Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TELEVISION CAMERAS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Windowless Airplane With A View

Proposed windowless passenger airplane gives passengers views of the outside but would be stronger, weigh less, and cost less than does conventional airplane of equivalent capacity. Ordinary see-through windows of today's commercial aircraft replaced by flat-panel color television screens connected to outward-looking video cameras in fuselage.

Carden, Huey D.↗

STS-81 Flight Day 3

On this third day of the STS-81 mission, the flight crew, Cmdr. Michael A. Baker, Pilot Brent W. Jett, Mission Specialists, John M. Grunsfeld, Marsha S. Ivins, Peter J.K. Wisoff, and Jerry M. Linenger, spend most of their workday completing preparations for the rendezvous and linkup of the Space Shuttle with the Mir Space Station. Pilot Brent Jett finishes the checkout of navigation tools that will be used during the rendezvous. Later he joins John Grunsfeld and they install a camera in the Orbiter Docking System to provide television views of the docking target on the Mir. Commander Mike Baker will use this later as he flies Atlantis to its docking with Mir.

Source record↗

Theodolite with CCD Camera for Safe Measurement of Laser-Beam Pointing

The simple addition of a charge-coupled-device (CCD) camera to a theodolite makes it safe to measure the pointing direction of a laser beam. The present state of the art requires this to be a custom addition because theodolites are manufactured without CCD cameras as standard or even optional equipment. A theodolite is an alignment telescope equipped with mechanisms to measure the azimuth and elevation angles to the sub-arcsecond level. When measuring the angular pointing direction of a Class ll laser with a theodolite, one could place a calculated amount of neutral density (ND) filters in front of the theodolite s telescope. One could then safely view and measure the laser s boresight looking through the theodolite s telescope without great risk to one s eyes. This method for a Class ll visible wavelength laser is not acceptable to even consider tempting for a Class IV laser and not applicable for an infrared (IR) laser. If one chooses insufficient attenuation or forgets to use the filters, then looking at the laser beam through the theodolite could cause instant blindness. The CCD camera is already commercially available. It is a small, inexpensive, blackand- white CCD circuit-board-level camera. An interface adaptor was designed and fabricated to mount the camera onto the eyepiece of the specific theodolite s viewing telescope. Other equipment needed for operation of the camera are power supplies, cables, and a black-and-white television monitor. The picture displayed on the monitor is equivalent to what one would see when looking directly through the theodolite. Again, the additional advantage afforded by a cheap black-and-white CCD camera is that it is sensitive to infrared as well as to visible light. Hence, one can use the camera coupled to a theodolite to measure the pointing of an infrared as well as a visible laser.

Crooke, Julie A.↗

Encoding Television Signals For Better Color

Coding scheme for transmission of color-television pictures reduces crosstalk between chrominance and luminance. Picture elements arranged in zigzag pattern to accommodate scanning. Resulting chrominance signal combined with horizontally and vertically interlaced output of luminance scan converter to form composite color signal. Applicable to color-video cameras with solid-state image-sensing devices using National Television System Committee (NTSC) standard color-television system, or other systems.

Marchman, R. H.↗

Study of magnetic perturbations on SEC vidicon tubes

A laboratory measurements program was conducted to determine the tolerances that must be imposed to achieve optimum performance from SEC-vidicon data sensors in the LST mission. These measurements along with other data were used to formulate recommendations regarding the necessary telemetry and remote control for the television data sensors when in orbit. The study encompassed the following tasks: (1) Conducted laboratory measurements of the perturbations which an external magnetic field produces on a magnetically focused, SEC-vidicon. Evaluated shielding approaches. (2) Experimentally evaluated the effects produced on overall performance by variations of the tube electrode potentials, and the focus, deflection and alignment fields. (3) Recommended the extent of ground control of camera parameters and camera parameter telemetry required for optimizing the performance of the television system in orbit. The experimental data are summarized in a set of graphs.

Long, D. C.↗

Voyager imaging experiment

The Voyager imaging experiment, which involves two independently operated television systems (a narrow- and a wide-angle camera), is designed to conduct investigations of the atmospheres and surface properties of Jupiter, Saturn, their satellites and Saturn's rings. Objects of the investigations include the horizontal and vertical structure of visible clouds, the vertical structure of high, optically thin scattering layers on Jupiter and Saturn, the Great Red Spot, the South Equatorial Belt, chromophores on Io and Titan, the geology of several satellites, the masses, spin axes and periods of rotation of several satellites, the radial distribution of material in Saturn's rings, and the optical scattering properties of the primaries, rings, and satellites at a variety of wavelengths and phase angles.

Smith, B. A.↗

Subpixel Resolution In Depth Perceived Via 3-D Television

Report describes experiment in which two black vertical bars on featureless white background placed near intersection of optical axes of two charge-coupled-device video cameras positioned to give stereoscopic views. Trained human observers found to perceive depths at subpixel resolutions in stereoscopic television images. This finding significant for remote stereoscopic monitoring, expecially during precise maneuvers of remotely controlled manipulators. Also significant for research in processing of visual information by human brain.

Diner, Daniel B.↗

Determining iconometric parameters of imaging devices using a wide-angle collimator

The problem of determining the iconometric parameters of the imaging device can be solved if the camera being calibrated is used to obtain the image of a group of reference points, the directions to which are known. In order to specify the imaging device coordinate system, it is sufficient in principle to obtain on the picture the images of three reference points which do not lie on a single straight line. Many more such points are required in order to determine the distortion corrections, and they must be distributed uniformly over the entire field of view of the camera being calibrated. Experimental studies were made using this technique to calibrate photographic and phototelevision systems. Evaluation of the results of these experiments permits recommending collimators for calibrating television and phototelevision imaging systems, and also short-focus small-format photographic cameras.

Ziman, Y. L.↗

High resolution solar X-ray studies

Two high resolution solar X-ray payloads and their launches on Aerobee rockets with pointing system are described. The payloads included 5 to 25A X-ray spectrometers, multiaperture X-ray cameras, and command box attitude control inflight by means of a television image radioed to ground. Spatial resolution ranged from five arc minutes to ten arc seconds and spectral resolution ranged from 500 to 3000. Several laboratory tasks were completed in order to achieve the desired resolution. These included (1) development of techniques to align grid collimators, (2) studies of the spectrometric properties of crystals, (3) measurements of the absorption coefficients of various materials used in X-ray spectrometers, (4) evaluation of the performance of multiaperture cameras, and (5) development of facilities.

Blake, R. L.↗

Electronic magnification for astronomical camera tubes

Definitions, test schemes, and analyses used to provide variable magnification in the image section of the television sensor for large space telescopes are outlined. Experimental results show a definite form of magnetic field distribution is necessary to achieve magnification in the range 3X to 4X. Coil systems to establish the required field shapes were built, and both image intensifiers and camera tubes were operated at high magnification. The experiments confirm that such operation is practical and can provide satisfactory image quality. The main problem with such a system was identified as heating of the photocathode due to concentration of coil power dissipation in that vicinity. Suggestions for overcoming this disadvantage are included.

Vine, J.↗

AIROscope stellar acquisition

The acquisition system which operates in conjunction with a balloon-borne TV system, boresighted to a telescope is described. It has two main functions, a star field monitor and an offset star tracker. The design of the system was strongly influenced by the TV camera, which uses the same interlaced scanning system as is employed in commercial television broadcasting. To reduce power and bandwidth requirements, the star field information transmitted in our system consists only of the horizontal and vertical coordinates of each star and its brightness. As a star field monitor the system provides video thresholding, camera blemish suppression, coordinate digitization in 3 axes, circuity to recognize as single star the dispersed video signals resulting from one star overlapping adjacent scanning lines and storage of all signals for readout by the telemetry at appropriate times.

Deboo, G. J.↗

Adaptive and learning control of large space structures

The paper describes the adaptive learning system for space operations which assumes that structural testing can be conducted during deployment and assembly. Simulation results using the solar electric propulsion array and a novel remote sensor are presented; they involve faster scan television coverage of the motions of the array from four cameras on the corners of the Space Shuttle payload bay. The description of the simulation, the filtering algorithm for processing the TV data, the parameter extraction algorithm, and the simulation results are presented.

Montgomery, R. C.↗

Signal Processor Development by Personnel of the JSC Signal Processing Section

The purpose of this paper is to describe systems and components of systems developed by personnel in the Signal Processing Section of the Tracking and Communications Division. The scope of this includes past developments which are in current use in NASA flight operations and future developments which are targeted for upcoming NASA applications. These projects specifically are: (1) NASA High Definition Television (HDTV) Project, (2) Video Codecs, (3) NASA Electronic Still Camera (ESC) Project, (4) Hercules Payload, (5) Ku-band Communications Adapter (KCA), (6) Windows Drivers for Satellite Interfacing to Commercial Equipment, and (7) Advanced Statistical Multiplexers. The methods used to determine what projects should be done in-house as opposed to which should not is based in NASA applications versus commercially available systems to meet those applications. If a commercial-off-the-shelf (COTS) component or system is available which meets the need, the first choice is to use COTS equipment. If it is not, and there is a NASA requirement, it is developed in-house. This results in technology which is being developed which otherwise was not available. Personnel involved in these projects have been contacted by many commercial companies interested in licensing or obtaining the NASA design.

Holland, S. Douglas↗

Real-Time Acquisition and Display of Data and Video

This paper describes the development of a prototype that takes in an analog National Television System Committee (NTSC) video signal generated by a video camera and data acquired by a microcontroller and display them in real-time on a digital panel. An 8051 microcontroller is used to acquire power dissipation by the display panel, room temperature, and camera zoom level. The paper describes the major hardware components and shows how they are interfaced into a functional prototype. Test data results are presented and discussed.

Bachnak, Rafic↗

Imager displays free fall in stop action

Microprocessor-controlled imaging system displays sequence of "frozen" images of free-falling object, using video cameras positioned along fall. Strobe lights flash as object passes each camera's viewfield. Sequence stored on video disk and displayed on television monitor is stop-action record of fall dynamics. With modification, system monitiors other high speed phenomena.

Frazer, R. E.↗

Study of design and control of remote manipulators. Part 4: Experiments in video camera positioning with regard to remote manipulation

The results are presented of a study involving closed circuit television as the means of providing the necessary task-to-operator feedback for efficient performance of the remote manipulation system. Experiments were performed to determine the remote video configuration that will result in the best overall system. Two categories of tests were conducted which include: those which involved remote control position (rate) of just the video system, and those in which closed circuit TV was used along with manipulation of the objects themselves.

Mackro, J.↗