SEARCH · Engineering Papers

Results for “Temperature-Dependent”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

All sources NASA NTRS DOE OSTI

NASA NTRS1982

Laboratory studies of charged particle erosion of SO2 ice and applications to the frosts of Io

The removal and/or redistribution of SO2 frosts on the surface of the first Galilean satellite, Io, can occur through the erosion of these frosts by the magnetosphere particle environment of the satellite. The energy, species, and temperature dependence of the erosion rates of SO2 ice films by charged particles have been studied in laboratory experiments. Rutherford backscattering and thin film techniques are used in the experiments. The ice temperature is varied between about 10 K and the sublimation temperature. The erosion rates are found to have a temperature-independent and a temperature-dependent regime and to be much greater, for 10-2000 keV ions, than those predicted by the usual sputtering process. The laboratory results are used together with measured magnetosphere particle fluxes in the vicinity of Io to estimate the erosion rates of SO2 ice films from the satellite and implications therefrom on an SO2 atmosphere on Io.

Lanzerotti, L. J.↗

NASA NTRS1982

Self-adaptive closed constrained solution algorithms for nonlinear conduction

Self-adaptive solution algorithms are developed for nonlinear heat conduction problems encountered in analyzing materials for use in high temperature or cryogenic conditions. The nonlinear effects are noted to occur due to convection and radiation effects, as well as temperature-dependent properties of the materials. Incremental successive substitution (ISS) and Newton-Raphson (NR) procedures are treated as extrapolation schemes which have solution projections bounded by a hyperline with an externally applied thermal load vector arising from internal heat generation and boundary conditions. Closed constraints are formulated which improve the efficiency and stability of the procedures by employing closed ellipsoidal surfaces to control the size of successive iterations. Governing equations are defined for nonlinear finite element models, and comparisons are made of results using the the new method and the ISS and NR schemes for epoxy, PVC, and CuGe.

Padovan, J.↗

NASA NTRS1982

Large-area silicon sheet task

A set of computer models was used to define a growth system configuration that was then built and used to grow web with lower thermally generated stress. Aspects of research in the edge-defined film-fed growth (EFG) method of making Si ribbon are reported. A technique was developed to determine base resistivity and carrier lifetime in semicrystalline wafers. Automated growth of 150 kg of 15 cm-dia ingot material per crucible is reviewed. Scanning transmisson electron microscopy (STEM) and microprobe investigations of processed EFG ribbon are reported. The chemical composition of the large precipitates was studied. The structural arrangement and the electrical activity of distentions or close to the central twin plane in processed material were studied. The electrical and structural properties of grain boundaries in silicon are discussed. Temperature-dependence measurements of zero-bias conductance, a photoconductivity technique, and deep-level transient spectroscopy (DLTS) were developed. A grooving and staining technique, secondary ion mass spectroscopy, and EBIC measurements in scanning electron microscopy were used to study enhanced diffusion of phosphorus at grain boundaries in polycrystaline silicon. The fundamental mechanisms of abrasion and wear and the deformation of Si by a diamond in various fluid environments are described. The efficiency of solar cells made from EFG ribbon and Semix Inc. material is reported.

Morrison, A. D.↗

NASA NTRS1982

Lithospheric flexure at fracture zones

Studies attempting to demonstrate that lithospheric flexure occurs across the Pioneer and Mendocino fracture zones, and that the flexural topography is a topographic expression at these fracture zones, are presented. The flexure is modelled and compared with predicted depths with five bathymetric profiles which cross the two fracture zones at different ages. The model uses a thin elastic plate overlying an incompressible fluid half-space, and incorporates a temperature-dependent effective elastic thickness. Several conclusions were derived from this study. First, it is found that no significant slip on the fossil fault planes of the Mendocino and Pioneer fracture zones exists. In addition, the flexural amplitude is determined to increase with age. Finally, it is concluded that there is elastic coupling between the Mendocino and Pioneer fracture zones since the separation is less than a flexural wavelength.

Sandwell, D.↗

NASA NTRS1981

The influence of environmental effects on the mechanical properties of graphite/epoxy laminates

The time dependent deformational and creep rupture processes in graphite/epoxy laminates are examined as a function of temperature and stress level. The role of accelerated characterization of design materials is discussed, and the use of a nonlinear time-temperature-stress-superposition principle in the determination of compliance master curves as a function of stress and temperature is considered. Creep rupture analytical models are discussed as applied to polymer-matrix composites, and the data is shown to be in general agreement with a logarithmic stress and temperature-dependent delayed fracture model. Comparisons between creep and rupture experiments and phenomenological models are presented.

Brinson, H. F.↗

NASA NTRS1983

An uncoupled viscoplastic constitutive model for metals at elevated temperature

An uncoupled constitutive model for predicting the transient response of thermal and rate dependent, inelastic material behavior is presented. The uncoupled model assumes that there is a temperature below which the total strain consists essentially of elastic and rate insensitive inelastic strains only. Above this temperature, the rate dependent inelastic strain (creep) dominates. The rate insensitive inelastic strain component is modeled in an incremental form with a yield function, flow rule and hardening law. Revisions to the hardening rule permit the model to predict temperature-dependent kinematic-isotropic hardening behavior, cyclic saturation, asymmetric stress-strain response upon stress reversal, and variable Bauschinger effect. The rate dependent inelastic strain component is modeled using a rate equation in terms of back stress, drag stress and exponent n as functions of temperature and strain. A sequence of hysteresis loops and relaxation tests are utilized to define the rate dependent inelastic strain rate. Evaluation of the model is performed by comparison with experiments involving various thermal and mechanical load histories on 5086 aluminum alloy, 304 stainless steel and Hastelloy-X.

Haisler, W. E.↗

NASA NTRS1983

Energetics and the resistive tearing mode - Effects of Joule heating and radiation

The contribution of energy flux to the dynamics of magnetic field reconnection is analytically studied in order to determine the influence of Joule heating and radiation on the linear development of the tearing instability in slab geometry. A temperature-dependent Coulomb-like resistivity is used to provide the coupling between the dynamics and the energy equation. Analytical expressions are derived for the growth rates utilizing constant-psi and long-wavelength approximations. The solutions indicate the occurrence of several modes in addition to the usual tearing mode, several of which have relatively slow, complex growth rates. At large values of the magnetic Reynolds number, there are at least two modes with purely exponential growth when the radiative loss decreases with increasing temperature. If the radiation is neglected, the Joule heating alone also results in two modes with real, positive growth at large S. Below a particular value of S, all the modes are generally stabilized.

Steinolfson, R. S.↗

NASA NTRS1983

The minimum mantle viscosity of an accreting earth

The minimum mantle viscosity in an earth accreting from planetesimals is estimated. A plausible distribution of planetesimal sizes deposits enough energy to melt the outer nine-tenths of earth's mass; however, vigorous convection keeps temperatures near the solidus. Viscosity is significantly lower than prevails now. The temperature-dependent viscosity provides self-regulation so there is a continuing balance between accretional energy input and heat transfer out. This allows calculation of the minimum viscosity necessary to transfer out heat by a Nu/Ra-number relation. Typical viscosities are 0.1 to a million sq m/sec, lowest at mid-accretion when the mass growth rate is largest. Terrestrial planets are compared, and minimum iron descent times to central lithospheres are calculated.

Cooperman, S. A.↗

NASA NTRS1983

The effects of Ohmic heating and stable radiation on magnetic tearing

A study is made of the effect of a temperature-dependent Coulomb-like resistivity on the planar tearing mode. The local evolution of the temperature is described by an energy equation which includes Joule heating and optically thin radiation. The resulting system of coupled linear magnetohydrodynamic equations is solved numerically, and eigenfunctions and growth rates are obtained. In the absence of radiation, there are two distinct solutions above a critical value of the magnetic Reynolds number S, a tearing-like mode and a Joule-heating mode. Below this point, the growth rates coalesce into a conjugate-complex pair. When stable radiation (dR/dT greater than 0) is added, the heating mode disappears and a modified tearing excitation exists to much lower values of S before its growth is cut off by Ohmic heating. Examples are given for solar coronal parameters, and for those characteristic of fusion-research devices. The introduction of an effective value for the resistivity, in the presence of energy transport, allows a simple qualitative discussion of the different modes.

Tachi, T.↗

NASA NTRS1984

Radiative tearing - Magnetic reconnection on a fast thermal-instability time scale

Two energy modification mechanisms which are known to occur in sheared magnetic fields are the tearing and thermal instabilities. These processes can be studied separately with formalisms incorporating just the effective driving mechanism of interest (finite resistivity for the tearing mode and unstable radiation for the thermal mode). A model which includes both effects, and a temperature-dependent resistivity, indicates that modified forms of these two instabilities may coexist for identical physical conditions. When they are isolated computationally, one can show that their limiting growth rates are approximately those of the uncoupled instabilities. The spatial structure and energy content of these two new hybrid processes are then individually examined and are found to differ considerably from those obtained from separate treatments of the driving mechanisms. The faster radiative instability, which has a hydromagnetically scaled growth rate like the condensation mode of the thermal instability, is shown to involve a substantial amount of magnetic field reconnection. This can be partially explained by a large temperature drop (or resistivity rise) at the X-point. The island width of the Coulomb-coupled radiative mode is 30 percent of that produced by a comparable level of the slower tearing instability. In addition, the perturbed magnetic energy in the radiative instability is 5 times that of the perturbed thermal energy, indicating an appreciable modification of the initial magnetic structure.

Steinolfson, R. S.↗

NASA NTRS1984

Infrared photometry of the dust in comets

Infrared observations of six comets ranging in heliocentric distance from 1 to 5 AU are reported. Data consist of wide and intermediate bandpass filter photometry, 1-20 microns, for periodic comets Stephan-Oterma, Swift-Gehrels, Kearns-Kwee, Gunn, and Grigg-Skjellerup and for parabolic Comet Elias (1981 XV). All of the comets show infrared temperatures hotter than a theoretical black body, indicating small absorbing grains. No emission feature at 10 microns was observed within the accuracy of the filter photometry. The photometric system is discussed in detail, and temperature-dependent corrections to monochromatic magnitudes are presented.

Tokunaga, A. T.↗

NASA NTRS1984

Semiannual oscillation of stratospheric ozone

By applying spherical harmonic analysis to the ozone data obtained from the Nimbus-7 solar backscattered UV-radiation measurements for the period from November 1978 to October 1980, the following features of the semi-annual oscillation (SAO) in stratospheric ozone are revealed: (1) the equatorial ozone SAO has a broad maximum of the order of 0.5 (mixing ratio in micro-g/g) between the 10 mb and 3 mb levels, and the maximum shifts downward from 1 mb in June (and December) to 40 mb in November (and May); (2) amplitudes of polar ozone SAO's are larger than that of the equatorial SAO, with a major maximum at 2 mb which is 2 micro-g/g at 75 deg N and 0.8 micro-g/g at 75 deg S, respectively; (3) the inverse phase between the polar and tropical SAO which occurs around the 3 mb (about 40 km) level can be interpreted in terms of the temperature-dependent ozone chemistry and the poleward meridional transport of ozone by dynamical processes in the atmosphere.

Maeda, K.↗

NASA NTRS1984

The effects of the variations in sea surface temperature and atmospheric stability in the estimation of average wind speed by SEASAT-SASS

The average wind speeds from the scatterometer (SASS) on the ocean observing satellite SEASAT are found to be generally higher than the average wind speeds from ship reports. In this study, two factors, sea surface temperature and atmospheric stability, are identified which affect microwave scatter and, therefore, wave development. The problem of relating satellite observations to a fictitious quantity, such as the neutral wind, that has to be derived from in situ observations with models is examined. The study also demonstrates the dependence of SASS winds on sea surface temperature at low wind speeds, possibly due to temperature-dependent factors, such as water viscosity, which affect wave development.

Liu, W. T.↗

NASA NTRS1983

Development of constitutive models for cyclic plasticity and creep behavior of super alloys at high temperature

An uncoupled constitutive model for predicting the transient response of thermal and rate dependent, inelastic material behavior was developed. The uncoupled model assumes that there is a temperature below which the total strain consists essentially of elastic and rate insensitive inelastic strains only. Above this temperature, the rate dependent inelastic strain (creep) dominates. The rate insensitive inelastic strain component is modelled in an incremental form with a yield function, blow rule and hardening law. Revisions to the hardening rule permit the model to predict temperature-dependent kinematic-isotropic hardening behavior, cyclic saturation, asymmetric stress-strain response upon stress reversal, and variable Bauschinger effect. The rate dependent inelastic strain component is modelled using a rate equation in terms of back stress, drag stress and exponent n as functions of temperature and strain. A sequence of hysteresis loops and relaxation tests are utilized to define the rate dependent inelastic strain rate. Evaluation of the model has been performed by comparison with experiments involving various thermal and mechanical load histories on 5086 aluminum alloy, 304 stainless steel and Hastelloy X.

Haisler, W. E.↗

NASA NTRS1949

Dislocation Theory of the Fatigue of Metals

A dislocation theory of fatigue failure for annealed solid solutions is presented. On the basis of this theory, an equation giving the dependence of the number of cycles for failure on the stress, the temperature, the material parameters, and the frequency is derived for uniformly stressed specimens. The equation is in quantitative agreement with the data. Inasmuch as one material parameter is indicated to be temperature-dependent and its temperature dependence is unknown, it is impossible to predict the temperature dependence of the number of cycles for failure. A predicted quantitative correlation between fatigue and creep was found to exist, which suggests the practical possibility of obtaining fatigue data for annealed solid solutions and elements from steady-state creep-rate data for these materials. As a result of this investigation, a modification of the equation for the steady-state creep rate previously developed on the basis of the dislocation theory is suggested. Additional data are required to verify completely the dislocation theory of fatigue.

Machlin, E S↗

NASA NTRS2026

Thermoplastic Matrix Composite Design for Cryotanks Using Multiscale Modeling and Bayesian Optimization

Designing lightweight, robust cryogenic storage tanks is critical for future launch vehicles, in-space propellant storage, and hydrogen powered aircraft. This work presents a multiscale modeling and Bayesian optimization framework for the design of thermoplastic matrix composite cryotanks. Molecular dynamics simulations are first used to determine temperature-dependent constituent properties for candidate thermoplastic matrices, which are homogenized to the lamina scale using NASA’s Multiscale Analysis Tool (NASMAT). These lamina properties, in combination with laminate family generation rules, are evaluated in HyperX structural optimization software to identify stacking sequences that meet all cryogenic load requirements. A Bayesian optimization framework is applied, with HyperX in the loop (via the HyperX API) to efficiently search across material and laminate design variables, yielding an optimized cryotank configuration with significant reductions in design cycle time compared to exhaustive search approaches.

thermoplastics↗

DOE OSTI2025

Developing a Nuclear Quality Assurance Compliant Design Methodology for Neutronic Analysis of Xe-100 Design

The primary objective of this work is to develop a design methodology compliant with nuclear quality assurance standards for the Xe-100 neutronic design verification studies. To achieve this, a Monte Carlo model of the Xe-100 reactor was constructed using the exclusion principle, transformation technique, and universe-based level specification following Idaho National Laboratory (INL) NQA level-1 compliant standards and an NQA-1 compliant version of MCNP6. The model encompasses the entire reactor core structures, including the upper plenum, core region, and lower plenum sections, along with all sub-components. The active core section was represented using the spectral regions, each comprising a particular fuel composition and temperature averaged over the considered zone, calculated by X-energy using Very Superior Old Programs (VSOP). Additionally, a component-wise temperature map was implemented into the model, not only for the core region but also for the structural components. Temperature-dependent cross-section libraries, along with thermal scattering law libraries, generated using INL NQA-1 compliant version of NJOY21, were utilized for each isotope in the burnt fuel and the structural materials. Furthermore, the volume of each modeled component was estimated using a stochastic approach with the ray tracing method in MCNP and criticality calculations were performed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2025

Optimization of the light detection system of the ICARUS detector

The Short Baseline Neutrino (SBN) Program at Fermilab is designed to investigate short-baseline neutrino oscillations and test the hypothesis of sterile neutrinos, motivated by several experimental anomalies observed over the past decades. Within this program, the ICARUS experiment plays a key role. It employs the world’s largest Liquid Argon Time Projection Chamber (LArTPC) and serves as the farthest and most sensitive SBN detector for studying muon and electron neutrino oscillations. A crucial subsystem of the ICARUS detector is the Light Detection System (LDS), which captures the prompt scintillation light produced by neutrino interactions in the 600-ton active liquid Argon volume. This system provides precise timing information that is essential for event reconstruction, the trigger system, and cosmic background rejection. The LDS is composed of 360 Hamamatsu R5912-MOD 8-inch photomultiplier tubes (PMTs), operating under cryogenic conditions ($\sim 87 \ K$) inside the detector’s cryostats. During the detector’s operation at FNAL, a degradation in PMT gain has been observed, attributed to aging under low-temperature conditions. In collaboration with ICARUS teams from INFN Pavia and Catania, I developed an experimental setup to study the temperature-dependent behavior of the PMTs, performing gain measurements both at room temperature and down to $-70°C$ using a climatic chamber at INFN Catania. The results indicate that while the PMTs maintain stable gain at room temperature, a significant and permanent gain reduction occurs at low temperatures. Although $-70°C$ is still warmer than liquid Argon temperatures, the findings clearly demonstrate a gain-dependent performance degradation. The thesis also discusses mitigation strategies implemented in the ICARUS detector to address this issue and presents a simplified model to describe and simulate the observed behavior.

Saia, Clara [Catania U.] (ORCID:0009000464102417)↗