Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Stokes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

An investigation of several numerical procedures for time-asymptotic compressible Navier-Stokes solutions

The status of an investigation of four numerical techniques for the time-dependent compressible Navier-Stokes equations is presented. Results for free shear layer calculations in the Reynolds number range from 1000 to 81000 indicate that a sequential alternating-direction implicit (ADI) finite-difference procedure requires longer computing times to reach steady state than a low-storage hopscotch finite-difference procedure. A finite-element method with cubic approximating functions was found to require excessive computer storage and computation times. A fourth method, an alternating-direction cubic spline technique which is still being tested, is also described.

Rudy, D. H.↗
NASA NTRS1975

Numerical solution of the Navier-Stokes equations for arbitrary two-dimensional airfoils

A method for numerical solution of the Navier-Stokes equations for the flow about arbitrary airfoils or other bodies is presented. This method utilizes a numerically generated curvilinear coordinate system having a coordinate line coincident with the body contour. Streamlines, velocity profiles, and pressure and force coefficients for several airfoils and an arbitrary rock are given. Potential flow solutions are also presented. The procedure capable of treating multiple-element airfoils, and potential flow results are presented.

Thames, F. C.↗
NASA NTRS1975

Calculation of supersonic three-dimensional free-mixing flows using the parabolic-elliptic Navier-Stokes equations

A numerical method is presented which is valid for integration of the parabolic-elliptic Navier-Stokes equations. The solution procedure is applied to the three-dimensional supersonic flow of a jet issuing into a supersonic free stream. Difficulties associated with the imposition of free-stream boundary conditions are noted, and a coordinate transformation, which maps the point at infinity onto a finite value, is introduced to alleviate these difficulties. Results are presented for calculations of a square jet and varying-aspect-ratio rectangular jets. The solution behavior varies from axisymmetry for the square jet to nearly two-dimensional for the high-aspect-ratio rectangle, although the computation always calculates the flow as though it were truly three-dimensional.

Hirsh, R. S.↗
NASA NTRS1975

Finite element computation of a viscous compressible free shear flow governed by the time dependent Navier-Stokes equations

A finite element algorithm for solution of fluid flow problems characterized by the two-dimensional compressible Navier-Stokes equations was developed. The program is intended for viscous compressible high speed flow; hence, primitive variables are utilized. The physical solution was approximated by trial functions which at a fixed time are piecewise cubic on triangular elements. The Galerkin technique was employed to determine the finite-element model equations. A leapfrog time integration is used for marching asymptotically from initial to steady state, with iterated integrals evaluated by numerical quadratures. The nonsymmetric linear systems of equations governing time transition from step-to-step are solved using a rather economical block iterative triangular decomposition scheme. The concept was applied to the numerical computation of a free shear flow. Numerical results of the finite-element method are in excellent agreement with those obtained from a finite difference solution of the same problem.

Cooke, C. H.↗
NASA NTRS1976

A block iterative finite element algorithm for numerical solution of the steady-state, compressible Navier-Stokes equations

An iterative method for numerically solving the time independent Navier-Stokes equations for viscous compressible flows is presented. The method is based upon partial application of the Gauss-Seidel principle in block form to the systems of nonlinear algebraic equations which arise in construction of finite element (Galerkin) models approximating solutions of fluid dynamic problems. The C deg-cubic element on triangles is employed for function approximation. Computational results for a free shear flow at Re = 1,000 indicate significant achievement of economy in iterative convergence rate over finite element and finite difference models which employ the customary time dependent equations and asymptotic time marching procedure to steady solution. Numerical results are in excellent agreement with those obtained for the same test problem employing time marching finite element and finite difference solution techniques.

Cooke, C. H.↗
NASA NTRS1976

Time-asymptotic solutions of the Navier-Stokes equation for free shear flows using an alternating-direction implicit method

An uncoupled time asymptotic alternating direction implicit method for solving the Navier-Stokes equations was tested on two laminar parallel mixing flows. A constant total temperature was assumed in order to eliminate the need to solve the full energy equation; consequently, static temperature was evaluated by using algebraic relationship. For the mixing of two supersonic streams at a Reynolds number of 1,000, convergent solutions were obtained for a time step 5 times the maximum allowable size for an explicit method. The solution diverged for a time step 10 times the explicit limit. Improved convergence was obtained when upwind differencing was used for convective terms. Larger time steps were not possible with either upwind differencing or the diagonally dominant scheme. Artificial viscosity was added to the continuity equation in order to eliminate divergence for the mixing of a subsonic stream with a supersonic stream at a Reynolds number of 1,000.

Rudy, D. H.↗
NASA NTRS1975

Numerical solutions of the unsteady Navier-Stokes equations for arbitrary bodies using boundary-fitted curvilinear coordinates

A method of automatic body-fitted curvilinear coordinate generation is described and used to construct a finite-difference solution of the full incompressible time-dependent Navier-Stokes equations for the unsteady laminar viscous flow arbitrary two-dimensional airfoils or any other two-dimensional body. A method of controlling the spacing of the coordinate lines encircling the body is developed in order to treat high Reynolds number flows, since the coordinate lines must concentrate near the surface to a greater degree as the Reynolds number increases. Multiple airfoils and submerged hydrofoils are treated as illustrative examples. The solution shows good agreement with the Blasius boundary layer solution for the flow past a semi-infinite flat plate.

Thompson, J. F.↗
NASA NTRS1975

Perturbation solution of the Navier-Stokes equations and its relation to the Lighthill-Curle solution of aerodynamic sound

The aerodynamic sound described by the Lighthill-Curle solution is reexamined using a method of matched asymptotic expansions. The governing Navier-Stokes equations written in nondimensional form are expanded for a small Mach number. First- and second-order solutions for the pressure field are obtained, and the singular nature of the expansion at large distances is indicated. The nearfield pressure is governed by the Poisson equation, whereas the farfield equations describe a linear wave system in a dissipative medium. The pseudosound is related to the incompressible Reynolds stresses associated with a solenoidal velocity field, the velocity, the pressure perturbation, and their derivatives on the boundaries. A uniformly valid first-order solution for the pressure is obtained. It is shown that viscosity, thermal conductivity, and entropy in the flow do not contribute to the first-order noise generation, while the viscous stress contributes to noise only from some boundaries. The application of the proposed perturbation method to a subsonically moving surface and a hot jet is discussed.

Pan, Y. S.↗
NASA NTRS1976

Comparison of solutions to boundary-layer and Navier-Stokes equations for the case of mass removal from a turbulent boundary layer

Comparisons are made over a range of Mach numbers from 1.5 to 7.5 at a fixed Reynolds number for various amounts of mass removal (boundary-layer bleed). Results indicate that boundary-layer theory can be used for design purposes in the range of bleed rates required to eliminate separation in an isolated, strong, adverse pressure gradient. Only about 5% to 10% of the boundary-layer mass flow must be removed to prevent such separations. Direct comparisons of bleed rates required to eliminate separation predicted by boundary-layer and Navier-Stokes equations for an M = 3.5-engine inlet centerbody show comparable results.

Rose, W. C.↗
NASA NTRS1976

Solutions of the Navier-Stokes equations for vortex breakdown

A numerical investigation of vortex breakdown has been undertaken in an attempt to understand its properties, and the mechanisms responsible for it. Solutions of the full steady axisymmetric Navier-Stokes equations for breakdown in an unconfined viscous vortex have been obtained for core Reynolds numbers up to 200, for a two-parameter family of assumed upstream velocity distributions. Diffusion and convection of vorticity away from the vortex core, and the strong coupling between the circumferential and axial velocity fields in highly-swirling flows, are shown to lead to stagnation and reversal of the axial flow near the axis. The various theories of vortex breakdown are considered in light of the present numerical solutions.

Grabowski, W. J.↗
NASA NTRS1976

Numerical solution of supersonic three-dimensional free-mixing flows using the parabolic-elliptic Navier-Stokes equations

A numerical method is presented for solving the parabolic-elliptic Navier-Stokes equations. The solution procedure is applied to three-dimensional supersonic laminar jet flow issuing parallel with a supersonic free stream. A coordinate transformation is introduced which maps the boundaries at infinity into a finite computational domain in order to eliminate difficulties associated with the imposition of free-stream boundary conditions. Results are presented for an approximate circular jet, a square jet, varying aspect ratio rectangular jets, and interacting square jets. The solution behavior varies from axisymmetric to nearly two-dimensional in character. For cases where comparisons of the present results with those obtained from shear layer calculations could be made, agreement was good.

Hirsh, R. S.↗
NASA NTRS1977

Numerical solutions of Navier-Stokes equations for the structure of a trailing vortex

The structure and decay of a trailing vortex were analyzed during the numerical solutions of the full Navier-Stokes equations. Unsteady forms of the governing equations were recast in terms of circulation, vorticity, and stream function as dependent variables, and a second upwind finite difference scheme was used to integrate them with prescribed initial and boundary conditions. The boundary conditions at the outer edge and at the outflow section of the trailing vortex were considered. Different models of the flow were postulated, and solutions were obtained describing the development of the flow as integration proceeds in time. A parametric study was undertaken with a view to understanding the various phenomena that may possibly occur in the trailing vortex. Using the Hoffman and Joubert law of circulation at the inflow section, the results of this investigation were compared with experimental data for a Convair 990 wind model and a rectangular wing. With an exponentially decaying law of circulation at the inflow section and an adverse pressure gradient at the outer edge of the trailing vortex, solutions depict vortex bursting through the sudden expansion of the core and/or through the stagnation and consequent reversal of the flow on the axis. It was found that this bursting takes place at lower values of the swirl ratio as the Reynolds number increases.

Jain, A. C.↗
NASA NTRS1977

A numerical investigation of the finite element method in compressible primitive variable Navier-Stokes flow

The results of a comprehensive numerical investigation of the basic capabilities of the finite element method (FEM) for numerical solution of compressible flow problems governed by the two-dimensional and axis-symmetric Navier-Stokes equations in primitive variables are presented. The strong and weak points of the method as a tool for computational fluid dynamics are considered. The relation of the linear element finite element method to finite difference methods (FDM) is explored. The calculation of free shear layer and separated flows over aircraft boattail afterbodies with plume simulators indicate the strongest assets of the method are its capabilities for reliable and accurate calculation employing variable grids which readily approximate complex geometry and capably adapt to the presence of diverse regions of large solution gradients without the necessity of domain transformation.

Cook, C. H.↗
NASA NTRS1977

A high Reynolds number numerical solution of the Navier-Stokes equations in stream function-vorticity form

Problems encoutered in investigations of high Reynolds number, incompressible flow are reviewed. A numerical solution computer program was modified to solve the stream function-vorticity form of the Navier-Stokes equations. Using a body fitted coordinate system with a U-shaped outer boundary, a simulation of incompressible flow at a Reynolds number of one million and a body angle of attack of zero was achieved.

Bearden, J. H.↗
NASA NTRS1976

Derivation of the Navier-Stokes equation

The proposed approach to the derivation of the Navier-Stokes equation is thought to be more plausible and easier to understand than other derivations that can be found in works on fluid mechanics. The tensor character of the stress is central to the derivation. In particular, a linear relation between stress and strain rate is assumed only for the shear, rather than for the full stress tensor as is done in most other derivations. An assumption for the shear is naturally simpler and easier to verify experimentally. The use of tensor analysis is shown to greatly simplify the derivation.

Deissler, R. G.↗