Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TITRATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Molecular origins of the zeta potential

The zeta potential (ZP) is an oft-reported measure of the macroscopic charge state of solid surfaces and colloidal particles in contact with solvents. However, the origin of this readily measurable parameter has remained divorced from the molecular-level processes governing the underlying electrokinetic phenomena, which limits its usefulness. Here, we connect the macroscopic measure to the microscopic realm through nonequilibrium molecular dynamics simulations of electroosmotic flow between parallel slabs of the hydroxylated (110) rutile (TiO 2 ) surface. These simulations provided streaming mobilities, which were converted to ZP via the commonly used Helmholtz-Smoluchowski equation. A range of rutile surface charge densities (0.1 to –0.4 C/m 2 ), corresponding to pH values between about 2.8 and 9.4, in RbCl, NaCl, and SrCl 2 aqueous solutions, were modeled and compared to experimental ZPs for TiO 2 particle suspensions. Simulated ZPs qualitatively agree with experiment and show that “anomalous” ZP values and inequalities between the point of zero charge derived from electrokinetic versus pH titration measurements both arise from differing co- and counterion sorption affinities. We show that at the molecular level the ZP arises from the delicate interplay of spatially varying dynamics, structure, and electrostatics in a narrow interfacial region within about 15 Å of the surface, even in dilute salt solutions. This contrasts fundamentally with continuum descriptions of such interfaces, which predict the ZP response region to be inversely related to ionic strength. In reality the properties of this interfacial region are dominated by relatively immobile and structured water. Furthermore, viscosity values are substantially greater than in the bulk, and electrostatic potential profiles are oscillatory in nature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Subtle Effects of Aliphatic Alcohol Structure on Water Extraction and Solute Aggregation in Biphasic Water/ n -Dodecane

Organic phase aggregation behavior of 1-octanol and its structural isomer, 2-ethylhexanol, in a biphasic n-dodecane water system is studied with a combination of physical measurement, small-angle X-ray scattering (SAXS), and atomistic molecular dynamic simulations. Physical properties of the organic phases are probed following their mixing and equilibration with immiscible water phases. Studies reveal that the interfacial tension decreases as a function of increasing alcohol concentration over the solubility range of the alcohol with no evidence for a critical aggregate concentration (cac). An uptake of water into the organic phases is quantified, as a function of alcohol content, by Karl Fischer titrations. The extraction of water into dodecane was further assessed as a function of alcohol concentration via the slope-analysis method sometimes employed in chemical separations. This provides a qualitative understanding of solute (water/alcohol) aggregation in the organic phase. The physical results are supported by analyses of SAXS data that reveals an emergence of aggregates in n-dodecane at elevated alcohol concentrations. The observed aggregate structure is dependent on the alcohol tail group geometry, consistent with surfactant packing parameter. The formation of these aggregates is discussed at a molecular level, where alcohol-alcohol and alcohol-water H-bonding interactions likely dominate the occurrence and morphology of the aggregates.

Knight, Andrew W.↗
DOE OSTI2019

Ion-Specific Effects of Divalent Ions on the Structure of Polyelectrolyte Brushes

Polyelectrolyte brushes consist of charged polymer chains attached on one end to a surface at high densities. They are relevant for many practical applications ranging from biosensors to drug delivery to colloidal stability. Their structure and functionality can be dramatically influenced by multivalent counterions in the solution environment. In this work, the surface forces apparatus (SFA) and atomic force microscopy (AFM) were used to investigate the effects of three alkaline earth divalent cations, Mg 2+ , Ca 2+ , and Ba 2+ , on the structures of polystyrenesulfonate (PSS) brushes tethered to mica and silicon oxide surfaces. While all these ions caused significant shrinkage of the height of the PSS brushes, strong ion-specific effects were observed. Mg 2+ and C 2+ , caused homogeneous shrinkage; Ba 2+ led to pinned-micelle like inhomogeneous structures. Isothermal titration calorimetry (ITC) demonstrated that this ion specificity was mainly caused by the difference in binding energy between sulfonate groups and the divalent cations. Considering the abundance of divalent cations in industrial processes, natural environments, and biological systems, the understanding of strong ion-specific effects of divalent counterions is of great importance for theoretical studies and various applications involving polyelectrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Polymer Tacticity Effects in Polymer–Lanthanide Chelation Thermodynamics

Metal-chelating polymers are critical components in numerous applications. However, despite the known influence of polymer tacticity on both bulk and solution properties, most materials used in metal-chelation applications are atactic. Here, we investigate the relationship between polymer tacticity and polymer–lanthanide interactions in aqueous solution. We synthesized a series of five poly(methacrylic acid)s with systematic variations in tacticity (20–99% m diads) and used isothermal titration calorimetry to measure the thermodynamics of lanthanide binding to each material (ΔH, ΔG, ΔS, K a , and stoichiometry). We observed enthalpy–entropy compensation across this tacticity series, finding that both |ΔH| and |ΔS| decreased with decreasing m diad content while ΔG remained similar. Molecular dynamics simulations of the polymer–metal interactions revealed that the observed differences in binding thermodynamics may be largely ascribed to differences in polymer flexibility. Furthermore, these combined experimental and computational results demonstrate that metal binding can be influenced by altering the polymer stereochemistry, ultimately influencing the design of more efficient metal-chelating materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Role of Cations in the Cation-Driven Assembly Process and their Effect on the Charge Storage Properties of Bilayered Vanadium Oxide and Reduced Graphene Oxide Heterostructures in Alkali Ion Systems

Exfoliated δ-Li x V 2 O 5 ·nH 2 O (ex-LVO) and reduced graphene oxide (rGO) heterostructures were constructed using different assembling cations (i.e., Li⁺, Na⁺, and K⁺ ions). The ex-LVO and rGO nanoflakes were stacked together using a concentrated chloride solution of each assembling cation and vacuum annealed at 200 °C to form three distinct two-dimensional (2D) layered architectures. X-ray diffraction and thermogravimetric analysis confirmed that the assembling ions can control the interlayer spacing of the bilayered vanadium oxide (BVO) phase as well as impact the crystallographic water content, which in turn affects the electrochemical performance. Scanning electron microscopy, scanning transmission electron microscopy (STEM), electron energy-loss spectroscopy (EELS), and X-ray photoelectron spectroscopy confirmed that a 2D heterointerface formed between LVO and rGO and that the cations used to assemble the heterostructure are trapped in the interlayer BVO region. High-resolution STEM imaging also showed the rGO dispersion throughout the LVO layers. Moreover, STEM-EELS identified a V 2 O 3 phase that forms along the rGO interface and can stabilize the materials during cycling. A charge storage mechanism analysis, combined with the galvanostatic intermittent titration technique, found that increased interlayer spacings of the BVO phase and using the assembling cations to define intercalation sites for identical charge-carrying ions lead to improved ion diffusion and increased capacities during cycling. Therefore, the Li⁺ and Na⁺ ion assembled heterostructures showed improved charge-carrying ion diffusion and charge storage capacities in each of their respective charge storage systems (i.e., Li-ion and Na-ion half-cells). In total, the cation used for heterostructure assembly can modify the final material structure and tailor the ion diffusion and charge storage capacity to tune its properties for the desired electrochemical system using a variety of 2D materials.

25 ENERGY STORAGE↗
DOE OSTI2020

Synthesis of LiNiO 2 at Moderate Oxygen Pressure and Long-Term Cyclability in Lithium-Ion Full Cells

The widespread adoption of electric vehicles necessitates higher-energy-density and longer-life cathode materials for Li-ion batteries. LiNiO 2 offers a higher energy density at a lower cost than other high-Ni-content cathodes containing additional transition-metal ions. However, detrimental phase transformations and impedance growth, resulting from structural defects formed during synthesis, lead to poor cyclability and limit the practical viability of LiNiO 2 . Herein, we demonstrate a considerably improved cycle life for LiNiO 2 by synthesizing it under a pressurized oxygen environment. The capacity retention in pouch-type full cells with a graphite anode after 1000 cycles is increased from 59 to 76% by applying a mere 1.7 atm of oxygen pressure during the synthesis of LiNiO 2 . With iodometric titration and inductively coupled plasma optical emission spectroscopy analysis, we provide clear evidence that oxygen pressure during synthesis reduces the occurrence of lattice oxygen vacancies and increases the content of Ni 3+ in LiNiO 2 , improving its structural integrity and cyclability. Post-mortem analysis of the cycled cathodes provides insights into the sources of degradation occurring during long-term cycling. Here, this work demonstrates a practically viable, synthetic approach combined with doping and coating to achieve improved performance with high-Ni layered oxide materials. Furthermore, this work represents the first report of extended cycling of LiNiO 2 in pouch full cells with graphite anode and will, therefore, serves as an important benchmark for future research on LiNiO 2 .

25 ENERGY STORAGE↗
DOE OSTI2024

Insights into the Electrochemical Oxidation and Reduction of Nickel Oxide Surfaces

Surface oxidation/reduction processes, driven by varying electrochemical potentials, can substantially impact catalyst effectiveness and, consequently, electrolyzer performance. Here, this study combines theoretical and experimental approaches to explore the surface redox behavior of nickel oxides, which are cost-effective and efficient catalysts for many electrochemical reactions. Surface Pourbaix diagrams for three different phases of nickel oxides, i.e., nickel hydroxide (Ni(OH) 2 ), nickel oxyhydroxide (NiOOH), and nickel dioxide (NiO 2 ), were constructed using density functional theory-based simulations. Various experimental methods, including cyclic voltammetry, in situ Raman spectroscopy, and electrochemical titration, were employed to probe the surface redox processes of nickel oxide thin films. Our findings indicate that the ABAB stacking sequence of Ni(OH) 2 lacks stability under oxidizing conditions to host the surface oxidation (deprotonation) events, while the AABBCC stacking sequence of NiOOH is energetically favorable due to the presence of interlayer hydrogen bonding. Rapid charge transfer facilitated by interlayer hydrogen bonding accounts for the higher reactivity of partially oxidized/reduced NiOOH (001) surfaces compared to Ni(OH) 2 (001) and NiO 2 (001) surfaces with the same stoichiometry, where interlayer hydrogen bonding is absent. Insights presented in this work can offer guidelines for optimizing operational conditions and tailoring the surface structures and oxidation states of nickel oxides to enhance performance in applications such as electrocatalysis and supercapacitors.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Electrolyte-Dependent, “Microscopically Irreversible” H-Atom Transfer Kinetics of Ce-Based Metal–Organic Framework, Ce-MOF-808

Redox reactions at the interface of metal oxides and protic electrolytes almost always involve protons and electrons in equal amounts. Given the stoichiometry, these proton-coupled electron transfer (PCET) reactions are thermochemically equivalent to net H-atom transfer (HAT) reactions. The correlation between the chemical nature of solid catalysts and HAT kinetics has been employed for decades as the design principle for energy-relevant reactions (e.g., reactions of 2H + /H 2 ). More recently, chemists have experimentally determined that a change in liquid electrolytes that alters the microenvironment at the redox-active sites has an equally profound impact on electrocatalysis involving PCET/HAT. Yet, precise correlations between the chemical nature of electrolytes and the PCET kinetics are, to date, rare in the literature. Herein, we report our findings using the Ce-based metal−organic framework, Ce-MOF-808, as a model system. Each Ce 6 (μ 3 −O) 4 (μ 3 − OH) 4 (OH) 6 (H 2 O) 6 node of this MOF undergoes a 1H + /1e − redox reaction. Using chronoamperometry and the Cottrell analysis, we have determined that the PCET hopping kinetics within the pores of Ce-MOF-808 can change by orders of magnitude by altering the buffer species and the proton activity of the electrolyte. Furthermore, in all buffers, reductive reactions were ∼3−10 times faster in kinetics than the reverse oxidative reaction with the same electrochemical driving force, suggesting that the system, at first glance, violates the principle of microscopic reversibility. Isothermal titration calorimetry (ITC) and computational simulations corroborated that the buffer-node binding thermodynamics are quite distinct, depending on the chemical nature of the buffer and the oxidation state of the node. Together, these results suggest that the substrate and the product during the oxidative vs reductive reaction of Ce-MOF-808 are chemically different species, which explains the apparent ‘microscopic irreversibility.’ Thus, the rational modulation of electrolytes can dramatically enhance PCET kinetics, even though the solid electrodes remain identical. Implications of these findings are contrasted with the electrochemical/electrocatalytic behavior of other redox-active MOFs, heterogeneous catalysts, and enzymatic systems at the solid−liquid interface.

Ce-based MOF↗
DOE OSTI2020

Molecular Recognition at Mineral Interfaces: Implications for the Beneficiation of Rare Earth Ores

Ce-bastnäsite is the single largest mineral source for light rare-earth elements. In view of the growing industrial importance of rare-earth minerals, it is critical to develop more efficient methods for separating the valuable rare-earth-containing minerals from the surrounding gangue. In this work, we employ a combination of periodic density functional theory (DFT) and molecular mechanics (MM) calculations together with the de novo molecular design program HostDesigner to identify bis-phosphinate ligands that preferentially bind to the (100) Ce-bastnäsite surface rather than the (104) calcite surface. DFT calculations for a simple phosphinate ligand were employed to qualitatively understand key behaviors involved in ligand–metal, ligand–solvent, and solvent–metal interactions. These insights were then used to guide the search for flexible, rigid, and semirigid hydrocarbon linkers to identify candidate bis-phosphinate ligands with the potential to bind preferentially to Ce-bastnäsite. Among the five most promising bis-phosphinate ligands suggested by theoretical studies, three ligands were synthesized and their adsorption characteristics to bastnäsite (100) interfaces were characterized using vibrational sum-frequency (vSFG) spectroscopy, attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, and isothermal titration calorimetry (ITC). The efficacy of the selective interfacial molecular binding was demonstrated by identifying a bis-phosphinate ligand capable of providing an overall higher surface coverage of alkyl groups relative to a monophosphinate ligand. The results highlight the interplay between adsorption binding strength and maximum surface coverage in determining ligand efficiency to render the mineral surface hydrophobic. DFT calculations further indicate that all tested ligands have higher affinity for Ce-bastnäsite than for calcite. Finally, this is consistent with the ITC data showing stronger adsorption enthalpy to bastnäsite than to calcite, making these ligands promising candidates for selective flotation of Ce-bastnäsite.

58 GEOSCIENCES↗
DOE OSTI2021

Nucleobase-Functionalized Poly(alkylthiophene)s: One-Pot, Sequential Direct Arylation Polymerization and Deprotection, and Surface Modification for Oil–Water Separations

Direct arylation polymerization (DArP) has emerged as an environmentally friendly, atom efficient method of synthesizing a variety of conjugated polymers. In this work, we report a one-pot approach consisting of DArP followed by Boc deprotection to synthesize a functional, surface-active adenine-containing poly(alkylthiophene). Careful control over the polymerization temperature enables the one-pot polymerization and deprotection strategy for synthesis, with quantitative (>99%) Boc deprotection achieved in 24 h. This temperature-controlled synthesis method reduces extra purification and isolation steps, which makes the total synthesis more efficient and practical, and allows higher molecular weight polymer to be made. We quantify the hydrogen bonding ability of the resulting adenine-containing polythiophene, T Ad -tT 4h , by 1 H NMR host–guest titration studies and analyze the results with the Benesi–Hildebrand model, yielding an association constant of 18.7 M –1 between alkylated thymine and T Ad -tT 4h . We demonstrate that T Ad -tT 4h robustly modifies the surface of cellulosic filter paper (CFP), and the modified cellulosic filter paper, CFP-T Ad -tT 4h , is an effective oil–water separatory filter with superhydrophobic properties (water contact angle (CA) ~151°). The utility of hydrogen bonding interactions between adenine and cellulose highlights the importance of side-chain engineering for creating functional materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Identifying the Catalytic Active Site for Propylene Metathesis by Supported ReO x Catalysts

A series of supported ReO x catalysts were investigated that allowed identifying the unique surface anchoring sites on oxide supports responsible for activating the surface ReO 4 sites for propylene metathesis (the catalytic active site). The catalysts were synthesized by incipient-wetness impregnation of aqueous HReO 4 onto the oxide supports (Al 2 O 3 , ZrO 2 , TiO 2 , SiO 2 and CeO 2 ), characterized under dehydrated and propylene metathesis reaction conditions with in situ spectroscopy (Raman, DRIFTS, UV-Vis and NAP-XPS), and chemically probed (CH 3 CH=CH 2 -TPSR, CH 2 =CH 2 /CH 3 CH=CHCH 3 titration and steady-state self-metathesis of propylene to ethylene and 2-butene). The initially calcined supported rhenia species anchor as isolated surface Re 7+ O 4 sites on the oxide supports by reacting with the surface hydroxyls (terminal S-OH, bridged S-OH-S and tricoordinated S 3 -OH) of the oxide supports. The specific oxide support was found to control the number of activated sites (Al 2 O 3 >> ZrO 2 > CeO 2 > TiO 2 > SiO 2 ) and propylene metathesis activity (Al 2 O 3 >> ZrO 2 >> TiO 2 ~ CeO 2 ~ SiO 2 ) revealing that the oxide support action is a potent ligand for the surface ReO x sites. The activation and specific activity of the surface ReO x sites depend on several factors (nature of surface hydroxyls (S 3 -OH > S-OH-S > S-OH), coordination of the oxide support surface cation (ZrO 7 , AlO 6 , CeO 4 ) and electronegativity of the oxide support cation (SiO 2 > Al 2 O 3 > TiO 2 > ZrO 2 > CeO 2 ). No relationships exist between olefin metathesis activity and acid strength of surface Lewis and Brønsted sites. Here, prior studies primarily focused on supported ReO x /Al 2 O 3 and the lack of examination of non-Al 2 O 3 supported rhenia catalysts precluded comparison between efficient and inefficient olefin metathesis catalysts, which prevented identifying the catalytic active site for olefin metathesis by supported ReO x catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Deactivation by Potassium Accumulation on a Pt/TiO 2 Bifunctional Catalyst for Biomass Catalytic Fast Pyrolysis

Biomass-derived feedstocks bring significant challenges to the longevity of the catalysts used for their conversion, and alkali metals, for example, K, in the feedstock have been widely ascribed as one of the important factors causing catalyst deactivation. To address this challenge, it is critical to understand the mechanism of catalyst deactivation caused by K accumulation to guide the improvement of catalysts and processes and the development of catalyst regeneration strategies. In this work, we report a deep understanding of the impact of K on a bifunctional Pt/TiO 2 catalyst, which is an efficient catalyst for the ex situ catalytic fast pyrolysis of biomass. We simulated the K-poisoning of Pt/TiO 2 catalysts by purposely loading different amounts of K (100-6000 ppm by weight) on the catalysts. A series of characterization approaches, including scanning transmission electron microscopy, Fourier transform infrared spectroscopy, and chemical titration, were combined with a kinetic assessment of multiple probe reactions to elucidate the mechanism of Pt/TiO 2 deactivation by K accumulation. At low K loadings (<800 ppm), K preferentially poisons the strong Lewis acid sites, leading to significantly reduced activity for acid-catalyzed alcohol dehydration. However, acetone condensation is less sensitive to the poisoning of strong Lewis acid sites. Reactions that occur on Pt sites or at the metal-support interface, including alkene hydrogenation, m-cresol hydrodeoxygenation (HDO), and CO oxidation, were not impacted. At high K loadings (>800 ppm), K starts to accumulate on the Pt-TiO 2 interfacial area, poisoning the interfacial active sites for HDO and CO oxidation reactions. We further found that the poisoning of the Pt/TiO 2 catalyst by K is reversible, and water washing can successfully remove the accumulated K and recover the activities for both alcohol dehydration and m-cresol HDO reactions.

09 BIOMASS FUELS↗
DOE OSTI2022

Molecular Design of Supported MoO x Catalysts with Surface TaO x Promotion for Olefin Metathesis

A series of supported 3% MoOx catalysts were synthesized by incipient-wetness impregnation of 5%-15% TaO x surface modified γ-Al 2 O 3 support. The catalysts were characterized by in situ spectroscopies (DRIFTS, Raman, UV-vis, XAS) and multiple chemical probes (C 2 H 4 /C 4 H 8 titration, C 3 H 6 -TPSR, steady state propylene metathesis, NH 3 -IR adsorption). The supported tantalum oxide phase was present as surface TaO x sites on the γ-Al 2 O 3 support that capped that Al 2 O 3 surface hydroxyls. The change in available surface hydroxyls caused the subsequent anchoring of MoOx species to occur at different surface hydroxyls. This shifted the anchoring of MoO x species from basic (Al-OH) to neutral (Al 2 -OH) to more acidic (Al 3 -OH) surface hydroxyls as well as perturbation of the remaining alumina surface hydroxyls by the surface TaO x sites. The TaO x surface modified γ-Al 2 O 3 support increased the number of activated surface MoO x sites (Ns) by ~6x and the TOF by ~10x resulting in an increased activity of ~60x. In conclusion, It was found that the specific anchoring surface hydroxyls rather than the extent of oligomerization of the surface MoO x sites control the number of activated MoO x sites and TOF for propylene metathesis. No relationship between the nature of the surface Lewis/Brønsted acid sites and Ns and TOF were found to be present.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Kinetic and X-ray Absorption Spectroscopic Analysis of Catalytic Redox Cycles over Highly Uniform Polymetal Oxo Clusters

Metal–organic framework materials (MOFs) offer an opportunity for investigating catalytic properties of polymetal oxo clusters that are highly well defined and uniform in nature, in contrast to other classes of catalysts that may exhibit a propensity toward active site heterogeneity. We report herein a kinetic and X-ray absorption spectroscopy (XAS) analysis of the two-electron oxidation of CO over divalent metal sites in MIL-100(M = Fe, Cr) (MIL = Materials of Institut Lavoisier) materials carrying μ 3 -oxo bridged trimers, and connect observations about the kinetic relevance of redox steps to density functional theory (DFT) predictions published previously. The high degree of uniformity evident from in situ titration measurements leads to a congruence in mechanistic inferences made from steady-state catalytic, transient stoichiometric, isotopic exchange, and isotopic tracer data that all point to a sequential mechanism comprised of separate oxidation and reduction half-cycle steps conjoined by an active oxygen intermediate. In situ XAS data reinforce mechanistic conclusions derived from kinetic analysis, and suggest that the active oxygen intermediate may be more appropriately characterized as an iron-oxyl (Fe 3+ –O – ) rather than an iron-oxo (Fe 4+ =O 2– ) species. The Cr analogue of MIL-100 exhibits contrasting rate features that can be rationalized using an identical sequence of steps as MIL-100(Fe), but with a highly dissimilar set of kinetic parameters that can also be validated using transient stoichiometric experiments. The larger coverages of active oxygen intermediates on MIL-100(Cr) are consistent with predictions from prior DFT studies that suggest more stable and less reactive active oxygen species for metals with lower d-electron counts, and point to metal identity as a lever for precisely controlling the kinetic relevance of oxidation and reduction half-cycles in catalytic redox sequences over polymetal oxo clusters. Importantly, the results presented point to the utility of developing broadly applicable structure–catalytic property relationships over MOF nodes specifically, and highly uniform catalysts more generally.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Restructuring of the Lewis Acid Sites in Y-Modified Dealuminated Beta-Zeolite by Hydrothermal Treatment

Yttrium-modified dealuminated Betazeolite (Y-BEA) represents a type of Lewis acid zeolite that has gained attention for its potential to efficiently catalyze the conversion of biomass-derived oxygenates. The structure of the Y active sites and their dynamics during biomass conversion reactions, which normally involve substantial amounts of water, necessitate thorough investigation for the rational design of more active and stable catalysts. Here, we conducted a study where a series of Y-BEA catalysts with different yttrium loadings (1–7 wt.%) were subjected to hydrothermal treatment (450 °C, 20% water) and investigated for their structural and catalytic activity changes through a combination of multiple characterizations and kinetic measurements. The number of acid sites of Y-BEA decreased without a change in acid strength following the hydrothermal treatment, which was confirmed by the results of acid site titration, infrared spectroscopy of probe molecules, and kinetic measurements for probe reactions (acetone aldol condensation). Structural analysis using X-ray diffraction (XRD), specific surface area measurement, X-ray absorption spectroscopy (XAS), and X-ray photoelectron spectroscopy (XPS) demonstrated that both the zeolite structure and the isolation status of the Y site remain intact after hydrothermal treatment. Further, the Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS) spectra, thermogravimetric analysis (TGA), and operando 1 H and 29 Si magic-angle spinning (MAS) nuclear magnetic resonance (NMR) revealed the dehydroxylation of Y-BEA induced by hydration-rearrangement-condensation restructuring during the high-temperature steam treatment. Dehydroxylation affects the structure of Y sites by reducing their vicinal silanol sites. In conclusion, this conversion of Lewis acidic Y sites into nonacidic sites is the primary factor behind the change in acid site quantity and catalytic activity on Y-BEA.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Hydrogen Adsorption, Reactivity, and Catalysis on Colloidal Iron Carbide Nanoparticles

Supported iron carbide particles have long served as catalysts for CO hydrogenation (the Fischer Tropsch synthesis, FTS) and continue to be attractive. Despite this, little is known about their chemistry. Reported here is a colloidal Fe x C nanoparticle (NP) model system that allows direct observation of surface hydrogen and CO, as well as quantification of the surface H. Dodecylamine-capped Fe x C NPs (DDA-Fe x C NPs) were synthesized through solution-phase carburization of Fe NPs and form stable colloids in low-polarity organic solvents. Treatment of these colloids with H 2 or D 2 produced highly hydrogenated materials, and FTIR spectra of DDA-Fe x C-D n showed that most of the D binds to carbides, with at least four distinct v(C-D) modes. The surface C-H(D) bonds were all reactive, transferring hydrogen to alkenes and other reagents in solution. Titration and ICP measurements showed a 0.17:1 ratio of added H:total Fe, or roughly. 40 H per 1.8 nm DDA-Fe x C NP. Conversely, CO was preferentially bound to surface Fe sites, with FTIR spectra showing a single broad v(CO) that shifted with CO coverage or co-adsorption of H 2 . The DDA-Fe x C NPs were active catalysts for both olefin hydrogenation and the FTS, under mild conditions and without catalyst pre-treatment. The CO hydrogenation reactions yielded a broad distribution of long-chain linear paraffins and olefins. Though quantitative comparisons with typical FTS results are not possible because of our use of sealed batch reactors and other factors, the observations of high catalytic reactivity demonstrate the relevance of this model system to iron-carbide catalysis. DFT calculations on model slab surfaces with varying iron carbide stoichiometries revealed that the thermodynamically preferred surface adsorption sites are C for H ads and Fe for CO ads . A variety of binding sites and binding energies were found for each adsorbate. We are unaware of previous studies indicating that a diverse array of C-H bonds is the primary source of reactive H on iron carbides. Experimentally, the diversity of *C-H sites was evident in reactions with H-atom donors and abstractors of different strengths, from both the reaction stoichiometries and IR spectra. The different surface–H binding energies correlate with the v(C-D) stretching frequencies. Furthermore, these insights into complex iron carbide surfaces and catalysis could assist catalyst design, and they showcase the importance of stoichiometric studies of reaction intermediates.

08 HYDROGEN↗
DOE OSTI2025

Metal–Oxide Interface Sites Created Using Atomic Layer Deposition and Tested for CO Oxidation

The performance of catalysts made out of Pt supported on TiO 2 thin films grown on SBA-15 (a silica mesoporous material) by atomic layer deposition (ALD) was characterized systematically by combining in situ infrared absorption spectroscopy (IR) with other techniques including electron microscopy and adsorption−desorption isothermal measurements. The titania films in the resulting high-surface-area catalysts were evenly distributed throughout the inner surface of the SBA-15 mesopores, and their thickness could be controlled at a submonolayer level, with 3 to 4 TiO 2 ALD cycles needed for the complete coverage of the silica sites. The titania films could be deposited either before or after adding the metal (Pt), which was dispersed in the form of small nanoparticles (NPs) approximately 4−6 nm in diameter, in order to exert some control on the density and nature of the Pt/TiO 2 interface sites. One important lesson deriving from this work is that such an order of deposition leads to significantly different catalysts in spite of the fact that most of their structural properties are similar. If the Pt is deposited on the titania films, the resulting metal NPs are slightly smaller than those grown on silica and display CO adsorption sites with lower surface Pt coordination numbers. On the other hand, when TiO 2 is deposited on the Pt/SBA-15 starting material, some titania grows on the metal and partially blocks its surface while also creating new interface sites where CO binds more weakly and displays lower C−O stretching frequencies. In terms of catalytic performance, the results from in situ IR CO site titration and kinetic measurements combined suggest a mechanism where CO first adsorbs on Pt atop sites and then migrates to Pt/TiO 2 interface sites, where oxidation takes place. Both types of sites appear to be similar in all the catalysts tested, but catalytic performance could be optimized by tuning their surface densities. Maximum catalytic activity was obtained when the TiO2 films were deposited first and with TiO 2 coverages of at least half a monolayer, that is, after at least 2 ALD cycles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗