Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “attribute measurement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Validation of Remotely Sensed and Modeled Soil Moisture at Forested and Unforested Sites

Soil moisture is an important driver for forest ecosystems, influencing fire occurrence and extent, insect and pathogen impacts, and tree growth, which creates a need for regular, globally extensive soil moisture information that only satellite-based sensors or models can achieve. However, the reliability of soil moisture measurements in forests is not well understood due to a lack of suitable validation sites (especially relative to unforested ecosystems) and interference caused by high vegetation water content on remotely sensed measurements; although recent studies have started to address this gap [1], [2], [3], [4]. Here we validate the performance of multiyear remotely sensed (SMAP/Sentinel), remotely sensed data assimilation modelled (SMAP-L4), and modelled (NLDAS) surface and root zone (0-1 m) soil moisture datasets with data from in-situ sensors at 39 National Ecological Observatory Network (NEON) sites throughout the contiguous US. Due to differences in spatial resolution, NEON soil moisture (~0.2 km measurement zone) correlations were expected to be stronger with the SMAP/Sentinel product (3 km resolution) than with coarser resolution SMAP-L4 (9 km resolution) or NLDAS products (13 km resolution). However, given the sensitivity of satellite measurements to vegetation water content we expected a deterioration in the correlations based on remotely sensed measurements (SMAP/Sentinel and SMAP-L4) as aboveground biomass increased, whereas the model-based data (NLDAS) was expected to be largely insensitive to vegetation type. We recognize that the SMAP/Sentinel product was developed for unforested regions, therefore our application is outside its primary use case. Soil moisture is measured at up to 8 depths in five soil plots spaced up to 40 m apart at each NEON terrestrial site. Correlation parameters were calculated for the three remotely sensed and modelled data products relative to in-situ measurement following Entekhabi et al. [5]. The datasets comprised 94 (SMAP-L4), 28 (SMAP/Sentinel), and 106 (NLDAS) sites-years for surface soils and 13 (SMAP-L4) and 14 (NLDAS) site-years for the root zone. At unforested sites, the performance of the three remotely sensed and modelled data products was similar for surface soils (Table 1). For example, unbiased RMSD (ubRMSD), which SMAP uses as its primary performance metric [6], ranged from 0.05 to 0.06 m3 m-3 (Table 1), indicating the ability of all three products to track changes in soil moisture over time. The performance of the three products deteriorated at forested sites, however, while the difference in performance was modest for SMAP-L4 and NLDAS, the deterioration in SMAP/Sentinel performance was substantial. For instance, SMAP/Sentinel ubRMSD increased from 0.06 to 0.11 m3 m-3 and absolute mean difference (Abs MD; which includes measurement bias and spatial representativeness errors) increased from 0.06 to 0.16 m3 m-3, indicating both a reduction in ability to track temporal changes and absolute amounts of soil moisture in forest ecosystems. SMAP-L4 and NLDAS had lower unbiased RMSD for root zone (0-1 m) than surface soils at both forested and unforested sites (Tables 1 and 2; SMAP/Sentinel does not produce a root zone measurement). However, in most cases the correlation coefficient (r) was lower for the root zone than surface soils, suggesting the lower unbiased RMSD may be attributed to greater temporal stability of soil moisture in the root zone rather than improved data product performance. Mean difference and absolute mean difference, which encompass measurement bias and spatial representativeness errors, were greater for root zone than surface soils at unforested sites for both data products, but the opposite was generally true at forested sites. As with surface soils, there was relatively little change in the performance of SMAP-L4 and NLDAS between the unforested and forested sites. In summary, all three data products were able to adequately represent soil moisture at unforested sites, at least when aggregating across sites. However, while the performance of all three products deteriorated at forested sites, SMAP-L4 and NLDAS maintained sufficient performance to remain suitable for some use cases (ubRMSD <0.06 m3 m-3 and RMSD <0.13 m3 m-3). In contrast, the relatively poorer performance of the SMAP/Sentinel product at forested sites seems insufficient for most use cases (ubRMSD >0.1 m3 m-3 and RMSD >0.2 m3 m-3). We attribute the large reduction in the performance of the SMAP/Sentinel product in forests to its use of C-band wavelengths, which are particularly sensitive to vegetation interference, and apparently outweighed any gains provided by its higher spatial resolution. A combined SMAP/NISAR soil moisture product may provide improved performance relative to SMAP/Sentinel due to NISAR’s use of L-band wavelengths, which are less sensitive to vegetation (NISAR is scheduled for launch in early 2024).

Edward Ayres↗
NASA NTRSDate not supplied

The Additive Manufacturing Moment Measure - A Parallel Computation Technique for Determining Build Variance in the Laser Powder Bed Fusion Process

Additive manufacturing (AM) has unique process attributes that facilitate the creation of optimized, complex, and unique parts for aerospace applications. However, the multi-scale and complicated building process for AM parts can cause unexpected build conditions that result in microstructural variability within the deposited material. The need for richer datasets and computational modeling capabilities to improve AM process reliability is a consequence of this microstructural variability. A computational approach, referred to as the Additive Manufacturing Moment Measure (AM3), addresses this need by leveraging the way AM processes fuse material in precise, incremental steps. During the layering sequence, each previous step contributes to the condition of the current step at the center of the heat source. The precise steps can be selected to systematically create a time-space point field with co-located machine input and in-situ sensor data. The sequential nature of the AM process, coupled with nearest neighbor calculations, allows for a fully parallel computation for part-scale build profile analysis. The AM3 concept introduced here enables part-scale assessment directly from build files and in-situ process monitoring sensors alike. The AM moment measures were calculated for build point fields and compared with co-located in-situ and ex-situ nondestructive evaluation and optical microscopy observations. These comparisons permit a better understanding of how the sequential process actions can affect the quality of a laser powder bed fusion (LPBF) build. Details of the AM3technique will be discussed and compared to measured LPBF part characteristics. The AM3 results indicate a strong potential to advance the qualification process for aerospace applications.

Additive Manufacturing↗
NASA NTRS1974

Solidification of NaCl-NaF eutectic in space

Continuous and discontinuous NaF fibers, embedded in a NaCl matrix, have been produced in space and on earth, respectively. The production of continuous fibers in a eutectic mixture was attributed to the absence of convection current in the liquid during solidification in space. Image transmission and optical transmittance measurements of transverse sections of the space-grown and earth-grown ingots were made with a light microscope and a spectrometer. It was found that better optical properties were obtained from samples grown in space. This was attributed to a better alignment of NaF fibers along the ingot axis.

Yue, A. S.↗
NASA NTRS1976

Zero-gravity growth of NaF-NaCl eutectics in the NASA Skylab program

Continuous and discontinuous NaF fibers, embedded in a NaCl matrix, were produced in space and on earth. The production of continuous fibers in a eutectic mixture is attributed to the absence of convection current in the liquid during solidification in space. Image transmission and optical transmittance measurements of transverse sections of the space-grown and earth-grown ingots were made with a light microscope and a spectrometer. It is shown that better optical properties were obtained from samples grown in space. This was attributed to a better alignment of NaF fibers along the ingot axis. A new concept is advanced to explain the phenomenon of transmittance versus far infrared wavelength of the directionally solidified NaCl-NaF eutectic in terms of the two-dimensional Bragg Scattering and the polarization effect of Rayleigh scattering. This concept can be applied to other eutectic systems as long as the index of refraction of the matrix over a range of wavelengths is known. Experimental data are in agreement with the theoretical prediction.

Yue, A. S.↗
NASA NTRS1977

Zero-gravity growth of NaCl-LiF eutectic. Experiment MA-131

Continuous and discontinuous lithium fluoride fibers embedded in a sodium chloride matrix were produced in space and on earth, respectively. The production of continuous fibers in an eutectic mixture was attributed to the absence of convection current in the liquid during solidification in space. Image transmission and optical transmittance measurements of transverse sections of the space-grown and earth-grown ingots were made with a light microscope and a spectrometer. It was found that better optical properties were obtained from samples grown in space. This was attributed to a better alignment of lithium fluoride fibers along the growth direction.

Yue, A. S.↗
NASA NTRS1982

Zero-gravity growth of a sodium chloride-lithium fluoride eutectic mixture

Continuous and discontinuous lithium fluoride fibers embedded in a sodium chloride matrix were produced in space and on Earth, respectively. The production of continuous fibers in a eutectic mixture was attributed to the absence of convective current in the liquid during solidification in space. Image transmission and optical transmittance measurements of transverse sections of the space-grown and Earth-grown ingots were made with a light microscope and a spectrometer. It was found that better optical properties were obtained from samples grown in space. This was attributed to a better alignment of lithium fluoride fibers along the growth direction.

Yue, A. S.↗
NASA NTRS1988

Latitudinal variation of thermospheric hydrogen near solstice from AE-D observations

Variations of thermospheric neutral atomic hydrogen with latitude during a solstice season near solar minimum were investigated using data acquired with the polar-orbiting AE-D satellite. Hydrogen concentrations at low latitude were found to be comparable to those found from observations with the AE-E satellite, but were slightly higher than concentrations derived from the 1983 mass spectrometer incoherent scatter atmospheric model. Results confirm the general summer-to-winter density increase, large latitudinal gradients in the summer hemisphere, and the winter enhancement of hydrogen observed in AE-C nighttime measurements. The AE-D data, however, show a small polar depression in hydrogen concentration at high winter latitudes, attributed to atmospheric dynamics following auroral heating. The density gradients observed by AE-D in the summer hemisphere were in sharp contrast to the more constant horizontal daytime profiles reported from OGO-6 and previous AE-C measurements, indicating the possibility of local time effects.

Sanatani, S.↗
NASA NTRS1990

Radiative transfer in cirrus clouds from airborne flux and microphysical measurements during FIRE 86

Microphysical and radiation measurements from three case studies during FIRE 86 are presented and analyzed. Calculated solar and infrared flux profiles are compared to measured flux values for the studies. The flux comparison shows that the modeled cirrus cloud underestimates cloud extinction, especially near the cloud base, where modeled extinctions are largest. The large downward solar attenuation near the cloud base cannot be matched, while the modeled solar reflection is too small. Most of this difference is attributed to an underestimation of cloud optical depth in the model. Modeling difficulties and difficulties in the measurements are discussed. It is proposed that, in order to assure a more useful flux comparison, field experiment set-ups and instrumentation as well as the modeling of cirrus clouds need to be improved.

Kinne, S.↗
NASA NTRS1971

The stopping rate of negative cosmic-ray muons near sea level

A production rate of 0.065 + or - 0.003 Ar-37 atom/kg min of K-39 at 2-mwe depth below sea level was measured by sweeping argon from potassium solutions. This rate is unaffected by surrounding the solution by paraffin and is attributed to negative muon captures and the electromagnetic interaction of fast muons, and not to nucleonic cosmic ray component. The Ar-37 yield from K-39 by the stopping of negative muons in a muon beam of a synchrocyclotron was measured to be 8.5 + or - 1.7%. The stopping rate of negative cosmic ray muons at 2-mwe depth below sea level from these measurements and an estimated 17% electromagnetic production is 0.63 + or - 0.13 muon(-)/kg min. Previous measurements on the muon stopping rate vary by a factor of 5. Our value is slightly higher but is consistent with two previous high values. The sensitivity of the Ar-37 radiochemical method for the detection of muons is considerably higher than that of the previous radiochemical methods and could be used to measure the negative muon capture rates at greater depths.

Spannagel, G.↗
NASA NTRSDate not supplied

Evaluating CERES TOA Fluxes using ARISE aircraft observations

Uncertainty in observations of top-of-atmosphere (TOA) radiation fluxes are larger in the Arctic than in other regions. The magnitude of these uncertainties limit our understanding of the Arctic surface energy budget and its variability. The significant uncertainties are due to the low sun angles and wide range of highly reflecting, anisotropic, and highly heterogeneous surface conditions. Therefore, quantifying, attributing, and reducing Arctic TOA radiative flux uncertainty enables a better understanding of the rapidly changing Arctic. To advance this goal, we compare the Cloud and Earth’s Radiant Energy System (CERES) TOA radiative fluxes with measurements from the Arctic Radiation-IceBridge Sea and Ice Experiment (ARISE) flow in September 2014. A key objective of ARISE was to evaluate and attribute uncertainty in CERES footprint and gridded TOA radiative fluxes. In this study, we first compare the CERES TOA flux with those obtained from the broadband radiometer measurements from the aircraft using instantaneously matched footprint with the flight track and as the hourly gridded fluxes. This comparison indicates an agreement within uncertainty in the longwave (2 Wm-2 ) for all five grid boxes and agreement in the shortwave (10 Wm-2) for four-out-of-five grid boxes. While not a statistically significant results given the small sample size, the hourly, gridded and the instantaneously matched footprint comparison suggest a -10 Wm-2 bias for CERES in the shortwave. To explore whether this is a robust feature or a statistical artifact, we quantify the individual sources of uncertainty in the differences (temporal and spatial sampling differences, scene evolution, accuracy, angular distribution models, and scene id) to see if any of these differences account for the shortwave bias.

CERES↗
NASA NTRS1976

Isotopic composition of nitrogen - Implications for the past history of Mars' atmosphere

Models are presented for the past history of nitrogen on Mars, based on Viking measurements showing that the atmosphere is enriched in N-15. The enrichment is attributed to selective escape, with fast atoms formed in the exosphere by electron impact dissociation of N2 and by dissociative recombination of N2(+). The initial partial pressure of N2 should have been at least as large as several millibars and could have been as large as 30 millibars if surface processes were to represent an important sink for atmospheric HNO2 and HNO3.

Mcelroy, M. B.↗
NASA NTRS1977

Formulation of electrically conductive, thermal-control coatings

Formulation of electrically conductive, thermal-control coatings was undertaken for use on the International Sun Earth Explorer (ISEE) spacecraft. Unsuccessful formulation efforts as well as the successful use of oxide pigments fired at 1175 C are described. Problems attributed to reactivity of specific coating vehicles exposed to high humidity are discussed. Measurement and testing methods, including resulting data are mentioned, but the emphasis, in this report, is placed on coating formulation and application techniques. Methods of varying, as desired, optical properties are also described as well as formulations of white, low-absorptance coatings.

Shai, M. C.↗
NASA NTRS1981

Turbomachinery noise studies of the AiResearch QCGAT engine with inflow control

The AiResearch Quiet Clean General Aviation Turbofan engine was tested on an outdoor test stand to compare the acoustic performance of two inflow control devices (ICD's) of similar design, and three inlet lips of different external shape. Only small performance differences were found. Far-field directivity patterns calculated by applicable existing analyses were compared with the measured tone and broadband patterns. For some of these comparisons, tests were made with an ICD to reduce rotor/inflow disturbance interaction noise, or with the acoustic suppression panels in the inlet or bypass duct covered with aluminum tape to determine hard wall acoustic performance. The comparisons showed that the analytical expressions used predict many directivity pattern features and trends, but can deviate in shape from the measured patterns under certain engine operating conditions. Some patterns showed lobes from modes attributable to rotor/engine strut interaction sources.

Mcardle, J. G.↗
NASA NTRS1984

Lunar luminescence and the filling-in of Fraunhofer lines in moonlight

The filling-in of Fraunhofer lines in moonlight has been attributed to lunar luminescence. In order to test mechanisms proposed for this effect, measurements were made of the filling-in of the H-alpha line, the Na D doublet, and a number of lines near the doublet. The degree of filling-in was not correlated with wavelength in a way expected from a broadband luminescence, such as thermoluminescence. However, it was correlated with equivalent width of the Fraunhofer line, such that it increased as equivalent width decreased. This suggests that the Fraunhofer line filling at the moon's surface is caused by inelastic scattering of sunlight with a small wavelength shift, as for example, photon-phonon scattering.

Potter, A. E.↗
NASA NTRS1987

Effects of aerosols and surface shadowing on bidirectional reflectance measurements of deserts

Desert surfaces are probably one of the most stable of the Earth's natural targets for remote sensing. The bidirectional reflectance properties of the Saudi Arabian desert was investigated during the Summer Monsoon Experiment (Summer Monex). A comparison of high-altitude with near-surface measurements of the White Sands desert showed significant differences. These discrepancies have been attributed to forward scattering of the dust-laden atmosphere prevalent during Summer Monex. This paper is concerned in general with modeling the effects of atmospheric aerosols and surface shadowing on the remote sensing of bidirectional reflectance factors of desert targets, and in particular with comparing the results of these models with flight results. Although it is possible to approximate the latter, it is felt that a surface reflectance model with a smaller specular component would have permitted using a more realistic set of atmospheric conditions in the simulations.

Bowker, David E.↗
NASA NTRS1986

Projection-operator calculations of the lowest e(-)-He resonance

The 1s (2s)2:2S Schulz resonance of He(-) is investigated theoretically, applying the full projection-operator formalism developed by Temkin and Bhatia (1985) in a Rayleigh-Ritz variational calculation. The technique is described in detail, and results for five different approximations of the He target state are presented in a table. Good convergence is obtained, but it is found that even the best calculated value of the resonance is about 130 meV higher than the experimentally measured value of 19.367 + or - 0.007 eV (Brunt et al., 1977), a discrepancy attributed to the contribution of the shift in the Feshbach formalism.

Berk, A.↗
NASA NTRS1988

Temperature-dependent absorption cross sections for hydrogen peroxide vapor

Relative absorption cross sections for hydrogen peroxide vapor were measured over the temperature ranges 285-381 K for lambda = 230 nm-295 nm and 300-381 K for lambda = 193 nm-350 nm. The well established 298 K cross sections at 202.6 and 228.8 nm were used as an absolute calibration. A significant temperature dependence was observed at the important tropospheric photolysis wavelengths lambda over 300 nm. Measured cross sections were extrapolated to lower temperatures, using a simple model which attributes the observed temperature dependence to enhanced absorption by molecules possessing one quantum of O-O stretch vibrational excitation. Upper tropospheric photodissociation rates calculated using the extrapolated cross sections are about 25 percent lower than those calculated using currently recommended 298 K cross sections.

Nicovich, J. M.↗
NASA NTRS1988

Spacelab 1 experiments on interactions of an energetic electron beam with neutral gas

An unusual signature of return current and spacecraft charging potential was observed during the Spacelab 1 mission launched on November 28, 1983. The phenomenon occurred during neutral gas releases from the SEPAC (Space Experiments with Particle Accelerators) magnetoplasma-dynamic arcjet (MPD) concurrent with firings of the PICPAB (Phenomena Induced by Charged Particle Beams) electron gun and was recorded by the instruments of the SEPAC diagnostic package (DGP). Data from the langmuir probe, floating probes, neutral gas pressure gauge, and the plasma wave probes are reported. As the dense neutral gas was released, the return current measured by the langmuir probe changed from positive to negative and a positive potential relative to the spacecraft was measured by the floating probe. The anomalous return current is believed to be attributable to secondary electron fluxes escaping from the spacecraft, and the unusual charging situation is attributed to the formation of a double-layer structure between a hot plasma cloud localized to the MPD and the spacecraft. The charging scenario is supported by a computer simulation.

Marshall, J. A.↗