Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TECHNOLOGY ASSESSMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Spaceborne synthetic aperture radar: Current status and future directions. A report to the Committee on Earth Sciences, Space Studies Board, National Research Council

This report provides a context in which questions put forth by NASA's Office of Mission to Planet Earth (OMPTE) regarding the next steps in spaceborne synthetic aperture radar (SAR) science and technology can be addressed. It summarizes the state-of-the-art in theory, experimental design, technology, data analysis, and utilization of SAR data for studies of the Earth, and describes potential new applications. The report is divided into five science chapters and a technology assessment. The chapters summarize the value of existing SAR data and currently planned SAR systems, and identify gaps in observational capabilities needing to be filled to address the scientific questions. Cases where SAR provides complementary data to other (non-SAR) measurement techniques are also described. The chapter on technology assessment outlines SAR technology development which is critical not only to NASA's providing societally relevant geophysical parameters but to maintaining competitiveness in SAR technology, and promoting economic development.

Evans, D. L.↗

Demonstration of Micro-Combined Heat and Power for Light Commercial Applications (Final Report)

In 2014 the United States Department of Energy (DOE) Building Technologies Office (BTO) funded a technology assessment of micro Combined Heat and Power (µCHP) systems for light commercial applications. The technology assessment was part of the BTO High Impact Technology (HIT) Catalyst program. The HIT Catalyst program supports research and development into technologies that will yield cost-effective, efficient buildings. It is estimated µCHP in US has the potential to save 10.5 GW of primary energy in the commercial building sector.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

HTGR Technology Family Assessment for a Range of Fuel Cycle Missions

This report examines how the HTGR technology family can provide options for the once through, modified open cycle (MOC), or full recycle fuel cycle strategies. The HTGR can serve all the fuel cycle missions that an LWR can; both are thermal reactors. Additional analyses are warranted to determine if HTGR “full recycle” service could provide improved consumption of transuranic (TRU) material than LWRs (as expected), to analyze the unique proliferation resistance issues associated with the “pebble bed” approach, and to further test and analyze methods to separate TRISO-coated fuel particles from graphite and/or to separate used HTGR fuel meat from its TRISO coating. The feasibility of these two separation issues is not in doubt, but further R&D could clarify and reduce the cost and enable options not adequately explored at present. The analyses here and the now-demonstrated higher fuel burnup tests (after the illustrative designs studied here) should enable future MOC and full recycle HTGR concepts to more rapidly consume TRU, thereby offering waste management advantages. Interest in “limited separation” or “minimum fuel treatment” separation approaches motivates study of impurity-tolerant fuel fabrication. Several issues are outside the scope of this report, including the following: thorium fuel cycles, gas-cooled fast reactors, the reliability of TRISO-coated particles (billions in a reactor), and how soon any new reactor or fuel type could be licensed and then deployed and therefore impact fuel cycle performance measures.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Technology Needs Assessment of an Atmospheric Observation System for Multidisciplinary Air Quality/Meteorology Missions, Part 2

The technology advancements that will be necessary to implement the atmospheric observation systems are considered. Upper and lower atmospheric air quality and meteorological parameters necessary to support the air quality investigations were included. The technology needs were found predominantly in areas related to sensors and measurements of air quality and meteorological measurements.

Alvarado, U. R.↗

HTGR Technology Family Assessment for a Range of Fuel Cycle Missions

This report examines how the HTGR technology family can provide options for the once through, modified open cycle (MOC), or full recycle fuel cycle strategies. The HTGR can serve all the fuel cycle missions that an LWR can; both are thermal reactors. Additional analyses are warranted to determine if HTGR “full recycle” service could provide improved consumption of transuranic (TRU) material than LWRs (as expected), to analyze the unique proliferation resistance issues associated with the “pebble bed” approach, and to further test and analyze methods to separate TRISO-coated fuel particles from graphite and/or to separate used HTGR fuel meat from its TRISO coating. The feasibility of these two separation issues is not in doubt, but further R&D could clarify and reduce the cost and enable options not adequately explored at present. The analyses here and the now-demonstrated higher fuel burnup tests (after the illustrative designs studied here) should enable future MOC and full recycle HTGR concepts to more rapidly consume TRU, thereby offering waste management advantages. Interest in “limited separation” or “minimum fuel treatment” separation approaches motivates study of impurity-tolerant fuel fabrication.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Modeling the Energy Use of a Connected and Automated Transportation System (Poster)

Early research points to large potential impacts of connected and automated vehicles (CAVs) on transportation energy use - dramatic savings, increased use, or anything in between. Due to a lack of suitable data and integrated modeling tools to explore these complex future systems, analyses to date have relied on simple combinations of isolated effects. This poster proposes a framework for modeling the potential energy implications from increasing penetration of CAV technologies and for assessing technology and policy options to steer them toward favorable energy outcomes. Current CAV modeling challenges include estimating behavior change, understanding potential vehicle-to-vehicle interactions, and assessing traffic flow and vehicle use under different automation scenarios. To bridge these gaps and develop a picture of potential future automated systems, NREL is integrating existing modeling capabilities with additional tools and data inputs to create a more fully integrated CAV assessment toolkit.

30 DIRECT ENERGY CONVERSION↗

The law's interface with expanding technology

The role of the law in technology assessment is described in generalized terms of a legal system as it confronts expanding technology. The functions of a technology assessment are considered to be twofold; provide for legislative action designed to channel technological advance along lines which are regarded as optimal from the standpoint of society's interests; and encourage and promote legislative action which will deal decisively with the potential disruptions and injuries caused by technology at a much earlier stage of the growth of the technology than is feasible under the present legal system. It is concluded that since new law always has a disruptive effect on expectations and commitments arrived at under old law, it is generally desirable that new legislation should make the least possible change in the law consistant with accomplishing the desired objective.

Green, H. P.↗

Human Mars EDL Pathfinder Study: Assessment of Technology Development Gaps and Mitigations

This paper presents the results of a NASA initiated Agency-wide assessment to better characterize the risks and potential mitigation approaches associated with landing human class Entry, Descent, and Landing (EDL) systems on Mars. Due to the criticality and long-lead nature of advancing EDL techniques, it is necessary to determine an appropriate strategy to improve the capability to land large payloads. A key focus of this study was to understand the key EDL risks and with a focus on determining what "must" be tested at Mars. This process identified the various risks and potential risk mitigation strategies along with the key near term technology development efforts required and in what environment those technology demonstrations were best suited. The study identified key risks along with advantages to each entry technology. In addition, it was identified that provided the EDL concept of operations (con ops) minimized large scale transition events, there was no technology requirement for a Mars pre-cursor demonstration. Instead, NASA should take a direct path to a human-scale lander.

Lillard, Randolph↗

A review of separation processes proposed for advanced fuel cycles based on technology readiness level assessments

The results of an international review of separation processes for spent nuclear fuel (SNF) recycling in future closed fuel cycles are reported. This study was made by the Expert Group on Fuel Recycling Chemistry (EGFRC) organised by the Nuclear Energy Agency (NEA) of the Organisation for Economic Co-operation and Development (OECD). A unique feature of this study was that processes were classified according to a hierarchy of separations aimed at different elements within spent fuel (uranium; uranium-plutonium co-recovery; minor actinides; high heat generating radionuclides) and also the Head-end processes, used to prepare the SNF for chemical separation, were included. Separation processes covered both wet (hydrometallurgical) and dry (pyro-chemical) processes. A bespoke methodology suitable for assessing the technological maturities of separation processes for SNF recycling was then designed based on the well-established Technology Readiness Level (TRL) scale but adapted for spent nuclear fuel separations. The innovative feature of this was the use of a matrix approach that enabled information on both the scale of testing and materials used in testing to be combined in the evaluation of the TRL. TRLs for the Head-end, hydrometallurgical and pyrochemical processes that had been reviewed by the study have been evaluated. It is clear that, whilst more R&D is needed in most cases to raise TRLs, suitable options exist to enable the recovery of all actinide elements plus the HHRs by wet or dry processes, even up to the extraordinarily difficult isolation of americium alone. The technology readiness levels (TRL) for most processes fall in the ‘proof of principle’ range with TRLs between 4 and 6, although this is an evaluation at the system level and some gaps in the individual process steps may still exist that strictly would reduce the overall TRL. That is, flowsheets have been proposed for processes and tested with active materials under increasingly relevant conditions, through to initial hot tests with small quantities of SNF. The results of this work were shown to be comparable to a parallel European study that evaluated TRLs for minor actinide partitioning processes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Editorial: Towards the rapid and systematic assessment of vaccine technologies

The COVID-19 pandemic highlighted both the extraordinary potential of modern vaccinology and persistent challenges in how vaccine technologies are assessed. While vaccines can be developed and deployed at unprecedented speed, our ability to predict efficacy in a population is constrained by methodological difficulties, underreporting of negative results, and limited comparability across studies. This editorial introduces a Research Topic that brings together an interdisciplinary collection of experimental, computational, and theoretical contributions spanning multiple pathogens and vaccine platforms. Across these contributions, emerging themes emphasize the need for standardized immunogenicity metrics, transparent reporting including negative findings, and harmonized experimental protocols to support meaningful comparisons. This editorial highlights community practices and shared commitments – supported by researchers, funders, and journals – that could strengthen reproducibility, transparency, and cumulative learning in vaccine research.

59 BASIC BIOLOGICAL SCIENCES↗

Feasibility study of modern airships, phase 2. Volume 2: Airport feeder vehicle

The Airport Feeder vehicle is a VTOL, semi-buoyant ellipsoidal airship capable of transporting passengers or cargo to major CTOL hub terminals from suburban and downtown depots. Six tasks were reviewed: (1) vehicle design definition, (2) operational procedures analysis, (3) cost analysis, (4) comparison with alternate transportation modes, (5) mission/vehicle feasibility assessment, and (6) technology assessment.

Source record↗

Report of activities of the advanced coal extraction systems definition project, 1979 - 1980

During this period effort was devoted to: formulation of system performance goals in the areas of production cost, miner safety, miner health, environmental impact, and coal conservation, survey and in depth assessment of promising technology, and characterization of potential resource targets. Primary system performance goals are to achieve a return on incremental investment of 150% of the value required for a low risk capital improvement project and to reduce deaths and disability injuries per million man-hour by 50%. Although these performance goals were developed to be immediately applicable to the Central Appalachian coal resources, they were also designed to be readily adaptable to other coals by appending a geological description of the new resource. The work done on technology assessment was concerned with the performance of the slurry haulage system.

Lavin, M. L.↗

Advanced interdisciplinary technologies

The following topics are presented in view graph form: (1) breakthrough trust (space research and technology assessment); (2) bionics (technology derivatives from biological systems); (3) biodynamics (modeling of human biomechanical performance based on anatomical data); and (4) tethered atmospheric research probes.

Anderson, John L.↗

Space Technology for the New Century

The National Aeronautics and Space Administration (NASA) is responsible for developing advanced space technologies that will lower the cost and improve the performance of existing space activities and enable new ones. Although NASA has recently proved adept at incorporating modern technologies into its spacecraft, the agency currently supports relatively little work in long-term space technology development. To enable ambitious future space activities and to achieve its long-term goals, NASA needs to engage in space research and technology development (R&T) in critical areas for the long term. NASA requested that the National Research Council (NRC) examine the nation's space technology needs in the post-2000 time frame and identify high-risk, high-payoff technology that could improve the capabilities and reduce the costs fo NASA, other government, and commercial space programs. The NRC was also asked to suggest how NASA can work more effectively with industry and universities to develop these technologies. To accomplish these ends, the Committee on Advanced Space Technology, under the auspices of the Aeronautics and Space Engineering Board, undertook a systematic process of information gathering and technology assessment. Six key technologies that the committee believes NASA should support are presented.

Source record↗

Technology readiness assessment of advanced space engine integrated controls and health monitoring

An evaluation is given for an integrated control and health-monitoring (ICHM) system that is designed to be used with hydrogen-oxygen rocket engines. The minimum required ICHM functions, system elements, technology readiness, and system cost are assessed for a system which permits the operation of H-O engines that are space-based, reusable, and descent-throttleable. Only the advanced sensors and some engine-dependent software are not found to be ready for applications to laboratory demonstration. Other systems related to the minimum functions are more developed, bringing the total system readiness to the conceptual design stage. Based on the evaluation of the H-O ICHM, it is estimated that the minimum system requirements for demonstration on an engine system testbed will require an investment of 30-45 million dollars over 6 years.

Millis, Marc G.↗

Technology readiness assessment of advanced space engine integrated controls and health monitoring

An evaluation is given for an integrated control and health monitoring system (ICHM) system that is designed to be used with hydrogen-oxygen rocket engines. The minimum required ICHM functions, system elements, technology readiness, and system cost are assessed for a system which permits the operation of H-O engines that are space-based, reusable, and descent throttleable. Based on the evaluation of the H-O ICHM, it is estimated that the minimum system requirements for demonstration on an engine system testbed will require an investment of 30 to 45 million dollars over six years.

Millis, Marc G.↗

Technology Readiness Level Assessment Process as Applied to NASA Earth Science Missions

Technology assessments of fourteen science instruments were conducted within NASA using the NASA Technology Readiness Level (TRL) Metric. The instruments were part of three NASA Earth Science Decadal Survey missions in pre-formulation. The Earth Systematic Missions Program (ESMP) Systems Engineering Working Group (SEWG), composed of members of three NASA Centers, provided a newly modified electronic workbook to be completed, with instructions. Each instrument development team performed an internal assessment of its technology status, prepared an overview of its instrument, and completed the workbook with the results of its assessment. A team from the ESMP SEWG met with each instrument team and provided feedback. The instrument teams then reported through the Program Scientist for their respective missions to NASA's Earth Science Division (ESD) on technology readiness, taking the SEWG input into account. The instruments were found to have a range of TRL from 4 to 7. Lessons Learned are presented; however, due to the competition-sensitive nature of the assessments, the results for specific missions are not presented. The assessments were generally successful, and produced useful results for the agency. The SEWG team identified a number of potential improvements to the process. Particular focus was on ensuring traceability to guiding NASA documents, including the NASA Systems Engineering Handbook. The TRL Workbook has been substantially modified, and the revised workbook is described.

Systems Engineering↗

Atmosphere revitalization for manned spacecraft - An assessment of technology readiness

The level of proficiency attained by the most effective physical and chemical regenerative processes capable of providing a habitable atmospheric environment in a spacecraft is assessed. It is shown that both the Sabatier and Bosh reactions are in a mature stage of technological readiness and can effectively reduce the carbon dioxide in a spacecraft. An electrochemical method for concentrating CO2 from an air environment offers promise to approach low levels of pCO2 control. Technological advances in the fields of solid polymer electrolytes and oxygen evolution electrocatalysts have led to a water electrolysis system that can maintain efficient performance for several years. Nitrogen supply and control of the composition of the spacecraft atmosphere is effectively provided by the circulating electrolyte technique.

Samonski, F. H., Jr.↗