Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Strong interactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Mn(II)-induced phase transformation of Mn(IV) oxide in seawater

Manganese (Mn) oxides are key components of oceanic and lacustrine Mn nodules and influence metal cycling through oxidation and adsorption processes. Layered Mn oxides (LMOs) are the most common minerals in these nodules and the immediate products of microbially mediated Mn(II) oxidation by O 2 . LMOs can transform into tunneled Mn oxides (TMOs), Mn oxyhydroxides (MnOOH), or Mn(II,III) phase (Mn 3 O 4 ). LMOs often concur with Mn(II) in the environment and the adsorption and oxidation of Mn(II) by LMOs can greatly promote the transformation of LMOs to those phases. However, the Mn(II)-promoted transformation of LMOs in seawater—rich in various cations (300 mM Na + , 10 mM K + , 50 mM Ca 2+ , and 10 mM Mg 2+ ) remains poorly understood. We examined the transformation of δ-MnO 2 in artificial seawater (pH 8.2) under anoxic conditions with the Mn(II)/MnO 2 ratio (r) ranging from 0.08 to 3.83. To assess the effect of ionic strength (IS), parallel experiments were conducted in a mixed 530 mM NaCl and 10 mM KCl solution (having seawater ionic strength but without Ca 2+ and Mg 2+ ) and in 100 mM NaCl solution as a control. At low r (0.08), δ-MnO 2 transformed into triclinic birnessite and a 4 × 4 TMO in 100 mM NaCl solution, which, however, was suppressed in seawater due to strong interactions of Ca 2+ /Mg 2+ with δ-MnO 2 . In the mixed 530 mM NaCl and 10 mM KCl solution (the same ionic strength as of seawater), the transformation occurred extensively but the products had lower crystallinity compared to in 100 mM NaCl solution. At the high Mn(II)/MnO 2 ratios (0.5 ≤ r ≤ 3.83), δ-MnO 2 transformed extensively into MnOOH phases and hausmannite (Mn 3 O 4 ) in 100 mM NaCl solution. The seawater suppressed the transformation, but the suppression became weaker with increasing Mn(II)/MnO 2 ratio. For example, the transformation was completely suppressed at r = 0.5 but essentially negligible at r = 3.83. The suppression at these high Mn(II)/MnO 2 ratios was mainly ascribed to the influence of Ca 2+ and Mg 2+ rather than of the high IS, and the weaker suppression at the higher Mn(II)/MnO 2 ratio suggests stronger competition of Mn(II) with Ca 2+ /Mg 2+ for interacting with δ-MnO 2 . Moreover, the composition and crystallinity of the transformation products (i.e., the relative abundance of MnOOH (α, β, and γ) and Mn 3 O 4 ) were influenced by both the high ionic strength and the presence of Ca 2+ and Mg 2+ . Therefore, even though Ca 2+ and Mg 2+ concentrations are much lower than Na + in seawater, their impacts on the transformation are dominant. Our study explains why MnOOH phases, hausmannite, and TMOs are less common than LMOs in oceanic environments, partially because seawater chemistry suppresses their formation. LMOs are the most reactive for metal adsorption and oxidation among all Mn oxides. Thus, the high stability of LMOs in an oceanic environment confers the high impacts of Mn oxides on metal cycling in the ocean.

Divalent manganese↗
DOE OSTI2020

Three-dimensional modeling and simulations of single-crystal and bi-crystal titanium for high-strain-rate loading conditions

High purity single crystal titanium (Ti) under shock wave loading is modeled under both one-dimensional and three-dimensional cylindrical conditions. Cylinder sizes of 10 μm and 20 μm radius are both considered in order to assess influence of boundary conditions. A thermodynamically consistent single crystal model for application to shock conditions is presented. The model accounts for the coupled non-linear elastic, dislocation slip, deformation twinning, and structural phase transformation response of the titanium material. Plate impact experiment results using a copper flyer are used to compare against the simulations for crystals oriented in [0001] and [10$\overline1$1] crystallographic directions. The one-dimensional and threedimensional simulations of the two differently oriented single crystals indicate differences between the one-dimensional and three-dimensional representation, especially for the [10$\overline1$1] oriented single crystal. This orientation breaks the relative orientation symmetry between the crystal and cylinder which otherwise exists for the [0001] oriented single crystal. A significant amount of heterogeneity in the field response of the[10$\overline1$1] oriented simulation was demonstrated due to the highly coupled nature of the deformation. A bi-crystal model composed of both the [0001] and [10$\overline1$1] orientations with the boundary between the two along the axis of the cylinder is also considered for a cylinder model size of 10 μm. The results indicate a strong interaction between the two grains that affects the ω phase volume fraction achieved relative to the single crystal calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Parametric Studies of Heat Pump Water Heater Using Low GWP Refrigerants

A storage heat pump water heater (HPWH) comprises a vapor compression system and a hot water tank. It can lead to more than 70% energy saving, compared with electric resistance heating. HPWH usually uses a wrapped-tank coil as the water heater. The wrapped coil has a strong interaction with the water tank and impose a new challenge for the engineering design and simulation study. Based on the US DOE/ORNL Heat Pump Design Model (HPDM), i.e., a public-domain, component-based thermal system modelling platform, a segment-to-segment wrapped-tank coil model coupled with a one-dimensional stratified water tank model were developed, which facilitates modeling and design HPWHs having various configurations and components. Additionally, the hardware-based design model was used to evaluate refrigerants having lower global warming potentials to replace R-134a, including R-1234yf, R-1234ze, R-290, R-513A and R-450A, when effects of compressor size, refrigerant charge on 24-hour uniform energy factor (UEF) and first-hour rating (FHR) were investigated.In the drop-in replacements, R-1234ze achieved the best UEF, and R-290 resulted in the lowest UEF. When downsizing the compressor to maximize the UEFs, the UEFs of R-134a, R-290, R1234yf, R-450A and R-513A ascended to the range of 4.4 to 4.53, with R-513A having the highest UEF. The R-1234ze ended up having the lowest UEF of 4.27. Refrigerants having larger volumetric vaporization heat led to higher FHRs if using the fixed-size compressor, that R-290 resulted in the highest FHR.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Transition metal carbides and nitrides as catalysts for thermochemical reactions

Transition metal carbides and nitrides (TMCs and TMNs) have attracted much attention due to their unique physical and chemical properties brought by the incorporation of interstitial carbon and nitrogen into the crystal lattice of the parent metals. Recent advances in utilizing TMCs and TMNs have revealed their intriguing catalytic properties in many industrially important reactions, including heteroatom removal, CO 2 activation, alcohol reforming, and water–gas shift reactions. The promising activity, selectivity, and stability of TMCs and TMNs, either as catalysts or as supports for other metals, are often attributed to their strong interactions with the adsorbates, tunable surface properties, as well as the synergy with supported metals. This review summarizes the synthesis and characterization of TMC and TMN model surfaces and powder catalysts, and uses several case studies to demonstrate their unique catalytic properties in these important reactions. Finally, a discussion is also provided regarding the challenges and opportunities associated with the utilization of TMCs and TMNs in thermocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Modulating Cu electrode microenvironments with MOF coatings: insights from molecular dynamics and electrochemical experiments of CO reduction

Metal-organic frameworks (MOFs) present a compelling strategy for tuning electrochemical interfaces by reshaping interfacial solvent structure. In this study, we examine how MOF coatings influence the microenvironment at copper electrodes during the CO electroreduction reaction (CORR) using a combined approach of molecular dynamics (MD) simulations and electrochemical experiments. Two MOFs, NU-901 and ZIF-8, are selected to explore the impact of pore size and channel hydrophobicity on electrochemical activity and interfacial concentration in acetonitrile (ACN) and dimethyl sulfoxide (DMSO) electrolytes. Electrochemical measurements reveal that MOF@Cu electrodes exhibit lower Faradaic efficiencies for CO hydrogenation products (ethylene and methane) compared to bare copper but have dramatic impacts on the interfacial microenvironment. NU-901, with its larger pores and strong interactions with DMSO, traps DMSO molecules and enhances CO coordination in DMSO but suppresses CORR selectivity in favor of the hydrogen evolution reaction (HER). ZIF-8, with smaller pores and hydrophobic channels, limits the interfacial water concentration, and, in ACN, promotes CO coordination. The simulations provide insights into how MOFs can act as physical modulators of reactant delivery and interfacial structure to control electrochemical microenvironments. This work highlights the value of molecular dynamics in uncovering how structural features of MOFs influence interfacial phenomena, even when catalytic performance is not directly improved.

Copper electrode microenvironments↗
DOE OSTI2025

Electrochemical recovery of Gd into liquid Bi in molten LiCl-KCl-GdCl 3

The electrochemical recovery of Gd into liquid Bi electrodes was investigated in molten LiCl-KCl-GdCl 3 electrolyte at 773–973 K using constant currents of 10–150 mA cm −2 . High round-trip coulombic efficiency (>97 %) was demonstrated for deposition and removal of Gd into and from liquid Bi at all temperatures, confirming chemically reversible electrode reactions towards high recovery yield of Gd using liquid Bi. Furthermore, the overpotential associated with deposition of Gd into the liquid Bi electrode gradually increased with current density and decreased with temperature. At the lowest temperature of 773 K, a steep increase in overpotential was evident at high current densities due to slower mass transport and low solubility of Gd in liquid Bi (0.5 at.% Gd). Based on the impedance spectra of Bi electrodes at 773–973 K, the exchange current density was estimated to be 110–220 mA cm −2 , indicating facile charge transfer at the liquid electrode-electrolyte interface. Post-mortem characterization of Bi cathodes after electrolysis at 873 K indicated the formation of a solid GdBi(s) compound layer at the Bi electrode surface. Chemical analysis of Bi cathodes at various deposited Gd compositions resulted in Faradaic efficiencies of ∼75–84 %, promising a high recovery yield of Gd from molten salts using a strongly-interacting liquid Bi electrode.

36 - MATERIALS SCIENCE↗
DOE OSTI2021

Electron diffraction radial distribution function analysis of amorphous boron carbide synthesized by ion beam irradiation and chemical vapor deposition

Amorphous boron carbide (a-BxC) networks consist of light elements, and their low atomic scattering factors makes structural analysis by x-ray diffraction difficult. Electron diffraction has an advantage of detecting the light elements, because of the strong interaction between the matter and electrons. In this work, we prepared a-BxC by ion beam technologies and plasma-enhanced chemical vapor deposition, and characterized their structures via atomic pair-distribution functions derived from electron diffraction intensity profiles. It was found that a pentagonal pyramid is the most favorable cluster in a-B4C generated by ion irradiation, while C—C homonuclear bonds were formed in the deposited a-B x C thin film. X-ray photoemission spectroscopy revealed that the a-BxC thin film possesses more carbon than B 4 C, which is responsible for the formation of the homonuclear bonds.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Substituent size versus metal binding of inhibitors with variants of influenza endonuclease

The influenza virus causes a significant burden of illness each year. Although vaccination is the most effective method to prevent seasonal influenza infection, viral escape mechanisms make vaccine composition difficult to predict. Antivirals are crucial for decreasing rates of morbidity and mortality from influenza viral infection. The newest anti-influenza drugs target the RNA-dependent RNA polymerase acidic N-terminal (PA N ) endonuclease, a critical component of influenza viral replication machinery. This study examines the structure of inhibitors of PAN that utilize a hydroxypyridinone-based metal-binding pharmacophore (MBP). Specifically, this report explores how the size of substituent groups impacts the binding conformation and affinity of a series of compounds against both wild-type (WT) and resistance mutant strains, I38T and E23K. Co-crystal structures revealed that the distance between compounds and enzyme residue 38 was conserved to maintain strong interactions, resulting in deviations from ideal coordination geometries at the active site metal centers. This suggests the interactions with residue 38 with each compound is important and can impact inhibitor potency as a consequence of distortions in the metal binding geometry of the compounds.

Endonuclease↗
DOE OSTI2021

Thermodynamics and kinetics of 2D g-GeC monolayer as an anode materials for Li/Na-ion batteries

Development of high capacity anode materials is one of the essential strategies for next-generation high-performance Li/Na-ion batteries. Rational design, using density functional theory, can expedite the discovery of these anode materials. Here, we propose a new anode material, germanium carbide, g-GeC, for Li/Na-ion batteries. Our results show that g-GeC possesses both benefits of the high stability of graphene and the strong interaction between Li/Na and germanene. The single-layer germanium carbide, g-GeC, can be lithiated/sodiated on both sides yielding Li 2 GeC and Na 2 GeC with a storage capacity as high as 633 mA h/g. Besides germagraphene’s 2D honeycomb structure, fast charge transfer, and high (Li/Na)-ion diffusion and negligible volume change further enhance the anode performance. These findings provide valuable insights into the electronic characteristics of newly predicted 2D g-GeC nanomaterial as a promising anode for (Li/Na)-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

PBI nanofiber mat-reinforced anion exchange membranes with covalently linked interfaces for use in water electrolysers

Anion exchange membranes (AEM) are key components in anion exchange membrane water electrolysers. Recently developed materials are less susceptible to the alkaline degradation of the polymer backbone and quaternary ammonium groups. A remaining challenge is the mechanical stability in contact with hot water and dimensional stability when the temperature of the feed solution changes. One solution is to reinforce membranes with a porous support. Since support materials like PEEK or PTFE have a different swelling behavior than the matrix and no strong interactions with the matrix, voids can form, and gas crossover increases. In this work, we approach this issue by pore filling polybenzimidazole nanofiber mats with the bromomethylated precursor of mTPN, an ultra-stable AEM material. During drying, a covalent interaction between support (PBI amine groups) and matrix (-CH 2 Br) is established. After quaternization, the optimized PBI/mTPN-50.120 composite membrane still shows a high conductivity of 62 mS cm –1 , but 37% reduced length swelling in comparison to the non-reinforced membrane. Tensile strength and Young's modulus increase 17% and 56% to 49 MPa and 680 MPa, respectively. In an electrolyser, a stable voltage of 1.98V at 0.25 A cm –2 was achieved, and no change in membrane resistance was observed over the test time of 200 h (50°C, 1 M KOH, catalysts based on Ni/Fe and Mo).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Evidence for top quark production in nucleus-nucleus collisions

We report droplets of quark-gluon plasma (QGP), an exotic state of strongly interacting quantum chromodynamics (QCD) matter, are routinely produced in heavy nuclei high-energy collisions. Although the experimental signatures marked a paradigm shift away from expectations of a weakly coupled QGP, a challenge remains as to how the locally deconfined state with a lifetime of a few fm can be resolved. The only colored particle that decays mostly within the QGP is the top quark. Here we demonstrate, for the first time, that top quark decay products are identified, irrespective of whether interacting with the medium (bottom quarks) or not (leptonically decaying W bosons). Using 1.7±0.1 nb -1 of lead-lead (A = 208) collision data recorded by the CMS experiment at a nucleon-nucleon center-of-mass energy of 5.02 TeV, we report evidence of top quark pair ($t\bar{t}$) production. Dilepton final states are selected, and the cross section ($σ_{t\bar{t}}$) is measured from a likelihood fit to a multivariate discriminator using lepton kinematic variables. The $σ_{t\bar{t}}$ measurement is additionally performed considering the jets originating from the hadronization of bottom quarks, which improve the sensitivity to the $t\bar{t}$ signal process. After background subtraction and analysis corrections, the measured $σ_{t\bar{t}}$ is 2.56 ± 0.82(tot) and 2.02 ± 0.69(tot)μb in the two cases, respectively, consistent with predictions from perturbative QCD.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Electromagnetic & Weak Probes: Experimental Overview

Electromagnetic and electroweak probes are the most versatile probes in the study of heavy-ion collisions. Produced at every stage in the evolution of QCD matter, its messengers are practically inert to the strongly interacting medium they travel through. In this contribution, I will discuss a selection of new results from experiments at the LHC, RHIC, and SIS facilities, spanning almost four orders of magnitude in beam energy. Finally, I will conclude with a brief overview of the experimental landscape in the near future.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Quantifying heavy quark transport coefficients with an improved transport model

We report that the heavy-flavor transport coefficients contain important information on the strong interaction at finite temperatures. The extraction of these numbers from experimental data requires dynamical modeling of heavy-flavor transport that is coupled to realistic medium evolution. Furthermore, meaningful extractions necessitate both a faithful implementation of the physical inputs to be tested and the quantification of model uncertainty. For these purposes, we have developed a partonic transport model LIDO. It has an improved treatment of in-medium parton bremsstrahlung, which has been calibrated to theoretical calculations in a simple medium to reduce modeling uncertainty. Regarding the interaction between heavy quark and the medium, few-body perturbative scatterings are applied to large-momentum transfer (q) processes, while a diffusion equation models the dynamics of small-q processes. Such a separation restricts the explicit use of medium quasi-particles to large-q processes only. Another advantage is that deviations from the leading-order probe-medium coupling can be parametrized as an additional contribution to the diffusion constant. The heavy quark transport coefficients are then extracted with uncertainty estimation from a Bayesian analysis including both the RHIC and the LHC data. The results are found to be consistent with earlier extraction of the light-quark transport coefficients at high momentum and be comparable with lattice calculations of the heavy-flavor diffusion constant in the static limit at low momentum.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

William A. Bardeen: A life in physics and the legacy of the chiral anomaly

William Allan Bardeen (September 15, 1941 − November 18, 2025) was an American theoretical physicist who worked at the Fermi National Accelerator Laboratory. He is renowned for his foundational work on the chiral anomaly, the Adler-Bardeen theorem, the non-Abelian anomaly and gravitational anomalies. He was instrumental in the development of quantum chromodynamics and its applications, such as semileptonic decays and the Λ $\overline{MS}$ scheme frequently used in perturbative analysis of high energy processes involving strong interactions. Bardeen also played a major role in developing a theory of dynamical breaking of electroweak symmetry via top quark condensates, leading to one of the first composite Brout-Englert-Higgs boson models. His work on the chiral symmetry dynamics of heavy-light quark bound states correctly predicted abnormally long-lived resonances which are chiral symmetry partners of the ground state.

Hill, Christopher T. [Fermi National Accelerator L↗
DOE OSTI2022

Controlling extrapolations of nuclear properties with feature selection

Predictions of nuclear properties far from measured data are inherently inaccurate because of uncertainties in our knowledge of nuclear forces and in our treatment of quantum many-body effects in strongly-interacting systems. While the model bias can be directly calculated when experimental data is available, only an estimate can be made in the absence of such measurements. Current approaches to compute the estimated bias quickly lose predictive power when their input variables are taken far from the training region, resulting in uncontrolled uncertainties in applications such as nucleosynthesis simulations. In this letter, we present a novel technique to identify the input variables of machine learning algorithms that can provide robust estimates of model bias. Our process is based on selecting input variables, or features, based on their probability distribution functions across the entire nuclear chart. We illustrate our approach on the problem of quantifying the model bias in nuclear binding energies calculated with Density Functional Theory (DFT). We prove that building model biases with only Z and N as features leads to highly unreliable extrapolations. Conversely, we show that proper feature selection can systematically improve theoretical predictions without increasing uncertainties.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Measurement of the cross-sections of the electroweak and total production of a Zγ pair in association with two jets in pp collisions at s = 13 TeV with the ATLAS detector

This Letter presents the measurement of the fiducial and differential cross-sections of the electroweak production of a Zγ pair in association with two jets. The analysis uses 140 fb –1 of LHC proton–proton collision data taken at $\sqrt{s}$ = 13 TeV recorded by the ATLAS detector during the years 2015–2018. Events with a Z boson candidate decaying into either an e + e – or μ + μ – pair, a photon and two jets are selected. The electroweak component is extracted by requiring a large dijet invariant mass and by using the information about the centrality of the system and is measured with an observed and expected significance well above five standard deviations. The fiducial pp→Zγjj cross-section for the electroweak production is measured to be 3.6 ± 0.5 fb. The total fiducial cross-section that also includes contributions where the jets arise from strong interactions is measured to be $16.8_{–1.8}^{+2.0}$ fb. The results are consistent with the Standard Model predictions. Differential cross-sections are also measured using the same events and are compared with parton-shower Monte Carlo simulations. Good agreement is observed between data and predictions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Search for non-resonant production of semi-visible jets using Run 2 data in ATLAS

Semi-visible jets, with a significant contribution to the event's missing transverse momentum, can arise in strongly interacting dark sectors. This results in an event topology where one of the jets can be aligned with the direction of the missing transverse momentum. The first search for semi-visible jets produced via a t-channel mediator exchange is presented. The analysis uses proton-proton collisions with an integrated luminosity of 139 fb —1 and a centre-of-mass energy of 13 TeV, collected with the ATLAS detector during the Run 2 of the LHC. No excess over Standard Model predictions is observed. Assuming a coupling strength of unity between the mediator, a Standard Model quark and a dark quark, mediator masses up to 2.7 TeV are excluded at the 95% confidence level. Upper limits on the coupling strength are also derived.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Measurements of inclusive J/ψ production at midrapidity and forward rapidity in Pb–Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV

The measurements of the inclusive J/ψ yield at midrapidity (|y| < 0.9) and forward rapidity (2.5 < y < 4) in Pb–Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV with the ALICE detector at the LHC are reported. The inclusive J/ψ production yields and nuclear modification factors, R AA , are measured as a function of the collision centrality, J/ψ transverse momentum (p T ), and rapidity. The J/ψ average transverse momentum and squared transverse momentum ($\langle$p T $\rangle$ and $\langle$$p^{2}_{T}$$\rangle$) are evaluated as a function of the centrality at midrapidity. Compared to the previous ALICE publications, here the entire Pb–Pb collisions dataset collected during the LHC Run 2 is used, which improves the precision of the measurements and extends the p T coverage. The p T -integrated R AA shows a hint of an increasing trend towards unity from semicentral to central collisions at midrapidity, while it is flat at forward rapidity. The p T -differential R AA shows a strong suppression at high p T with less suppression at low p T where it reaches a larger value at midrapidity compared to forward rapidity. The ratio of the p T -integrated yields of J/ψ to those of D 0 mesons is reported for the first time for the central and semicentral event classes at midrapidity. Model calculations implementing charmonium production via the coalescence of charm quarks and antiquarks during the fireball evolution (transport models) or in a statistical approach with thermal weights are in good agreement with the data at low p T . At higher p T , the data are well described by transport models and a model based on energy loss in the strongly-interacting medium produced in nuclear collisions at the LHC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗