Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “catalytic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Reduced graphene oxide catalytically enhances the rate of cyanate ester curing under variable frequency microwave heating

Here, the curing of Lonza Primaset PT-30 novolac cyanate ester resin and EPON 826 bisphenol-A diglycidyl ether were investigated using convective thermal heating and variable frequency microwave (VFM) heating. The addition of 1 part per hundred reduced graphene oxide (r-GO) to PT-30 novolac cyanate ester increased the VFM cure rate compared to thermal heating. Curing it at 160°C for 240 min with VFM heating resulted in a 55% degree of cure compared to a 26% degree of cure with thermal heating. This observed VFM rate enhancement is due to selective microwave heating of the r-GO particles in the resin resulting in increased r-GO catalytic activity toward cyanate ester curing. It is both a thermal and catalytic effect, the latter of which is absent when r-GO is added to a bisphenol-A diglycidyl ether resin with o-phenylenediamine hardener. Impurities present in the PT-30 matrix do not appear to contribute to its overall cure kinetics, nor do they participate in the observed VFM rate enhancement.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Regulating the Catalytic Activity of Pd Nanoparticles by Confinement in Ordered Mesoporous Supports

Studying structure-sensitive reactions requires the synthesis of catalytic nanoparticles with precisely controlled sizes. Here we demonstrate the facile production of size controlled Pd nanoparticles by confinement in the pores of mesoporous silica nanoparticles (MSN). We show that Pd particles 2.1 nm in size have a higher catalytic activity than larger nanoparticles for the Suzuki-Miyaura cross coupling between 4’-bromoacteophenone and phenyl boronic acid and for the hydrogenation of phenol in aqueous phase. The enhanced activity can be explained in terms of increased number of coordinatively unsaturated sites and higher back donation capacity of the small nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Allosteric Tuning of Caspase–7: Establishing the Nexus of Structure and Catalytic Power

Caspase-7 (C7), a cysteine protease involved in apoptosis, is a valuable drug target for its role in human diseases (e. g., Parkinson's, Alzheimer's, sepsis). The C7 allosteric site has great potential for small-molecule targeting, but numerous drug discovery efforts have identified precious few allosteric inhibitors. Here we present the first selective, drug-like inhibitor of C7 along with several other improved inhibitors based on our previous fragment hit. We also provide a rational basis for the impact of allosteric binding on the C7 catalytic cycle by using an integrated approach including X-ray crystallography, stopped-flow kinetics, and molecular dynamics simulations. Our findings suggest allosteric binding disrupts C7 pre-acylation by neutralization of the catalytic dyad, displacement of substrate from the oxyanion hole, and altered dynamics of substrate binding loops. This work advances drug targeting efforts and bolsters our understanding of allosteric structure–activity relationships (ASARs).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Catalytic Autoxidation for Depolymerization of Multilayer Plastic Films

Recycling multilayer plastic films is challenged by a diversity of polymers, prompting development of new recycling methods. For the depolymerization of mixed polymers like those in multilayer films, metal-catalyzed autoxidation offers a versatile chemical recycling method to deconstruct multiple polymers to useful oxygenates. Here, we demonstrate that catalytic autoxidation is effective for depolymerizing multilayer films across diverse chemistries. We investigated conditions for a model polyethylene substrate using a Co, Mn, and Br cocatalyst system, achieving full carbon closure with oxygenated small molecules contributing up to 48 mol% carbon. Subsequently, we characterized product distributions for several common polymers used in multilayer films using high-resolution mass spectrometry (HRMS) and developed analytical methods to quantify the resulting complex product streams. Optimized conditions for polyethylene were applied to 11 multilayer plastic films containing 10 different polymers, including films with nonpolymeric potential disrupters like aluminum foil and titanium dioxide, showing that catalytic autoxidation is effective across a broad range of polymer types and is resistant to disrupters and additives. The generation of CO 2 in these reactions overall suggests that both reaction engineering and modifications to the reaction conditions will be required to achieve higher yields of soluble oxygenated products.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Novel Co 5 Cluster Based Triazole Bridged Cobalt-Fluorophosphate: Synthesis, Structure, Magnetic and Heterogeneous Catalytic Epoxidation Studies

A novel triazole bridged cobalt fluorophosphate coordination polymer with the formula {Co 5 (1,2,4-triazole) 2 (OH) 2 (PO 3 F) 4 } n has been synthesized. Single crystal X-ray studies reveal that the compound comprises of Co 5 clusters which ultimately build the whole framework, here all cobalt centers are in octahedral geometry established from continuous shape analysis. All the cobalt centers are in Co(II) oxidation state and the results are supported by the bond valence sum (BVS) calculation. The sample has been characterized by single crystal X-ray, powder X-ray, FTIR and TGA analysis. The compound was tested for olefin catalysis performance and magnetism. Magnetization measurements reveal overall antiferromagnetic interactions among the Co(II) ions. The compound is very active in the catalytic transformation of olefins to their corresponding epoxides. In conclusion, catalytic epoxidation studies reveal that cyclohexene and styrene can be converted up to 97% with almost 65% selectivity of products with higher TON numbers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Divanadium substituted keggin [PV 2 W 10 O 40 ] on non-reducible supports-Al 2 O 3 and SiO 2 : synthesis, characterization, and catalytic properties for oxidative dehydrogenation of propane

Molecular metal oxide cluster, K 5 [α-1,2-PV 2 W 10 O 40 ] (PV 2 W 10 ), was found to have intrinsic catalytic activity for the oxidative dehydrogenation of propane with high selectivity (> 80%) to propylene at low propane conversion (0.3%). Synthesis of dispersed PV 2 W 10 in non-reducible supports, γ-Al 2 O 3 and SiO 2 , was done by incipient wetness impregnation. The supported catalysts were characterized by IR, Raman spectroscopy, nitrogen adsorption, x-ray powder diffraction (PXRD), elemental analysis, hydrogen temperature-programmed reduction (H 2 –TPR), and ammonia temperature-programmed desorption (NH 3 –TPD). Catalytic testing of the supported PV 2 W 10 at equimolar cluster concentration revealed that when supported in γ-Al 2 O 3 it is more active (sevenfold increase in propane conversion) but in SiO 2 it is more selective to propylene (94%). The observed performance was due to both an increase in reducibility and higher concentration of strong acid sites for PV 2 W 10 supported in γ-Al 2 O 3 versus SiO 2 . Lastly, PV 2 W10 was shown to remain intact under reaction conditions indicating its thermal and oxidative stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Stabilization of Catalytically Active Surface Defects on Ga-doped La–Sr–Mn Perovskites for Improved Solar Thermochemical Generation of Hydrogen

Solar thermochemical hydrogen (STCH) production from water splitting typically requires performing redox cycles at temperatures above 1200 °C to reduce and re-oxidize the bulk of a reversible material. Bulk processes such as oxygen vacancy formation and oxygen diffusion energies dictate the viability of a material for STCH. The surface plays an important role in the formation and destruction of vacancies and interacts with gas phase water and surface adsorbed species. These surface processes can lead to surface reconfigurations and even the formation of surface phases with stoichiometry and oxygen content very different from the bulk composition. Understanding in-situ the surface chemical state and its evolution under water splitting is important to design nonstoichiometric oxides capable of longer-lasting STCH generation at lower temperatures. In this work, we describe the water splitting active defect sites in LSM ((La 0.65 Sr 0.35 ) 0.95 MnO 3–δ ) and Ga-doped LSM ((La 0.6 Sr 0.4 ) 0.95 (Mn 0.8 Ga 0.2 )O 3–δ ) perovskites during Operando thermochemical water splitting conditions using ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) experiments at 800 °C under steam. We show that sub-stoichiometric La +3 in the oxygen-vacancy rich surface at operating conditions can be used to correlate surface water splitting activity and the creation of surface hydroxide intermediates. The addition of Ga in LSM is shown to drastically stabilize the surface chemical composition by preventing Sr segregation and stabilizing catalytically active surface defects that promote the binding of adsorbed hydroxides. Here, we use Operando AP-XPS quantification of metastable surface hydroxide intermediates (La(OH) 3 ) to determine the amount of catalytically active surface sites in LSM (2.9%) and in LSMG (7.8–8.1%, depending on the bulk oxidation state).

08 HYDROGEN↗
DOE OSTI2024

Hydrocoals from waste biomass via catalytic hydrothermal carbonization processing

This study investigates how operating conditions (temperature and residence time) and benzoyl chloride impact hydrochar production from almond shells through hydrothermal carbonization. Carbon content rises while volatile matter decreases with increasing temperature, yielding a hydrochar with an estimated heating value of 28 MJ/kg. Elevated temperatures lower the O/C and H/C atomic ratios of hydrochars. Even at the lowest temperature under scrutiny, catalytic experiments using benzoyl chloride enhance carbonization and fuel ratio across all temperatures. Hydrochars produced through catalytic runs demonstrate elevated fuel ratios relative to those generated through noncatalytic runs, despite operating under the same conditions. These insights reveal the capacity of benzoyl chloride as a catalyst to improve hydrochar properties, suggesting its utility for advancing both the efficiency and effectiveness of hydrothermal carbonization processes.

09 BIOMASS FUELS↗
DOE OSTI2020

Macroscale Control of Reactivity using 3D Printed Materials with Intrinsic Catalytic Properties

The morphology of heterogeneous catalysts can impact their performance. However, standard manufacturing methods like extrusion or pelleting offer little options for tailoring catalyst shape. Herein, stereolithographic 3D printing is used to produce catalysts with controlled topologies to enhance their performance. A series of magnetic stir-bar compartments (SBC) were 3D printed and tested as catalysts for sucrose hydrolysis. The SBC were printed using acrylic acid (AA) and 1,6-hexanediol diacrylate (HDDA) as acid sites and hydrophobic crosslinking domains, respectively. Variations in the number and tilt direction of the SBC blades produced significant changes in their apparent catalytic activities. These changes resulted from differences in the fraction of active surface effectively interacting with the reactants in solution, as revealed by computational fluid dynamics simulations. Moreover, varying HDDA:AA ratios in SBC regulated reactant-surface interactions to control catalytic activity. Overall, 3D printing catalysts enables quick performance optimization by simultaneously controlling macroscopic structure and molecular composition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Ni5Ga3 Catalysts for CO2 Reduction to Methanol: Exploring the Role of Ga Surface Oxidation/reductions on Catalytic Activity

Ad-Ni5Ga3/SiO2 catalyst, which is highly active and stable for thermal CO2 hydrogenation to methanol, was investigated to understand its surface dynamics during reaction conditions. The catalyst was prepared, tested and characterized using a multitude of techniques, including ex-situ XRD, TEM, H2-TPR, CO chemisorption and in-situ ETEM and APXPS. The formation of Ga2O3 upon air exposure was observed and the consequences on catalytic activity were investigated. Results revealed that upon air exposure Ga migrates from the subsurface region to the surface of the nanoparticles forming a Ga-oxide shell surrounding a metallic core. The oxide shell can be reduced completely at high temperatures and the temperature of the reduction activation treatment plays a crucial role on the catalytic activity. This air exposure-reduction procedure results in a redistribution of the Ga species in the surface/subsurface region, promoted by a higher Ga affinity for oxygen. XRD analysis of the post-reaction samples provide evidence for the partial transformation of a Ni5Ga3 intermetallic phase into a Ni-rich Ni3Ga phase. APXPS data indicate that the Ni-rich phase forms in the subsurface region. A Ga-rich phase exists on the surface, where the Ni/Ga ratio reaches 2/3 upon activation in hydrogen. At low reduction temperatures an amorphous Ga2O3 shell remains, indicating a promotion effect on methanol synthesis activity.

Ni-Ga, intermetallic, methanol synthesis, in-situ ↗
DOE OSTI2022

The effect of silica oxide support on the catalytic activity of nickel-molybdenum bimetallic catalyst toward ethanol steam reforming for hydrogen production

This work investigates the effects of molybdenum promoter and silica oxide (SiO 2 ) support morphology on the ethanol steam reforming (ESR) performance of Nickel-Molybdenum (NiMo) bimetallic catalysts. Ordered mesoporous SiO 2 (SBA-15) and commercial SiO 2 supports were used as the oxide support materials. The synthesized catalysts were prepared via the wet impregnation method and characterized via XRD, H 2 -TPR, BET, FTIR, and Raman techniques. This study shows that NiMo bimetallic catalyst supported on SBA-15 has superior catalytic activity and better coking resistance at an intermediate temperature of 600 ⁰C than commercial SiO 2 supported catalysts. The presence of a uniform mesoporous structure of SBA-15 with an average pore diameter of ~ 2 nm can obstruct the carbon formation, leading to improved coking resistance. The catalytic enhancement of NiMo bimetallic catalysts toward ESR can also be linked to the ability of Mo promoter in enhancing the interaction between NiMo nanoparticles and SiO 2 support materials and restraining agglomeration of Ni nanoparticles, which results in further improvement of NiMo nanoparticle dispersion and inhibit its sintering. The NiMo bimetallic catalysts supported on SBA-15 illustrated the high H 2 yield of ~ 54% and carbon conversion of ~ 89% with the excellent stability for ESR performed at 600 ⁰C and the steam-to-carbon ratio of 2 over 65 hours.

25 ENERGY STORAGE↗
DOE OSTI2025

A simplified CFD approach for modeling mass transport in catalytic open-cell foams

A simplified macroscopic CFD approach is presented to model mass transport including chemical reactions in washcoated open-cell foams. The foam is treated as a porous medium. Species conversion during chemical reactions is modeled using appropriate source terms based on reaction rate expressions and modified to account for the mass transport resistances occurring at the fluid-washcoat interfaces and within the washcoat layers. As example, the catalytic CO oxidation over platinum is studied. The simulation results show good agreement with experimental data from literature. A parametric study on washcoat parameters, such as thickness, tortuosity, porosity, and size, is carried out. Increasing the washcoat thickness from 5 to 100 µm or decreasing the tortuosity to porosity ratio from 5 to 20 decreases the CO conversion by 10 %. The proposed model is found to be reliable and has the advantage of lower computational cost, making it a suitable tool for foam-based catalytic reactor design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Fine-tuning catalytic selectivity by modulating catalyst-environment interactions: CO 2 hydrogenation over Pd-based catalysts

Capturing catalytic behaviors under operational conditions is pivotal to gaining a mechanistic understanding and promoting the design of robust catalysts. The challenge lies in the difficulty of monitoring real-time surface dynamics driven by catalyst-environment interactions. Here, in this work, we introduce a framework based on density functional calculations and kinetic modeling. This framework significantly improves the accuracy of theoretical models’ descriptions of experimental observations by quantifying environmental impacts on surface phases and active sites. CO 2 hydrogenation over Pd-based catalysts is taken as a showcase. The observed selectivity variations of Pd and Pd-M bimetallic catalysts strongly correlate with hydrogen coverage maintained under typical CO 2 hydrogenation conditions. By reducing the amount of surface hydrogen, the selectivity tuned effectively from formic acid toward CO and methanol. This study not only deepens the comprehension of dynamics of active sites under active chemical conditions but also introduces an alternative opportunity for catalytic tuning by modulating catalyst-environment interactions.

03 NATURAL GAS↗
DOE OSTI2020

Identification of the Electronic and Structural Dynamics of Catalytic Centers in Single-Fe-Atom Material

The lack of model single-atom catalysts (SACs) and atomic-resolution operando spectroscopic techniques greatly limits our comprehension of the nature of catalysis. Herein, based on the designed model single-Fe-atom catalysts with well-controlled microenvironments, we have explored the exact structure of catalytic centers and provided insights into a spin-crossover-involved mechanism for oxygen reduction reaction (ORR) using operando Raman, X-ray absorption spectroscopies, and the developed operando 57 Fe Mössbauer spectroscopy. In combination with theoretical studies, the N-FeN 4 C 10 moiety is evidenced as a more active site for ORR. Moreover, the potential-relevant dynamic cycles of both geometric structure and electronic configuration of reactive single-Fe-atom moieties are evidenced via capturing the peroxido (*O 2 -) and hydroxyl (*OH-) intermediates under in situ ORR conditions. Overall, we anticipate that the integration of operando techniques and SACs in this work shall shed some light on the electronic-level insight into the catalytic centers and underlying reaction mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Integrated reactor architecture of conductive network and catalytic nodes to accelerate polysulfide conversion for durable and high-loading Li-S batteries

The development of carbon-based heterogeneous framework host with synergistic catalytic and conductive effects for sulfur cathode is a promising strategy to realize high performance lithium sulfur batteries (LSBs). Here, an integrated reactor architecture with defective carbon nodes (IRA-DC) is designed for serving as high-loading (92.4 wt%) sulfur host. The hierarchical porous IRA-DC consists of untangled conductive carbon nanotube network and Co/N co-doped catalytic nodes with high dispersity. Therein the optimization of electric field distribution and homogenization of adsorption-catalysis sites offer the multi-electron conversion reaction of polysulfides with excellent kinetics and stability. The resultant IRA-DC/S cathode enables a high areal capacity of 8.86 mAh cm -2 under ultra-high sulfur loading (13.1 mg cm -2 ) and lean electrolyte (8 μL mg sulfur -1 ). It also displays a long-term cycling performance (1200 cycles at 1 C) and ultrahigh rate performance up to 20 C (with a capacity of 473.6 mAh g -1 ). In conclusion, this work provides an electrode building strategy by optimizing the environments of heterogeneous electrocatalysis and micro electric field to activate the polysulfide conversion efficiency and utilization of high-loading sulfur in monolithic sulfur-carbon cathodes.

25 ENERGY STORAGE↗
DOE OSTI2022

Manganese(II) complexes of 1,1'-bis[(pyridin-2-yl)methyl)]-2,2'-bipiperidine (PYBP): Synthesis, structure, catalytic properties in alkene epoxidation with hydrogen peroxide, and related mechanistic studies

In this study, several manganese(II) complexes with the stereoisomers of ligand PYBP (1,1'-bis[(pyridin-2-yl)methyl]-2,2'-bipiperidine) and different anions were prepared and characterized by X-ray diffractometry. Complex [Mn II (rac-PYBP)] 2+ (1) was found to be an efficient catalyst of alkene epoxidation by hydrogen peroxide in the presence of acetic acid in acetonitrile at room temperature. Cyclooctene was converted to its epoxide with up to 91 % yield, 99.6 % selectivity, and the turnover number of 180 within 5 min. Fast epoxidations of cyclohexene, 1-decene, styrene, and cis-stilbene were also achieved. Isomeric complex [Mn II (meso-PYBP)] 2+ (2) was catalytically inactive under the same experimental conditions. Stopped-flow spectrophotometry and freeze-quenched EPR spectra show that complex 2 is not oxidized by H 2 O 2 in the presence of acetic acid (AcOH) but instead undergoes partial ligand protonation and liberation of the Mn 2+ cations due to the relatively poor chelating ability of ligand meso-PYBP. The rac-PYBP isomer acts as a better ligand and retains the coordinated Mn center when complex 1 is treated with the H 2 O 2 /AcOH mixture in acetonitrile solution yielding a mixture of intensely colored intermediates likely involving Mn III , Mn IV , and Mn V complexes. Magnetic susceptibility measurements, UV–vis and EPR spectra suggest that dinuclear complexes [Mn III 2 (μ-O)(μ-OAc)(rac-PYBP) 2 ] 3+ and [Mn III Mn IV (μ-O) 2 (rac-PYBP) 2 ] 3+ gradually accumulate in the reaction mixture as inactivated states of the catalyst. Complex 1 also causes fast decomposition of hydrogen peroxide into O 2 gas and H 2 O, which competes with the epoxidation of alkenes and requires gradual addition of H 2 O 2 for its efficient use. The catalytic activity of complex 1 is strongly influenced by its counterions and decreases in order ClO 4 - ≈ SbF 6 - > NO 3 – > Cl - indicating that labile ligands in the coordination sphere of Mn are required for the activation of H 2 O 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Direct interaction of DNA repair protein tyrosyl DNA phosphodiesterase 1 and the DNA ligase III catalytic domain is regulated by phosphorylation of its flexible N-terminus

Tyrosyl DNA phosphodiesterase 1 (TDP1) and DNA Ligase IIIα (LigIIIα) are key enzymes in single-strand break (SSB) repair. TDP1 removes 3'-tyrosine residues remaining after degradation of DNA topoisomerase (TOP) 1 cleavage complexes trapped by either DNA lesions or TOP1 inhibitors. It is not known how TDP1 is linked to subsequent processing and LigIIIα-catalyzed joining of the SSB. Here we define a direct interaction between the TDP1 catalytic domain and the LigIII DNA-binding domain (DBD) regulated by conformational changes in the unstructured TDP1 N-terminal region induced by phosphorylation and/or alterations in amino acid sequence. Full-length and N-terminally truncated TDP1 are more effective at correcting SSB repair defects in TDP1 null cells compared with full-length TDP1 with amino acid substitutions of an N-terminal serine residue phosphorylated in response to DNA damage. TDP1 forms a stable complex with LigIII 170-755 , as well as full-length LigIIIα alone or in complex with the DNA repair scaffold protein XRCC1. Small-angle X-ray scattering and negative stain electron microscopy combined with mapping of the interacting regions identified a TDP1/LigIIIα compact dimer of heterodimers in which the two LigIII catalytic cores are positioned in the center, whereas the two TDP1 molecules are located at the edges of the core complex flanked by highly flexible regions that can interact with other repair proteins and SSBs. As TDP1and LigIIIα together repair adducts caused by TOP1 cancer chemotherapy inhibitors, the defined interaction architecture and regulation of this enzyme complex provide insights into a key repair pathway in nonmalignant and cancer cells.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

The crystal structure of Grindelia robusta 7,13-copalyl diphosphate synthase reveals active site features controlling catalytic specificity

Diterpenoid natural products serve critical functions in plant development and ecological adaptation and many diterpenoids have economic value as bioproducts. The family of class II diterpene synthases catalyzes the committed reactions in diterpenoid biosynthesis, converting a common geranylgeranyl diphosphate precursor into different bicyclic prenyl diphosphate scaffolds. Enzymatic rearrangement and modification of these precursors generate the diversity of bioactive diterpenoids. We report the crystal structure of Grindelia robusta 7,13-copalyl diphosphate synthase, GrTPS2, at 2.1 Å of resolution. GrTPS2 catalyzes the committed reaction in the biosynthesis of grindelic acid, which represents the signature metabolite in species of gumweed (Grindelia spp., Asteraceae). Grindelic acid has been explored as a potential source for drug leads and biofuel production. The GrTPS2 crystal structure adopts the conserved three-domain fold of class II diterpene synthases featuring a functional active site in the γβ-domain and a vestigial α-domain. Substrate docking into the active site of the GrTPS2 apo protein structure predicted catalytic amino acids. Biochemical characterization of protein variants identified residues with impact on enzyme activity and catalytic specificity. Specifically, mutagenesis of Y457 provided mechanistic insight into the position-specific deprotonation of the intermediary carbocation to form the characteristic 7,13 double bond of 7,13-copalyl diphosphate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗