Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “atomic resolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Comments on the observability of coronal variations

The observable variability of spectral lines in the soft X-ray and XUV region is discussed. Rapid variability of coronal emission, both in flaring and non-flaring structures, has been reported and is particularly prominent when high spatial resolution is available. Examination of the ionization and recombination time-scales for the formation and removal of ions with prominent solar emission lines shows that, even though ionization equilibrium generally prevails, the observable variability time-scales are often limited by these atomic processes, independent of the physical process which is causing the change in the solar atmosphere. Future observations of Mg X 609 A should be augmented by simultaneous observation at another wavelength, such as 63 A. In addition, with the ability to produce images in isolated spectral lines it becomes possible to select those for which rapid variability is observable, such as O VII, rather than lines which were selected on the basis of previous hardware constraints, such as O VIII.

Golub, L.↗
NASA NTRS1992

Lidar measurements using large liquid mirror telescopes

It is a well accepted practice in the discussion of lidars to compare systems by a performance factor given by the product of the transmitter power and receiver aperture. This form of the performance factor reflects the two key parameters that determine the amount of photons recorded from a given range bin; the amount of transmitted photons and the probability of collecting a scattered photon. We are interested in studying the propagation and breaking of gravity waves typically generated in the lower atmosphere. To study these waves requires high temporal and spatial resolution, as they have frequencies as high as 500 mHz and generate turbulent structures with vertical scales of less than 25 m. In the 80 - 100 km region of the atmosphere these measurements are most efficiently obtained by using resonance scattering from sodium atoms deposited by meteors. However, in the 30 - 80 km region, the most efficient scattering arises from molecules (Rayleigh scattering). Since the atmospheric scale height is nominally 7 km, this scattering becomes extremely weak above 60 km. Furthermore, present laser technology limits the power available for Rayleigh-scattering experiments to about 0.5 - 50 W. The transmitter for the lidar system under development at the University of Western Ontario uses a two-beam transmitter to simultaneously measure density perturbations and temperature from both Rayleigh and resonance scattering.

Sica, R. J.↗
NASA NTRS1993

Primary results from the Berkeley EUV airglow rocket spectrometer: O I and N2 FUV/EUV dayglow in the thermosphere and lower exosphere

The Berkeley extreme-ultraviolet airglow rocket spectrometer (BEARS) made spectroscopic measurements of far and extreme UV, atomic oxygen emissions from a Black Brandt XII (12.041 WT) sounding rocket launched from Wallops Island, Virginia, on September 30, 1988. BEARS' primary instrument, a near-normal Rowland mount spectrometer, measured several atomix oxygen and molecular nitrogen dayglow features at high spectral resolution (1.5 A): O I (989, 1027, 1304, and 1356 A); and N2 Lyman-Birge-Hopfield (4, 0) and (3, 0) bands at 1325 and 1354 A. The instrument collected over 800 s of data spanning altitudes of 150 - 963 km with look directions between 95 deg and 125 deg from zenith. We have analyzed the data using electrons and radiative transport models in a forward modeling approach. The model and data are generally in good agreement. However, there are some discrepancies, which are discussed in terms of remote sensing capabilities and improvements to the models.

Cotton, Daniel M.↗
NASA NTRS2018

Segregation and Phase Transformations Along Superlattice Intrinsic Stacking Faults in Ni-Based Superalloys

In this study, local chemical and structural changes along superlattice intrinsic stacking faults combine to represent an atomic-scale phase transformation. In order to elicit stacking fault shear, creep tests of two different single crystal Ni-base superalloys, ME501 and CMSX-4, were performed near 750 degrees Centigrade using stresses of 552 megapascals and 750 megapascals, respectively. Through high resolution Scanning Transmission Electron Microscopy (STEM) and state-of-the-art energy dispersive x-ray spectroscopy, ordered compositional changes were measured along SISFs (Superlattice Intrinsic Stacking Faults) in both alloys. For both instances, the elemental segregation and local crystal structure present along the SISFs are consistent with a nanoscale to D019 (ordering of a hexagonal close-packed crystal) phase transformation. Another notable observation is prominent Cr- and Co-rich Cottrell atmospheres and new evidence of more complex reordering processes responsible for the formation of these faults. These findings are further supported using density functional theory calculations and High Angle Annular Dark Field (HAADF) STEM image simulations.

STEM-EDS↗
NASA NTRSDate not supplied

Overview of the MISSE-16 Mission and Preliminary Characterization of Novel Space Weathered Materials

The Materials International Space Station Experiment (MISSE) project is a series of experiments that began in 2001, involving the deployment of external experiment platforms on the International Space Station (ISS). Since then, more than 4,000 materials were tested yielding valuable data and insights into the performance of materials and coatings in the harsh space environment, as well as providing a platform for testing and validating new materials and technologies. The results of the MISSE experiments have contributed to the development of more durable and reliable spacecraft and equipment, as well as improving our understanding of the space environment and its effects on human space exploration. To gain deeper insights into the changes in material properties of both novel and heritage spacecraft materials over the course of a mission, we proposed to enhance the MISSE hardware. This was achieved by integrating a high-resolution camera that can capture both RGB and IR color data, along with an updated illumination scheme. The identical sets of selected materials were mounted on the Zenith, Ram, and Wake faces of the ISS to expose them to predominant vacuum ultraviolet (VUV), atomic oxygen, and high-energy electron conditions. In addition, we exposed flight duplicates of these materials to a simulated space environment, which included sequential exposure to the same irradiation species on the ground. This allowed us to study the effects of space exposure on the materials in a controlled manner and to compare their behavior in both real and simulated space environments. The MISSE-FF flight sample collection comprised different classes of polymers, including polyimides from the Kapton family, manufactured by E.I du Pont de Nemours and Co., Polyethylene terephthalate (PET) materials, liquid crystal polymers, PI/Polyhedral Oligomeric Silsesquioxanes (POSS), and carbon and glass fiber reinforced polymers. The experimental cadence during the MISSE-16 mission (~6 months) included daily images of each sample for the first week, weekly for the next 2 months, and monthly the remaining duration of the mission. This paper will focus on the flight duplicate as well as the postflight optical characterization of novel and heritage materials currently under observation on the MISSE-FF.

Jainisha R Shah↗
NASA NTRS1980

A thermalized ion explosion model for high energy sputtering and track registration

A velocity spectrum of neutral sputtered particles as well as a low resolution mass spectrum of sputtered molecular ions was measured for 4.74 MeV F-19(+2) incident of UF4. The velocity spectrum is dramatically different from spectra taken with low energy (keV) bombarding ions, and is shown to be consistent with a hot plasma of atoms in thermal equilibrium inside the target. A thermalized ion explosion model is proposed for high energy sputtering which is expected to describe track formation in dielectric materials. The model is shown to be consistent with the observed total sputtering yield and the dependence of the yield on the primary ionization rate of the incident ion.

Seiberling, L. E.↗
NASA NTRS1986

Spectral measurement of the Space Shuttle leeside shock layer and wake

Leeside shock layer and wake spectral radiation measured during the high altitude portion of the reentry of Space Shuttle Orbiter STS 51-D are presented and are compared with similar measurements obtained in an arc jet tunnel. The spectra, measured with a low-resolution spectral camera, are compared in order to identify the radiating species in a wavelength range from 4000 to 8000 angstroms. Emissions identified are: N2 first positive and N2 second positive systems, the N2(+) first negative system, and the sodium-D lines. No atomic air species or CN are observed. The spectra and procedure will be of use in comparison of flight flowfield properties with computational predictions and for guidance in developing future flight experiments.

Blackwell, H. E.↗
NASA NTRS1989

Nitrogen abundances from UV lines of HgMn and standard late-B stars

A recent survey by Roby (1987) discovered that the relatively weak high excitation lines of N 1 near 7468 and 8680 A were undetectable in the majority of HgMn stars, leading to upper limits on the N abundance of roughly ten times below that of the solar N abundance. Standard stars with similar temperatures (10,000 to 13,000 K) did exhibit these same N lines and were found to have roughly solar N abundances. The N abundances were redetermined in two HgMn stars and four standard stars using the strong, low excitation lines of N 1 found in the ultraviolet. The observational data consisted of high quality, high resolution, co-added International Ultraviolet Explorer spectra which was previously collected and reduced. Examination of the spectra plus considerations of signal/noise and severe line blending led to the choice of three promising N 1 lines located at 1742.7, 1745.3 and 1411.9 A. The atomic data for these lines were previously calculated using the best laboratory measurements found in a search of the relevant literature. The chosen N lines turned out to be blended significantly with Fe 2 lines. To obtain the abundances for N synthetic spectra were computed to match the observed spectra. The synthetic spectra were calculated using lie-blanketed model atmospheres, stellar parameters, and abundances for the other elements based upon previous work by S. Adelman. The N abundance was then adjusted to give the best fit of the observed line profiles. In the 2 HgMn stars, the N lines were again found to be undetectable, but the stronger intrinsic strength of the new lines yield more stringent upper limits than those obtained previously. Model atmosphere and abundances were updated in two stars where new results were reported. An additional N 1 line and an additional standard star were added to the program. A line opacity model was developed for a missing feature adjacent to the N 1 line at 1745.2 A, leading to a 25 percent improvement in the determined from this line.

Roby, Scott W.↗
NASA NTRS1993

The hydrogen Lyman-alpha emission of Capella

We describe the hydrogen Ly-alpha emission of the spectroscopic binary Capella (G8 III + GO III) recorded at 0.1 A resolution by the International Ultraviolet Explorer. The overt changes in the composite line shape with orbital phase are controlled by the active GO III star and permit a dissection of the stellar components despite the obliteration of the central portion of the profile by atomic hydrogen and deuterium absorption along the 12.5 pc sightline. The Ly-alpha line shape of the active GO III star is surprisingly asymmetric and possibly is variable. Both characteristics suggest a stellar wind of moderate excitation (20,000-100,000 K), a key component of the coronal evolution scenario of Simon and Drake (1989) for the Hertzsprung-gap giants.

Ayres, Thomas R.↗
NASA NTRS1994

VUV shock layer radiation in an arc-jet wind tunnel experiment

Measurements were made of the radiating gas cap of a blunt body in a NASA-Ames 20 MW arc-jet wind tunnel. The test gas was air. Spectra of the flux incident on a small aperture centered at the stagnation region were obtained. A helium-cooled, magnesium fluoride window transmitted the flux into an evacuated collimating system that focused the aperture onto the entrance slit of a spectrometer. Data were obtained with films and by photomultipliers. The spectral ranges covered were the vacuum ultraviolet, VUV, (120 nm to 200 nm) and the ultraviolet to near infrared (200 nm to 900 nm) with resolutions from 0.05 nm to 0.5 nm. This paper presents the preliminary VUV results from the experiment. Results from the 200 nm to 900 nm spectral range have been presented elsewhere. Representative spectral records from 120 nm to 200 nm are shown. The intense atomic oxygen and nitrogen lines which are of concern to hypersonic flight are measured. Carbon lines are are also seen. These results will be used to help develop and validate aerothermodynamic computational models of arc-jet wind tunnel performance and help to assess the importance of VUV heating to entering spacecraft.

Craig, Roger A.↗
NASA NTRS2017

Introduction: Photons and Ground-Based

A Conference on Measurement Techniques for Solar and Space Physics was held on 20-24 April 2015 in Boulder, Colorado, at the National Center for Atmospheric Research Center Green Campus. The present volume collects together the conference papers for photons and ground-based categories. This gathering of over 200 scientists and instrumentalists was born out of the desire to collect in one place the latest experiment and instrument technologies required for advancement of scientific knowledge in the disciplines of solar and space physics. The two goals for this conference and the subsequent publication of its content are (a) to describe measurement techniques and technology development needed to advance high priority science in the fields of solar and space physics; and (b) to provide a survey or reference of techniques for in situ measurement and remote sensing of space plasmas. Towards this end, our goal has always been inspired by the two 1998 Geophysical Monographs (Nos. 102 and 103) entitled, "Measurement Techniques in Space Plasmas" (particles and fields) [Pfaff et al., 1998a, 1998b], which have served as a reference and resource for advanced students, engineers, and scientists who wish to learn the fundamentals of measurement techniques and technology in this field. Those monographs were the product of an American Geophysical Union Chapman Conference that took place in Santa Fe, NM, in 1995: "Measurement Techniques in Space Plasmas-What Works, What Doesn't." Two decades later, we believe that it is appropriate to revisit this subject, in light of recent advances in technology, research platforms, and analysis techniques. Moreover, we now include direct measurements of neutral gases in the upper atmosphere, optical imaging techniques, and remote observations in space and on the ground. Accordingly, the workshop was organized among four areas of measurement techniques: particles, fields, photons, and ground-based. This two-set volume is largely composed of the content of that workshop. Special attention is given to those techniques and technologies that demonstrate promise of significant advancement in measurements that will enable the highest priority science as described in the 2012 National Research Council Decadal Survey [Baker and Zurbuchen et al., 2013]. Additionally, a broad tutorial survey of the current technologies is provided to serve as reference material and as a basis from which advanced and innovative ideas can be discussed and pursued. Included are instrumentation and techniques to observe the solar environment from its interior to its outer atmosphere, the heliosphere out to the interstellar regions, in geospace, and other planetary magnetospheres and atmospheres. To make significant progress in priority science as expressed in the National Research Council solar and space physics decadal survey and recent NASA Heliophysics roadmaps, identification of enabling new measurement techniques and technologies to be developed is required. Also, it is valuable to the community and future scientists and engineers to have a complete survey of the techniques and technologies used by the practitioners of solar and space physics. As with the 1995 conference and subsequent 1998 publication, it is incumbent on the community to identify those measurements that are particularly challenging and still require new techniques to be identified and tested to enable the necessary accuracy and resolution of certain parameters to be achieved. The following is a partial list of the measurement technique categories that are featured in these special publications: Particles; Thermal plasma to MeV energetic particles, neutral gas properties including winds, density, temperature, and composition, and enhanced neutral atom imaging; Fields; DC electric and magnetic fields, plasma waves, and electron drift instruments from which the plasma velocity information provides a measure of the DC electric field; Photons; Instruments sensitive from the near-infrared to X-rays; Contributions of techniques and technology for optical design, optical components, sensors, material selection for cameras, telescopes, and spectrographs; Ground based; Remote sensing methods for solar and geospace activity and space weather. The focus includes solar observatories, all-sky cameras, lidars, and ionosphere thermosphere mesosphere observatory systems such as radars, ionosondes, GPS receivers, magnetometers, conjugate observations, and airborne campaigns. The present volume collects together the papers for photons and ground-based categories. The companion volume collects together the papers for particles and fields categories. It is recognized that there are measurement techniques that overlap among the four categories. For example, use of microchannel plate detectors is used in photon and particle measurement techniques or the observation of visible photons and magnetic fields in space and on the ground share common technologies. Therefore, the reader should consider the entire collection of papers as they seek to understand particular applications. We hope that these volumes will be as valuable as a reference for our community as the earlier 1998 volumes have been.

Spann, James↗
NASA NTRSDate not supplied

Mission Concept, Science, and Technology of the PRIMA Astrophysics Probe

PRIMA addresses questions about the origins and growth of planets, supermassive black holes, stars, and dust. Much of the radiant energy from these formation processes is obscured and only emerges in the far infrared (IR) where PRIMA observes (24–261 um). PRIMA’s PI science program (25% of its 5-year mission) focuses on three questions and feeds a rich archival Guest Investigator program: How do exoplanets form and what are the origins of their atmospheres? How do galaxies’ black holes and stellar masses co-evolve over cosmic time? How do interstellar dust and metals build up in galaxies over time? PRIMA provides access to atomic (C, N, O, Ne) and molecular lines (HD, H2O, OH), redshifted PAH emission bands, and far-IR dust emission. PRIMA’s 1.8-m, 4.5-K telescope serves two instruments using sensitive KIDs: the Far-InfraRed Enhanced Survey Spectrometer (continuous, high-resolution spectral coverage with over an order of magnitude improvement in spectral line sensitivity and 3-5 orders of magnitude improvement in spectral survey speed) and the PRIMA Imager (hyperspectral imaging, broadband polarimetry). PRIMA opens new discovery space with 75% of the time for General Observers.

Jason Glenn↗
NASA NTRS1977

Ion-beam-induced atomic mixing

Calculations based on the diffusion model are presented of atomic mixing by ion bombardment. This mixing is assumed to have its basis, as does sputtering, in the collision cascades generated by the primary beam. Sharp interfaces within a target are seen to be smoothed by ion bombardment. Mixing may place fundamental limits on the resolution of ion microprobes.

Haff, P. K.↗
NASA NTRS1985

Constraints on the galactic distribution of cosmic rays from the COS-B gamma-ray data

The diffuse component of the galactic high energy gamma rays results mainly from the interaction of CR nuclei and electrons with the nuclei of the interstellar gas. An additional contribution is obtained from the interaction of CR electrons with the interstellar photons through the inverse-Compton (IC) process. Gamma ray astronomy therefore offers an excellent means to study the distribution of CR particles throughout the Galaxy, but it is essential to know the distribution of the target interstellar gas particles, the major constituents being atomic and molecular hydrogen. Large scale millimeter wave surveys of the CO molecule covering more than half of the Milky Way, obtained with the Columbia 1.2 m telescopes, are currently available and are used to trace the H2; the COS-B observations have sufficient resolution and sensitivity to constrain the relation between the integrated CO line intensity and the molecular hydrogen column density.

Bloemen, J. B. G. M.↗
NASA NTRS1993

Goddard high-resolution spectrograph observations of the local interstellar medium and the deuterium/hydrogen ratio along the line of sight toward Capella

HST Goddard High-Resolution Spectrograph observations of the 1216, 2600, and 2800 A spectral regions are analyzed for the spectroscopic binary system Capella, obtained at orbital phase 0.26 with 3.27-3.57 km/s resolution and high SNR. The column densities of H I, D I, Mg II, and Fe II for the local interstellar medium along this 12.5 pc line of sight, together with estimates of the temperature and turbulent velocity are inferred. It is inferred that the atomic deuterium/hydrogen ratio by number is 1.65(+0.07, -0.18) x 10 exp -5 for this line of sight. Galactic evolution calculations indicate that the primordial D/H ratio probably lies in the range of (1.5-3) x (D/H)LISM. If H0 = 80 km/s Mpc, as recent evidence suggests, then the baryonic density in units of the Einstein-de Sitter closure density is 0.023-0.031. Thus the universe is argued to expand forever, unless nonbaryonic matter greatly exceeds the amount of baryonic matter.

Linsky, Jeffrey L.↗
NASA NTRS1987

Geometrical analysis of Cys-Cys bridges in proteins and their prediction from incomplete structural information

Analysis of C-alpha atom positions from cysteines involved in disulphide bridges in protein crystals shows that their geometric characteristics are unique with respect to other Cys-Cys, non-bridging pairs. They may be used for predicting disulphide connections in incompletely determined protein structures, such as low resolution crystallography or theoretical folding experiments. The basic unit for analysis and prediction is the 3 x 3 distance matrix for Cx positions of residues (i - 1), Cys(i), (i +1) with (j - 1), Cys(j), (j + 1). In each of its columns, row and diagonal vector--outer distances are larger than the central distance. This analysis is compared with some analytical models.

NASA Discipline Exobiology↗
NASA NTRS1988

Imaging and spectroscopy of Comet P/Halley

The goals of this investigation are the analysis of a large set of high-resolution echelle/reticon spectra, and the reduction and analysis of a set of narrow-band-filtered charge coupled device (CCD) images of Comet Halley taken during the preperihelion period at Oak Ridge Observatory by Dr. R. E. McCrosky. The scientific objectives associated with these goals are the determination of the spatial distributions of several important radicals, atoms and ions in the coma. These include C2, CN, C3, H2O(+) and CO(+) from the image data. The analysis of the neutral species distribution with Monte Carlo models will aid in the understanding of their production and decay mechanisms as well as serve as an important indicator of the physical conditions in the inner coma. The spatial distributions of the ions will serve as a guide to constrain the complex model necessary for understanding the interaction of the solar wind and the cometary ions. Work during this past year has been devoted largely to the reduction of the standard star photometry for the CCD image data set, as well as the re-flat-fielding of a number of the comet images. We are pleased to report that despite a number of setbacks and the small effort devoted to this work (2 1/2 months for the PI and a generous share of completely unsupported time by Dr. McCrosky) that this portion of the work has been successfully completed. The goals for the upcoming final year of this project (under a new project number) are to complete the calibration of the CCD image data for inclusion in the IHW archive, to analyze a select portion of the neutral radical images with our Monte Carlo models, and to present the results of the 6300/region spectra as a guide to low-resolution spectral observers in order to yield the unambiguous separation of the contributions of cometary O(1D), airglow O(1D), and the numerous NH2 lines in that region of the spectrum.

Combi, Michael R.↗
NASA NTRS1978

Orbiting Deep Space Relay Station (ODSRS): DSN feasibility study report

Future tracking requirements and advantages over earth based stations justify the design of an orbiting, free flying very long base interferometry system to provide high resolution maps of celestial radio sources. Moderate technology development is required for the following: 30 meter to 60 meter diameter deployable parabolic antennas with less than 2 millimeters surface tolerance; a momentum wheel attitude control system with few arc/second accuracy; solar power design; a hydrogen maser atomic frequency standard; and the cryogenic receivers. The system must meet current Deep Space tracking capabilities as a minimum, and the technology must be compatible with system performance growth in the future. System lifetime must be ten years without major refurbishing.

Thornton, T.↗