Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ThIn”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Local orientation of chains at crystal/amorphous interfaces buried in isotactic polypropylene thin films

A better understanding of the aggregation states of polymer chains in thin films is of pivotal importance for developing thin film polymer devices in addition to its inherent scientific interest. Here we report the preferential orientation of the crystalline lamellae for isotactic polypropylene (iPP) in spin-coated films by grazing incidence of wide-angle X-ray diffraction in conjunction with sum frequency generation vibrational spectroscopy, which provides information on the local conformation of chains at crystal/amorphous interfaces buried in a thin film. The crystalline orientation of iPP, which formed cross-hatched lamellae induced by lamellar branching, altered from a mixture of edge-on and face-on mother lamellae to preferential face-on mother lamellae with decreasing thickness. Here, the orientation of methyl groups at the crystal/amorphous interfaces in the interior region of the iPP films changed, accompanied by a change in the lamellar orientation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Spiers Memorial Lecture: Next generation chalcogenide-based absorbers for thin-film solar cells

Inorganic-based thin-film photovoltaics (TFPV) represents an important component of the growing low-carbon energy market and plays a vital role in the drive toward lower cost and increased penetration of solar energy. Yet, commercialized thin-film absorber technologies suffer from some non-ideal characteristics, such as toxic or non-abundant element use (e.g., CdTe and Cu(In,Ga)(S,Se) 2 , which bring into question their suitability for terawatt deployment. Numerous promising chalcogenide, halide, pnictide and oxide semiconductors are being pursued to bridge these concerns for TFPV and several promising paths have emerged, both as prospective replacements for the entrenched technologies, and to serve as partner (i.e., higher bandgap) absorbers for tandem junction devices—e.g., to be used with a lower bandgap Si bottom cell. The current perspective will primarily focus on emerging chalcogenide-based technologies and provide both an overview of absorber candidates that have been of recent interest and a deeper dive into an exemplary Cu 2 BaSnS 4 -related family. Altogether, considering the combined needs of high-performance, low-cost, and operational stability, as well as the experiences gained from existing commercialized thin-film absorber technologies, chalcogenide-based semiconductors represent a promising direction for future PV development and also serve to highlight common themes and needs among the broader TFPV materials family.

14 SOLAR ENERGY↗
DOE OSTI2022

Co-sputtering of lithium vanadium oxide thin films with variable lithium content to enable advanced solid-state batteries

Advanced solid-state batteries most likely will entail aggressive structures or architectures with constraints that typically limit processing temperatures. Considering this, we have identified the importance of providing lithiated electrode materials at a modest processing temperature. Here we describe a pathway to meet this by the development of a co-sputtering process using lithium oxide and vanadium oxide targets which enables the growth of lithiated vanadium oxide (LVO) thin films for application in solid-state batteries. Analysis of the structure and film composition of samples deposited with different co-sputtering rate ratios and post-annealing shows that multiple phases of Li x V 2 O 5 likely coexist (i.e. α-, ε-, δ-, and γ-V 2 O 5 ), and that this is unchanged after electrochemical cycling. The co-sputtering process can tune the lithium content up to a highly lithiated state of at least Li 2 V 2 O 5 . Electrochemical half-cells showed a significant amount of lithium available on the first charge (delithiation of LVO). LVO samples post-annealed at 300 °C showed typical redox peaks for Li x V 2 O 5 for both one and two lithium insertion reactions, which were highly reversible in most cases. A thin-film solid-state battery prototype using LVO as a cathode had 20% of the expected capacity, although the coulombic efficiency is near 100% at a fast rate (22C). As a result, this co-sputtering technique represents an opportunity for low temperature synthesis of pre-lithiated cathodes for thin film batteries, and introduces a broader methodology of depositing metal oxides with different alkali metal contents.

25 ENERGY STORAGE↗
DOE OSTI2023

Effects of film thickness on electrochemical properties of nanoscale polyethylenedioxythiophene (PEDOT) thin films grown by oxidative molecular layer deposition (oMLD)

Poly(3,4-ethylene dioxythiophene) (PEDOT) has a high theoretical charge storage capacity, making it of interest for electrochemical applications including energy storage and water desalination. Nanoscale thin films of PEDOT are particularly attractive for these applications to enable faster charging. Recent work has demonstrated that nanoscale thin films of PEDOT can be formed using sequential gas-phase exposures via oxidative molecular layer deposition, or oMLD, which provides advantages in conformality and uniformity on high aspect ratio substrates over other deposition techniques. But to date, the electrochemical properties of these oMLD PEDOT thin films have not been well-characterized. In this work, we examine the electrochemical properties of 5–100 nm thick PEDOT films formed using 20–175 oMLD deposition cycles. We find that film thickness of oMLD PEDOT films affects the orientation of ordered domains leading to a substantial change in charge storage capacity. Interestingly, we observe a minimum in charge storage capacity for an oMLD PEDOT film thickness of ~30 nm (60 oMLD cycles at 150 °C), coinciding with the highest degree of face-on oriented PEDOT domains as measured using grazing incidence wide angle X-ray scattering (GIWAXS). Thinner and thicker oMLD PEDOT films exhibit higher fractions of oblique (off-angle) orientations and corresponding increases in charge capacity of up to 120 mA h g -1 . Electrochemical measurements suggest that higher charge capacity in films with mixed domain orientation arise from the facile transport of ions from the liquid electrolyte into the PEDOT layer. Greater exposure of the electrolyte to PEDOT domain edges is posited to facilitate faster ion transport in these mixed domain films. In conclusion, these insights will inform future design of PEDOT coated high-aspect ratio structures for electrochemical energy storage and water treatment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Atomic layer deposition of nickel sulfide thin films and their thermal and electrochemical stability

Nickel sulfides (NiS x ) show promise for a range of energy and other applications, but their (in)stability under processing and operating conditions is scarcely studied. Herein, we have developed a new NiS x atomic layer deposition process using an easily synthesized NiCl 2 (TMPDA) precursor (TMPDA = N,N,N′,N′-tetramethyl-1,3-propanediamine) with H 2 S. Thin films deposited at 165–225 °C consist mostly of the β-NiS phase and display low resistivity (∼40–120 μΩ cm), high purity (<3 at% impurities), and a rough morphology. The thermal stability of the NiS x thin films is studied using high-temperature X-ray diffraction, revealing that structural and compositional changes occur in reducing, inert, and oxidizing atmospheres at approximately 300–400 °C. Under electrochemical water splitting conditions, the films are unstable in acid due to dissolution, especially at oxidizing potentials. In an alkaline electrolyte, we do not observe Ni dissolution, but β-NiS transforms to Ni 3 S 2 under HER conditions, possibly supplemented with Ni and/or Ni(OH) 2 species. Under alkaline OER, all sulfur is lost and NiOOH is formed. In addition to offering an attractive, scalable route to the synthesis of NiS x thin films, our work highlights the importance of thermal and electrochemical (in)stability of sulfides as a crucial step for understanding and engineering materials for energy and other applications.

Mattinen, Miika [Univ. of Helsinki (Finland); Stan↗
DOE OSTI2020

Emerging edge states on the surface of the epitaxial semimetal CuMnAs thin film

Epitaxial thin films of CuMnAs have recently attracted attention due to their potential to host relativistic antiferromagnetic spintronics and exotic topological physics. Here, we report on the structural and electronic properties of a tetragonal CuMnAs thin film studied using scanning tunneling microscopy (STM) and density functional theory (DFT). STM reveals a surface terminated by As atoms, with the expected semi-metallic behavior. An unexpected zigzag step edge surface reconstruction is observed with emerging electronic states below the Fermi energy. DFT calculations indicate that the step edge reconstruction can be attributed to an As deficiency that results in changes in the density of states of the remaining As atoms at the step edge. Furthermore, this understanding of the surface structure and step edges on the CuMnAs thin film will enable in-depth studies of its topological properties and magnetism.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Controlling antiferromagnetic domains in patterned La0.7Sr0.3FeO3 thin films

Transition metal oxide thin films and heterostructures are promising platforms to achieve full control of the antiferromagnetic (AFM) domain structure in patterned features as needed for AFM spintronic devices. In this work, soft x-ray photoemission electron microscopy was utilized to image AFM domains in micromagnets patterned into La0.7Sr0.3FeO3 (LSFO) thin films and La0.7Sr0.3MnO3 (LSMO)/LSFO superlattices. A delicate balance exists between magnetocrystalline anisotropy, shape anisotropy, and exchange interactions such that the AFM domain structure can be controlled using parameters such as LSFO and LSMO layer thickness, micromagnet shape, and temperature. In LSFO thin films, shape anisotropy gains importance only in micromagnets where at least one extended edge is aligned parallel to an AFM easy axis. In contrast, in the limit of ultrathin LSFO layers in the LSMO/LSFO superlattice, shape anisotropy effects dominate such that the AFM spin axes at micromagnet edges can be aligned along any in-plane crystallographic direction.

Lee, Michael S. (ORCID:0000000177852189)↗
DOE OSTI2020

Ultra-low magnetic damping in epitaxial Li 0.5 Fe 2.5 O 4 thin films

The realization of more energy efficient nanomagnetic information devices relies on the existence of magnetic insulators capable of supporting pure spin currents in the absence of a dissipative charge current. Currently, there is a limited number of thin-film magnetic insulators with low magnetic damping. Li 0.5 Fe 2.5 O 4 (LFO) is well known to possess the lowest damping among the bulk spinel structure oxides, but, thus far, LFO thin films have not lived up to these expectations. Here, we demonstrate low magnetic damping (even lower than typical bulk values) and bulk magnetization in 3 nm thick epitaxial LFO thin films. At room temperature, SQUID magnetometry shows a high saturation magnetization of 320 kA/m, and broadband ferromagnetic resonance measurements yield an effective Gilbert damping parameter of 1.3×10 -3 , which is among the lowest reported for ferro-/ferrimagnetic films of comparable thickness. Our results show the promise of LFO as a candidate material for spin current-based spintronics.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Pyroelectric thin films—Past, present, and future

Pyroelectrics are a material class that undergoes a change in polarization as the temperature of the system is varied. This effect can be utilized for applications ranging from thermal imaging and sensing to waste-heat energy conversion to thermally driven electron emission. Here, we review recent advances in the study and utilization of thin-film pyroelectrics. Leveraging advances in modeling, synthesis, and characterization has provided a pathway forward in one of the more poorly developed subfields of ferroelectricity. We introduce the complex physical phenomena of pyroelectricity, briefly explore the history of work in this space, and highlight not only new advances in the direct measurement of such effects but also how our ability to control thin-film materials is changing our understanding of this response. Finally, we discuss recent advances in thin-film pyroelectric devices and introduce a number of potentially new directions the field may follow in the coming years.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Solution-phase p-type doping of highly enriched semiconducting single-walled carbon nanotubes for thermoelectric thin films

Single-walled carbon nanotubes (SWCNTs) are attractive materials for next-generation energy-harvesting technologies, including thermoelectric generators, due to their tunable opto-electronic properties and high charge carrier mobilities. Controlling the Fermi level within these unique 1D nanomaterials is often afforded by charge transfer interactions between SWCNTs and electron or hole accepting species. Conventional methods to dope SWCNT networks typically involve the diffusion of molecular redox dopant species into solid-state thin films, but solution-phase doping could potentially provide routes and/or benefits for charge carrier transport, scalability, and stability. Here, we develop a methodology for solution-phase doping of polymer-wrapped, highly enriched semiconducting SWCNTs using a p-type charge transfer dopant, F4TCNQ. This allows doped SWCNT inks to be cast into thin films without the need for additional post-deposition doping treatments. We demonstrate that the introduction of the dopant at varying stages of the SWCNT dispersion process impacts the ultimate thermoelectric performance and observe that the dopant alters the polymer selectivity for semiconducting vs metallic SWCNTs. In contrast to dense semiconducting polymer films, where solution-phase doping typically leads to disrupted morphologies and poorer TE performance than solid-state doping, thin films of solution-doped s-SWCNTs perform similarly to their solid-state doped counterparts. Interestingly, our results also suggest that solution-phase F4TCNQ doping leads to fully ionized and dimerized F4TCNQ anions in solid-state films that are not observed in films doped with F4TCNQ after deposition. Our results provide a framework for the application of solution-phase doping to a broad array of high-performance SWCNT-based thermoelectric materials and devices that may require high-throughput deposition techniques.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Perspective on solid-phase epitaxy as a method for searching novel topological phases in pyrochlore iridate thin films

Pyrochlore iridates exhibit various novel topological phenomena due to their topology and electron correlation. Notably, pyrochlore iridate was the first proposed material system shown to host the time-reversal symmetry broken Weyl semimetal phase. After this profound theoretical proposal, extensive experimental attempts have been made to synthesize high-quality samples in both bulk and film forms. In particular, adjusting thin film geometry represents a practical way to tune the U/ t ( U: Coulomb interaction and t: for hopping parameter) and identify the various topological phases in the regime U ~ λ ( λ: spin–orbit interaction). However, the instability of pyrochlore iridates at high temperature and low oxygen pressure has long been a barrier to growing pyrochlore iridate thin films by conventional film growth methods. To overcome this, pyrochlore iridate films have often been grown by the solid-phase epitaxy method, which uses a metastable amorphous layer grown at low temperature. During a high temperature post-annealing process, the layer in contact with a single crystalline substrate will crystallize epitaxially in the solid state by rearranging atoms at the interface. Here, we present a perspective on the solid-phase epitaxy as a method to synthesize epitaxial pyrochlore iridate thin films and a way to search for novel correlated phenomena.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Role of kinetic energy on Nb 3 Sn thin films by low-temperature co-sputtering

Nb 3 Sn is a promising thin film material for superconducting radio frequency (SRF) applications. Although surface resistivity, critical temperature, and critical field are advantageous in comparison to pure Nb, currently the performance of Nb 3 Sn is lacking behind due to its complex defect structure and phase inhomogeneities. In this work, the influence of the kinetic energy of the deposited particles on the defect structure in Nb 3 Sn thin films synthesized at low temperatures is investigated. A combination of extended x-ray absorption fine structure analysis, x-ray absorption spectroscopy mapping, and transmission electron microscopy reveals an improved local order and elemental homogeneity of the Nb 3 Sn films induced by higher kinetic energies of the elemental species during deposition. Even more, these process conditions lead to suppressed local inhomogeneities at grain boundaries, which can be one of the causes of critically reduced superconducting properties of low temperature sputter-coated Nb 3 Sn thin films. Finally, we show that the magnetic field-induced reduction of critical currents across weak-links formed at grain boundaries can be eliminated by the suggested materials’ synthesis.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Effect of substrate and growth method on vanadium dioxide thin films by RF magnetron sputtering: Vanadium metal oxidation vs reactive sputtering

Vanadium dioxide (VO 2 ) undergoes a metal–insulator phase transition at ~70 °C and has attracted substantial interest for potential applications in electronics, including those in neuromorphic computing. The vanadium–oxygen system has a rather complicated phase diagram, and controlling the stoichiometry and the phase of thin films of vanadium oxides is a well-known challenge. Here, we explore the novel combination of two methods of VO 2 thin film deposition using off-axis RF magnetron sputtering on (100)- and (111)-oriented yttria-stabilized zirconia (YSZ) substrates: reactive sputtering of vanadium in an oxygen environment and sputtering of vanadium metal followed by oxidation to VO 2 . Interestingly, the reactive sputtering process on both substrate orientations yields the metastable semiconducting VO 2 (B) phase, which is structurally stabilized by the YSZ surface. The metal sputtering and oxidation process on YSZ produces mainly the equilibrium monoclinic (or M1) phase of VO 2 that exhibits a metal–insulator transition. Using this method, we obtained thin films of (010)-textured polycrystalline VO 2 (M1) that show a metal–insulator transition with an on/off ratio larger than 1000.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Perpendicular magnetic anisotropy in half-metallic thin-film Co 2 CrAl

Magnetocrystalline anisotropy (MCA) is one of the key parameters investigated in spin-based electronics (spintronics), e.g. for memory applications. Here, we employ first-principles calculations to study MCA in thin film full Heusler alloy Co 2 CrAl. This material was studied in the past, and has been reported to exhibit half-metallic electronic structure in bulk geometry. In our recent work, we showed that it retains a 100% spin-polarization in thin-film geometry, at CrAl atomic surface termination. Here, we show that the same termination results in a perpendicular magnetic anisotropy, while Co surface termination not only destroys the half-metallicity, but also results in in-plane magnetization orientation. In addition, for films thicker than around 20 nm the contribution from magnetic shape anisotropy may become decisive, resulting in in-plane magnetization orientation. To the best of our knowledge, this is one of the first reports of half-metallic thin-film surfaces with perpendicular magnetic anisotropy. Furthermore, this result may be of interest for potential nano-device applications, and may stimulate a further experimental study of this and similar materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The evolution of the Milky Way’s thin disc radial metallicity gradient with K2 asteroseismic ages

ABSTRACT The radial metallicity distribution of the Milky Way’s disc is an important observational constraint for models of the formation and evolution of our Galaxy. It informs our understanding of the chemical enrichment of the Galactic disc and the dynamical processes therein, particularly radial migration. We investigate how the metallicity changes with guiding radius in the thin disc using a sample of red giant stars with robust astrometric, spectroscopic, and asteroseismic parameters. Our sample contains 668 stars with guiding radii 4 < Rg < 11 kpc and asteroseismic ages covering the whole history of the thin disc with precision ${\approx} 25 {{\, \rm per\ cent}}$. We use MCMC analysis to measure the gradient and its intrinsic spread in bins of age and construct a hierarchical Bayesian model to investigate the evolution of these parameters independently of the bins. We find a smooth evolution of the gradient from ≈−0.07 dex kpc−1 in the youngest stars to ≈−0.04 dex kpc−1 in stars older than 10 Gyr, with no break at intermediate ages. Our results are consistent with those based on asteroseismic ages from CoRoT, with that found in Cepheid variables for stars younger than 1 Gyr, and with open clusters for stars younger than 6 Gyr. For older stars we find a significantly lower metallicity in our sample than in the clusters, suggesting a survival bias favouring more metal-rich clusters. We also find that the chemical evolution model of Chiappini '09 is too metal poor in the early stages of disc formation. Our results provide strong new constraints for the growth and enrichment of the thin disc and radial migration, which will facilitate new tests of model conditions and physics.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Compressive strain turns 𝑠 ± - into 𝑑-wave pairing in a one-unit-cell La 3 ⁢Ni 2 ⁢O 7 thin film via substrate-induced hole doping

Motivated by recent reports of ambient-pressure superconductivity in La 3 ⁢Ni 2⁢ O 7 films grown on LaSrAlO 4 , we investigate the superconducting instability in a one-unit-cell (1UC) thin film using ab initio and random-phase approximation techniques. Compared to the high-pressure bulk system, the ratio of interlayer 𝑑 3⁢𝑧 2 −𝑟 2 hopping to intralayer 𝑑 𝑥 2 −𝑦 2 hopping is suppressed in the 1UC thin film, and the crystal-field splitting of the 𝑒 𝑔 orbitals is increased. Here, our calculation indicates that spin-fluctuation-driven pairing correlations are weak for the stoichiometric case at ambient pressure, but increase significantly under hole doping. The leading pairing symmetry is also found to change by hole doping. Specifically, we obtain a leading 𝑑 𝑥 2 −𝑦 2 pairing state at moderate hole doping, followed by a 𝑑 𝑥⁢𝑦 state at higher doping. These states are driven by intraband spin-fluctuation scattering within the 𝛾 hole pocket centered around the 𝑀 point, and arise primarily from states in the Ni layer farther from the substrate. These results strongly suggest that the thin-film superconducting samples are hole-doped and that pairing in this system predominantly arises in the layer, as opposed to the interlayer pairing in the pressurized bulk system.

Zhang, Yang [Oak Ridge National Laboratory (ORNL),↗
DOE OSTI2021

Uniaxial Néel vector control in perovskite oxide thin films by anisotropic strain engineering

Antiferromagnetic (AF) thin films typically exhibit a multidomain state, and control of the AF Néel vector is challenging, as AF materials are robust to magnetic perturbations. In this paper, uniaxial Néel vector control is demonstrated by relying on anisotropic strain engineering of epitaxial thin films of the prototypical AF material LaFeO 3 (LFO). Orthorhombic (011)- and (101)-oriented DyScO 3 , GdScO 3 , and NdGaO 3 substrates are used to engineer different anisotropic in-plane strain states. The anisotropic in-plane strain stabilizes structurally monodomain monoclinic LFO thin films. The uniaxial Néel vector is found along the tensile strained b axis, contrary to bulk LFO having the Néel vector along the shorter a axis, and no magnetic domains are found. Hence, anisotropic strain engineering is a viable tool for designing unique functional responses, further enabling AF materials for mesoscopic device technology.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Challenges to magnetic doping of thin films of the Dirac semimetal Cd 3 As 2

Magnetic doping of topological quantum materials provides an attractive route for studying the effects of time-reversal symmetry breaking. Thus motivated, we explore the introduction of the transition metal Mn into thin films of the Dirac semimetal Cd 3 A s2 during growth by molecular beam epitaxy. Scanning transmission electron microscopy measurements show the formation of a Mn-rich phase at the top surface of Mn-doped Cd 3 A s2 thin films grown using both uniform doping and delta doping. This suggests that Mn acts as a surfactant during epitaxial growth of Cd 3 A s2 , resulting in phase separation. Magnetometry measurements of such samples indicate a ferromagnetic phase with out-of-plane magnetic anisotropy. Electrical magneto-transport measurements of these films as a function of temperature, magnetic field, and chemical potential reveal a lower carrier density and higher electron mobility compared with pristine Cd 3 A s2 films grown under similar conditions. This suggests that the surfactant effect might also serve to remove impurities from the bulk of the film. Further, we observe robust quantum transport (Shubnikov-de Haas oscillations and an incipient integer quantum Hall effect) in very thin (7 nm) Cd 3 A s2 films despite being in direct contact with a structurally disordered surface ferromagnetic overlayer.

36 MATERIALS SCIENCE↗