the pH; to our knowledge, this is the first report of a peptide-porphyrin system with such properties. This work has practical and conceptual relevance to the development of new bioelectronic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Amorphous K–Co–Mo–S x Chalcogel: A Synergy of Surface Sorption and Ion-Exchange

Chalcogel represents a unique class of meso- to macroporous nanomaterials that offer applications in energy and environmental pursuits. We report the synthesis of an ion-exchangeable amorphous chalcogel using a nominal composition of K 2 CoMo 2 S 10 (KCMS) at room temperature is reported. Synchrotron X-ray pair distribution function (PDF), X-ray absorption near-edge structure (XANES), and extended X-ray absorption fine structure (EXAFS) reveal a plausible local structure of KCMS gel consisting of Mo 5+ 2 and Mo 4+ 3 clusters in the vicinity of di/polysulfides which are covalently linked by Co 2+ ions. The ionically bound K + ions remain in the percolating pores of the Co–Mo–S covalent network. XANES of Co K-edge shows multiple electronic transitions, including quadrupole (1s→3d), shakedown (1s→4p + MLCT), and dipole allowed 1s→4p transitions. Remarkably, despite a lack of regular channels as in some crystalline solids, the amorphous KCMS gel shows ion-exchange properties with UO 2 2+ ions. Additionally, it also presents surface sorption via [S∙∙∙∙UO 2 2+ ] covalent interactions. Overall, this study underscores the synthesis of quaternary chalcogels incorporating alkali metals and their potential to advance separation science for cations and oxo-cationic species by integrating a synergy of surface sorption and ion-exchange.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Effects of dissolved cations, dissolved organic carbon, and exposure concentrations on per- and polyfluoroalkyl substances bioaccumulation in freshwater algae

Per- and polyfluoroalkyl substances (PFAS) have attracted global attention because of their persistence, toxicity, bioaccumulation potential, and associated adverse effects. As important primary producers, freshwater algae constitute the base of the food web in freshwater aquatic ecosystems. However, the effects of key environmental factors on PFAS uptake and bioaccumulation in freshwater algae have not been thoroughly studied. In this study, three bioaccumulation experiments were conducted to evaluate the influence of dissolved cations, dissolved organic carbon, and exposure concentrations on PFAS bioaccumulation in algae. Among the 14 studied PFAS, seven long-chain PFAS tended to bioaccumulate in algae. Elevated divalent cations (Ca 2+ and Mg 2+ ) and dissolved organic carbon did not significantly change the algal bioconcentration factors (BCFs) of PFAS, suggesting complexity of the interactions among PFAS, environmental factors, and biotic activities. Additionally, increasing exposure concentrations (0.5, 1, 5, and 10 μg/L of each PFAS) increased PFAS concentrations in algae but decreased the BCF values. This indicated that attention should be paid to the application of BCFs in future studies, including ecological risk assessment. Moreover, fluorotelomer sulfonic acids (FTSs) were incompletely recovered, suggesting that biotransformation occurred. Further studies should be conducted to evaluate whether algae play a role in FTSs biotransformation and to determine the mechanisms. In conclusion, studying the impacts of key environmental factors on PFAS bioaccumulation in algae is crucial for understanding the bioaccumulation processes that occur at the lowest trophic level and that eventually affect the dynamics of entire aquatic ecosystems.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2021

From Three-Dimensional Clathrates to Two-Dimensional Zintl Phases AMSb 2 (A = Rb, Cs; M = Ga, In) Composed of Pentagonal M–Sb Rings

Three new antimonide Zintl phases, RbGaSb 2 , CsGaSb 2 , and CsInSb 2 , were discovered during exploration of corresponding A–M–Sb (A = Rb, Cs; M = Ga, In) ternary systems while searching for new clathrates. The AGaSb 2 phases crystallize in the tetragonal space group P4 2 /nmc (No. 137) in the LiBS 2 structure type, while CsInSb 2 crystallizes in lower symmetry in the orthorhombic space group Cmce (No. 64) in the KGaSb 2 structure type with additional disorder of one of the Cs sites. The crystal structures of all three reported AMSb 2 compounds are composed of two-dimensional [MSb 2 ] – tetrahedral layers separated by Rb + or Cs + cations. [MSb 2 ] – layers are built from fused M–Sb pentagons and hexagons, which are also the main structural units for A 8 M 27 Sb 19 clathrate cages. The semiconductor nature of AMSb 2 was suggested by band structure calculations and confirmed by transport property characterization. CsGaSb 2 is a rare example of an n-type pnictide Zintl phase. Finally, all reported compounds exhibit low thermal conductivity typical for complex antimonides of heavy elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Synthesis and characterization of magnetic ionic liquids containing multiple paramagnetic lanthanide and transition metal centers and functionalized diglycolamide ligands

Magnetic ionic liquids (MILs) containing paramagnetic centers have gained widespread recognition as sustainable solvents due to their ability to respond to an external magnetic field. The physico-chemical properties of MILs are dependent on the choice of anion/cation ligands and metal centers; the search for highly tunable ligands and precursors that can confer favorable characteristics, such as low viscosity, is ongoing. Diglycolamides employed as cationic ligands have been previously shown to form hydrophobic MILs that can simultaneously incorporate multiple lanthanide metal centers in both the anion/cation. Despite their enhanced magnetic susceptibility, the effect of diglycolamide chemical structure modifications on the physico-chemical properties of MILs has not been thoroughly studied. Additionally, the possibility of forming diglycolamide-based MILs with popularly employed transition metals has not been investigated and combinations that can simultaneously embed two different types of metal centers in both the anion/cation have not been explored. In this study, thirty (30) MILs comprised of lanthanide and transition metals were synthesized by examining their chelation to both straight-chained and branched diglycolamides. Here, transition metal-based MILs were found to possess high thermal stabilities up to 235 °C compared to 192 °C for those comprised of lanthanides. While MILs comprised of rare-earth metal centers exhibited the lowest viscosities, substituting lanthanides with transition metals in just the anion or cation resulted in enhanced thermal stability and reduced viscosity. The effective magnetic moment for these MILs varied between 4.71 and 21.08 µ B and was much higher compared to all previous classes of MILs prepared using the same metals. Results from this study explore all possible modifications that can be made to these MILs in an effort to demonstrate their structural tunability, which is often highly desirable in various applications, including organic synthesis and chemical separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Bioinspired stability enhancement in deuterium-substituted organic–inorganic hybrid perovskite solar cells

Abstract In hybrid perovskite solar cells (PSCs), the reaction of hydrogens (H) located in the amino group of the organic A-site cations with their neighboring halides plays a central role in degradation. Inspired by the retarded biological activities of cells in heavy water, we replaced the light H atom with its abundant, twice-as-heavy, nonradioactive isotope, deuterium (D) to hamper the motion of H. This D substitution retarded the formation kinetics of the detrimental H halides in Pb-based PSCs, as well as the H bond-mediated oxidation of Sn2+ in Sn–Pb-based narrow-bandgap PSCs, evidenced by accelerated stability studies. A computational study indicated that the zero point energy of D-based formamidinium (FA) is lower than that of pristine FA. In addition, the smaller increase in entropy in D-based FA than in pristine FA accounts for the increased formation free energy of the Sn2+ vacancies, which leads to the retarded oxidation kinetics of Sn2+. In this study, we show that substituting active H with D in organic cations is an effective way to enhance the stability of PSCs without sacrificing photovoltaic (PV) performance. This approach is also adaptable to other stabilizing methods.

14 SOLAR ENERGY↗
DOE OSTI2023

Organic Additive‐derived Films on Cu Electrodes Promote Electrochemical CO 2 Reduction to C 2+ Products Under Strongly Acidic Conditions

Abstract Electrochemical CO 2 reduction (CO 2 R) at low pH is desired for high CO 2 utilization; the competing hydrogen evolution reaction (HER) remains a challenge. High alkali cation concentration at a high operating current density has recently been used to promote electrochemical CO 2 R at low pH. Herein we report an alternative approach to selective CO 2 R (>70 % Faradaic efficiency for C 2+ products, FE C2+ ) at low pH (pH 2; H 3 PO 4 /KH 2 PO 4 ) and low potassium concentration ([K + ]=0.1 M) using organic film‐modified polycrystalline copper (Modified‐Cu). Such an electrode effectively mitigates HER due to attenuated proton transport. Modified‐Cu still achieves high FE C2+ (45 % with Cu foil /55 % with Cu GDE) under 1.0 M H 3 PO 4 (pH≈1) at low [K + ] (0.1 M), even at low operating current, conditions where HER can otherwise dominate.

Nie, Weixuan↗
DOE OSTI2022

Engineering Catalyst–Electrolyte Microenvironments to Optimize the Activity and Selectivity for the Electrochemical Reduction of CO 2 on Cu and Ag

We report the electrochemical reduction of carbon dioxide (CO 2 R) driven by renewably generated electricity (e.g., solar and wind) offers a promising means for reusing the CO 2 released during the production of cement, steel, and aluminum as well as the production of ammonia and methanol. If CO 2 could be removed from the atmosphere at acceptable costs (i.e., <$100/t of CO 2 ), then CO 2 R could be used to produce carbon-containing chemicals and fuels in a fully sustainable manner. Economic considerations dictate that CO 2 R current densities must be in the range of 0.1 to 1 A/cm 2 and selectivity toward the targeted product must be high in order to minimize separation costs. Industrially relevant operating conditions can be achieved by using gas diffusion electrodes (GDEs) to maximize the transport of species to and from the cathode and combining such electrodes with a solid-electrolyte membrane by eliminating the ohmic losses associated with liquid electrolytes. Additionally, high product selectivity can be attained by careful tuning of the microenvironment near the catalyst surface (e.g., the pH, the concentrations of CO 2 and H 2 O, and the identities of the cations in the double layer adjacent to the catalyst surface).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Thermodynamics of the Metal Carbonates and Bicarbonates of Mn, Co, Ni, Cu, and Zn Relevant to Mineral Energetics

The gas phase heats of formation of ground-state MCO 3 , M(HCO 3 ) 2 , and M(HCO 3 )(OH), where M = Mn, Co, Ni, Cu, and Zn, have been predicted using the correlated molecular orbital theory at the CCSD(T) level extrapolated to the complete basis set limit using the Feller–Peterson–Dixon (FPD) approach. Cohesive energies of the carbonates were predicted based on the calculated gas phase and experimental solid heats of formation. Coulombic dissociation energies (CDEs) between metal cations and anions show a near-linear correlation with Shannon metal cation atomic radii, yet no correlation is found with the hardness of these cations. The total reaction dissociation energies (TRDEs) of transition metals are higher than their CDEs for the di-bicarbonates, in contrast to those for Mg and Ca based on our prior work. In addition to differences in the energies needed to prepare the transition metal dications, electron donation from the ligands to the 3d orbitals of open-shell transition metal dications from lone pairs of adjacent O atoms also plays a role. No electron donation from the ligands to the fully occupied 3d orbitals of Zn and Cd was found. Decomposition energies for generating MO, CO 2 , and/or H 2 O were calculated. Gas phase metal exchange energies only partially correlate with the electrochemical series for M(s) → M 2+( aq). The FPD heats of formation were used to benchmark a range of density functional theory exchange–correlation functionals, including those commonly used in solid-state mineral calculations. None of the functionals provided chemical accuracy agreement (±1 kcal/mol) with the FPD results. So, the best agreement with the FPD results is predicted for the $\tau$-HCTH functional with an average unsigned error of 8.3 kcal/mol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Water or Anion? Uncovering the Zn 2+ Solvation Environment in Mixed Zn(TFSI) 2 and LiTFSI Water-in-Salt Electrolytes

Applications of aqueous zinc batteries for grid-scale energy storage are limited by their poor reversibility and the competing water splitting reaction. The recent invention of a water-in-salt (WIS) electrolyte concept provides a new route enabling a stable and highly reversible aqueous zinc battery chemistry. In the present work, a mixed zinc bis(trifluoromethane sulfonyl)imide (Zn(TFSI) 2 ) and LiTFSI WIS electrolyte was studied using X-ray total scattering, X-ray absorption, and Fourier transform infrared spectroscopy in conjunction with classical molecular dynamics simulations. It was found that, in the highly concentrated WIS electrolyte consisting of 1 m Zn(TFSI) 2 and 20 m LiTFSI, Zn 2+ cations are mainly solvated by six waters in their first solvation shell, while the TFSI – anions are completely excluded. This ion solvation picture is fundamentally different from the previous understandings. The results suggest that additional studies are needed to fully understand the unusual stability and reversibility of zinc-WIS electrolyte-based batteries.

25 ENERGY STORAGE↗
DOE OSTI2020

Ultrafast vibrational dynamics of a trigonal planar anionic probe in ionic liquids (ILs): A two-dimensional infrared (2DIR) spectroscopic investigation

A major impediment limiting the widespread application of ionic liquids (ILs) is their high shear viscosity. Incorporation of a tricyanomethanide (TCM - ) anion in ILs leads to low shear viscosity and improvement of several characteristics suitable for large scale applications. However, properties including interactions of TCM - with the local environment and dynamics of TCM - have not been thoroughly investigated. Herein, we have studied the ultrafast dynamics of TCM - in several imidazolium ILs using linear IR and two-dimensional infrared spectroscopy techniques. The spectral diffusion dynamics of the CN stretching modes of TCM - in all ILs exhibit a nonexponential behavior with a short time component of ~2 ps and a long time component spanning ~9 ps to 14 ps. The TCM - vibrational probe reports a significantly faster relaxation of ILs compared to those observed previously using linear vibrational probes, such as thiocyanate and selenocyanate. Our results indicate a rapid relaxation of the local ion-cage structure embedding the vibrational probe in the ILs. The faster relaxation suggests that the lifetime of the local ion-cage structure decreases in the presence of TCM - in the ILs. Linear IR spectroscopic results show that the hydrogen-bonding interaction between TCM - and imidazolium cations in ILs is much weaker. Shorter ion-cage lifetimes together with weaker hydrogen-bonding interactions account for the low shear viscosity of TCM - based ILs compared to commonly used ILs. In addition, this work demonstrates that TCM - can be used as a potential vibrational reporter to study the structure and dynamics of ILs and other molecular systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Soft x-ray spectroscopy of ammonium sulfate aerosols at varied pH conditions

Aqueous aerosols are useful model systems for understanding the physical chemistry that takes place in the Earth’s atmosphere, as well as the chemistry of other solar system objects. Ammonium sulfate aerosols are impacted by anthropogenic sources such as farming and shipping and are understood to be important seeds of cloud nucleation in the atmosphere, affecting climate. X-ray photoelectron spectroscopy and near edge x-ray absorption fine structure spectroscopy were used in tandem to probe the surface and bulk properties of aqueous (NH 4 ) 2 SO 4 , respectively. Aerosolized solutions of (NH 4 ) 2 SO 4 , some altered with NaOH to modify pH, were introduced via an aerodynamic lens to a velocity map imaging instrument for detection. The results show that as pH and sodium cation concentration increase, sulfate anion and ammonia become more prevalent at the surface, and the aerosol surface appears to become drier. However, most of the aerosol remains aqueous, with ion concentrations insensitive to the addition of NaOH. Density functional theory calculations were also performed to probe the coordination environment at the aerosol surfaces to understand the underlying phenomena. Finally, the changes seen on the surface of the aerosol underscore the importance of pH in regulating the structure and chemical properties of atmospherically relevant aerosols.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Well-designed Crosslinked Polymer Electrolyte Enables High Ionic Conductivity and Enhanced Salt Solvation

A new facile single-step method to fabricate crosslinked polymer electrolyte membranes consisting of branched poly(ethyleneimine), (PEI) and poly(ethylene oxide), (PEO) is demonstrated. The membranes exhibit excellent ionic conductivity (1.2 × 10 –3 S cm –1 at 80 °C) with minimal addition of plasticizer (20 wt%). The amine functional group in the PEI-PEO crosslinked matrix provides Lewis basic and hydrogen bonding characteristics that facilitate the dissolution of lithium salt and enables a higher cation transport number than a PEO crosslinked matrix. The glass transition temperature, degree of crystallinity, and room temperature storage modulus increases with decreasing crosslink density and increasing ratio of free amines. The resultant ionic conductivity and mechanical strength can be flexibly tailored by varying the molar ratio of free amine moieties in the crosslinked PEI-PEO matrix. This study provides an improved synthesis method, in-depth characterization, and fundamental insights on the effect of free amine moieties on the transport properties of a highly conductive gel polymer electrolyte.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1984

Effect of surfactants and temperature on the hyperfiltration performance of poly(ether/urea) membranes

The individual and combined effects of pasteurization temperature (347 K) and surfactants (anionic, cationic, and neutral) on a poly(ether/urea) thin-film hyperfiltration membrane were studied. Performance of this positively charged membrane was measured in terms of sodium chloride rejection and water flux. The observed effect was mostly on water flux and minimal on salt rejection. Pasteurization temperature caused an irreversible flux decline (flux decline slope of 0.09). The gradual flux reduction caused by neutral and cationic surfactants was reversible, whereas the flux reduction caused by anionic surfactant was irreversible and of similar magnitude to flux reduction caused by pasteurization temperature. The effects of anionic surfactant and pasteurization temperature were additive. Because of flux decline at elevated temperatures the poly(ether/urea) membrane is not very attractive for long-term spaceflight use.

Leban, M. I.↗
DOE OSTI2022

Promoting the water dissociation of nickel sulfide electrocatalyst through introducing cationic vacancies for accelerated hydrogen evolution kinetics in alkaline media

Developing cost-effective non-precious electrocatalysts with excellent HER performance in alkaline media is of significance for industrial hydrogen production. Herein, we successfully endow Ni 3 S 2 with unprecedentedly enhanced alkaline HER activities by introducing nickel vacancies. The Ni 3 S 2 catalyst with nickel vacancies exhibits an ultralow overpotential of 35 mV at 10 mA cm –2 in 1 M KOH electrolyte, outperforming commercial Pt/C (56 mV) and most reported non-precious electrocatalysts. The electron paramagnetic resonance and X-ray absorption fine structure etc. validates the formation of Ni vacancies and the change of the geometric/electronic structure of Ni 3 S 2 . Additionally, the theoretical calculations reveal that the Ni sites with higher valence state neighbouring the Ni vacancies can promote the water dissociation, playing a vital role in accelerating HER kinetics in alkaline media. Finally, this work may provide a universal strategy to enhance the HER activity of transition-metal compound catalysts in alkaline media by means of cationic defect engineering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗