Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VISIBILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Flux Synthesis, Optical and Photocatalytic Properties of n -type Sn 2 TiO 4 : Hydrogen and Oxygen Evolution under Visible Light

Here, the n -type Sn 2 TiO 4 phase was synthesized using flux methods and found to have one of the smallest visible-light bandgap sizes known that also maintains suitable conduction and valence band energies for driving photocatalytic water-splitting reactions. The Sn 2 TiO 4 phase was synthesized using either a SnCl 2 flux or a SnCl 2 /SnF 2 peritectic flux in a 2:1 flux-to-precursor ratio heated at 600 and 400 °C for 24 h, respectively. The two types of salt fluxes resulted in large rod-shaped particles at 600 °C and smaller tetragonal prism-shaped particles at 400 °C. Surface photovoltage spectroscopy measurements produced a negative photovoltage under illumination >1.50 eV, which confirmed electrons as the majority charge carriers and ~1.50 eV as the effective band gap. Mott–Schottky measurements at pH 9.0 showed the conduction (–0.54 V vs NHE) and valence band (+1.01 V vs NHE) positions meet the critical thermodynamic requirements for total water splitting. The Sn 2 TiO 4 particles were deposited and annealed as polycrystalline films on FTO slides, and exhibited photoanodic currents in aqueous solutions under visible-light irradiation. The Sn 2 TiO 4 particles were also suspended in aqueous methanol solutions and irradiated with visible and ultraviolet light. The larger rod-shaped Sn 2 TiO 4 particles had the higher rates of photocatalytic hydrogen production (~11.6 μmol H 2 h –1 ) in comparison to the smaller tetragonal prism-shaped Sn 2 TiO 4 particles (~3.4 μmol H 2 h –1 ). Conversely, for photocatalytic oxygen production, the rates for the smaller tetragonal prism-shaped particles in aqueous AgNO 3 solution were slightly higher (~16.3 μmol O 2 h –1 ) than for the larger rod-shaped particles (~11.9 μmol O 2 h –1 ). Apparent quantum yields of 0.995% and 0.0098% were measured for O 2 and H 2 production, respectively, under 435 nm light.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Decay-Associated Fourier Spectroscopy: Visible to Shortwave Infrared Time-Resolved Photoluminescence Spectra

Here, we describe and implement an interferometric approach to decay-associated photoluminescence spectroscopy, which we term decay-associated Fourier spectroscopy (DAFS). In DAFS, the emitted photon stream from a substrate passes through a variable path length Mach–Zehnder interferometer prior to detection and timing. The interferometer encodes spectral information in the intensity measured at each detector enabling simultaneous spectral and temporal resolution. We detail several advantages of DAFS, including wavelength-range insensitivity, drift-noise cancellation, and optical mode retention. DAFS allows us to direct the photon stream into an optical fiber, enabling the implementation of superconducting nanowire single photon detectors for energy-resolved spectroscopy in the shortwave infrared spectral window (λ = 1–2 μm). We demonstrate the broad applicability of DAFS, in both the visible and shortwave infrared, using two Förster resonance energy transfer pairs: a pair operating with conventional visible wavelengths and a pair showing concurrent acquisition in the visible and the shortwave infrared regime.

47 OTHER INSTRUMENTATION↗

Visible-Blind UV Photodetector Based on Single-Walled Carbon Nanotube Thin Film/ZnO Vertical Heterostructures

Ultraviolet (UV) photodetectors based on heterojunctions of conventional (Ge, Si, and GaAs) and wide bandgap semiconductors have been recently demonstrated, but achieving high UV sensitivity and visible-blind photodetection still remains a challenge. Here in this work, we utilized a semitransparent film of p-type semiconducting single-walled carbon nanotubes (SC-SWNTs) with an energy gap of 0.68 ± 0.07 eV in combination with a molecular beam epitaxy grown n-ZnO layer to build a vertical p-SC-SWNT/n-ZnO heterojunction-based UV photodetector. The resulting device shows a current rectification ratio of 10 3 , a current photoresponsivity up to 400 A/W in the UV spectral range from 370 to 230 nm, and a low dark current. The detector is practically visible-blind with the UV-to-visible photoresponsivity ratio of 10 5 due to extremely short photocarrier lifetimes in the one-dimensional SWNTs because of strong electron–phonon interactions leading to exciton formation. Finallyl, in this vertical configuration, UV radiation penetrates the top semitransparent SC-SWNT layer with low losses (10–20%) and excites photocarriers within the n-ZnO layer in close proximity to the p-SC-SWNT/n-ZnO interface, where electron–hole pairs are efficiently separated by a high built-in electric field associated with the heterojunction.

36 MATERIALS SCIENCE↗

Turning on Visible-Light Photocatalytic C-H Oxidation over Metal-Organic Frameworks by Introducing Metal-to-Cluster Charge Transfer

The tailorable structure and electronic structure of metal–organic frameworks (MOFs) greatly facilitate their modulated light harvesting, redox power, and consequently photocatalysis. In this work, a representative MOF, UiO-66, was furnished by installing Fe 3+ onto the Zr-oxo clusters, to give Fe-UiO-66, which features extended visible light harvesting, based on metal-to-cluster charge transfer (MCCT). The Fe-UiO-66 with unique electronic structure and strong oxidizing power exhibits visible light-driven water oxidation, which is impossible for pristine UiO-66. More strikingly, under visible irradiation, the generated holes over Fe-UiO-66 are able to exclusively convert H 2 O to hydroxide radicals, initiating and driving the activation of stubborn C-H bond, such as toluene oxidation. The electrons reduce O 2 to O 2 •- radicals that further promote the oxidation reaction. The related catalytic mechanism and the structure–activity relationship have been investigated in detail. As far as we know, this is not only an unprecedented report on activating “inert” MOFs for photocatalytic C-H activation but also the first work on extended light harvesting and enhanced photocatalysis for MOFs by introducing an MCCT process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron transport and visible light absorption in a plasmonic photocatalyst based on strontium niobate

Semiconductor compounds are widely used for photocatalytic hydrogen production applications, where photogenerated electron–hole pairs are exploited to induce catalysis. Recently, powders of a metallic oxide (Sr 1-x NbO 3 , 0.03$<$x$<$0.20) were reported to show competitive photocatalytic efficiencies under visible light, which was attributed to interband absorption. This discovery expanded the range of materials available for optimized performance as photocatalysts. Here we study epitaxial thin films of SrNbO 3+δ and find that their bandgaps are ~4.1 eV. Surprisingly, the carrier density of the conducting phase exceeds 10 22 cm -3 and the carrier mobility is only 2.47 cm 2 V -1 s -1 . Contrary to earlier reports, the visible light absorption at 1.8 eV (~688 nm) is due to the plasmon resonance, arising from the large carrier density. We propose that the hot electron and hole carriers excited via Landau damping (during the plasmon decay) are responsible for the photocatalytic property of this material under visible light irradiation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Tantalum pentoxide: a new material platform for high-performance dielectric metasurface optics in the ultraviolet and visible region

Dielectric metasurfaces, composed of planar arrays of subwavelength dielectric structures that collectively mimic the operation of conventional bulk optical elements, have revolutionized the field of optics by their potential in constructing high-efficiency and multi-functional optoelectronic systems on chip. The performance of a dielectric metasurface is largely determined by its constituent material, which is highly desired to have a high refractive index, low optical loss and wide bandgap, and at the same time, be fabrication friendly. Here, we present a new material platform based on tantalum pentoxide (Ta 2 O 5 ) for implementing high-performance dielectric metasurface optics over the ultraviolet and visible spectral region. This wide-bandgap dielectric, exhibiting a high refractive index exceeding 2.1 and negligible extinction coefficient across a broad spectrum, can be easily deposited over large areas with good quality using straightforward physical vapor deposition, and patterned into high-aspect-ratio subwavelength nanostructures through commonly-available fluorine-gas-based reactive ion etching. We implement a series of high-efficiency ultraviolet and visible metasurfaces with representative light-field modulation functionalities including polarization-independent high-numerical-aperture lensing, spin-selective hologram projection, and vivid structural color generation, and the devices exhibit operational efficiencies up to 80%. Our work overcomes limitations faced by scalability of commonly-employed metasurface dielectrics and their operation into the visible and ultraviolet spectral range, and provides a novel route towards realization of high-performance, robust and foundry-manufacturable metasurface optics.

36 MATERIALS SCIENCE↗

Electro-optic characterization of synthesized infrared-visible light fields

The measurement and control of light field oscillations enable the study of ultrafast phenomena on sub-cycle time scales. Electro-optic sampling (EOS) is a powerful field characterization approach, in terms of both sensitivity and dynamic range, but it has not reached beyond infrared frequencies. Here, we show the synthesis of a sub-cycle infrared-visible pulse and subsequent complete electric field characterization using EOS. The sampled bandwidth spans from 700 nm to 2700 nm (428 to 110 THz). Tailored electric-field waveforms are generated with a two-channel field synthesizer in the infrared-visible range, with a full-width at half-maximum duration as short as 3.8 fs at a central wavelength of 1.7 µm (176 THz). EOS detection of the complete bandwidth of these waveforms extends it into the visible spectral range. To demonstrate the power of our approach, we use the sub-cycle transients to inject carriers in a thin quartz sample for nonlinear photoconductive field sampling with sub-femtosecond resolution.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Gigahertz-frequency acousto-optic phase modulation of visible light in a CMOS-fabricated photonic circuit

Optical phase modulators operating at visible wavelengths are essential components for photonic technologies such as those for quantum control, communications, and laser ranging. However, they remain challenging to implement in scalable, integrated platforms capable of handling high optical powers. Here we present a visible-light, gigahertz-frequency acousto-optic phase modulator, fabricated on a 200-mm wafer in a volume CMOS foundry, that supports greater than 500 mW of optical power at 730 nm. The device combines a piezoelectric transducer and a photonic waveguide within a single, wavelength-scale structure that confines both a propagating optical mode and an electrically excitable breathing-mode mechanical resonance. By tuning the device’s geometry to optimize the optomechanical interaction, we achieve modulation depths up to 4.85 rad with 80 mW of applied microwave power at 2.31 GHz in a 2-mm-long device. This corresponds to resonant modulation figures of merit of V π = 1.32V and V π ⋅ L = 0.26V cm. To our knowledge, this is the lowest V π ever demonstrated in any acousto-optic phase modulator and represents a 15-fold reduction in V π and a 100-fold reduction in required microwave power relative to state-of-the-art modulators with high visible-wavelength power handling commonly employed in quantum control systems.

Freedman, Jacob M. [Univ. of Arizona, Tucson, AZ (↗

Tuning of the magnetotransport properties of a spin-polarized 2D electron system using visible light

We report on the effects of visible light on the low temperature electronic properties of the spin-polarized two dimensional electron system (2DES) formed at the interfaces between LaAlO 3 , EuTiO 3 and (001) SrTiO 3 . A strong, persistent modulation of both longitudinal and transverse conductivity was obtained using light emitting diodes (LEDs) with emissions at different wavelengths in the visible spectrum range. In particular, Hall effect data show that visible light induces a non-volatile electron filling of bands with mainly 3 dxz,yz character, and at the same time an enhancement of the anomalous Hall effect associated to the magnetic properties of the system. Accordingly, a suppression of the weak-anti localization corrections to the magneto-conductance is found, which correlates with an enhancement of the spin-polarization and of the ferromagnetic character of 2DES. The results establish the LED-induced photo-doping as a viable route for the control of the ground state properties of artificial spin-polarized oxide 2DES.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Graphene oxide modified TiO 2 nanotube arrays: enhanced visible light photoelectrochemical properties

Novel nanocomposite films based on graphene oxide (GO) and TiO 2 nanotube arrays were synthesized by assembling GO on the surface of self-organized TiO 2 nanotube arrays through a simple assembling method. The composite films were characterized with field emission scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and UV-vis diffuse reflectance spectroscopy. Photoelectrochemical properties of the composite nanotube arrays were investigated under visible light illumination. Remarkably enhanced visible light photoelectrochemical response was observed for the GO decorated TiO 2 nanotube composite electrode compared with pristine TiO 2 nanotube arrays. Sensitizing effect of GO on the photoelectrochemical response of TiO 2 nanotube arrays was demonstrated and about 15 times enhanced maximum photoconversion efficiency was obtained with the presence of GO. Enhanced photocatalytic activity of TiO 2 nanotube arrays towards degradation of methyl blue was also demonstrated after modification of GO. The results presented here demonstrate GO to be efficient for the improvement of utilization of visible light for TiO 2 nanotube arrays.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Visible Light Assisted Photocatalytic Hydrogen Generation by Ta 2 O 5 /Bi 2 O 3 , TaON/Bi 2 O 3 , and Ta 3 N 5 /Bi 2 O 3 Composites

Composites comprised of two semiconducting materials with suitable band gaps and band positions have been reported to be effective at enhancing photocatalytic activity in the visible light region of the electromagnetic spectrum. Here, we report the synthesis, complete structural and physical characterizations, and photocatalytic performance of a series of semiconducting oxide composites. UV light active tantalum oxide (Ta2O5) and visible light active tantalum oxynitride (TaON) and tantalum nitride (Ta 3 N 5 ) were synthesized, and their composites with Bi 2 O 3 were prepared in situ using benzyl alcohol as solvent. The composite prepared using equimolar amounts of Bi 2 O 3 and Ta 2 O 5 leads to the formation of the ternary oxide, bismuth tantalate (BiTaO 4 ) upon calcination at 1000 °C. The composites and single phase bismuth tantalate formed were characterized by powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), Brunauer–Emmett–Teller (BET) surface area measurement, scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV–Vis diffuse reflectance spectroscopy, and photoluminescence. The photocatalytic activities of the catalysts were evaluated for generation of hydrogen using aqueous methanol solution under visible light irradiation (λ ≥ 420 nm). The results show that as-prepared composite photocatalysts extend the light absorption range and restrict photogenerated charge-carrier recombination, resulting in enhanced photocatalytic activity compared to individual phases. The mechanism for the enhanced photocatalytic activity for the heterostructured composites is elucidated based on observed activity, band positions calculations, and photoluminescence data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Visible-light-driven Bi 2 O 3 /WO 3 composites with enhanced photocatalytic activity

Semiconductor heterojunctions (composites) have been shown to be effective photocatalytic materials to overcome the drawbacks of low photocatalytic efficiency that results from electron–hole recombination and narrow photo-response range. We prepared a novel visible-light-driven Bi 2 O 3 /WO 3 composite photocatalyst by hydrothermal synthesis. The composite was characterized by scanning transmission electron microscopy (STEM), scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), X-ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET) surface area, Raman spectroscopy, photoluminescence spectroscopy (PL) and electrochemical impedance spectroscopy (EIS) to better understand the structures, compositions, morphologies and optical properties. Bi 2 O 3 /WO 3 heterojunction was found to exhibit significantly higher photocatalytic activity towards the decomposition of Rhodamine B (RhB) and 4-nitroaniline (4-NA) under visible light irradiation compared to that of Bi 2 O 3 and WO 3 . A tentative mechanism for the enhanced photocatalytic activity of the heterostructured composite is discussed based on observed activity, band position calculations, photoluminescence, and electrochemical impedance data. Our study provides a new strategy for the design of composite materials with enhanced visible light photocatalytic performance.

36 MATERIALS SCIENCE↗

A high performance UV–visible dual-band photodetector based on an inorganic Cs 2 SnI 6 perovskite/ZnO heterojunction structure

Inorganic metal halide (IMH) perovskites have recently emerged as highly promising optoelectronic materials due to their excellent material properties, including tunable direct bandgap, long carrier diffusion length, high carrier mobility and outstanding environmental stabilities. However, the performance of photodetectors fabricated from IMH perovskites so far is limited as compared to their counterparts based on organic–inorganic hybrid perovskites. In this work, we demonstrate a high performance ultraviolet–visible (UV–Vis) dual-band photodetector based on a Cs 2 SnI 6 /ZnO heterojunction structure. Therefore, by adjusting the polarity of the applied bias voltage, the photodetector can switch between two operation modes: (1) UV–Vis dual-band detection mode and (2) visible-blind UV detection mode. High detectivity in both the UV (1.39 × 10 12 Jones) and visible (5.88 × 10 11 Jones) regions is achieved. In addition, this photodetector demonstrated a fast response speed with a rise and fall time on the order of milliseconds and a large linear dynamic range of 119 dB. The excellent performance of this photodetector originates from efficient charge separation at the heterojunction interfaces, which will be discussed in detail in terms of the energy band diagrams and carrier dynamics of the device. Our study demonstrates the great application potential of inorganic vacancy-ordered perovskites in high-performance heterojunction photodetectors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Portable UV-visible spectrometer for measuring absorbance and dichroism of Langmuir monolayers at air-water interfaces.

An UV-visible spectrometer for measuring absorbance and dichroism of Langmuir monolayers under in situ conditions is described. The spectrometer utilizes a stand-alone multipass sensor, which is placed in a Langmuir trough and coupled with light source and spectrometer head via fiber optics. Implementation of the multipass scheme in the absorbance sensor makes it possible to obtain reliable quantitative spectroscopic data of the Langmuir monolayers with absorbance as low as 1 mOD. Such high sensitivity makes the developed sensor very useful for UV-visible spectral studies of a wide variety of chromophores. The new technique was applied to several model systems: fatty acid monolayers containing amphiphilic dyes DiI or BODIPY and also a monolayer of a synthetic amphiphilic porphyrin-binding peptide BBC16. Implementation of UV-visible absorbance spectroscopy measurements in situ together with x-ray scattering technique was used to confirm the bound state of the chromophore, and determine the exact position of the latter in the peptide matrix. Fiber optics design of the spectrometer provides portability and compatibility with other experimental techniques making it possible to study samples with a geometry unsuitable for conventional spectroscopic measurements and located in experimental environments with spatial limitations, such as synchrotron x-ray scattering stations.

36 MATERIALS SCIENCE↗

Z{sub eff} profile diagnostics using visible bremsstrahlung continuum for nonaxisymmetric plasmas with finite {beta} in large helical device

An astigmatism-corrected Czerny-Turner-type visible spectrometer coupled with a charge-coupled device has been installed in large helical device (LHD) to measure visible bremsstrahlung continuum. A full vertical profile has been observed from the elliptical plasmas at horizontally elongated plasma cross section through a 44 fiber parallel array with vertical observation length of {approx}1 m. Line emissions can be easily eliminated by use of the visible spectrometer instead of an interference filter. A nonmonotonic bremsstrahlung emission profile, which is originated in the thick ergodic layer surrounding the main plasma, has been observed for normal discharges in all the magnetic configurations of LHD. After analyzing the detailed structure, the lower half of the vertical bremsstrahlung emission profile is found to be free of the strong edge bremsstrahlung emission in inwardly shifted magnetic configurations (R{sub ax{<=}}3.60 m). The nonmonotonic bremsstrahlung emission disappeared in extremely high-density discharges (n{sub e{>=}}10{sup 14} cm{sup -3}) because of the reduction of the plasma outside boundary. When the local emissivity is calculated using Abel inversion, the solution is very sensitive to the distortion of the magnetic surface structure. The influence of the magnetic surface distortion based on the finite {beta} effect is examined as error estimation in addition to unclear edge plasma boundary due to the presence of the ergodic layer. The result indicates that the determination of the normalized minor radius for each observation chord gives a larger influence on the Abel inversion rather than the determination of the chord length. When the observed chord-integrated bremsstrahlung intensity profile is flat, the resultant uncertainty seen in the bremsstrahlung emissivity profile becomes large, in particular, at the plasma center. The Z{sub eff} profile calculated with consideration of density and temperature profiles is verified in neutral-beam-heated discharges with H{sub 2} and C pellet injections, where the Z{sub eff} values should be close to 1 and 6, respectively. Analysis on the flat and hollow electron density profiles results in a fairly flat Z{sub eff} profile.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Visible-light-driven photocatalysts: (La/Bi + N)-codoped NaNbO{sub 3} by first principles

To improve the photocatalytic activity of NaNbO{sub 3} for water splitting, the bandgap and the band edges of NaNbO{sub 3} should be tailored to match the visible part of the solar spectrum and hydrogen and oxygen redox potentials. By analyzing the band structures of La/Bi-doped and (La/Bi + N)-codoped NaNbO{sub 3}, we found that the pseudointermediate band (PIB) was formed in the bandgap in all the doped systems because of the orbital splitting of the Nb 4d induced by the dramatically enlarged O-Nb-O angles. The PIB could make the wide bandgap semiconductors absorb visible-light photons as long as it was degenerate or partially degenerate. Considering that the appropriate band edges and absorption properties, we believe that (La/Bi + N)-codoped NaNbO{sub 3} materials are promising photocatalysts for hydrogen production through water splitting under visible-light irradiation without other modifications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Visible-light-induced instability in amorphous metal-oxide based TFTs for transparent electronics

We investigate the origin of visible-light-induced instability in amorphous metal-oxide based thin film transistors (oxide-TFTs) for transparent electronics by exploring the shift in threshold voltage (V{sub th}). A large hysteresis window in amorphous indium-gallium-zinc-oxide (a-IGZO) TFTs possessing large optical band-gap (≈3 eV) was observed in a visible-light illuminated condition whereas no hysteresis window was shown in a dark measuring condition. We also report the instability caused by photo irradiation and prolonged gate bias stress in oxide-TFTs. Larger V{sub th} shift was observed after photo-induced stress combined with a negative gate bias than the sum of that after only illumination stress and only negative gate bias stress. Such results can be explained by trapped charges at the interface of semiconductor/dielectric and/or in the gate dielectric which play a role in a screen effect on the electric field applied by gate voltage, for which we propose that the localized-states-assisted transitions by visible-light absorption can be responsible.

36 MATERIALS SCIENCE↗

Solution-processed PCDTBT capped low-voltage InGaZnO{sub x} thin film phototransistors for visible-light detection

The effects of visible-light detection based on solution processed poly[N-9′′-hepta-decanyl-2,7-carbazole-alt-5,5-(4′,7′-di-2-thienyl-2′,1′, 3′benzothiadiazole) (PCDTBT) capped InGaZnOx (IGZO) phototransistors with Al{sub 2}O{sub x} serving as gate dielectric are investigated in this paper. The high-k dielectric is used to lower the device operating voltage down to 2 V. Photons emitted from laser sources with the wavelengths (λ) of 532 nm and 635 nm are absorbed through the layer of PCDTBT to generate electron-hole-pairs (EHPs). After the separation of EHPs, electrons are injected into IGZO layer through the p-n junction formed between the IGZO (n-type semiconductor) and the PCDTBT (p-type semiconductor). The photo-generated carriers boost the drain current of the transistors as well as bring about the negative threshold voltage shift. Significant enhanced detection performance is achieved under the laser wavelength of 532 nm. The highest photoresponsivity reaches up to 20 A/W, while the photoresponse rise time comes to 10 ms and the fall time comes to approximate 76 ms, which is much faster than trap assisted IGZO visible light detection. The fabricated phototransistors favor the application of visible-light detectors and/or optical switches.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗