Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “amine functionalization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Encapsulation of highly viscous CO 2 capture solvents for enhanced capture kinetics: Modeling investigation of mass transfer mechanisms

The encapsulation of highly viscous liquid-like Nanoparticle Organic Hybrid Materials (NOHMs) inside a gas permeable polymer to form SIPs (Solvent Impregnated Polymers) significantly enhanced the CO 2 capture kinetics of NOHMs, leading to a remarkable 50-fold increase in CO 2 flux compared to the neat NOHMs. To understand the mechanism for enhanced CO 2 mass transfer within these hybrid materials, kinetic modeling of CO 2 uptake into SIPs containing polyethylenimine functionalized NOHMs, denoted NPEI-SIP, was conducted. CO 2 mass transfer into NPEI-SIP films was found to conform, both qualitatively and quantitatively, with a diffusion-controlled moving front model. The diffusion-controlled model was also used to simulate CO 2 uptake within a fixed bed containing polydisperse NPEI-SIP particles, and this model accurately predicted experimentally measured breakthrough curves at 25 °C and 50 °C. The 50-fold increase in gas flux was shown to be a consequence of the very large CO 2 permeability within the polymer–solvent composite. Furthermore, the increase in gas flux is also dependent on the diffusion–reaction regime in which the chemical solvent operates, and the largest improvement will occur when immobilizing solvents, such as NOHMs, which operate in the instantaneous-reaction regime. The CO 2 capacity (~3 mol CO 2 /kg) and saturation time (~5 min) of 430 μm SIP particles were comparable to popular CO 2 chemisorption materials such as amine grafted silicates, in spite of the slow kinetics of NOHM-I-PEI in liquid form (CO 2 saturation time ~24 h for a 1 mm thin film).

36 MATERIALS SCIENCE↗
DOE OSTI2020

Coordination-Induced N–H Bond Weakening in a Molybdenum Pyrrolidine Complex: Isotopic Labeling Provides Insight into the Pathway for H 2 Evolution

The synthesis and characterization of a cationic molybdenum pyrrolidine complex is described that exhibits significant coordination-induced N–H bond weakening. Here, the N–H bond dissociation free energy (BDFE) of the coordinated pyrrolidine in [( Ph Tpy)(PPh 2 Me) 2 Mo(NH(pyrr))][BArF 24 ] ([1-NH(pyrr)] + ; PhTpy = 4'-Ph-2,2',6',2''-terpyridine, NH(pyrr) = pyrrolidine, ArF 24 = [C 6 H 3 -3,5-(CF 3 ) 2 ] 4 ) was determined to be between 41–51 kcal mol -1 by thermochemical analysis and supported by a density functional theory (DFT) computed value of 48 kcal mol -1 . The complex [1-NH(pyrr)] + underwent proton-coupled electron transfer (PCET) to 2,4,6-tri-tert-butylphenoxyl radical, as well as spontaneous H 2 evolution upon gentle heating to furnish the corresponding molybdenum pyrrolidide complex, [( Ph Tpy)(PPh 2 Me) 2 Mo(N(pyrr))][BArF 24 ] ([1-N(pyrr)] + ). Thermolysis of the deuterated isotopolog, [1-ND(pyrr)] + still produced H 2 with concomitant incorporation of the isotopic label into the pyrrolidide ligand in the product [(1-N(pyrr-d n )] + (n = 0–2), consistent with an H 2 evolution pathway involving intramolecular H–H bond formation followed by an intermolecular product-forming PCET step. These observations provide context for understanding H 2 evolution in the nonclassical ammine complex [( Ph Tpy)(PPh 2 Me) 2 Mo(NH 3 )][BArF 24 ] ([1-NH 3 ] + ) and are supported by DFT-computed reaction thermochemistry. Overall, these studies offer rare insight into the H 2 formation pathway in nonclassical amine complexes with N–H BDFEs below the thermodynamic threshold for H 2 evolution and inform the development of well-defined, thermody-namically potent PCET reagents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Self‐Limiting Polymerization‐Induced Crystallization‐Driven Self‐Assembly (SL‐PI‐CDSA) Enables Templated Synthesis of Chiral Plasmonic, Hybrid 2D Hexagonal Assemblies

Examples of self-regulating synthetic self-assembly are relatively few, with most known chemical systems relying on kinetic rather than thermodynamic control. Herein, we demonstrate the rapid generation (t ≤ 5 min) of size-tunable ultralow dispersity (Ð ≤ 1.01) 2D hexagonal nanosheets governed by self-limiting self-assembly (SLSA). Self-assembly in natural systems occurs with exquisite control of structure, function, and dimension. We demonstrate that key aspects of biological assembly can be rationally applied toward the development of bottom-up approaches for the construction of chiral nanomaterials. To this end, self-limiting polymerization-induced crystallization-driven self-assembly (SL-PI-CDSA) of modular and templating aryl isocyanide (AIC) monomers yields functional 2D assemblies permitting post-polymerization/assembly modifications. Detailed study of the internal and external structure of the hexagonal nanosheets reveals topological defects which offer mechanistic insights into both their assembly and subsequent utilization. Specifically, these features enable fabrication of chiral hybrid organic–inorganic nanomaterials incorporating chiral plasmonic metal nanoparticles (MNPs). Our results suggest that the synergistic interplay of template-driven confinement and hierarchical chirality induce symmetry breaking of in situ-generated gold MNPs. We anticipate that the platform presented will facilitate fabrication of new hybrid, chiral organic–inorganic nanostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Development of a High-Rate Lithium-Air Battery Using a Gaseous CO 2 Reactant

Li-air batteries are considered a potential alternative to Li-ion batteries for transportation applications due to their high theoretical specific energy. Most works in this area focus on use of O 2 as the reactant. However, newer concepts for using gaseous reactants (such as CO 2 , which has a theoretical specific energy density of 1,876 Wh/kg) provide opportunities for further exploration. The main objective of this project was the development of a novel strategy that enables operation of Li-CO 2 batteries at high-capacity and high-rate, with a long-cycle-life. The team was able to: (1) Synthesize two novel transition metal chalcogenide (TMC) catalysts that work in synergy with ionic liquid-based electrolytes to enhance the efficiency of reactions during discharge and charge processes; (2) Fabricate high-porosity cathode electrodes with 3D printing to increase electrode surface area and gas permeability; (3) Develop a multiscale modeling framework that integrates Density Functional Theory (DFT), Ab-Initio Molecular Dynamics (AIMD), classical Molecular Dynamics (MD), and Finite Element Analysis (FEA) to investigate atomic and cell-level properties of Li-CO 2 batteries; (4) Assemble a stackable Li-CO 2 pouch-cell able to deliver a capacity of >200 mAh. These achievements were realized through an integrated approach based on materials synthesis, testing, characterization, analysis, and computation. This project produced a thorough understanding of key chemical, electronic, and kinetic parameters that govern the operation of Li- CO 2 batteries in realistic conditions. The methodologies employed, and the insight generated, will be valuable beyond advancing the field of Li-CO 2 batteries

25 ENERGY STORAGE↗
DOE OSTI2022

Fe–N–C Boosts the Stability of Supported Platinum Nanoparticles for Fuel Cells

The poor durability of Pt-based nanoparticles dispersed on carbon black is the challenge for the application of long-life polymer electrolyte fuel cells. Recent work suggests that Fe- and N-codoped carbon (Fe-N-C) might be a better support than conventional high-surface-area carbon. In this work, we find that the electrochemical surface area retention of Pt/Fe-N-C is much better than that of commercial Pt/C during potential cycling in both acidic and basic media. In situ inductively coupled plasma mass spectrometry studies indicate that the Pt dissolution rate of Pt/Fe-N-C is 3 times smaller than that of Pt/C during cycling. Density functional theory calculations further illustrate that the Fe-N-C substrate can provide strong and stable support to the Pt nanoparticles and alleviate the oxide formation by adjusting the electronic structure. The strong metal-substrate interaction, together with a lower metal dissolution rate and highly stable support, may be the reason for the significantly enhanced stability of Pt/Fe-N-C. In conclusion, this finding highlights the importance of carbon support selection to achieve a more durable Pt-based electrocatalyst for fuel cells.

25 ENERGY STORAGE↗
DOE OSTI2024

Cryptate binding energies towards high throughput chelator design: metadynamics ensembles with cluster–continuum solvation

A tiered forcefield/semiempirical/meta-GGA pipeline together with a thermodynamic scheme designed with error cancellation in mind was developed to calculate binding energies of [2.2.2] cryptate complexes of mono- and divalent cations. Stable complexes of Na, K, Rb, Ca, Zn and Pb were generated, revealing consistent cation–N lengths but highly variable cation–O lengths and an amine stacking mechanism potentially augmenting the cation size selectivity. Metadynamics, used for searching the high-dimensional potential energy surface, together with a cluster–continuum model for affordable – yet accurate – solvation modeling, enabled the discovery of more stable geometries than those previously reported. Similar solvation energy curve shapes for lone vs. coordinated ions enabled rapid solvation convergence via the cancellation of errors stemming from finite cluster sizes. In conclusion, an R 2 of 0.850 vs. experimental aqueous binding energies was obtained, validating this scheme as the backbone of a high-throughput workflow for chelator design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Depth-Dependent Emission from Silver Dopants in Single CdSe Nanoplatelets

Dopants in semiconductor nanostructures offer tremendous control over electronic, optical, and magnetic properties beyond what is achievable in bulk materials. We demonstrate that the broad dopant emission in semiconductor nanoplatelets effectively maps the electron wave function across the nanoplatelet thickness. Both the emission energy and lifetime of the dopant transition depend strongly on the depth of the dopant within the nanoplatelet. This dependence arises from the electrostatic self-interaction of the charged dopant, which varies with proximity to the dielectric discontinuity at the nanoplatelet surface. Through comprehensive single-particle spectroscopy of silver-doped CdSe nanoplatelets, we verify that acceptors near the center emit at higher energies with shorter lifetimes, while those near the surface emit at lower energies with longer lifetimes. This spatial mapping also reveals unusual two-color emission from individual nanoplatelets, with enhanced Auger recombination yielding exceptional photon antibunching (>90% purity) at room temperature, suggesting potential applications in quantum information technologies.

cadmium selenide↗
DOE OSTI2024

$K^0_S$ meson production in inelastic p+p interactions at 31, 40 and 80 $\text {Ge}\hspace{-1.00006pt}\text {V}\!/\!c$ beam momentum measured by NA61$/$SHINE at the CERN SPS

The yields of $K^0_S$ mesons have been measured in inelastic p+p interactions at incident projectile momenta of 31, 40 and 80 $\text {Ge}\hspace{-1.00006pt}\text {V}\!/\!c$ ($\sqrt{s_{NN}}=7.7, 8.8$ and 12.3 $\text {Ge}\hspace{-1.00006pt}\text {V}$, respectively). The data were recorded by the NA61$/$SHINE spectrometer at the CERN Super Proton Synchrotron and the $K^0_S$ mesons identified via their decays into $\pi ^{+} \pi ^{-}$ pairs. Double-differential distributions are presented as function of transverse momentum and rapidity. The mean multiplicities of $K^0_S$ mesons were determined to be $(5.95 \pm 0.19 (stat) \pm 0.30 (sys)) \times 10^{-2}$ at 31 $\text {Ge}\hspace{-1.00006pt}\text {V}\!/\!c$, $(7.61 \pm 0.13 (stat) \pm 0.43 (sys)) \times 10^{-2}$ at 40 $\text {Ge}\hspace{-1.00006pt}\text {V}\!/\!c$ and $(11.58 \pm 0.12 (stat) \pm 0.55 (sys)) \times 10^{-2}$ at 80 $\text {Ge}\hspace{-1.00006pt}\text {V}\!/\!c$. The results on $K^{0}_{S}$ production are compared with the production of charged kaons in corresponding reactions and with model calculations (Epos1.99, SMASH 2.0 and PHSD) as well as with published data from other experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Theoretical and kinetic modeling study of hydrazine oxidation

The present work constitutes the first theoretical and kinetic modeling study of hydrazine oxidation, which may be important for burnout in ammonia-fueled combustion. The kinetics of the oxidation of N 2 H 4 , N 2 H 3 and tHNNH by molecular oxygen were investigated via a quantum chemistry/canonical transition state theory approach. Geometries and anharmonic frequencies were obtained with density functional theory, and energies from coupled cluster calculations (CCSD(T)) extrapolated to the infinite basis set limit, with corrections for core-valence electron correlation, scalar relativistic effects, and higher level correlation up to lambda coupled cluster, CCSDT(Q) Λ . The key reactions occurred on the N 2 H 4 O 2 potential energy surface, where the results indicated a fast reaction of N 2 H 3 with HO 2 via singlet adducts to yield tHNNH + H 2 O 2 and HNN(H)O + H 2 O, while reaction on the triplet surface proceeds via a bound complex followed by a tight, submerged barrier to yield N 2 H 4 + O 2 . The results were incorporated in a detailed reaction mechanism, which was used to interpret the shock tube results from Michel and Wagner (1965) on the effect of O 2 on hydrazine conversion at 1100–1400 K. The kinetic model captured qualitatively the observed behavior, but underestimated the reaction rate under oxidizing conditions. The hydrazine pyrolysis chemistry dominated conversion at reducing conditions and/or high temperature. At oxidizing conditions and intermediate temperatures (≲ 1400 K), reactions of N 2 -amines with HO 2 and O 2 were important for the oxidation rate.

Ab initio calculations↗
DOE OSTI2020

Solvation Rule for Solid‐Electrolyte Interphase Enabler in Lithium‐Metal Batteries

Abstract Despite the exceptionally high energy density of lithium metal anodes, the practical application of lithium‐metal batteries (LMBs) is still impeded by the instability of the interphase between the lithium metal and the electrolyte. To formulate a functional electrolyte system that can stabilize the lithium‐metal anode, the solvation behavior of the solvent molecules must be understood because the electrochemical properties of a solvent can be heavily influenced by its solvation status. We unambiguously demonstrated the solvation rule for the solid‐electrolyte interphase (SEI) enabler in an electrolyte system. In this study, fluoroethylene carbonate was used as the SEI enabler due to its ability to form a robust SEI on the lithium metal surface, allowing relatively stable LMB cycling. The results revealed that the solvation number of fluoroethylene carbonate must be ≥1 to ensure the formation of a stable SEI in which the sacrificial reduction of the SEI enabler subsequently leads to the stable cycling of LMBs.

Su, Chi‐Cheung↗
DOE OSTI2020

Mechanistic Models as Framework for Understanding Biomarker Disposition: Prediction of Creatinine‐Drug Interactions

Creatinine is widely used as a biomarker of glomerular filtration, and, hence, renal function. However, transporter‐mediated secretion also contributes to its renal clearance, albeit to a lesser degree. Inhibition of these transporters causes transient serum creatinine elevation, which can be mistaken as impaired renal function. The current study developed mechanistic models of creatinine kinetics within physiologically based framework accounting for multiple transporters involved in creatinine renal elimination, assuming either unidirectional or bidirectional‐OCT2 transport (driven by electrochemical gradient). Robustness of creatinine models was assessed by predicting creatinine‐drug interactions with 10 perpetrators; performance evaluation accounted for 5% intra‐individual variability in serum creatinine. Models showed comparable predictive performances of the maximum steady‐state effect regardless of OCT2 directionality assumptions. However, only the bidirectional‐OCT2 model successfully predicted the minimal effect of ranitidine. The dynamic nature of models provides clear advantage to static approaches and most advanced framework for evaluating interplay between multiple processes in creatinine renal disposition.

Scotcher, Daniel↗
DOE OSTI2020

Solvation Rule for Solid-Electrolyte Interphase Enabler in Lithium-Metal Batteries

Despite the exceptionally high energy density of lithium metal anodes, the practical application of lithium-metal batteries (LMBs) is still impeded by the instability of the interphase between the lithium metal and the electrolyte. To formulate a functional electrolyte system that can stabilize the lithium-metal anode, the solvation behavior of the solvent molecules must be understood because the electrochemical properties of a solvent can be heavily influenced by its solvation status. Here, we unambiguously demonstrated the solvation rule for the solid-electrolyte interphase (SEI) enabler in an electrolyte system. In this study, fluoroethylene carbonate was used as the SEI enabler due to its ability to form a robust SEI on the lithium metal surface, allowing relatively stable LMB cycling. The results revealed that the solvation number of fluoroethylene carbonate must be ≥ 1 to ensure the formation of a stable SEI in which the sacrificial reduction of the SEI enabler subsequently leads to the stable cycling of LMBs.

25 ENERGY STORAGE↗
DOE OSTI2020

Genetic circuit characterization by inferring RNA polymerase movement and ribosome usage

To perform their computational function, genetic circuits change states through a symphony of genetic parts that turn regulator expression on and off. Debugging is frustrated by an inability to characterize parts in the context of the circuit and identify the origins of failures. Here, we take snapshots of a large genetic circuit in different states: RNA-seq is used to visualize circuit function as a changing pattern of RNA polymerase (RNAP) flux along the DNA. Together with ribosome profiling, all 54 genetic parts (promoters, ribozymes, RBSs, terminators) are parameterized and used to inform a mathematical model that can predict circuit performance, dynamics, and robustness. The circuit behaves as designed; however, it is riddled with genetic errors, including cryptic sense/antisense promoters and translation, attenuation, incorrect start codons, and a failed gate. While not impacting the expected Boolean logic, they reduce the prediction accuracy and could lead to failures when the parts are used in other designs. Finally, the cellular power (RNAP and ribosome usage) required to maintain a circuit state is calculated. This work demonstrates the use of a small number of measurements to fully parameterize a regulatory circuit and quantify its impact on host.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Optical Control of Dopamine D2-like Receptors with Cell-Specific Fast-Relaxing Photoswitches

Dopamine D2-like receptors (D2R, D3R, and D4R) control diverse physiological and behavioral functions and are important targets for the treatment of a variety of neuropsychiatric disorders. Their complex distribution and activation kinetics in the brain make it difficult to target specific receptor populations with sufficient precision. We describe a new toolkit of light-activatable, fast-relaxing, covalently taggable chemical photoswitches that fully activate, partially activate, or block D2-like receptors. This technology combines the spatiotemporal precision of a photoswitchable ligand (P) with cell type and spatial specificity of a genetically encoded membrane anchoring protein (M) to which the P tethers. These tools set the stage for targeting endogenous D2-like receptor signaling with molecular, cellular, and spatiotemporal precision using only one wavelength of light.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Non-bonding interaction of dual atom catalysts for enhanced oxygen reduction reaction

Here, we demonstrate the design of graphene-supported dual atom catalysts (DACs) for the four-electron oxygen reduction reaction (ORR), by utilizing the non-bonding interaction of counterpart metals (M) that synergistically tune the electronic properties and catalytic activity of the Fe active site in FeMN 6 -DAC and FeMN 8 -DAC systems, where M stands for Fe, Co, Ni, Cu, and Zn. More specifically, for Fe-M distances below 15Å, the non-bonding interaction is significant, making the system act as the DAC. We predicted that FeNiN 6 -DAC and FeNiN 8 -DAC exhibit a low ORR overpotential (η ORR ) of 0.28 V and 0.47 V, respectively, which are at the summits of volcano plots. This low η ORR originates from the high Bader charge transfer coupled with high spin density at the Fe site in both the FeNiN 6 -DAC and FeNiN 8 -DAC systems, which weakens the adsorption of OH* intermediate while enhancing its desorption to H 2 O. Guided by these density functional theory (DFT) computational results, we synthesized FeCoN 8 -DAC and FeNiN 8 -DAC along with N-doped graphene and confirmed their structures with scanning transmission electron microscopy (STEM), X-ray photoelectron spectroscopy (XPS), X-ray absorption near-edge structure (XANES), extended X-ray absorption fine structure (EXAFS), and electron spin resonance (ESR). We verify experimentally the catalytic activities and find that FeNiN 8 -DAC has the low experimental overpotential of 0.39 V with a Tafel slope of 47 mVdec -1 . Based on these results, we propose a DFT-guided strategy to tune the charge transfer and spin population of the active site toward designing DACs for electrochemical ORR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

ReaxFF Parameter Set for Boron Clusters and Icosahedral Boron Crystals: Comparison with Density Functional Theory and Machine-Learning Potentials

Icosahedral boron materials, which include regular icosahedra of 12 boron atoms have gained increasing attention due to their potential applications as superhard materials, semiconductors, and energy storage media. However, the synthesis of high quality crystals of these materials has been a major barrier to the development of these applications. To enable computational prediction of synthesis conditions yielding high-quality icosahedral boron crystals, herein we tested and refined a set of ReaxFF parameters for the nucleation and growth of such crystals. We focused on matching the relative energies of small boron clusters obtained by density functional theory since such small clusters and similar motifs are likely present in crystal nuclei and at the interface of growing crystals. Using a training set of B 80 clusters, including a low-energy core–shell structure containing a B 12 icosahedron core and a high-energy single-shell structure produced in preliminary ReaxFF simulations, the ReaxFF parameter set was refined to better reproduce energies calculated by density functional theory (DFT). Among existing ReaxFF parameter sets and the machine-learning interatomic potentials MACE-MP-0, MACE-MP-0b3, MACE-MPA-0, PFP v7.0.0, and SevenNet-MF-ompa, only our new parameter set and PFP v7.0.0 correctly ranked these B 80 clusters. This refinement led to improved agreement with DFT for a test set of 58 clusters consisting of 8–103 boron atoms. Furthermore, our refined parameter set yielded greater local icosahedral structure than the previously existing ReaxFF parameter set for larger scale simulations of crystallization from supercooled liquid boron. Additionally, simulations of solid boron in contact with molten nickel using our refined ReaxFF parameters yielded a boron solubility value that agrees moderately well with experimental expectations, while the previous boron parameters gave a value that was much too low.

boron↗
DOE OSTI2025

Electron Transfer Theory Elucidates the Hidden Role Played by Triethylamine and Triethanolamine during Photocatalysis

Triethylamine (TEA) and triethanolamine (TEOA) are renowned, in part, for their ability to reductively quench excited states by outer-sphere electron transfer with vast and still growing applications as sacrificial electron donors for photocatalytic systems. Upon amine oxidation, the resulting TEA •+ and TEOA •+ radical cations undergo proton transfer (or hydrogen atom transfer), resulting in the formation of a chemical reductant that has an α-carbon centered radical adjacent to the nitrogen center (TEA • and TEOA • ). In this contribution, we have electrochemically and spectroscopically characterized a set of electron acceptors which, upon accepting an electron, are a series of photocatalysts, [ReCl(R 1 R 2 -bpy)(CO) 3 ] •– , where R 1 and R 2 are electron-donating and electron-withdrawing groups in the 4,4′- and 5,5′-positions on the bipyridyl ligand. Here, we substantiated the formation of the electron donors, TE(O)A • , by spin trapping electron paramagnetic resonance spectroscopy, where TE(O)A • reacts with 2,4,6-tri-tert-butylnitrosobenzene to generate N-centered and O-centered radical adducts. Having established the chemical behaviors of the electron acceptors and donors individually, the electron transfer rate constants were determined across a 1.43 V range in driving force. The redox potential of TEA • was benchmarked to within ±80 mV on an absolute scale in V vs Fc + /Fc in CH 3 CN by using an empirical rate vs free-energy correlation, electron transfer theory, and density functional theory calculations. The equilibrium potentials for TEA • and TEOA • were determined to be −1.98 V and −1.76 V, respectively. Based on the kinetic and thermochemical analysis presented for TEA • and TEOA • , these transient radicals can be broadly considered strong homogeneous chemical reductants within the wider context of photoredox potentials. Thus, this work clarifies a frequently unnoticed secondary function for these sacrificial electron donors during photocatalysis and rationalizes the possibility of a one-photon/two-electron conversion process that is dependent on the free-energy exchange between TE(O)A • and photocatalysts.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Efficient diffusion of superdense lithium via atomic channels for dendrite-free lithium–metal batteries

The non-uniform aggregation of fast-diffused Li on an anode surface would aggravate its tip-effect-induced nucleation/growth, leading to the notorious dendrite growth in Li metal batteries (LMBs). Tuning the Li diffusion on the anode surface has been regarded previously as a mainstream method to induce its uniform deposition, while the diffusion of Li in the anode bulk is usually ignored. In this study, conceptually different from the classic surface modification, we propose a molecular tunnelling strategy to construct atomic channels in graphite bulk, which enables the fast diffusion of superdense Li. Density functional theory calculations and ab initio molecular dynamics simulations prove that the bulk diffusion through atomic channels could become a new and dominating path. Its reversible and efficient diffusion has been further visualized by in situ transmission electron microscopy. As a result, when coupled with high-loading LiFePO 4 cathodes (20 mg cm –2 ), a high areal capacity and 100% capacity retention are achieved over 370 cycles. Through this work a new strategy is developed based on the bulk-diffusion of superdense Li for dendrite-free LMBs, which can be pervasive in other high-performance energy storage systems.

25 ENERGY STORAGE↗