SEARCH · Engineering Papers
Results for “bragg diffraction”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
In Situ Nanoscale Dynamics Imaging in a Proton‐Conducting Solid Oxide for Protonic Ceramic Fuel Cells
Abstract Hydrogen fuel cells and electrolyzers operating below 600 °C, ideally below 400 °C, are essential components in the clean energy transition. Yttrium‐doped barium zirconate BaZr 0.8 Y 0.2 O 3‐d (BZY) has attracted a lot of attention as a proton‐conducting solid oxide for electrochemical devices due to its high chemical stability and proton conductivity in the desired temperature range. Grain interfaces and topological defects modulate bulk proton conductivity and hydration, especially at low temperatures. Therefore, understanding the nanoscale crystal structure dynamics in situ is crucial to achieving high proton transport, material stability, and extending the operating range of proton‐conducting solid oxides. Here, Bragg coherent X‐ray diffractive imaging is applied to investigate in situ and in 3D nanoscale dynamics in BZY during hydration over 40 h at 200 °C, in the low‐temperature range. An unexpected activity of topological defects and subsequent cracking is found on a nanoscale covered by the macroscale stability. The rearrangements in structure correlate with emergent regions of different lattice constants, suggesting heterogeneous hydration. The results highlight the extent and impact of nanoscale processes in proton‐conducting solid oxides, informing future development of low‐temperature protonic ceramic electrochemical cells.
Short-Range Mechanisms in the Creation of a ZnO/InGaAs Interface
Here we perform quantitative analysis of the X-ray absorption data taken in situ during the earliest cycles of the ZnO atomic layer deposition on atomically flat InGaAs (001) surfaces. As deposition progresses, we observe a transition from an amorphous structure to a nanocrystalline one. The former retains much of the characteristics of a ZnO crystal in the Zn coordination shell, while the latter shows atomic ordering up to at least the third neighbor shell of Zn atoms, despite the absence of Bragg X-ray diffraction peaks. We show that the different chemical preparation of the substrate surface affects the ZnO local structure and that, counterintuitively, a stronger short-range order is obtained in the nanostructures characterized by lower local order at the interface. We propose a model that accounts for these findings.
Mechanistic Insights into Defect-Mediated Crystallization Revealed by Lattice Strain Evolution
Structural defects and lattice strain are intrinsic to many crystalline materials, yet their roles in controlling chemical reaction mechanisms and directing crystallization pathways remain poorly understood. Here, in this study, we revealed the three-dimensional evolution of strain and dislocation defects at the nanoscale during the growth of heterogeneously nucleated barite (BaSO 4 ) and calcite (CaCO 3 ) crystals by using coherent X-ray scattering, electron microscopy, and molecular simulations. Unlike barite, which formed with minimal internal strain, calcite developed dislocation defects and exhibited spatially varying strain that increased during growth. During growth in Sr-rich solutions, calcite likely incorporates Sr 2+ into the defects, which further modulates the local lattice structure and increases both the compressive and tensile strain. These findings suggest that calcite crystallization was likely dominated by attachment of precursor phases, which gave rise to defect-enriched domain structures not predicted by classical growth models. By linking defect formation to ion incorporation and growth dynamics, this work provides fundamental insight into how lattice-level strain heterogeneity governs the chemical reactivity of ionic crystals.
Multiplex and simultaneous measurement of displacement and temperature using tapered fiber and fiber Bragg grating
A simple method to work out the multiplexing of tapered fiber based sensors is proposed and demonstrated. By cascading a tapered fiber with a fiber Bragg grating (FBG), the sensor head is provided with a wavelength identification, different FBGs provide the sensor heads with different reflective peaks and they can be distinguished in optical spectrum. By compositing several such sensor heads with a multi-channel beam splitter, a star-style topological structure sensor for multipoint sensing is achieved. At the same time, the output intensity at the peak wavelength is sensitive to one external physical parameter applied on the related FBG-cascaded tapered fiber and the central wavelength of the peak is only sensitive to temperature, so that that parameter and temperature can be measured simultaneously. A sensor for dual-point measurement of the displacement and temperature simultaneously is experimentally demonstrated by using a 2 x 2 coupler in this paper. Experiment results show that the sensor works well and the largest sensitivities reach to 0.11 dB/{mu}m for displacement in the range of 0-400 {mu}m, and {approx}0.0097 nm/ deg. C for temperature between 20 deg. C and 70 deg. C.
Multi-wavelength surface emitting quantum cascade laser based on equivalent phase shift
A novel surface emitting distributed feedback quantum cascade laser emitting around λ ∼ 4.6 μm is demonstrated by employing an equivalent phase shift (EPS) of quarter-wave (λ/4). The EPS is fabricated through extending one sampling period by 50% in the center of a sampled Bragg grating. Single-lobed far-field radiation pattern with a low divergence angle of about 0.6° × 16.8° is obtained. Selective single-mode lasing with a mean side mode suppression ratio above 20 dB and wavelength coverage range of 72 nm is achieved simultaneously on a single wafer only by changing the sampling period.
Mapping Electron Beam-Induced Radiolytic Damage in Molecular Crystals
Every electron crystallography experiment is fundamentally constrained by radiation damage [1]. Despite its crucial importance, little is understood about the onset and progression of radiolysis in beam-sensitive molecular crystals [2]. Since the typical metric used for monitoring the degradation induced by radiolysis is the attenuation of Bragg reflections in electron diffraction patterns [3], the scope of previous analyses [2-6] has mostly been limited to indirect observation via the back focal plane. Here, a simultaneous visualization of the effects of electron beam-induced radiolysis—in both real space and reciprocal space—remains elusive.
Magnetic correlations and structure in bixbyite across the spin-glass transition
Magnetic frustration in atomically ordered crystals gives rise to a broad range of quantum phenomena. The mineral bixbyite, F e 2 - x M n x O 3 , has magnetic frustration induced by atomic disorder. The end-members M n 2 O 3 and β - F e 2 O 3 both have magnetically ordered ground states, but the bixbyite crystal studied here, with a composition F e 1.12 M n 0.88 O 3 , instead undergoes a spin-glass-like transition near 32 K. Here, the magnetic correlations and atomic structure of bixbyite are followed across the spin-glass transition using powder and single-crystal neutron scattering. Refinement of Bragg intensities from neutron diffraction data allows precise determination of the average Fe and Mn concentration on the different crystallographic sites of the structure. No structural transitions occur in bixbyite upon cooling. Using the three-dimensional magnetic difference pair distribution function (3D-mΔPDF), the magnetic correlations are resolved spatially and their temperature dependence determined. The results demonstrate that the spin-spin correlations are strong well above the glass transition temperature, consistent with the spin-glass nature of the magnetism in bixbyite.
Antiferromagnetic order in CaK ( Fe 1 – x Ni x ) 4 As 4 and its interplay with superconductivity
The magnetic order in CaK(Fe 1–x Ni x ) 4 As 4 (1144) single crystals (x = 0.051 and 0.033) has been studied by neutron diffraction. We observe magnetic Bragg peaks associated with the same propagation vectors as found for the collinear stripe antiferromagnetic (AFM) order in the related BaFe 2 As 2 (122) compound. The AFM state in 1144 preserves tetragonal symmetry and only a commensurate, noncollinear structure with a hedgehog spin-vortex crystal (SVC) arrangement in the Fe plane and simple AFM stacking along the c direction is consistent with our observations. The SVC order is promoted by the reduced symmetry in the FeAs layer in the 1144 structure. The long-range SVC order coexists with superconductivity, however, similar to the doped 122 compounds, the ordered magnetic moment is gradually suppressed with the developing superconducting order parameter. Lastly, this supports the notion that both collinear and noncollinear magnetism and superconductivity are competing for the same electrons coupled by Fermi surface nesting in iron arsenide superconductors.
Angle calculations using two detector circles and wavelength
Here, a `2D + λ' mode using two detector angles and wavelength is added to the modes of operation of a six-circle diffractometer, i.e. `4S + 2D' diffractometer [You (1999). J. Appl. Cryst. 32, 614–623]. In synchrotron sources, the X-ray energy, and hence the wavelength, can be a degree of freedom for angle calculations. For diffractometers with two detector circles, therefore, the variable X-ray energy can be the third degree of freedom, sufficient for accessing reciprocal space without rotating the sample. This mode is useful for limited sample rotations or X-ray beams focused smaller than the diffractometer circle of confusion.
Three-dimensional coherent Bragg imaging of spontaneously rotating nanoparticles
This dataset contains spontaneous rocking curves of individual 60 nm gold particles, measured as CDI patterns in the Bragg geometry. The dataset provides a higher-quality alternative to ID 151, and is collected at lower energy, shorter detector distance (~120 mm) and using a He-filled flight tube. Additionally, this data includes measurements along the (111), (200), and (220) directions, providing access to multiple strain directions.
Efficient IR Transmission Diffraction Grating for Circularly Polarized Light
Numerical methods, using rigorous coupled wave theory, are used to design rectangular relief diffraction gratings for an infrared application which requires comparable first order efficiencies in the TE and TM polarization states. The depth, period, and fill factor of the grating are varied to identify optimal two level binary lamellar grating profiles which predict efficiencies for individual TM and TE polarizations above 75 percent, while keeping the difference between the two efficiencies within 10 percent. The application at hand is a rotating, transmissive diffractive scanner for space-based coherent lidar. The operating wavelength is 2.0 microns. A collimated, circularly polarized beam is incident on the diffractive scanner at the Bragg angle; 30 and 45 degree beam deflection angles being studied. Fused silica is the substrate material of choice. Selected designs are fabricated on 3 inch fused silica substrates using lithographic methods. The performance of the test pieces is measured and compared to theoretical predictions.
DYNAMICAL BRAGG AND DIFFUSE SCATTERING EFFECTS AND IMPLICATIONS FOR DIFFRACTOMETRY IN THE 21ST CENTURY
No abstract prepared.
Imaging extended single crystal lattice distortion fields with multi-peak Bragg ptychography
Recent advances in phase-retrieval-based x-ray imaging methods have demonstrated the ability to reconstruct 3D distortion vector fields within a nanocrystal by using coherent diffraction information from multiple crystal Bragg reflections. However, these works do not provide a solution to the challenges encountered in imaging lattice distortions in crystals with significant defect content that result in phase wrapping. Moreover, these methods only apply to isolated crystals smaller than the x-ray illumination, and therefore cannot be used for imaging of distortions in extended crystals. We introduce multi-peak Bragg ptychography which addresses both challenges via an optimization framework that combines stochastic gradient descent and phase unwrapping methods for robust image reconstruction of lattice distortions and defects in extended crystals. Our work uses modern automatic differentiation toolsets so that the method is easy to extend to other settings and easy to implement in high-performance computers. This work is particularly timely given the broad interest in using the increased coherent flux in fourth-generation synchrotrons for innovative material research.
Integrated high-order surface diffraction gratings for diode lasers
High-order surface diffraction gratings acting as a distributed Bragg reflector (DBR) in mesa stripe semiconductor lasers (λ = 1030 nm) have been studied theoretically and experimentally. Higher order interfering radiation modes (IRMs), which propagate off the plane of the waveguide, have been shown to have a crucial effect on the reflection and transmission spectra of the DBR. The decrease in the reflectivity of the DBR in response to the increase in the diffraction efficiency of these modes may reach 80% and more. According to theoretical analysis results, the intensity of the higher order IRMs is determined by the geometry of the DBR groove profile. Experimental data demonstrate that the noncavity modes are responsible for parasitic light leakage losses in the laser cavity. It has been shown that, in the case of nonoptimal geometry of the grating groove profile, the overall external differential quantum efficiency of the parasitic laser emission may exceed 45%, which is more than half of the laser output power. The optimal geometry of the DBR groove profile is trapezoidal, with the smallest possible lower base. Experimental evidence has been presented that this geometry considerably reduces the power of the higher order IRMs and minimises the parasitic light leakage loss. (lasers)
Resonant diffraction of synchrotron radiation in rubidium dihydrophosphate crystals
Purely resonant Bragg reflections 006, 55bar 0, and 666 in a rubidium dihydrophosphate (RbH{sub 2}PO{sub 4}) crystal at the K edge of rubidium have been experimentally and theoretically investigated. These reflections remain forbidden when the resonant dipole-dipole (E1E1) contribution to the resonant atomic factor is taken into account; they may be due to the dipole-quadrupole (E1E2) transitions as well as to the anisotropy atomic factor, which is caused by thermal atomic displacements (thermally induced contribution) and/or local jumps of hydrogen atoms. A numerical simulation showed that, at room temperature (experimental conditions), the thermally induced contribution to the 'forbidden' reflections is dominant.
Reconstruction from a single diffraction pattern of azimuthally projected electron density of molecules aligned parallel to a single axis.
Diffraction from the individual molecules of a molecular beam, aligned parallel to a single axis by a strong electric field or other means, has been proposed as a means of structure determination of individual molecules. As in fiber diffraction, all the information extractable is contained in a diffraction pattern from incidence of the diffracting beam normal to the molecular alignment axis. The limited size of the object results in continuous diffraction patterns characterized by neither Bragg spots nor layer lines. Equations relating the scattered amplitudes to the molecular electron density may be conveniently formulated in terms of cylindrical harmonics. For simulated diffraction patterns from short C nanotubes aligned along their axes, iterative solution of the equation for the zeroth-order cylindrical harmonic and its inverse with appropriate constraints in real and reciprocal space enables the phasing of the measured amplitudes, and hence a reconstruction of the azimuthal projection of the molecule.