Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TEMPERATURE GRADIENTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Temperature distributions and gradients in laser-heated plasmas relevant to magnetized liner inertial fusion

We present two-dimensional temperature measurements of magnetized and unmagnetized plasma experiments performed at Z relevant to the preheat stage in magnetized liner inertial fusion. The deuterium gas fill was doped with a trace amount of argon for spectroscopy purposes, and time-integrated spatially resolved spectra and narrow-band images were collected in both experiments. The spectrum and image data were included in two separate multiobjective analysis methods to extract the electron temperature spatial distribution T e ( r , z ) . The results indicate that the magnetic field increases T e , the axial extent of the laser heating, and the magnitude of the radial temperature gradients. Comparisons with simulations reveal that the simulations overpredict the extent of the laser heating and underpredict the temperature. Temperature gradient scale lengths extracted from the measurements also permit an assessment of the importance of nonlocal heat transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRSDate not supplied

Validation of Cryogenic Propellant Tank Self-Pressurization by Leveraging Reduced Order Modeling within Computational Fluid Dynamics Simulation

Validation of cryogenic propellant tank self-pressurization was performed using a hybrid Computational Fluid Dynamics (CFD) and reduced order modeling methodology. Data from a liquid hydrogen ground test conducted at the K-site facility at the National Aeronautics and Space Administration (NASA) Glenn Research Center was used for the validation effort. Liquid phase dynamics were explicitly resolved with a CFD tool. Vapor phase dynamics were modeled as a point mass that communicated heat from the tank wall to the liquid phase via a boundary condition used at the gas-liquid interface. The method proved to be more accurate, robust, and efficient than explicit resolution of the dynamics using a standard Volume of Fluid (VOF) methodology. The subject pressurization process was found to be heavily dependent upon both the relatively high liquid temperature gradient near the gas-liquid interface and the natural convection flow path. Modeling the gas-liquid interface as an immovable surface eliminated temperature gradient destroying gas-liquid interface velocities observed in VOF simulations, and correspondingly enabled more rapid simulation since interface advection was not allowed. The single phase computational domain also facilitated the ability to demonstrate spatial resolution convergence of natural convection cells within the liquid which significantly impacted the tank pressurization rate. This work was used to demonstrate the critical physics for tank self-pressurization and numerical methodologies that may be used to best resolve those physics. The findings informed development and operation of production level CFD tools used in the Fluid Dynamics Branch at NASA Marshall Space Flight Center.

J. M. Brodnick↗
DOE OSTI2025

A subgrid model for electron-scale turbulent transport in global ion-scale gyrokinetic simulations of tokamak plasmas

A subgrid electron–temperature–gradient (ETG) model is demonstrated here which averages local electron-scale turbulence over intermediate scales in space and time to include in global ion–temperature–gradient (ITG) simulations. This approach results in ion-scale equations, which incorporate the electron heat transport from ETG turbulence and the effects of electron-scale turbulence on the ion scale. Flux-tube ETG Cyclone Base Case simulations are performed at different radial locations and a kinetic form of the flux is added to global ion-scale (IS) simulations as a source term. Analytic radial profiles of ETG heat flux are constructed and compared to flux-tube results at multiple radial locations. Different ratios of ITG to ETG heat flux levels are considered and the results of capturing ETG heat transport in global ion-scale simulations are discussed. The potential coupling of the ETG streamer potential and intermediate-scale zonal flows to the ion scale is further addressed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2003

Pore Formation and Mobility Investigation (PFMI): Concept, Hardware Development, and Initial Analysis of Experiments Conducted Aboard the International Space Station

Porosity in the form of "bubbles and pipes" can occur during controlled directional solidification processing of metal alloys. This is a consequence that 1) precludes obtaining any meaningful scientific results and 2) is detrimental to desired material properties. Unfortunately, several Microgravity experiments have been compromised by porosity. The intent of the PFMl investigation is to conduct a systematic effort directed towards understanding porosity formation and mobility during controlled directional solidification (DS) in a microgravity environment. PFMl uses a pure transparent material, succinonitrile (SCN), as well as SCN "alloyed" with water, in conjunction with a translating temperature gradient stage so that direct observation and recording of pore generation and mobility can be made. PFMl is investigating the role of thermocapillary forces and temperature gradients in affecting bubble dynamics as well as other solidification processes in a microgravity environment. This presentation will cover the concept, hardware development, operations, and the initial results from experiments conducted aboard the International Space Station.

Grugel, Richard N.↗
NASA NTRS2004

Pore Formation and Mobility Investigation (PFMI): Concept, Hardware Development and Initial Analysis of Experiments

Porosity in the form of "bubbles and pipes" can occur during controlled directional solidification processing of metal alloys. This is a consequence that 1) precludes obtaining any meaningful scientific results and 2) is detrimental to desired material properties. Unfortunately, several Microgravity experiments have been compromised by porosity. The intent of the PFMI investigation is to conduct a systematic effort directed towards understanding porosity formation and mobility during controlled directional solidification (DS) in a microgravity environment. PFMI uses a pure transparent material, succinonitrile (SCN), as well as SCN "alloyed" with water, in conjunction with a translating temperature gradient stage so that direct observation and recording of pore generation and mobility can be made. PFMI is investigating the role of thermocapillary forces and temperature gradients in affecting bubble dynamics as well as other solidification processes in a microgravity Environment. This presentation will cover the concept, hardware development, operations, and the initial results from experiments conducted aboard the International Space Station. .

Grugel, Richard N.↗
DOE OSTI2021

Testing predictions of electron scale turbulent pedestal transport in two DIII-D ELMy H-modes

In this study, we present linear and nonlinear gyrokinetic analyses in the pedestal region of two DIII-D ELMy H-mode discharges using the CGYRO code. The otherwise matched discharges employ different divertor configurations to investigate the impact of varying recycling and particle source on pedestal profiles. Linear gyrokinetic simulations find electrostatic ion-scale instabilities (ion temperature gradient and trapped electron modes, ITG-TEM) are present just inside the top of the pedestal with growth rates that are enhanced significantly by parallel velocity shear. In the sharp gradient region, E x B shearing rates are comparable or larger than ion scale growth rates, suggesting the suppression of ITG-TEM modes in this region. Instead, the electron temperature profiles are found to be correlated with and just above the electron temperature gradient (ETG) instability thresholds. Using gradients varied within experimental uncertainties, nonlinear electron-scale gyrokinetic simulations predict electron heat fluxes from ETG turbulence, that when added to neoclassical ion thermal transport simulated by NEO, account for 30-60% of the total experimental heat flux. In addition, the neoclassical electron particle flux is found to contribute significantly to the experimental fluxes inferred from SOLPS-ITER analysis. Additional nonlinear gyrokinetic simulations are run varying input gradients to develop a threshold-based reduced model for ETG transport, finding a relatively simple dependence on η e = L ne /L Te . Predictive transport simulations are used to validate this pedestal-specific ETG model, in conjunction with a model for neoclassical particle transport. In both discharges, the predicted electron temperatures are always overpredicted, indicative of the insufficient stiffness in the ETG pedestal model to account for all of the experimental electron thermal transport. In the case of the closed divertor discharge with lower particle source, the predicted electron density is close to the experiment, consistent with the magnitude of neoclassical particle transport in that discharge. However, the density profiles are overpredicted in the open divertor discharge (larger particle source), due to insufficient model transport. In conclusion, the implications for other mechanisms accounting for the remainder of transport in the sharp gradient region in the two discharges are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2005

Morphological Evolution of Directional Solidification Interfaces in Microgravity: An Analysis of Model Experiments Performed on the International Space Station

A series of experiments performed using the Pore Formation and Mobility Investigation (PFMI) apparatus within the glovebox facility (GBX) on board the International Space Station (ISS) has provided video images of the morphological evolution of a three-dimensional interface in a diffusion controlled regime. The experimental samples were prepared on ground by filling glass tubes, 1 cm ID and approximately 30 cm in length, with "alloys" of succinonitrile (SCN) and water in an atmosphere of nitrogen at 450 millibar pressure. The compositions of the samples processed and analyzed are 0.25,0.5 and 1.0 wt% water. Experimental processing parameters of temperature gradient and translation speed, as well as camera settings, were remotely monitored and manipulated from the ground Telescience Center (TSC) at the Marshall !3pace Flight Center. During the experiments, the sample was first subjected to a unidirectional melt back, generally at 10 microns per second, with a constant temperature gradient ahead of the melting interface. Following the melt back, the interface was allowed to stabilize before translation is initiated. The temperatures in the sample were monitored by six in situ thermocouples and the position is monitored by an optical linear encoder. For the experiments performed and analyzed, the gradients ranged from 2.5 - 3.3 K/mm and the initial pulling velocities ranged from 0.7 micron per second to 1 micron per second with subsequent transition velocities of up to 100 microns per second. The data provided by the PFMI for analysis includes near-real-time (NRT) video captured on the ground during the experiment runs, ISS Video Tape Recorder (VTR) data dumped from the VTR at the end of the experiment run and recorded on the ground, telemetry data including temperature and position measurements, and limited flight HI-8 tapes in 2 camera views of experiment runs for which tapes have been returned to the investigators from ISS. Because of limited down mass from the ISS, the majority of the initial analysis has been performed using the NRT and VTR video data but will be supplemented with the HI-8 video as it becomes available. hardware and procedures required to prepare samples for correlation to flight samples is described. Using this ground-based system, a series of experiments have been performed for direct comparison with the flight data. The results of these comparisons as well as implications to future microgravity experiments are presented and discussed. A ground-based thin-sample directional solidification system as well as all associated

Strutzenberg, Louise L.↗
DOE OSTI2024

Measurement bias in self-heating x-ray free electron laser experiments from diffraction studies of phase transformation in titanium

X-ray self-heating is a common by-product of X-ray Free Electron Laser (XFEL) techniques that can affect targets, optics, and other irradiated materials. Diagnosis of heating and induced changes in samples may be performed using the x-ray beam itself as a probe. However, the relationship between conditions created by and inferred from x-ray irradiation is unclear and may be highly dependent on the material system under consideration. Here, we report on a simple case study of a titanium foil irradiated, heated, and probed by a MHz XFEL pulse train at 18.1 keV delivered by the European XFEL using measured x-ray diffraction to determine temperature and finite element analysis to interpret the experimental data. We find a complex relationship between apparent temperatures and sample temperature distributions that must be accounted for to adequately interpret the data, including beam averaging effects, multivalued temperatures due to sample phase transitions, and jumps and gaps in the observable temperature near phase transformations. The results have implications for studies employing x-ray probing of systems with large temperature gradients, particularly where these gradients are produced by the beam itself. Finally, this study shows the potential complexity of studying nonlinear sample behavior, such as phase transformations, where biasing effects of temperature gradients can become paramount, precluding clear observation of true transformation conditions.

Crystallography↗
NASA NTRS1992

The effects of thermal gradients on the Mars Observer Camera primary mirror

The paper discusses the effect of thermal gradients on the optical performance of the primary mirror of Mars Observer Camera (MOC), which will be launched on the Mars Observer spacecraft in September 1992. It was found that mild temperature gradients can have a large effect on the mirror surface figure, even for relatively low coefficient-of-thermal-expansion materials. However, in the case of the MOC primary mirror, it was found that the radius of curvature (ROC) of the reflective surface of the mirror changed in a nearly linear fashion with the radial temperature gradient, with little additional aberration. A solid-state ROC controller using the thermal gradient effect was implemented and verified.

Applewhite, Roger W.↗
NASA NTRS1985

The Hadley and Rossby regimes in a spherical atmosphere

The properties of the steady Hadley and Rossby regimes for a thermally forced rotating fluid on a sphere are studied. The two layer modified geostrophic model is employed which allows for thermal advection by the divergent wind and time dependent static stability. Heating processes are parameterized using the Newtonian approximation and Rayleigh friction is accounted for. The equations are transformed to spectral form using spherical harmonics and then truncated retaining a simple axisymmetric state and initial, one wave. A time independent Hadley circulation is obtained which is neutral to axisymmetric disturbances but unstable to wave like perturbations for intermediate values of the meridional temperature gradient, indicating the existence of both an upper and lower symmetric Hadley regime. An analytical solution for the steady Rossby circulation is determined for values of the meridional temperature gradient where the Hadley regime is unstable. Linear perturbation theory is used to show that within the steady Rossby regime two or more waves cannot exist simultaneously.

Feldstein, S. B.↗
DOE OSTI2024

Chain-length-controllable upcycling of polyolefins to sulfate detergents

Escalating global plastic pollution and the depletion of fossil-based resources underscore the urgent need for innovative end-of-life plastic management strategies in the context of a circular economy. Thermolysis is capable of upcycling end-of-life plastics to intermediate molecules suitable for downstream conversion to eventually high-value chemicals, but tuning the molar mass distribution of the products is challenging. Here, in this study, we report a temperature-gradient thermolysis strategy for the conversion of polyethylene and polypropylene into hydrocarbons with tunable molar mass distributions. The whole thermolysis process is catalyst- and hydrogen-free. The thermolysis of polyethylene and polyethylene/polypropylene mixtures with tailored temperature gradients generated oil with an average chain length of ~C 14 . The oil featured a high concentration of synthetically useful α-olefins. Computational fluid dynamics simulations revealed that regulating the reactor wall temperature was the key to tuning the hydrocarbon distributions. Subsequent oxidation of the obtained α-olefins by sulfuric acid and neutralization by potassium hydroxide afforded sulfate detergents with excellent foaming behaviour and emulsifying capacity and low critical micelle concentration. Overall, this work provides a viable approach to producing value-added chemicals from end-of-life plastics, improving the circularity of the anthropogenic carbon cycle.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1985

Interannual variability of middle atmosphere during northern winter

An investigation was undertaken to examine the characteristics of the interannual variability of the zonal wind and the temperature of the middle atmosphere of the Northern Hemisphere during winter and to search for a relationship of the variability of the middle atmosphere with the activity of the following Indian summer monsoon. For this purpose, the rocketsonde temperature and wind data for 8 stations for a 6-year period for the month of January were collected. It is clear from the results that the interannual variability noticed in the zonal wind of the high latitude middle atmosphere was caused by the differential activity of the long-period planetary waves. In order to examine whether the stability of the polar night jet in the high latitude middle atmosphere has any influence on the spectacular tropospheric weather phenomenon such as the Indian summer monsoon, the rainfall activity for India has been studied. The study revealed that: (1) the strong and stable polar night jet with weak equator to pole temperature gradient at the stratopause in January was linked with the forthcoming weak monsoon activity; and (2) the weak and distorted polar night jet with strong equator-to-pole temperature gradient at the stratopause in January was linked with the forthcoming strong monsoon activity.

Mukherjee, B. K.↗
DOE OSTI2022

Seasonally and Regionally Dependent Shifts of the Atmospheric Westerly Jets under Global Warming

A distinct feature of the atmospheric circulation response to increasing greenhouse gas forcing is the poleward shift of the zonal-mean westerly jet. The dynamical mechanisms of the zonal-mean poleward jet shift have been extensively studied in literature. At seasonal/regional scales, however, the westerly jets can shift equatorward, such as in the early-summer Asia–Pacific region, the late-winter America–Atlantic region, and the winter/spring east Pacific. These equatorward jet shifts imply climate impacts distinct from those of the poleward shifts, yet their causes are not well understood. In this work, based on a hierarchy of coupled, prescribed-SST, and aquaplanet simulations, we attribute the seasonal/regional equatorward jet shifts to the enhanced tropical upper-level warming (ETUW), which arises from both the tropical moist adiabat and the enhanced equatorial surface warming. By steepening the meridional temperature gradient in the subtropical upper-to-middle level and assisted by positive eddy feedback, the ETUW increases the zonal wind equatorward of the climatological jet. When the regional/seasonal meridional temperature gradients (or equivalently the westerly jets) are weak and peak close to the tropics, the ETUW effect overcomes the poleward jet-shift mechanisms and leads to the equatorward jet shifts. This climatological-state dependency is consistently seen in the decomposed jet responses to uniform warming and surface warming pattern, and further demonstrated through idealized aquaplanet experiments with designed climatological states. For uniform warming, the ETUW arising from moist adiabat makes the general poleward jet shifts insignificant in the aforementioned favorable regions/seasons. For warming pattern, the ETUW from enhanced equatorial warming drives substantial equatorward jet shifts in these favorable seasons/regions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Evaluation of Ocean Biogeochemistry and Carbon Cycling in CMIP Earth System Models With the International Ocean Model Benchmarking (IOMB) Software System

Abstract The International Ocean Model Benchmarking (IOMB) software package is a new community resource that we use here to evaluate surface and upper ocean biogeochemical variables and integrated anthropogenic carbon uptake from earth system models (ESMs) contributing to the 5th and 6th phases of the Coupled Model Intercomparison Project (CMIP5 and CMIP6). IOMB generates graphics and tables for systematically comparing model predictions against multiple datasets. Our analysis reveals some improvement in the multi‐model mean from CMIP5 to CMIP6 for most of the variables we examined. Compared to data‐constrained estimates of ocean anthropogenic carbon uptake for the 1994–2007 period, negative biases exist for many models between 30 and 50°S. Global model estimates of anthropogenic carbon uptake for the same period do not change significantly from CMIP5 to CMIP6, with the combined ensemble mean estimate of 27.8 ± 0.5 Pg C lower than a data‐constrained estimate of 33.0 ± 4.0 Pg C. At the same time, the change in the natural carbon inventory from CMIP is estimated to be a source of 0.7 ± 0.3 Pg C, which is considerably smaller in magnitude than a data‐constrained estimate of 5.0 ± 3.0 Pg C. With chlorofluorocarbon (CFC) predictions available for several models, we demonstrate that negative anthropogenic dissolved inorganic carbon biases coincide with negative biases in CFC concentration, highlighting the importance of weak exchange between the surface and interior ocean in regulating rates of anthropogenic carbon uptake. To examine the robustness of this attribution across the CMIP models, we calculate the global vertical temperature gradient between 200 and 1,000 m as a metric for global stratification and exchange between the surface and deeper waters. We find a linear relationship between the bias of the vertical temperature gradients and the bias in global anthropogenic carbon uptake, consistent with the hypothesis that model biases in anthropogenic carbon uptake are related to biases in surface‐to‐interior exchange by physical processes.

58 GEOSCIENCES↗
DOE OSTI2020

RF current condensation in the presence of turbulent enhanced transport

Sharp temperature gradients in a magnetically confined plasma can lead to turbulent motion of the plasma. This turbulence in turn enhances the transport of heat across magnetic field lines. The enhanced transport impacts the temperature differential that can be sustained in magnetic islands between the island center and its periphery. It is shown in this work that, by limiting this temperature differential, this enhanced transport can have a profound influence on the extent to which the RF current condensation effect stabilizes the island growth. Interestingly, because the heat transport is no longer simply linear in the temperature gradient, the RF current condensation effect also exhibits entirely new hysteresis phenomena.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1982

Experimental observation of the thermocapillary driven motion of bubbles in a molten glass under low gravity conditions

An experiment was carried out on board a Space Processing Applications Rocket with the aim of demonstrating bubble migration in molten glass due to a temperature gradient under low gravity conditions. During the flight, a sample of a sodium borate melt with a specific bubble array, contained in a platinum/fused silica cell, was subjected to a well defined temperature gradient for more than 4 minutes. Photographs taken at one second intervals during the experiment clearly show that the bubbles move toward the hot spot on the platinum heater strip. This result is consistent with the predictions of the theory of thermocapillary driven bubble motion.

Smith, H. D.↗
NASA NTRS1984

Convective thermocapillary instabilities in liquid bridges

A steady shear flow is generated in an axisymmetric liquid bridge surrounded by a passive gas through the imposition of a temperature gradient along the bridge and the driving of the motion by thermocapillarity. This dynamic state is susceptible to convective instabilities, which can lead to propagating hydrothermal waves that feed on the underlying temperature gradients. The convective instabilities of axisymmetric return flow are presently given as functions of the liquid's Prandtl number and the surface Biot number of the interface.

Xu, J.-J.↗