Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Structural Properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Structure-mechanical properties correlation in bulk LiPON glass produced by nitridation of metaphosphate melts

The glassy solid electrolyte Lithium phosphorous oxynitride (LiPON) has been widely researched in thin film solid state battery format due to its outstanding stability when cycled against lithium. In addition, recent reports show thin film LiPON having interesting mechanical behaviors, especially its ability to resist micro-scale cracking via densification and shear flow. Here, in the present study, we have produced bulk LiPON glasses with varying nitrogen contents by ammonolysis of LiPO 3 melts. The resulting compositions were determined to be LiPO 3-3z/2 N z , where 0 ≤ z ≤ 0.75, and the z value of 0.75 is among the highest ever reported for this series of LiPON glasses. The short-range order structures of the different resulting compositions were characterized by infrared, Raman, 31 P magic angle spinning nuclear magnetic resonance, and X-ray photoelectron spectroscopies. Instrumented nano-indentation was used to measure mechanical properties. It was observed that similar to previous studies, both trigonally coordinated (N t ) and doubly bonded (N d ) N co-exist in the glasses in about the same amounts for z ≤ 0.36, the limit of N content in most previous studies. For glasses with z > 0.36, it was found that the fraction of the N t increased significantly while the fraction of N d correspondingly decreased. The incorporation of nitrogen increased both the elastic modulus and hardness of the glass by approximately a factor of 1.5 when N/P ratio reaches 0.75. At the same time, an apparent embrittlement of the glass was observed due to nitridation, which was revealed by nanoindentation with an extra sharp nanoindenter tip.

25 ENERGY STORAGE↗
DOE OSTI2022

Altered properties and structures of root exudate polysaccharides in a root hairless mutant of barley

Root exudates and rhizosheaths of attached soil are important features of growing roots. To elucidate factors involved in rhizosheath formation, wild-type (WT) barley (Hordeum vulgare L. cv. Pallas) and a root hairless mutant, bald root barley (brb), were investigated with a combination of physiological, biochemical, and immunochemical assays. When grown in soil, WT barley roots bound ~5-fold more soil than brb per unit root length. High molecular weight (HMW) polysaccharide exudates of brb roots had less soil-binding capacity than those of WT root exudates. Carbohydrate and glycan monoclonal antibody analyses of HMW polysaccharide exudates indicated differing glycan profiles. Relative to WT plants, root exudates of brb had reduced signals for arabinogalactan-protein (AGP), extensin, and heteroxylan epitopes. In contrast, the root exudate of 2-week-old brb plants contained ~25-fold more detectable xyloglucan epitope relative to WT. Root system immunoprints confirmed the higher levels of release of the xyloglucan epitope from brb root apices and root axes relative to WT. Epitope detection with anion-exchange chromatography indicated that the increased detection of xyloglucan in brb exudates was due to enhanced abundance of a neutral polymer. Conversely, brb root exudates contained decreased amounts of an acidic polymer, with soil-binding properties, containing the xyloglucan epitope and glycoprotein and heteroxylan epitopes relative to WT. We, therefore, propose that, in addition to physically structuring soil particles, root hairs facilitate rhizosheath formation by releasing a soil-binding polysaccharide complex.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Experimental Assessment of Elastic Modulus vs. Relative Density for Stretch- and Bend-Dominated Lattices

This project was designed to study the possibility of using structural properties of lattices to replicate the material properties of certain hard to manufacture designs and use topology optimization to determine the lattice type and density required to mimic these properties. The integration of additively manufactured lattice structures with topology optimization highlights the need for well characterized mechanical properties and uncertainty analyses to insure these optimized structures respond as predicted. Stereolithographically printed octet and rhombic dodecahedron lattices were manufactured at 10%, 25% and 65% density by volume. As a separate task, yet integrated into this work, finite element analysis (FEA) was used to predict the printed lattice’s mechanical properties, which were then compared to our experimental results. After comparing FEA and experimentallymeasured elastic moduli, it was determined that the FEA provides highly reliable predictions for the modulus of these printed lattice structures. These lattices also exhibited greater tensile stiffness than that of the solid material demonstrating the flexibility that lattices provide to designing parts with designer structural properties. The accurate printing and reliable modeling of these lattices will enable topology optimization of complex parts from well-characterized rhombic dodecahedron and octet lattice structures of varying densities.

36 MATERIALS SCIENCE↗
DOE OSTI2025

The structure of high-Mg alkali-bearing aluminosilicate glasses investigated in situ at ambient and high pressure by multi-angle energy dispersive X-ray diffraction and infrared microspectroscopy

The structural properties of synthetic high-Mg alkali-bearing aluminosilicate glasses analogues of natural picritic-to-komatiitic magmas were investigated in situ by multiangle energy dispersive X-ray diffraction at 2.1 GPa and ambient pressure and by Fourier Transform infrared spectroscopy up to 5.4 GPa in a cycle of compression and decompression experiments. Our results show that the intermediate range ordering of the glass structure at 2.1 GPa is 3.14 Å, increasing to 3.19 Å when decompressed. The local structure shows T-O lengths of 1.66 Å (2.1 GPa) and 1.65 Å (ambient pressure), T-T distances of 3.19 Å at high pressure, which lengthen to 3.21 Å at ambient pressure, causing the T-O-T angle of 147° determined at 2.1 GPa to widen to 154° upon decompression. The deconvoluted infrared spectra result in the presence of Q 1 , Q 2 , Q 3 populations in the aluminosilicate spectral region, whose proportions remain relatively unchanged up to 5.4 GPa. The structural response of the investigated glasses to cold-compression does not involve changes in polymerization, but rather a shrinking and compaction of the structure as evidenced by the Qn species shifting to higher wavenumbers as a function of pressure. The structural properties determined from X-ray diffraction for this glass composition are discussed together with those of glasses emerging from previous studies to highlight a compositional dependence mainly dictated by the amount of SiO 2 and Al 2 O 3 .

glass structure↗
DOE OSTI2021

A General Strategy for Batch Development of High-Performance and Cost-Effective Sodium Layered Cathodes

High-performance and low-cost transition metal (TM) layered oxides using earth abundant elements are promising cathodes for Na-ion batteries. However, it is challenging to obtain desired materials because the large Na size, different Na occupations and various layer stacking sequences multiply the complication in determining the structure of a given composition and exacerbate uncertainty to the structure-property correlation. In this work, we use the attainment of desired NaxMnyNiZTM1-y-zO2-based cathode materials as an example to demonstrate a general roadmap for batch development of sodium layered cathodes towards practical applications. A synthesis phase diagram of NaxMnyNi1-yO2 was created for pre-screening and rational selection of the platform material of P2/O3-structured Na0.85Mn0.6Ni0.4O2. Cationic potential was leveraged in elemental substitution to further promote the material structural stability and electrochemical performance. Several cost-effective O3 and P2/O3 hybrid cathode materials have been obtained, all of which demonstrate excellent performance. In particular, the Na0.85Mn0.5Ni0.4Ti0.1O2 delivers a high specific capacity of ~130 mAh/g between 2-4 V and 91% retention after 500 cycles. The work discovers multiple materials as high-performance and cost-effective Na-ion battery cathodes and offers critical guidance to the rational design of future layered cathode materials.

Xiao, Biwei↗
DOE OSTI2020

Temperature trends and correlation between SQUID superparamagnetic relaxometry and dc-magnetization on model iron-oxide nanoparticles

Structural properties of iron-oxide nanoparticles deeply affect their magnetic performance in many applications such as with superparamagnetic relaxometry, when employed as cell-targeted magnetic nanoparticles for in vivo diagnostics. In this work, we present a detailed characterization of model nanoparticles for this application, with an average size of ~25 nm and a narrow size dispersion (σ < 7%). Considering the intrinsic structural properties of these model nanoparticles, the study of temperature dependence and correlation between dc-magnetization and superconducting quantum interference detector-relaxometry are discussed based on known theoretical predictions and computer simulations of the magnetic dipole moment and characteristic decay constants. Furthermore, computer simulations provide support in clarifying how important the overall collective magnetization is affected by particle size dispersion, which has a direct role on sustaining the magnetic relaxation signal in the temperature range required in preclinical and clinical settings.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Experimentally informed structure optimization of amorphous TiO 2 films grown by atomic layer deposition

Amorphous titanium dioxide TiO 2 (a-TiO 2 ) has been widely studied, particularly as a protective coating layer on semiconductors to prevent corrosion and promote electron–hole conduction in photoelectrochemical reactions. The stability and longevity of a-TiO 2 is strongly affected by the thickness and structural heterogeneity, implying that understanding the structure properties of a-TiO 2 is crucial for improving the performance. This study characterized the structural and electronic properties of a-TiO 2 thin films (~17 nm) grown on Si by atomic layer deposition (ALD). Fluctuation spectra V(k) and angular correlation functions were determined with 4-dimensional scanning transmission electron microscopy (4D-STEM), which revealed the distinctive medium-range ordering in the a-TiO 2 film. A realistic atomic model of a-TiO 2 was established guided by the medium-range ordering and the previously reported short-range ordering of a-TiO 2 film, as well as the interatomic potential. The structure was optimized by the StructOpt code using a genetic algorithm that simultaneously minimizes energy and maximizes the match to experimental short- and medium-range ordering. The StructOpt a-TiO 2 model presents improved agreements with the medium-range ordering and the k-space location of the dominant 2-fold angular correlations compared with a traditional melt-quenched model. The electronic structure of the StructOpt a-TiO 2 model was studied by ab initio calculations and compared to the crystalline phases and experimental results. Finally, this work uncovered the medium-range ordering in a-TiO 2 thin films and provided a realistic a-TiO 2 structure model for further investigation of structure–property relationships and materials design. In addition, the improved multi-objective optimization package StructOpt was provided for structure determination of complex materials guided by experiments and simulations.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Unexpected Hydroxide Ion Structure and Properties at Low Hydration

Understanding the behavior of hydroxide ions in aqueous and non-aqueous media is fundamental to many chemical, biological, and electrochemical processes. Research has primarily focused on a single fully solvated hydroxide ion, either as an isolated cluster or in bulk. This work presents the first computational study to consider hydroxide under low hydration levels in detail, where the anion may not be fully solvated. Under such conditions, we find that the anions are predominantly present as unique water-bridged hydroxide pair complexes, distinct from previously reported structures under fully hydrated conditions. Although similar hydroxide pair structures were previously reported, we analyze these structures for the first time in the disordered liquid state where they are found to be unusually stable in the presence of bulky quaternary ammonium cations. Our findings help explain the unusual diffusion behavior as well as the higher reactivity of hydroxide anions observed under low hydration conditions.

computational studies↗
DOE OSTI2022

Structure and properties of the Sr 2 In 1-x Sn x SbO 6 double perovskite

A series of n -type oxide double perovskite semiconductors, Sr 2 In 1-x Sn x SbO 6 (0 ≤ x ≤ 0.3) has been synthesized; Sn 4+ partially substitutes for In 3+ . 121 Sb and 119 Sn Mössbauer spectroscopy are employed to investigate the B-site cation ordering because this issue cannot be resolved by conventional diffraction techniques alone. Rigid ordering between In 3+ /Sn 4+ and Sb 5+ sites is revealed by the spectroscopic method, and hence in combination with the structural parameters extracted from the XRD structural refinements, the crystallographic structure of this series of compounds is depicted. Furthermore, the temperature dependent magnetic susceptibilities, band gaps, and carrier type are characterized, and the calculated band structure is presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Integrated electro- and chemical characterization of sulfide-based solid-state electrolytes

Sulfide solid-state electrolytes (SSEs) represent a critical advancement towards enabling next-generation lithium metal batteries. However, a profound knowledge gap remains in understanding the structure–property relationships inherent to these sulfide SSEs. Electrochemical assessment and spectroscopic tools, such as Raman spectroscopy, offer bench-top ready, non-invasive, powerful avenues for operando and in situ analyses. Despite this potential, the integration of these methodologies, particularly for real-time interrogation, is markedly under-investigated. This review endeavors to catalog the use of diverse electrochemical techniques and spectroscopic tools in elucidating the structural and functional nuances of sulfide SSEs. Through the harmonization of these multifaceted evaluation strategies, our objective is to chart a course towards optimized sulfide SSEs, thereby aiding in the development of informed protocols for a deeper comprehension and understanding of the structure–property relationship and interfacial engineered design of solid-state batteries using sulfide-based SSEs.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Influence of Oxygen Flow and Stoichiometry on Optical Properties and Damage Resistance of Hafnium Oxide Thin Films

Hafnium oxide (HfO 2 ) is predominantly used as a high-index material in multi-layer dielectric coatings for high-peak- and high-average-power lasers, but laser damage often initiates within the HfO 2 layers despite their wide bandgap. Oxygen deficiency during deposition can introduce vacancy-related sub-bandgap states and absorptive defects, lowering damage resistance. This study investigates how oxygen flow during HfO 2 deposition with ion beam sputtering (IBS) affects its stoichiometry, defect formation, and nanosecond laser-induced damage threshold (LIDT) and whether single-layer trends predict multilayer performance. Single layers were deposited at varying oxygen flows, characterized for optical and structural properties, and tested for the LIDT at 1064 nm and 355 nm. Increasing oxygen flow drove the layer toward near-stoichiometric HfO 2 , reduced the refractive index, and altered the density of surface pinhole-like features. The single-layer LIDT at 355 nm increased with oxygen, whereas the 1064 nm LIDT was comparatively less sensitive to oxygen flow, consistent with the wavelength-dependent roles of absorptive precursors and microstructural defects. In contrast, a HfO 2 -based high-reflector (HR) showed a higher LIDT at lower oxygen flow, indicating that the family of damage precursors changes between single layers and multilayers; in stacks, structural properties such as stress, gas entrapment and thermal dissipation may outweigh the isolated absorptive defects found in single layers. These results demonstrate that the optimal oxygen flow condition depends on both LIDT wavelength and film architecture. We identified, for single layers, a 15–35 sccm window for maximizing the 1064 nm LIDT and a high-flow optimum (45 sccm) for the 355 nm LIDT and, for 355 nm HR stacks, a distinct lower-flow regime (~10 sccm).

Optics and optical instruments↗
DOE OSTI2023

Organo‐Functionalized Lacunary Double Cubane‐Type Oxometallates: Synthesis, Structure, and Properties of [(M II Cl) 2 (V IV O) 2 {((HOCH 2 CH 2 )(H)N(CH 2 CH 2 O))(HN(CH 2 CH 2 O) 2 )} 2 ] (M=Co, Zn)

Abstract Organofunctionalized tetranuclear clusters [(M II Cl) 2 (V IV O) 2 {((HOCH 2 CH 2 )(H)N(CH 2 CH 2 O))(HN(CH 2 CH 2 O) 2 )} 2 ] (1, M=Co,2: M=Zn) containing an unprecedented oxometallacyclic {M 2 V 2 Cl 2 N 4 O 8 } (M=Co, Zn) framework have been prepared by solvothermal reactions. The new oxo‐alkoxide compounds were fully characterized by spectroscopic methods, magnetic susceptibility measurement, DFT and ab initio computational methods, and complete single‐crystal X‐ray diffraction structure analysis. The isostructural clusters are formed of edge‐sharing octahedral {VO 5 N} and trigonal bipyramidal {MO 3 NCl} units. Diethanolamine ligates the bimetallic lacunary double cubane core of1and2in an unusual two‐mode fashion, unobserved previously. In the crystalline state, the clusters of1and2are joined by hydrogen bonds to form a three‐dimensional network structure. Magnetic susceptibility data indicate weakly antiferromagnetic interactions between the vanadium centers [J iso (V IV −V IV )=−5.4(1); −3.9(2) cm −1 ], and inequivalent antiferromagnetic interactions between the cobalt and vanadium centers [J iso (V IV −Co II )=−12.6 and −7.5 cm −1 ] contained in1.

Chemistry↗
DOE OSTI2025

Micromechanical Surrogate Machine Learning Model for Creep Deformation Modeling

Process variability during the manufacture of gas turbine engine hot section components can significantly affect the material’s resulting microstructure. In casting, for instance, geometric variation within a component (thin sections versus thick sections, radial location) influences cooling rates and the resulting grain size. The high temperature creep response is known to be sensitive to grain size owing to a diffusional creep mechanism which occurs more readily along grain boundaries. Microstructural variation correspondingly drives mechanical behavior which propagates into component scale performance uncertainty. These factors are essential when planning inspection, maintenance, and repair strategies within a reliability framework. These benefits provide opportunities to increase overall energy efficiency through refined margins. Critically, there is an opportunity to bolster existing data-driven reliability models using physics-driven process-structure-property relations. Here we present recent work establishing a framework for evaluating the probabilistic creep performance of high-temperature materials. A novel microstructure-sensitive crystal plasticity finite element model is established that captures both grain boundary and crystallographic deformation effects. The computationally expensive physics model is calibrated using a statistical approach and this high-fidelity model is subsequently used to train a computationally efficient machine learning surrogate model. The surrogate model is essential for sampling a large ensemble of simulated structure-property pair results. The ensemble data are then mined to extract salient trends to be incorporated into a microstructure-sensitive reliability model. The proposed approach represents a novel way to capture microstructure-sensitive trends from physics-based models within a modern reliability framework.

Fernandez-Zelaia, Patxi [ORNL]↗
DOE OSTI2021

Comparison of water nanodroplet properties on different graphite-based substrates

The molecular structure and dynamics of water differ considerably at various interfaces. We compare the interfacial water structure–property relationship on three different carbon substrates, namely, amorphous carbon, compressed expanded natural graphite, and pure graphite by utilizing atomistic molecular dynamics simulations. The effect of different substrates on the structural and dynamical properties of water can readily be observed. Here, the density distributions parallel and normal to the substrates show oblate droplet structures. The normal to the substrate water distribution shows a strong hydration layer at the interface that does not vary with substrates. However, the disparity in the structure and dynamics on three different substrates shows that the surface morphologies of the substrates are critical for determining nanoscale water properties. Furthermore, it is observed that the formation of an interfacial water layer or the hydration layer is a direct consequence of both water “confinement” at the nanoscale and “attraction” between water molecules and the carbon substrates.

42 ENGINEERING↗
DOE OSTI2024

Machine Learning for Joint Quality Control

The use of lightweight material combinations has been highly demanded in manufacturing automotive structures. However, making robust dissimilar material joints of such lightweight materials is still challenging. A significant barrier to achieving high-quality and repeatable joint performance is a deficient understanding of the relationship between the welding process, joint attributes, and joint performance. In this context, welding factors refer to material, equipment, environment, and process parameters, while joint features comprise specific microstructural attributes of the weld such as nugget size, heat affected zone (HAZ) topology, intermetallic layer thickness, and sheet thickness reduction. Joint performance is quantified in terms of strength (e.g., tensile shear, coach peel, cross-tension), weld size, and hardness, among other factors. While there have been many attempts to establish this process-structure-property relationship by developing a model derived from the associated physics and first principles, the complexity of the joining processes compounded by the complex interactions with different materials in an automotive assembly line environment, has hindered the usefulness of such attempts. The complexity is further exacerbated using different stacking materials, especially comprising dissimilar material combinations. In practice, the common approach has been the laborious process of creating welds, characterizing them, and then physically testing them through experimentation. With the emergence of artificial intelligence (AI) methods, an alternative pathway to eliciting the desired process-structure-property relationship at an accelerated pace is to use a data-driven approach by employing machine-learning (ML) techniques. This approach is benefitted by the availability of large streams of data, generated through years of research and testing by original equipment manufacturers, in the form of material, process, environmental, equipment, microstructural, and bulk-scale performance information from multimodal, multiscale sensors making measurements from laboratory-scale to production-scale processes. During Phase I efforts, which ended in fiscal year (FY) 2021, the Oak Ridge National Laboratory and Pacific Northwest National Laboratory (ORNL/PNNL) team demonstrated the effectiveness of different ML/AI frameworks in modeling complex relationships between resistance spot welding (RSW) process parameters, weld attributes, and joint properties using a subset of data from General Motors (GM). In FY 2022, the project team further refined and expanded their respective ML models to analyze additional welds with new weld stack-ups and materials to enhance the ML model predictive capability. ORNL extended its unified deep neural networks (DNN) ML training and prediction framework with new data streams of process parameters, and PNNL extended its model describing RSW process parameters’ associations with weld attributes. In FY 2023, the project team completed the development of the AI/ML architecture for analyzing aluminum/steel joints manufactured by GM via RSW and transitioned into the inline welding quality monitoring task for steel/steel RSW joints provided by GM.

36 MATERIALS SCIENCE↗
DOE OSTI2024

On the cogent formulation of an elastomeric silicone ink material for direct ink write ( DIW ) 3D printing

Abstract Adhesives and sealants show fine rheology with good physical and mechanical properties as viscous pastes, a possible starting point for developing direct ink writing (DIW) 3D printing ink. However, many commercial adhesives and sealants take days or weeks to cure fully. DIW 3D‐printed parts made directly from these sealants are not designed for a scalable manufacturing process and high‐volume production. Moreover, most of these adhesives and sealants have volume shrinkage during cure. A systematic understanding of formulation methods and design principles for an elastomeric silicone DIW ink can overcome these issues. This study presents the cogent formulation development of a 3D printable thermoset elastomer silicone that gels and cures isotropically in minutes, reducing cycle time for rapid ink development with no shrinkage during cure. More specifically, we outline the principles of raw material selection of a formulation to achieve excellent rheology, printability, synchronized working, and gel time fitting requirements closer to scalable manufacturing. The reaction kinetics and their corresponding 3D‐printed structural properties are also described. Interest in future work is toward a rational DIW 3D printing ink material development protocol and use of machine learning (ML). Highlights Formulation method flexibility and design principle of DIW ink. Raw material selection principle to achieve optimal rheology for DIW printing. Ink gel kinetics for large‐scale DIW manufacturing. Hydrosilylation conversion over time at different ambient temperatures. Structural properties of DIW 3D printed parts.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Molecular dynamics simulations for glass transition temperature predictions of polyhydroxyalkanoate biopolymers

Polyhydroxyalkanoates (PHAs) represent an emerging class of biosynthetic and biodegradable polyesters that exhibit considerable potential to replace petroleum-based plastics towards a sustainable future. Despite the promise, general structure–property mappings within this class of polymers remain largely unexplored. An efficient exploration of this vast chemical space calls for the development and validation of predictive methods for accurate estimation of a diverse range of properties for PHA-based polymers. Towards this aim, we present and validate in this work the results of our molecular dynamics (MD) simulation based approach aimed at predicting glass transition temperatures (T g ) of PHA-based polymers. Since generally available and widely used polymer forcefields exhibit a relatively poor performance for T g predictions, we have developed a new forcefield by modifying the polymer consistent force field (PCFF) via refining a selected set of torsion potentials of the polymer backbone using accurate density functional theory (DFT) computations. After carefully assessing the dependence of critical simulation parameters, such as, polymer chain length, number of polymer chains, supercell size, and thermal quenching rate used in the simulation, the applicability and transferability of the modified PCFF (mPCFF) is demonstrated by directly comparing the computed T g predictions of various polymers with different chemistries, polymer side chain lengths and functional groups forming the polymer side chains against the respective experimentally measured values. Furthermore, the transport properties such as self-diffusion coefficient and viscosity are computationally determined and their well-known correlation with the target properties is demonstrated. Lastly, we have employed the developed approach to predict T g values for a number of yet-to-be-synthesized PHA-based polymers with a diverse set of functional groups in the polymer side chains. The results are further rationalized by correlating the predicted T g values with the inter-chain H-bond formation tendencies of the different side chain functional groups. This work represents an important first step towards computationally guided design of PHA-based functional polymers and opens up new directions for a systematic investigation of composition- and configuration-dependent structure–property relationships in more complex binary and ternary copolymer systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Direct Study of Changes in Catalyst Structure-Kinetic Properties During Redox Transitions

The Temporal Analysis of Products (TAP) pulse response methodology is a transient technique that provides the time resolution needed to deconvolve reaction steps from the complex networks typical in industrial catalytic processes. Traditionally, TAP measurements observe gas phase dynamics at the reactor exit but lack direct measurements of changes in the catalyst itself. Recently, a new operando technique was developed that couples gas phase transients to dynamic changes in metal centers with the precise TAP methodology for nanomole titration. Using an industrial CrOx/Al2O3 catalyst used for propane dehydrogenation, we demonstrate the capabilities of this unique device to reveal key catalytic processes: 1) total propane oxidation not associated with chromia centers, 2) reduction of Cr6+ to Cr3+ correlated with selective product formation, and 3) subsequent carbon accumulation. By utilizing incremental pulsing in a diffusion-only transport regime, the spectrokinetic device allows us to resolve detailed changes in catalyst structure, composition, and kinetic function that are otherwise indistinguishable in conventional operando devices. The unification of the TAP methodology with time-resolved spectroscopic measurements offers new and unique insights into the complex kinetic phenomena regulated by solid catalyst surfaces.

03 - NATURAL GAS↗