Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Texas”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

DOE Zero Energy Ready Home Case Study: Durable Energy Builders - Houston, Texas

This case study describes a DOE Zero Energy Ready Home in Houston, Texas, that scored HERS 39 without PV and HERS 29 with PV. This 5,947 ft2 custom home has 11.5-inch ICF walls. The attic is insulated along the roof line with 5 to 7 inches of open-cell spray foam. Most of the home's drinking water is supplied by a 11,500-gallon rainwater cistern. Hurricane strapping connects the roof to the walls. The triple-pane windows are impact resistant. The foundation is a raised slab.

builder↗

Building America Case Study: Ventilation System Effectiveness and Tested Indoor Air Quality Impacts, Tyler, Texas

?Ventilation system effectiveness testing was conducted at two unoccupied, single-family, detached lab homes at the University of Texas - Tyler. Five ventilation system tests were conducted with various whole-building ventilation systems. Multizone fan pressurization testing characterized building and zone enclosure leakage. PFT testing showed multizone air change rates and interzonal airflow filtration. Indoor air recirculation by a central air distribution system can help improve the exhaust ventilation system by way of air mixing and filtration. In contrast, the supply and balanced ventilation systems showed that there is a significant benefit to drawing outside air from a known outside location, and filtering and distributing that air. Compared to the Exhaust systems, the CFIS and ERV systems showed better ventilation air distribution and lower concentrations of particulates, formaldehyde and other VOCs. System improvement percentages were estimated based on four System Factor Categories: Balance, Distribution, Outside Air Source, and Recirculation Filtration. Recommended System Factors could be applied to reduce ventilation fan airflow rates relative to ASHRAE Standard 62.2 to save energy and reduce moisture control risk in humid climates. HVAC energy savings were predicted to be 8-10%, or $50-$75/year. Cumulative particle counts for six particle sizes, and formaldehyde and other Top 20 VOC concentrations were measured in multiple zones. The testing showed that single-point exhaust ventilation was inferior as a whole-house ventilation strategy.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Building America Case Study: Occupant Comfort from a Mini-Split Heat Pump, San Antonio, Texas

IBACOS worked with builder Imagine Homes to evaluate the performance of an occupied new construction test house following construction of the house in the hot, humid climate of San Antonio, Texas. The project measures the effectiveness of a space conditioning strategy using a multihead mini-split heat pump (MSHP) system in a reduced-load home to achieve acceptable comfort levels (temperature and humidity) and energy performance. IBACOS collected long-term data and analyzed the energy consumption and comfort conditions of the occupied house after one year of operation. Although measured results indicate that the test system provides comfort both inside and outside the ASHRAE Standard 55-2010 range, the occupants of the house claimed both adequate comfort and appreciation of the ease of use and flexibility of the installed MSHP system. IBACOS also assisted the builder to evaluate design and specification changes necessary to comply with Zero Energy Ready Home, but the builder chose to not move forward with it because of concerns about the 'solar ready' requirements of the program.

30 DIRECT ENERGY CONVERSION↗

Residential Energy Efficiency Potential: Texas

Energy used by Texas single-family homes that can be saved through cost-effective improvements. Prepared by Eric Wilson and Noel Merket, NREL, and Erin Boyd, U.S. Department of Energy Office of Energy Policy and Systems Analysis.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Denton, Texas: Using Transportation Data to Reduce Fuel Consumption (City Energy: From Data to Decisions)

This fact sheet "Denton, Texas: Using Transportation Data to Reduce Fuel Consumption" explains how the City of Denton used data from the U.S. Department of Energy's Cities Leading through Energy Analysis and Planning (Cities-LEAP) and the State and Local Energy Data (SLED) programs to inform its city energy planning. It is one of ten fact sheets in the "City Energy: From Data to Decisions" series.

Cities leading through energy analysis and plannin↗

Using the LandCast Model With Firm Maps for Population Distribution Estimation on a Local Scale in Houston, Texas

Flooding is a significant concern with ninety percent of all natural disasters in the U.S. involving a flood (Flood Insurance Reform, 2017). This study is intended to provide a model for greater understanding of the future population distribution impact of flood risk consideration in planning and development. The ‘LandCast’ model will be used as a tool to apply a local analysis for the Houston/Harris County, Texas area to understand how consideration of floodplain maps in development can change future population distribution. Using the LandCast model, this study looks at how the geographic population distribution of Houston/Harris County might change in 2030 and 2050 if flood risk were a stronger policy consideration in future development. The intention is not to propose solutions to the flooding problem, but rather provide greater understanding to local planners and policy-makers of how the population would shift geographically if floodplain areas were excluded from future development.

Whitlock, Carrie A.↗

Use of a Black-Tailed Prairie Dog Burrow by Honey Bees in the Texas Panhandle

Cynomys ludovicianus Baird (Black-Tailed Prairie Dog) is considered to be a keystone species in the prairie, providing food and habitat for a diversity of wildlife. In October of 2020, we observed an active Apis mellifera Linnaeus (European Honey Bee) hive visible within the entrance of a burrow made by Black-Tailed Prairie Dogs in the treeless plains of the Texas Panhandle. Furthermore, this observation suggests that prairie dogs could provide habitat for this economically important pollinator and in landscapes otherwise devoid of cavities such as are commonly found in trees, buildings, and other structures.

54 ENVIRONMENTAL SCIENCES↗

Texas's Clean Energy Jobs Potential Through 2030

According to the U.S. Census Bureau, Texas had 19,095,227 people in its working population (15 to 64 years of age) in 2019. The graphs below show solar photovoltaic (PV), land-based wind, battery energy storage (BES), and energy efficiency job estimates in 2020, 2025, and 2030. These job estimates do not represent net job creation. Rather, they represent the size of the workforce required to achieve projected national deployment levels of each technology for 2025 and 2030 if the state captures the same proportion of jobs in the sector as it did in 2020.

clean energy↗

Characterization of Neutron and Gamma Dose in the Irradiation Cell of Texas A and M University Research Reactor

The Monte Carlo N-Particle (MCNP) code was used to develop a three dimensional computational model of the Texas A and M University Nuclear Science Center Reactor (NSCR) operating against the irradiation (dry cell) at steady state thermal power of 1 MW. The geometry of the NSCR core and the dry cell were modeled in detail. NSCR is used for a wide variety of experiments that utilizes the dry cell for neutron as well as gamma irradiation of samples. Information on the neutron and gamma radiation environment inside the dry cell is required to facilitate irradiation of samples. This paper presents the computed neutron flux, neutron and gamma dose rate, and foil reaction rates in the dry cell, obtained through MCNP5 simulations of the NSCR core. The neutron flux was measured using foil activation method and the reaction rates obtained from {sup 197}Au(n,{gamma}){sup 198}Au and {sup 54}Fe(n,p){sup 54}Mn were compared with the model and they showed agreement within {approx} 20%. The gamma dose rate at selected locations inside the dry cell was measured using radiochromic films and the results indicate slightly higher dose rates than predicted from the model. This is because the model calculated only prompt gamma dose rates during reactor operation while the radiochromic films measured gammas from activation products and fission product decayed gammas. The model was also used to calculate the neutron energy spectra for the energy range from 0.001 eV- 20 MeV. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A Mobility Energy Productivity Evaluation of On-Demand Transit: A Case Study in Arlington, Texas

On-demand transit (ODT) systems are increasing in number and size. In order to evaluate and quantify outcomes, we use the Mobility Energy Productivity (MEP) metric, a holistic tool to analyze, quantify, and compare the mobility and accessibility of various transportation modes in a specific area. In this paper, we apply the MEP tool to the ODT system in Arlington, Texas, and compare the results among four existing transportation modes (drive, transportation network company, transit, and bike) and five additional ODT scenarios. We focus our analysis on the opportunities that an ODT system presents such as serving disadvantages communities. While the results in Arlington show the typical U.S. pattern of driving receiving the highest MEP score, the ODT system best serves those in disadvantaged communities, helping with an equity design goal. ODT improved the average MEP score across the service area by 100% when considering only non-private vehicle modes (bike, transit, and ODT). For the ODT scenarios, decreasing the wait time 50% compared to the baseline scenario led to a nearly 160% increase in MEP score, while increasing the ODT travel speed by 21% led to an 80% improvement in MEP score. The decreased wait time scenario had the highest MEP score out of the six ODT scenarios. This paper demonstrates how ODT can enhance mobility, particularly for disadvantaged communities. The results of a MEP analysis can be used by researchers and transit agencies to compare transportation modes and improve the effectiveness of transportation systems in subareas across a service area.

accessibility↗

Preliminary Assessment for the Electric Load Shifting Potential of Integrating Thermal Energy Storage with Heat Pumps in Residential Buildings in Texas of United States

The widespread adoption of electric-driven heat pumps for heating and cooling is expected to significantly increase electric demand. Cooling electric demand will result in an increase in peak hours electric loads, placing additional strain on the grid during peak hours. This challenge, combined with the current rapidly increasing demand from data centers, exacerbates the electric demand duck curve problem. Integrating thermal energy storage (TES) with heat pump can shift electric use for heating and cooling from peak to off-peak hours of the electric grid, which can help flatten the daily electric demand profile of a building. This paper presents a novel design that integrates heat pump with TES (HP-TES), which uses phase change materials (PCM). Heat pump charges TES by melting or freezing PCM during off-peak hours when there is no thermal demand from the building. TES is then discharged (i.e., by freezing or melting PCM) during peak hours to provide a more favorable heat source or heat sink for the heat pump to meet the thermal demand of the building with lower electricity use than conventional air-source heat pumps. Computer simulations were developed to predict the performance of HP-TES applied to a typical single-family house in the US. The building-level simulation results were scaled up to preliminarily assess the aggregated impacts of deploying HP-TES across all single-family houses in Texas of the United States, including reduction of peak demand of the electric grid.

Anees, Fady [ORNL]↗

Renewable Energy Opportunities at Fort Hood, Texas

The document provides an overview of renewable resource potential at Fort Hood based primarily upon analysis of secondary data sources supplemented with limited on-site evaluations. The effort was funded by the U.S. Army Installation Management Command (IMCOM) as follow-on to the 2005 DoD Renewables Assessment. This effort focuses on grid-connected generation of electricity from renewable energy sources and also ground source heat pumps for heating and cooling buildings, as directed by IMCOM.

15 GEOTHERMAL ENERGY↗

Houston, Texas: Solar in Action (Brochure)

This brochure provides an overview of the challenges and successes of Houston, TX, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

14 SOLAR ENERGY↗

San Antonio, Texas: Solar in Action (Brochure)

This brochure provides an overview of the challenges and successes of San Antonio, TX, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

14 SOLAR ENERGY↗