Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “binary cycle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Hybrid component and configuration model for combined-cycle units in unit commitment problem

This letter proposes a novel hybrid component and configuration model for combined-cycle gas turbines (CCGTs) participating in independent system operator (ISO) markets. The proposed model overcomes the inaccuracy issues in the current configuration-based model while retaining its simple and flexible bidding framework of configuration-based models. The physical limitations - such as minimum online/offline time and ramping rates - are modeled for each component separately, and the cost is calculated with the bidding curves from the configuration modes. This hybrid mode can represent the current dominant bidding model in the unit commitment problem of ISOs while treating the individual components in CCGTs accurately. The commitment status of the individual components is mapped to the unique configuration mode of the CCGTs. The transitions from one configuration mode to another are also modeled. Finally, no additional binary variables are added, and numerical case studies demonstrate the effectiveness of this model for CCGT units in the unit commitment problem.

25 ENERGY STORAGE↗

Comparison of numerical and post-Newtonian waveforms for generic precessing black-hole binaries

We compare waveforms and orbital dynamics from the first long-term, fully nonlinear, numerical simulations of a generic black-hole binary configuration with post-Newtonian (PN) predictions. The binary has mass ratio q{approx}0.8 with arbitrarily oriented spins of magnitude S{sub 1}/m{sub 1}{sup 2}{approx}0.6 and S{sub 2}/m{sub 2}{sup 2}{approx}0.4 and orbits 9 times prior to merger. The numerical simulation starts with an initial separation of r{approx_equal}11M and orbital parameters determined by 2.5 PN and 3.5 PN evolutions of a quasi-circular binary starting from r=50M. The resulting binaries have very little eccentricity according to the 2.5 PN and 3.5 PN systems, but show eccentricities of e{approx}0.01-0.02 and e{approx}0.002-0.005 in the respective numerical simulations, thus demonstrating that 3.5 PN significantly reduces the eccentricity of the binary compared to 2.5 PN. We perform three numerical evolutions from r{approx_equal}11M with maximum resolutions of h=M/48, M/53.3, M/59.3, to verify numerical convergence. We observe a reasonably good agreement between the PN and numerical waveforms, with an overlap of nearly 99% for the first six cycles of the (l=2, m={+-}2) modes, 91% for the (l=2, m={+-}1) modes, and nearly 91% for the (l=3, m={+-}3) modes. The phase differences between numerical and post-Newtonian approximations appear to be independent of the (l,m) modes considered and relatively small for the first 3-4 orbits. An advantage of the 3.5 PN model over the 2.5 PN one seems to be observed, which indicates that still higher PN order (perhaps even 4.0 PN) may yield significantly better waveforms. In addition, we identify features in the waveforms likely related to precession and precession-induced eccentricity.

99 GENERAL AND MISCELLANEOUS↗

An interpretation of the line profile variations in the IUE spectrum of the Wolf-Rayet binary Gamma(2) Velorum

An analysis of the variable profiles of the high-temperature resonance lines of Si IV in the IUE spectrum of gamma(2) Vel has made it possible to describe these profiles as a superposition of two different profiles, namely, a P Cygni profile that remains practically stationary throughout the orbital cycle and an absorption profile that moves back and forth with phase. To these two profiles is added a very sharp, strong absorption that ought to arise in the layers of the extended gaseous envelope that merge with the interstellar medium. The absorption that moves back and forth during the system's orbital revolution has been interpreted as suggesting a stream going away from the system at an angle of some 110 deg from the direction of the radius vector joining the Wolf-Rayet star with its companion. Such a stream seems to project upon a dense concentration of matter that is located somewhere in the volume between the two stars and moves away at some -700 km/s, and should result from the collision of the winds from the two components. The high-temperature resonance lines of N V and C IV very likely behave similarly to Si IV.

Brandi, Estela↗

CO 2 capture in lignin-derived and nitrogen-doped hierarchical porous carbons

Here, nitrogen-doped and hierarchical porous carbons were synthesized from lignin precursor by KOH and NH 3 activation with BET surface area of 1631–2922 m 2 /g. X-ray photoelectron spectroscopy (XPS) revealed 5.6–7.1 at.% nitrogen with predominantly pyridinic, amino and pyrrolic/pyridonic type of functionality. Maximum CO 2 adsorption capacity at 298 K and 273 K and pressure upto 760 torr (1 bar) was found to be 5.48 and 8.6 mmol/g respectively, which is higher than that of majority of nitrogen-doped carbons, reported in literature. Ideal Adsorbed Solution Theory (IAST)-based selectivity for CO 2 /N 2 revealed that selectivity increases with the increase in nitrogen content. IAST calculations were also employed to calculate the binary adsorption isotherms to simulate mixed gas adsorption for CO 2 and N 2 as a function of total pressure and mole fraction of CO 2 in the gas mixture. Continuous CO 2 adsorption-desorption studies for 10 cycles revealed that all the nitrogen-doped carbons retained its working capacity at the end of the cycles. Finally, a breakthrough study for (10/90) CO 2 /N 2 mixture in a dynamic column experiment confirmed a physical separation of the two components. The overall results suggest that nitrogen-doped carbons from lignin can be used as potential adsorbents for CO 2 capture purposes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simulations of Cyclic Voltammetry for Electric Double Layers in Asymmetric Electrolytes: A Generalized Modified Poisson-Nernst-Planck Model

This paper presents a generalized modified Poisson–Nernst–Planck (MPNP) model derived from first principles based on excess chemical potential and Langmuir activity coefficient to simulate electric double-layer dynamics in asymmetric electrolytes. The model accounts simultaneously for (1) asymmetric electrolytes with (2) multiple ion species, (3) finite ion sizes, and (4) Stern and diffuse layers along with Ohmic potential drop in the electrode. It was used to simulate cyclic voltammetry (CV) measurements for binary asymmetric electrolytes. The results demonstrated that the current density increased significantly with decreasing ion diameter and/or increasing valency |z i | of either ion species. By contrast, the ion diffusion coefficients affected the CV curves and capacitance only at large scan rates. Dimensional analysis was also performed, and 11 dimensionless numbers were identified to govern the CV measurements of the electric double layer in binary asymmetric electrolytes between two identical planar electrodes of finite thickness. A self-similar behavior was identified for the electric double-layer integral capacitance estimated from CV measurement simulations. Two regimes were identified by comparing the half cycle period τ CV and the “RC time scale” τ RC corresponding to the characteristic time of ions’ electrodiffusion. For τ RC ← τ CV , quasi-equilibrium conditions prevailed and the capacitance was diffusion-independent while for τ RC → τ CV , the capacitance was diffusion-limited. The effect of the electrode was captured by the dimensionless electrode electrical conductivity representing the ratio of characteristic times associated with charge transport in the electrolyte and that in the electrode. The model developed here will be useful for simulating and designing various practical electrochemical, colloidal, and biological systems for a wide range of applications.

Wang, Hainan↗

Exploring the Spatiotemporal Coverage of Terrestrial Snow Mass Using a Suite of Satellite Constellation Configurations

Terrestrial snow is a vital freshwater resource for more than 1 billion people. Remotely-sensed snow observations can be used to retrieve snow mass or integrated into a snow model estimate; however, optimally leveraging remote sensing observations of snow is challenging. One reason is that no single sensor can accurately measure all types of snow because each type of sensor has its own unique limitations. Another reason is that remote sensing data is inherently discontinuous across time and space, and that the revisit cycle of remote sensing observations may not meet the requirements of a given snow applications. In order to quantify the feasible availability of remotely-sensed observations across space and time, this study simulates the sensor coverage for a suite of hypothetical snow sensors as a function of different orbital configurations and sensor properties. The information gleaned from this analysis coupled with a dynamic snow binary map is used to evaluate the efficiency of a single sensor (or constellation) to observe terrestrial snow on a global scale. The results show the efficacy achievable by different sensors over different snow types. The combination of different orbital and sensor configurations is explored to requirements of remote sensing missions that have 1-day, 3-day, or 30-day repeat intervals. The simulation results suggest that 1100 km, 550 km, and 200 km are the minimum required swath width for a polar-orbiting sensor to meet snow-related applications demanding a 1-day, 3-day, and 30-day repeat cycles, respectively. The results of this paper provide valuable input for the planning of a future global snow mission.

Lizhao Wang↗

WZ CEPHEI: A CLOSE BINARY AT THE BEGINNING OF CONTACT PHASE

Photometric photoelectric data of the short-period close binary system, WZ Cephei, are presented. A new photometric analysis with the 2003 version of the Wilson-Devinney method confirmed that it is a shallow contact binary (f {approx} 13.3%) with a high level of spot activity on the primary component. Combining new determined times of light minimum with the others published in the literature, the period change of the binary star is investigated. A periodic variation, with a period of 34.2 years and an amplitude of 0fd013, was discovered to be superimposed on a long-term period decrease (dP/dt = -8.8 x 10{sup -8} days year{sup -1}). Both the secular period decrease and the shallow contact configuration suggest that this binary system is at the beginning of contact phase. It is on the way to evolving into a normal overcontact phase via secular angular momentum loss and/or mass transfer from the more massive component to the less massive one. The period oscillation can be explained either by the light-time effect due to the presence of a third body or by magnetic activity. On the one hand, if it is caused by the light-time effect, the mass and the orbital radius of the additional body should be m {sub 3} = 0.17 M {sub sun} and a {sub 3} = 26.6 AU, respectively, when this body is coplanar to the orbit of the eclipsing pair. On the other hand, since the system shows high levels of spot activity, the period oscillation may be explained as a consequence of magnetic cycles. In this case, the required variation of the quadrupole moment is calculated to be 9.2 x 10{sup 49} g cm{sup 2}.

79 ASTRONOMY AND ASTROPHYSICS↗

Controlled synthesis of MnSn(OH){sub 6}/graphene nanocomposites and their electrochemical properties as capacitive materials

We report the synthesis of novel MnSn(OH){sub 6}/graphene nanocomposites produced by a co-precipitation method and their potential application for electrochemical energy storage. The hydroxide decorated graphene nanocomposites display better performance over pure MnSn(OH){sub 6} nanoparticles because the graphene sheets act as conductive bridges improving the ionic and electronic transport. The crystallinity of MnSn(OH){sub 6} nanoparticles deposited on the surface of graphene sheets also impacts the capacitive properties as electrodes. The maximum capacitance of 31.2 F/g (59.4 F/g based on the mass of MnSn(OH){sub 6} nanoparticles) was achieved for the sample with a low degree of crystallinity. No significant degradation of capacitance occurred after 500 cycles at a current density of 1.5 A/g in 1 M Na{sub 2}SO{sub 4} aqueous solution, indicating an excellent electrochemical stability. The results serve as an example demonstrating the potential of integrating highly conductive graphene networks into binary metal hydroxide in improving the performance of active electrode materials for electrochemical energy storage applications. - Graphical abstract: Graphite oxide (GO) can be synthesized by oxidizing graphite using Hummers method. Graphene was reduced from GO by thermal exfoliation. In this work, MnSn(OH){sub 6}/graphene nano-composites were synthesized by a simple co-precipitation method and their electrochemical performances have been explored. Highlights: Black-Right-Pointing-Pointer Noval MnSn(OH){sub 6}/graphene nano-composites were synthesized. Black-Right-Pointing-Pointer Microstructure can be tailored by changing the reaction temperature and time. Black-Right-Pointing-Pointer Crystallinity of MnSn(OH){sub 6} nanoparticles impacts capacitive properties as electrode. Black-Right-Pointing-Pointer Nano-composites display improved electrochemical performance over MnSn(OH){sub 6} alone. Black-Right-Pointing-Pointer Results serve as an example demonstrating the potential for energy storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enthalpy of Formation for Cu–Zn–Sn–S (CZTS) Calculated from Surface Binding Energies Experimentally Measured by Ion Sputtering

Herein, we report an analytical procedure to calculate the enthalpy of formation for thin film multinary compounds from sputtering rates measured during ion bombardment. The method is based on Sigmunds sputtering theory and the BornHaber cycle. Using this procedure, an enthalpy of formation for a CZTS film of the composition Cu1.9Zn1.5Sn0.8S4 was measured as -930 +/- 98 kJ mol1. This value is much more negative than the sum of the enthalpies of formation for the constituent binary compounds, meaning the multinary formation reaction is predicted to be exothermic. The measured enthalpy of formation was used to estimate the temperature dependence of the Gibbs free energy of reaction, which appears consistent with many experimental reports in the CZTS processing literature.

Baryshev, Sergey V.↗

Evidence for Binarity and Possible Disk Obscuration in Kepler Observations of the Pulsating RV Tau Variable DF Cygni

The Kepler light curve of DF Cyg is unparalleled in precision and cadence for any RV Tau star to date, spanning a baseline of ∼4 years and clearly displaying the signature pulsating behavior of alternating deep and shallow minima as well as the long-term trend indicative of an RVb-type variable. We measure DF Cyg’s formal period (the time interval between two successive deep minima) to be 49.84 ± 0.02 days. The trend in the arrival times emulates that of the long-term period. There appear to be precisely 16 deep+shallow minima cycles in one long-term cycle, suggesting a long-term cycle period of ≈795 ± 5 days. We argue that binarity may naturally explain the long-term periodicity in DF Cyg. The spectral energy distribution of DF Cyg features an infrared excess indicative of a disk possibly linked to a binary companion. From a recent Gaia parallax measurement for DF Cyg, we calculated that it has a distance of 990 ± 372 pc and a physical radius of R{sub ⋆}=10.3±3.8 R{sub ⊙}. From kinematics and geometric arguments, we argue that the most likely interpretation for the decrease in flux from the long-period maximum to the long-period minimum, as well as the reduction of the short-term pulsation amplitude, is caused by an occulting body such as a disk surrounding DF Cyg and its binary companion.

79 ASTRONOMY AND ASTROPHYSICS↗

The very unusual ultraviolet spectra of R Arae

The high resolution ultraviolet spectra of the 4.4-day period binary R Arae, observed in 1980 with the International Ultraviolet Explorer, show that its continuum flux level varied outside the eclipse by more than a factor of two in ten days, and by over 50 percent within the same orbital cycle. The flux level varied nonmonotonically at different wavelengths. The resonance lines of Mg II and Si IV exhibited shortward-shifted absorption components near phase 0.4, indicating the presence of a gas stream toward the observer at a velocity of some -450 to -500 km/s. The observations of R Arae with the Einstein satellite show it to be an X-ray source.

Kondo, Y.↗

Measuring the Masses of Magnetic White Dwarfs: A NuSTAR Legacy Survey

The hard X-ray spectrum of magnetic cataclysmic variables can be modelled to provide a measurement of white dwarf mass. This method is complementary to radial velocity measurements, which depend on the (typically rather uncertain) binary inclination. Here we present results from a Legacy Survey of 19 magnetic cataclysmic variables with NuSTAR.We fit accretion column models to their 20–78 keV spectra and derive the white dwarf masses, finding a weighted average M(sub WD) = 0.77 ± 0.02 M(sub ⨀), with a standard deviation σ = 0.10 M(sub ⨀), when we include the masses derived from previous NuSTAR observations of seven additional magnetic cataclysmic variables. We find that the mass distribution of accreting magnetic white dwarfs is consistent with that of white dwarfs in non-magnetic cataclysmic variables. Both peak at a higher mass than the distributions of isolated white dwarfs and post-common-envelope binaries. We speculate as to why this might be the case, proposing that consequential angular momentum losses may play a role in accreting magnetic white dwarfs and/or that our knowledge of how the white dwarf mass changes over accretion–nova cycles may also be incomplete.

Novae↗

Solar Thermal and Geothermal Hybrid Power Plant Study

Over the past couple of decades, the concept of integrating solar thermal energy into a geothermal power plant has been studied and documented in various publications. A new concept, to use concentrated solar thermal energy first in a high pressure steam topping turbine, and then as an additional heat source to the Raft River geothermal binary power plant (GBPP) in Idaho, USA was investigated. The approach yielded an economically attractive design through lower capital cost, higher net output and higher efficiency. An unexpected result was the option to incorporate solar thermal storage into the hybrid cycle for 4 or 8 hours at a cost far below battery storage of electrical energy. U.S. Geothermal Inc. (USGeo), the National Renewable Energy Laboratory (NREL), the Idaho National Laboratory (INL), and POWER Engineers (PEI) worked together to investigate the concept. The study was made possible through a 2017 Small Business Ventures Pilot Program grant, funded by the U.S. Department of Energy (DOE) Geothermal Technologies Office.This article is a high-level summary of a detailed study that is pending publication by INL and NREL, and of a geothermal paper that will be presented at the forthcoming October 2018 GRC Annual Meeting in Reno, Nevada.

15 GEOTHERMAL ENERGY↗

THE ECLIPSING SYSTEM EP ANDROMEDAE AND ITS CIRCUMBINARY COMPANIONS

We present new long-term CCD photometry for EP And acquired during the period 2007-2012. The light curves display total eclipses at primary minima and season-to-season light variability. Our synthesis for all available light curves indicates that the eclipsing pair is a W-type overcontact binary with parameters of q = 2.578, i = 83. Degree-Sign 3, {Delta}T = 27 K, f = 28%, and l{sub 3} = 2%-3%. The asymmetric light curves in 2007 were satisfactorily modeled by a cool spot on either of the eclipsing components from a magnetic dynamo. Including our 95 timing measurements, a total of 414 times of minimum light spanning about 82 yr was used for a period study. A detailed analysis of the eclipse timing diagram revealed that the orbital period of EP And has varied as a combination of an upward-opening parabola and two periodic variations, with cycle lengths of P{sub 3} = 44.6 yr and P{sub 4} = 1.834 yr and semi-amplitudes of K{sub 3} = 0.0100 days and K{sub 4} = 0.0039 days, respectively. The observed period increase at a fractional rate of +1.39 Multiplication-Sign 10{sup -10} is in excellent agreement with that calculated from the W-D code and can be plausibly explained by some combination of mass transfer from the primary to the secondary star and angular momentum loss due to magnetic braking. The most reasonable explanation for both cycles is a pair of light-travel-time effects driven by the possible existence of a third and fourth component with projected masses of M{sub 3} = 0.25 M{sub Sun} and M{sub 4} = 0.90 M{sub Sun }. The more massive companion could be revealed using high-resolution spectroscopic data extending over the course of a few years and could also be a binary itself. It is possible that the circumbinary objects may have played an important role in the formation and evolution of the eclipsing pair, which would cause it to have a short initial orbital period and thus evolve into an overcontact configuration by angular momentum loss.

79 ASTRONOMY AND ASTROPHYSICS↗

Electrical and structural properties of binary Ga–Sb phase change memory alloys

Material properties of Ga–Sb binary alloy thin films deposited under ultra-high vacuum conditions were studied for analog phase change memory (PCM) applications. Crystallization of this alloy was shown to occur in the temperature range of 180–264 °C, with activation energy >2.5 eV depending on the composition. X-ray diffraction (XRD) studies showed phase separation upon crystallization into two phases, Ga-doped A7 antimony and cubic zinc-blende GaSb. Synchrotron in situ XRD analysis revealed that crystallization into the A7 phase is accompanied by Ga out-diffusion from the grains. X-ray absorption fine structure studies of the local structure of these alloys demonstrated a bond length decrease with a stable coordination number of 4 upon amorphous-to-crystalline phase transformation. Mushroom cell structures built with Ga–Sb alloys on ø110 nm TiN heater show a phase change material resistance switching behavior with resistance ratio >100 under electrical pulse measurements. TEM and Energy Dispersive Spectroscopy (EDS) studies of the Ga–Sb cells after ∼100 switching cycles revealed that partial SET or intermediate resistance states are attained by the variation of the grain size of the material as well as the Ga content in the A7 phase. A mechanism for a reversible composition control is proposed for analog cell performance. These results indicate that Te-free Ga–Sb binary alloys are potential candidates for analog PCM applications.

Ume, Rubab (ORCID:0000000324766900)↗

Influence of Asymmetric Cyclic Loading on Structural Evolution and Deformation Behavior of Cu-5 at.% Zr Alloy: An Atomistic Simulation-Based Study

Molecular dynamics (MD) simulation-based studies of tensile test and structural evolution of Cu-5 at.% Zr alloy under asymmetric cyclic loading (i.e., ratcheting behavior) considering various stress ratios such as − 0.2, − 0.4 and − 0.6 for different temperatures, viz.≈ 100, 300 and 500 K have been performed using embedded atom model Finnis–Sinclair potential. According to obtained stress–strain response from MD calculation, Cu-5 at.% Zr alloy specimen is pristine in nature as sudden drop in stress just after yield stress and subsequent elastic type deformation are observed for this alloy. Predicted ratcheting strain by MD simulation for Cu-5 at.% Zr alloy varies from 4.5 to 5%. Significant increase in ratcheting strain has been observed with the increase in temperature. Slight reduction in crystallinity is identified at the middle of the each loading cycle from the performed radial distribution function analysis and cluster analysis.

36 MATERIALS SCIENCE↗

Microstructure, Texture, and Mechanical Properties of Ni-W Alloy After Accumulative Roll Bonding

In this study, the microstructure, texture, and mechanical properties evolution of Ni-14W (wt.%) alloy processed up to four cycles of accumulative roll-bonding (ARB) were investigated using electron backscatter diffraction, microhardness measurements, and tensile tests. The initial equiaxed grains, with an average size of 10 μm, underwent a strong refinement after ARB processing. The elongated ultrafine grains were parallel to the rolling direction, with a grain thickness of 0.2 µm. The texture after ARB processing was characterized by the typical rolling components (Copper, S and Brass), which showed a tendency toward stabilization after four cycles. The microhardness increased substantially (+ 86%) and seemed to saturate after three cycles. The tensile tests demonstrated that Ni-14W samples subjected to ARB processing exhibited high strength (> 1200 MPa after three ARB cycles) and very poor ductility.

36 MATERIALS SCIENCE↗

Air-Cooled Condensers for Next Generation Geothermal Power Plants (Final Report)

This report summarizes the efforts performed under the ARRA project “Air-Cooled Condensers in Next Generation Conversion Systems”. This project examined technologies that provide near-term improvements to the performance of binary power plants utilizing air-cooled condensers. The motivation for pursuing these improvements is to reduce the power generation costs for enhanced geothermal system (EGS) resources. The study is based on two premises. • Water will not be readily available, and there will be no consumptive use of it in the surface energy conversion system. • The EGS resources utilized for power production will be at greater depths, requiring expensive wells to access the heat. In addition, these resources will have costs associated with the creation of the subsurface reservoir where heat that powers the energy conversion system is extracted The costs associated with the well field development and EGS reservoir creation provide the impetus for using more efficient energy conversion systems, as well as conversion systems that have higher efficiencies at ‘off-design’ conditions. In identifying the more efficient conversion systems, this work focused on: • Existing technologies with the potential to increase conversion efficiency. These are commercially available technologies that are not typically used in plants operating on hydrothermal resources • Design strategies to increase plant output during operation at higher ambient temperatures, as wells as at ‘off-design’ conditions (operation at resource and ambient temperatures other than those for which the plant was designed) • The feasibility of using mixed working fluids in binary plants using air-cooled condensers. Mixtures have been shown to have the potential to increase binary plant performance by 10% to 20%.

15 GEOTHERMAL ENERGY↗