Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VIBRATION EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Investigation of difficult component effects on finite element model vibration prediction for the Bell AH-1G helicopter. Volume 1: Ground vibration test results

Under the NASA-sponsored Design Analysis Methods for VIBrationS (DAMVIBS) program, a series of ground vibration tests and NASTRAN finite element model (FEM) correlations were conducted on the Bell AH-1G helicopter gunship to investigate the effects of difficult components on the vibration response of the airframe. Previous correlations of the AH-1G showed good agreement between NASTRAN and tests through 15 to 20 Hz, but poor agreement in the higher frequency range of 20 to 30 Hz. Thus, this effort emphasized the higher frequency airframe vibration response correlations and identified areas that need further R and T work. To conduct the investigations, selected difficult components (main rotor pylon, secondary structure, nonstructural doors/panels, landing gear, engine, fuel, etc.) were systematically removed to quantify their effects on overall vibratory response of the airframe. The entire effort was planned and documented, and the results reviewed by NASA and industry experts in order to ensure scientific control of the testing, analysis, and correlation exercise. In particular, secondary structure and damping had significant effects on the frequency response of the airframe above 15 Hz. Also, the nonlinear effects of thrust stiffening and elastomer mounts were significant on the low frequency pylon modes below main rotor 1p (5.4 Hz). The results of the ground vibration testing are presented.

Dompka, R. V.↗

Vibrational testing of optical fiber connector joints

An experimental study was performed to determine the effects of vibration on the propagation of light through SMA- and ST-type fiber-optic connectors. A multimode, fiber-optic link was vibrated from 0 to 10,000 Hz at a constant peak acceleration along the connector transverse and longitudinal axes. All other environmental parameters were ambient. Transfer characteristics through the connection were examined as a function of vibrational frequency using both laser and light-emitting diode (LED) light to illuminate the system. Slight differences in operation between the SMA and ST connectors were observed with no appreciative attenuation as a result of vibration. Vibration did cause the constant-amplitude input light to be modulated in the connector; however, the amplitude of vibration-induced noise was less than 3 standard deviations from the mean.

Sovie, Amy L.↗

Vibrational testing of optical fiber connector joints

An experimental study was performed to determine the effects of vibration on the propagation of light through SMA- and ST-type fiber-optic connectors. A multimode, fiber-optic link was vibrated from 0 to 10,000 Hz at a constant peak acceleration along the connector transverse and longitudinal axes. All other environmental parameters were ambient. Transfer characteristics through the connection were examined as a function of vibrational frequency using both laser and light-emitting diode (LED) light to illuminate the system. Slight differences in operation between the SMA and ST connectors were observed with no appreciative attenuation as a result of vibration. Vibration did cause constant-amplitude input light to be modulated in the connector; however; the amplitude of vibration-induced noise was less than 3 standard deviations from the mean.

Sovie, Amy L.↗

Investigation of difficult component effects on finite element model vibration prediction for the Bell AG-1G helicopter. Volume 2: Correlation results

Under the NASA-sponsored DAMVIBS (Design Analysis Methods for VIBrationS) program, a series of ground vibration tests and NASTRAN finite element model (FEM) correlations were conducted on the Bell AH-1G helicopter gunship to investigate the effects of difficult components on the vibration response of the airframe. Previous correlations of the AG-1G showed good agreement between NASTRAN and tests through 15 to 20 Hz, but poor agreement in the higher frequency range of 20 to 30 Hz. Thus, this effort emphasized the higher frequency airframe vibration response correlations and identified areas that need further R and T work. To conduct the investigations, selected difficult components (main rotor pylon, secondary structure, nonstructural doors/panels, landing gear, engine, furl, etc.) were systematically removed to quantify their effects on overall vibratory response of the airframe. The entire effort was planned and documented, and the results reviewed by NASA and industry experts in order to ensure scientific control of the testing, analysis, and correlation exercise. In particular, secondary structure and damping had significant effects on the frequency response of the airframe above 15 Hz. Also, the nonlinear effects of thrust stiffening and elastomer mounts were significant on the low frequency pylon modes below main rotor 1p (5.4 Hz). The results of the NASTRAN FEM correlations are given.

Dompka, R. V.↗

Computer analysis of railcar vibrations

Computer models and techniques for calculating railcar vibrations are discussed along with criteria for vehicle ride optimization. The effect on vibration of car body structural dynamics, suspension system parameters, vehicle geometry, and wheel and rail excitation are presented. Ride quality vibration data collected on the state-of-the-art car and standard light rail vehicle is compared to computer predictions. The results show that computer analysis of the vehicle can be performed for relatively low cost in short periods of time. The analysis permits optimization of the design as it progresses and minimizes the possibility of excessive vibration on production vehicles.

Vlaminck, R. R.↗

The relationships between residual stress relaxation and texture development in AZ31 Mg alloys via the vibratory stress relief technique

A systematic study of residual stress relaxation and the texture evolution of cold-rolled AZ31 Mg alloys using the vibratory stress relief technique with a simple cantilever beam vibration system was performed using a high-resolution X-ray diffractometer and a portable X-ray residual stress analyzer. The effects of vibrational stress excitation on the surface residual stress distribution and on the texture of pole figures (0002) occurring during the vibratory stress relief were examined. Compared with the effects corresponding to the same alloy under non-vibration condition, it can be observed that the uniform surface residual stress distribution and relaxation of the compressive residual stress in the stress concentration zone were observed rather than all of the residual stresses being eliminated. Furthermore, with an increase in the vibrational aging time, the compressive residual stress, texture density, and (0002) preferred orientation increased first and then decreased. It should be underlined that the vibratory stress relief process for the vibrational aging time of more than 10 min is able to weaken the strong basal textures of AZ31 Mg alloys, which is valuable for enhancement of their formability and is responsible for an almost perfect 3D-Debye–Scherrer ring. - Highlights: • 3D-Debye ring about VSR technique is not discussed in the existing literature. • A newly developed VSR method is suitable for small or thin workpieces. • The cosα method accurately and effectively determines the residual stresses. • The VSR technique is valuable for enhancement of their formability. • The texture and preferred orientation change with the vibrational aging time.

36 MATERIALS SCIENCE↗

Dynamics of trusses having nonlinear joints

The transient analysis of trusses having nonlinear joints can be accomplished using the residual force technique. The technique was applied a two degree of freedom spring mass system, a four bay planar truss, and an actual ten bay deployable truss. Joints chosen for analysis were the nonlinear gap joints and the linear Voigt joints. Results from the nonlinear gap analyses generally indicate that coupling between the modes can display some interesting effects during free vibration. One particularly interesting effect was that the damping of the structure appeared to be higher than could be accounted for from modal damping alone. Energy transferral from the lower to the higher modes was found to exist as a result of the modal coupling. The apparently increased damping was due to the fact that the energy transferred to the higher modes is inherently dissipated more quickly. Another interesting phenomenon was that the lower modes could drive the higher modes even during free vibration and that these modes could display a rather large quasi-steady state behavior even when modal damping was present. Gaps were also found to increase the amplitude and period of the free vibration response as expected.

Chapman, J. M.↗

Structural dynamic and aeroelastic considerations for hypersonic vehicles

Structural dynamic and aeroelastic considerations applicable to hypersonic vehicles are discussed. Emphasis is given to aerospace plane configurations. The definition of aerothermoelasticity and the operational flight environment are reviewed, and structural dynamic and aeroelastic areas of concern are individually discussed, including vibration, landing and taxiing, propellant dynamics, acoustics, lifting surface flutter, panel flutter, control surface buzz, buffeting, gust response, and static aeroelasticity. Recent research results from all-moveable delta-wing aerolastic studies, engine inlet lip aeroelastic analysis, and studies of thermal effects on vibration frequencies, aerodynamic heating effects on flutter, and active control of aeroelastic response are reviewed.

Cazier, F. W., Jr.↗

A Study of the Effectiveness of Various Methods of Vibration Reduction on Simplified Scale Models of the Nimbus Spacecraft

The results of an experimental investigation of the effectiveness of various isolation and damping methods in reducing the dynamic response of simplified scaled models of the Nimbus spacecraft to vibratory inputs are presented. Experimental mode shapes and natural frequencies of the simulated solar panels were determined and found to compare well with calculated values. Appreciable reductions of structural responses to vibratory-input motions were measured for independent inputs along the roll, pitch, and yaw axes for the cases in which distributed damping and/or isolation was utilized. A comparison of the response of the model with the full-scale spacecraft for inputs along the pitch axis is presented. Also included are the effects of stiffness between the control and sensory sections on the response of the model to vibratory inputs.

NIMBUS SATELLITE↗

STANDING DETONATION WAVES

Standing detonation waves - hydrogen-oxygen ignition delay - vibrational relation effects - two-dimensional effects in gaseous detonations

IGNITION↗

Coping With Vibrations In A Multiple-Payload Platform

Paper discusses methods of coping with vibrations in large platform supporting multiple scientific instruments. Solution requires coordination of three engineering approaches: suppressing vibrations, isolating vibrations, and compensating for vibrations. Has considerable value as introductory text on aiming instruments and minimizing effects of vibrations in large structures.

Sirlin, Samuel W.↗

Study of Bubble Size, Void Fraction, and Mass Transport in a Bubble Column under High Amplitude Vibration

Vertical vibration is known to cause bubble breakup, clustering and retardation in gas-liquid systems. In a bubble column, vibration increases the mass transfer ratio by increasing the residence time and phase interfacial area through introducing kinetic buoyancy force (Bjerknes effect) and bubble breakup. Previous studies have explored the effect of vibration frequency (f), but minimal effort has focused on the effect of amplitude (A) on mass transfer intensification. Thus, the current work experimentally examines bubble size, void fraction, and mass transfer in a bubble column under relatively high amplitude vibration (1.5 mm < A <9.5 mm) over a frequency range of 7.5–22.5 Hz. Results of the present work were compared with past studies. The maximum stable bubble size under vibration was scaled using Hinze theory for breakage. Results of this work indicate that vibration frequency exhibits local maxima in both mass transfer and void fraction. Moreover, an optimum amplitude that is independent of vibration frequency was found for mass transfer enhancements. Finally, this work suggests physics-based models to predict void fraction and mass transfer in a vibrating bubble column.

Mohagheghian, Shahrouz↗

Vibration damping of the Cassini spacecraft structure

Cassini is a large robotic spacecraft currently under development at the Jet Propulsion Laboratory (JPL) whose interplanetary scientific mission is to explore Saturn, its ring, and its moons. Cassini is scheduled to launch on a Titan IV rocket with a Centaur upper stage booster, and will be protected during ascent through the atmosphere by a lightweight aluminum payload fairing (PLF). As a result of the extreme noise levels generated by the powerful Titan IV at liftoff, and the acoustic transparency of the PLF, Cassini is predicted to experience sever acoustic levels. Furthermore, the high acoustic levels, coupled with the size and configuration of the spacecraft, will induce unacceptable random vibration levels on the structure and critical spacecraft components. Studies showed that the use of Tuned Vibration Absorbers (TVAs) would be effective in reducing vibration. A series of reverberant acoustic tests were performed on a partial development test model (DTM) of Cassini to evaluate the effectiveness of TVAs in reducing the structural vibration. The test results showed that significant vibration attenuation was achieved.

vibration damping↗

Atomic substitution effects on the structural and vibrational properties of Ni{sub x}Pb{sub 1-x}TiO{sub 3}: X-ray diffraction and Raman scattering investigations

The effects of the atomic substitution of Pb by Ni in the PbTiO{sub 3} ferroelectric perovskite on the vibrational and structural properties was studied using x-ray diffraction and Raman scattering. It was observed that for Ni concentrations between 0.0 and 0.4, there is the formation of a solid solution with reduction of the Raman wavenumber of the E(TO1) soft mode and the tetragonallity factor, which influence directly the temperature of the tetragonal ferroelectric to cubic paraelectric phase transition, the Curie temperature. For concentrations greater than 0.4, it is observed the formation of a PbTiO{sub 3} and NiTiO{sub 3} composite, denounced by the recovering of the both, tetragonallity factor and the E(TO1) soft mode wavenumber. The values of the Curie temperatures were estimated by the Raman scattering measurements for temperatures ranging from 300 to 950 K.

36 MATERIALS SCIENCE↗

Impact of dynamic Jahn-Teller effect on magnetic excitations, lattice vibration, and thermal conductivity in U 𝑥 ⁢T⁢h 1−𝑥 ⁡O 2 system

Vibrational and magnetic properties of single-crystal uranium-thorium dioxide (U 𝑥 ⁢T⁢h 1−𝑥⁡ O 2 ) with a full range of 0 < 𝑥 < 1 are investigated. Thorium dioxide is a diamagnet whose thermal properties are governed by lattice vibration. The addition of paramagnetic uranium ions leads to the emergence of magnetic effects that alter the thermophysical properties noticeably even at room temperature. The interaction of phonons with magnetic moments of uranium 5⁢𝑓 electrons mediated by magnetoelastic coupling results in an anomalous low-temperature thermal conductivity profile. Analysis of the magnetic susceptibility measurements indicates a departure from the Curie-Weiss relationship characteristic of noninteracting paramagnetic ions, previously associated with the dynamic Jahn-Teller (DJT) effect characterized by coupling between spin and the oxygen sublattice. The T 2⁢g Raman peak position follows a nonlinear trend as a function of uranium concentration and hints that these Raman active optical modes play a role in either DJT or in mediating quadrupole-quadrupole interactions. A first-principle-based thermal transport model is implemented to explain the low-temperature transport measurements, where the anomalous reduction is attributed to phonon-spin resonant scattering. The interplay between spins and phonons is also captured using high-resolution inelastic x-ray scattering (IXS) measurements of phonon linewidths. Our results provide insights into the phonon interactions with the magnetic excitations governing DJT effect and impacting the low-temperature thermal transport processes in this material system. Furthermore, these findings have implications for understanding low-temperature thermal transport and magnetic properties in advanced materials for information processing and energy applications.

36 - MATERIALS SCIENCE↗

Characterization of superconducting magnetic bearings (dynamic stiffness and damping coefficient in axial direction)

High T(sub c) superconductor as a stator and permanent magnets for a rotor were assembled into a superconducting magnetic bearing. The dynamic stiffness and the damping coefficient of the superconducting magnetic bearing in axial direction were measured. The dynamic stiffness depended on an axial gap between superconductor and permanent magnet. The superconducting magnetic bearings are advantageous for a passive bearing, because they have a vibration damping effect that a permanent magnet bearing does not have. The tendency of its vibration damping coefficient indicated an increase as the resonant frequency increased.

Takahata, Ryoichi↗

Effect of transient heating on vibration frequencies of some simple wing structures

Thermal stresses, which may result from transient heating, can cause changes in the effective stiffness of wing structures. Some effects of this change in stiffness were investigated experimentally by radiantly heating three types of simple wing structures: a uniform plate, a solid double-wedge section, and a circular-arc multiweb-wing section. Changes in stiffness were determined by measuring the changes in natural frequency of vibration during transient heating. Some comparisons are made between theoretical calculations and the measured data.

LOADS AND STRESSES, STRUCTURAL↗

Controlling Vibronic Coupling in Chlorophyll Proteins: The Effects of Excitonic Delocalization and Vibrational Localization

Vibrational-electronic (vibronic) coupling plays a critical role in excitation energy transfer in molecular aggregates and pigment-protein complexes (PPCs). But the interplay between excitonic delocalization and vibronic interactions is complex, often leaving even qualitative questions as to what conceptual framework (e.g., Redfield versus Forster theory) should be used to interpret experimental results. To shed light on this issue, we report here on the interplay between excitonic delocalization and vibronic coupling in site-directed mutants of the water soluble chlorophyll protein (WSCP), as reflected in 77 K fluorescence spectra. Experimentally, we find that in PPCs where excitonic delocalization is disrupted (either by mutagenesis or heterodimer formation), the relative intensity of the vibrational sideband (VSB) in fluorescence spectra is suppressed by up to 37% compared to the native protein. Furthermore, numerical simulations reveal that this effect results from the localization of high-frequency vibrations in the coupled system; while excitonic delocalization suppresses the purely electronic transition due to H-aggregate-like dipole-dipole interference, high-frequency vibrations are unaffected, leading to a relative enhancement of the VSB. By comparing VSB intensities of PPCs both in the presence and absence of excitonic delocalization, we extract a set of “local” Huang-Rhys (HR) factors for Chl a in WSCP. More generally, our results suggest a significant role for geometric effects in controlling energy-transfer rates (which depend sensitively on absorption/fluorescence line shapes) in molecular aggregates and PPCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗