Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Stacking faults”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Radiation induced nanovoid shrinkage in Cu at room temperature: An in situ study

Radiation induced void swelling is widely observed in a variety of metallic materials. Here, by using sputtering deposition technique, we have introduced faceted nanovoids into Cu films. In-situ Kr ion irradiation was subsequently performed at room temperature to investigate the evolution of nanovoids. Most nanovoids found to shrink gradually with increasing dose. Irradiation induced high-density vacancy clusters exist mostly in the formof stacking fault tetrahedrons. Phase fieldmodeling reveales that void shrinkage arises from biased absorption of interstitials. These findings provide insights to the physical mechanisms of radiation response of nanovoids in metallic materials.

36 MATERIALS SCIENCE↗

Effect of Microstructure Refinement on Hardness Homogeneity of Aluminum Alloy 1100 Processed by Accumulative Roll Bonding

This work examines the effect of grain refinement via accumulative roll bonding (ARB) on the homogeneity of microstructure and hardness through the thickness of commercially pure aluminum AA1100 sheets. The use of 7 cycles of ARB was shown to produce homogeneous ultrafine-grained microstructure, reducing the grain size to 0.46 and 1.03 µm in normal direction and rolling direction, respectively. Examination by electron backscattered diffraction indicates that continuous dynamic recrystallization was the main mechanism for the formation of submicron equiaxed grains bounded with high-angle grain boundaries (HAGBs). The fraction of HAGBs increased gradually reaching a maximum of 71.6% after 7 cycles. Through-thickness hardness measurements using Vickers and nanoindentation tests show an increase from 43.5 Hv (0.85 GPa) for as-received sample to 63 Hv (1.1 GPa) after 7 cycles. The heterogeneity in hardness through the thickness of the as-received material was shown to restrain the evolution of uniform hardness across the sheet thickness with increasing ARB cycles. Tensile tests showed that the tensile strength is increased to 250 MPa, which is about 2 times its initial value. Owing to the high stacking fault energy of AA1100, strong dynamic recovery occurred with increasing ARB strain which was balanced with the strain hardening property of the material. This resulted in plastic instability at small strains and thus early necking during the tensile test.

36 MATERIALS SCIENCE↗

Microstructures and Impact Wear Behavior of Al-Alloyed High-Mn Austenitic Cast Steel After Aging Treatment

The microstructural evolution and impact wear behavior of Al-alloyed ultra-high-Mn austenitic cast steel were investigated after different heat treatments, including quenching (Q) and quenching + aging (Q + A). Another ultra-high-Mn austenitic cast steel without Al was compared under the same experimental condition. After Q + A, Al addition contributed to the precipitation of κ-carbides which improves the yield strength and wear resistance of the austenite matrix. However, the mechanical properties and wear resistance of the Al-free steel were strongly deteriorated due to the precipitation of plate-like M{sub 3}C-type carbides, as well as the worn surface of the Al-free steel had the feature of micro-scratches. After Q + A (2 h), the Al-alloyed steel obtained optimal wear resistance and the main wear feature was strain fatigue. But, excessive aging time (4 h) would lead to a large fragile peeling from the worn surface and the wear resistance was decreased. Also, the worn subsurface microstructures with different heat treatments were observed by transmission electron microscopy (TEM). These results show that the deformation microstructures of the Al-free steel contained stacking faults, dislocation tangle and deformation twins. The deformation character of Al-alloyed steel is dominated by planar glide, and with increase in the aging time, planar dislocation substructures gradually evolved, relating to dislocation pileups, Taylor lattices and micro-bands.

36 MATERIALS SCIENCE↗

Improving optical performance of GaN nanowires grown by selective area growth homoepitaxy: Influence of substrate and nanowire dimensions

Series of GaN nanowires (NW) with controlled diameters (160–500 nm) and heights (420–1100 nm) were homoepitaxially grown on three different templates: GaN/Si(111), GaN/AlN/Si(111), and GaN/sapphire(0001). Transmission electron microscopy reveals a strong influence of the NW diameter on dislocation filtering effect, whereas photoluminescence measurements further relate this effect to the GaN NWs near-bandgap emission efficiency. Although the templates' quality has some effects on the GaN NWs optical and structural properties, the NW diameter reduction drives the dislocation filtering effect to the point where a poor GaN template quality becomes negligible. Thus, by a proper optimization of the homoepitaxial GaN NWs growth, the propagation of dislocations into the NWs can be greatly prevented, leading to an exceptional crystal quality and a total dominance of the near-bandgap emission over sub-bandgap, defect-related lines, such as basal stacking faults and so called unknown exciton (UX) emission. In addition, a correlation between the presence of polarity inversion domain boundaries and the UX emission lines around 3.45 eV is established.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

g-factor anisotropy in nanowire-based InAs quantum dots

The determination and control of the electron g-factor in semiconductor quantum dots (QDs) are fundamental prerequisites in modern concepts of spintronics and spin-based quantum computation. We study the dependence of the g-factor on the orientation of an external magnetic field in quantum dots (QDs) formed between two metallic contacts on stacking fault free InAs nanowires. We extract the g-factor from the splitting of Kondo resonances and find that it varies continuously in the range between |g*| = 5 and 15.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Molecular beam epitaxy and structural anisotropy of m-plane InN grown on free-standing GaN

This study reports on the growth of high-quality nonpolar m-plane [1100] InN films on free-standing m-plane GaN substrates by plasma-assisted molecular beam epitaxy. Optimized growth conditions (In/N ratio {approx}1 and T=390-430 deg. C) yielded very smooth InN films with undulated features elongated along the [1120] orientation. This directionality is associated with the underlying defect structure shown by the anisotropy of x-ray rocking curve widths parallel to the [1120] (i.e., 0.24 deg. - 0.34 deg.) and [0001] (i.e., 1.2 deg. - 2.7 deg.) orientations. Williamson-Hall analysis and transmission electron microscopy identified the mosaic tilt and lateral coherence length and their associations with different densities of dislocations and basal-plane stacking faults. Ultimately, very low band gap energies of {approx}0.67 eV were measured by optical absorption similar to the best c-plane InN.

36 MATERIALS SCIENCE↗

Growth of very large InN microcrystals by molecular beam epitaxy using epitaxial lateral overgrowth

Very thick InN (∼40 μm) was grown by molecular beam epitaxy using the epitaxial lateral overgrowth (ELO) technique. In some regions, the ELO of InN was observed as expected, indicating an important step toward fabricating quasi-bulk InN substrates. Interestingly, most parts of the sample consist of large flat-topped microcrystals and well-faceted microstructures. This is likely due to local growth condition variations during ELO, which is supported by an experiment where ELO of InN was performed on a substrate with various stripe mask patterns. TEM characterization of a flat top InN microcrystal revealed few stacking faults and only related threading dislocations. Defect-free small faceted microcrystals were also observed. The thick InN crystals show a narrow photoluminescence spectrum with a peak at 0.679 eV and linewidth of 16.8 meV at 4 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Elucidating structural order and disorder phenomena in mullite-type Al{sub 4}B{sub 2}O{sub 9} by automated electron diffraction tomography

The crystal structure and disorder phenomena of Al{sub 4}B{sub 2}O{sub 9}, an aluminum borate from the mullite-type family, were studied using automated diffraction tomography (ADT), a recently established method for collection and analysis of electron diffraction data. Al{sub 4}B{sub 2}O{sub 9}, prepared by sol-gel approach, crystallizes in the monoclinic space group C2/m. The ab initio structure determination based on three-dimensional electron diffraction data from single ordered crystals reveals that edge-connected AlO{sub 6} octahedra expanding along the b axis constitute the backbone. The ordered structure (A) was confirmed by TEM and HAADF-STEM images. Furthermore, disordered crystals with diffuse scattering along the b axis are observed. Analysis of the modulation pattern implies a mean superstructure (AAB) with a threefold b axis, where B corresponds to an A layer shifted by ½a and ½c. Diffraction patterns simulated for the AAB sequence including additional stacking disorder are in good agreement with experimental electron diffraction patterns. - Graphical abstract: Crystal structure and disorder phenomena of B-rich Al{sub 4}B{sub 2}O{sub 9} studied by automated electron diffraction tomography (ADT) and described by diffraction simulation using DISCUS. - Highlights: • Ab-initio structure solution by electron diffraction from single nanocrystals. • Detected modulation corresponding mainly to three-fold superstructure. • Diffuse diffraction streaks caused by stacking faults in disordered crystals. • Observed streaks explained by simulated electron diffraction patterns.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gold-free GaAs/GaAsSb heterostructure nanowires grown on silicon

Growth of GaAs/GaAsSb heterostructure nanowires on silicon without the need for gold seed particles is presented. A high vertical yield of GaAs nanowires is first obtained, and then GaAs{sub x}Sb{sub 1-x} segments are successfully grown axially in these nanowires. GaAsSb can also be integrated as a shell around the GaAs core. Finally, two GaAsSb segments are grown inside a GaAs nanowire and passivated using an Al{sub x}Ga{sub 1-x}As shell. It is found that no stacking faults or twin planes occur in the GaAsSb segments.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Capping of rare earth silicide nanowires on Si(001)

The capping of Tb and Dy silicide nanowires grown on Si(001) was studied using scanning tunneling microscopy and cross-sectional high-resolution transmission electron microscopy. Several nanometers thick amorphous Si films deposited at room temperature allow an even capping, while the nanowires maintain their original structural properties. Subsequent recrystallization by thermal annealing leads to more compact nanowire structures and to troughs in the Si layer above the nanowires, which may even reach down to the nanowires in the case of thin Si films, as well as to V-shaped stacking faults forming along (111) lattice planes. This behavior is related to strain due to the lattice mismatch between the Si overlayer and the nanowires.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

RBS-channeling study of radiation damage in Ar{sup +} implanted CuInSe{sub 2} crystals

Chalcopyrite solar cells are reported to have a high tolerance to irradiation by high energy electrons or ions, but the origin of this is not well understood. This work studies the evolution of damage in Ar{sup +}-bombarded CuInSe{sub 2} single crystal using Rutherford backscattering/channeling analysis. Ar{sup +} ions of 30 keV were implanted with doses in the range from 10{sup 12} to 3 × 10{sup 16} cm{sup −2} at room temperature. Implantation was found to create two layers of damage: (1) on the surface, caused by preferential sputtering of Se and Cu atoms; (2) at the layer of implanted Ar, possibly consisting of stacking faults and dislocation loops. The damage in the second layer was estimated to be less than 2% of the theoretical prediction suggesting efficient healing of primary implantation defects.

36 MATERIALS SCIENCE↗

Comparative study of 3C-SiC layers sublimation-grown on a 6H-SiC substrate

n-3C-SiC/n-6H-SiC heterostructures grown by vacuum sublimation on CREE commercial 6H-SiC substrates are studied. Transmission electron microscopy (TEM) demonstrated that a transitional layer of varying thickness, composed of a mixture of 3C- and 6H-SiC polytypes, is formed on the substrate. A 3C polytype layer was obtained on the interlayer. Cathodoluminescence study of the surface of the film demonstrated that defects in the form of inclusions of another phase (6H-polytype), stacking faults, and twin boundaries (separating domains of cubic modification, grown in various orientations) are found on the surface and in the surface layer with a thickness on the order of 100 {mu}m. Varying the growth conditions changes the concentration of various types of defects.

36 MATERIALS SCIENCE↗

Microstructural properties of phosphorus-doped p-type ZnO grown by radio-frequency magnetron sputtering

Phosphorus (P)-doped ZnO thin films were grown by radio-frequency magnetron sputtering to study the microstructural properties of p-type ZnO. As-grown P-doped ZnO, a semi-insulator, was converted to p-type ZnO after being annealed at 800 deg. C in an N{sub 2} ambient. X-ray diffraction, secondary-ion-mass spectrometry, and Hall effect measurements indicated that P{sub 2}O{sub 5} phases in as-grown P-doped ZnO disappeared after thermal annealing to form a substitutional P at an O lattice site, which acts as an acceptor in P-doped ZnO. Transmission electron microscopy showed that the formation of stacking faults was facilitated to release the strain in P-doped ZnO during post-thermal annealing.

36 MATERIALS SCIENCE↗

Shock-induced spall in copper: the effects of anisotropy, temperature, loading pulse and defect

Shock-induced spall in Cu is investigated with molecular dynamics simulations. We examine spallation in initially perfect crystals and defective solids with grain boundaries (columnar bicrystals), stacking faults or vacancies, as well as the effect of temperature and loading pulses. Spall in single crystal Cu is anisotropic, and defects and high temperature may reduce the spall strength. Taylor-wave (triangular shock-release wave) loading is explored in comparison with square wave shock loading.

36 MATERIALS SCIENCE↗

Efficient reduction of defects in (1120) non-polar and (1122) semi-polar GaN grown on nanorod templates

(1120) non-polar and (1122) semi-polar GaNs with a low defect density have been achieved by means of an overgrowth on nanorod templates, where a quick coalescence with a thickness even below 1 {mu}m occurs. On-axis and off-axis X-ray rocking curve measurements have shown a massive reduction in the linewidth for our overgrown GaN in comparison with standard GaN films grown on sapphire substrates. Transmission electron microscope observation demonstrates that the overgrowth on the nanorod templates takes advantage of an omni-directional growth around the sidewalls of the nanostructures. The dislocations redirect in basal planes during the overgrowth, leading to their annihilation and termination at voids formed due to a large lateral growth rate. In the non-polar GaN, the priority <0001> lateral growth from vertical sidewalls of nanorods allows basal plane stacking faults (BSFs) to be blocked in the nanorod gaps; while for semi-polar GaN, the propagation of BSFs starts to be impeded when the growth front is changed to be along inclined <0001> direction above the nanorods.

36 MATERIALS SCIENCE↗

Surface characterization of InP trenches embedded in oxide using scanning probe microscopy

Metrology for structural and electrical analyses at device level has been identified as one of the major challenges to be resolved for the sub-14 nm technology nodes. In these advanced nodes, new high mobility semiconductors, such as III–V compounds, are grown in narrow trenches on a Si substrate. Probing the nature of the defects, the defect density, and the role of processing steps on the surface of such structures are prime metrology requirements. In order to enable defect analysis on a (III–V) surface, a proper sample preparation for oxide removal is of primary importance. In this work, the effectiveness of different chemical cleanings and thermal annealing procedures is investigated on both blanket InP and oxide embedded InP trenches by means of scanning probe microscopy techniques. It is found that the most effective approach is a combination of an HCl-based chemical cleaning combined with a low-temperature thermal annealing leading to an oxide free surface with atomically flat areas. Scanning tunneling microscopy (STM) has been the preferred method for such investigations on blanket films due to its intrinsic sub-nm spatial resolution. However, its application on oxide embedded structures is non-trivial. To perform STM on the trenches of interest (generally <20 nm wide), we propose a combination of non-contact atomic force microscopy and STM using the same conductive atomic force microscopy tip Our results prove that with these procedures, it is possible to perform STM in narrow InP trenches showing stacking faults and surface reconstruction. Significant differences in terms of roughness and terrace formation are also observed between the blanket and the oxide embedded InP.

36 MATERIALS SCIENCE↗

In adlayer mediated molecular beam epitaxial growth and properties of a-plane InN on freestanding GaN

The role of the In adlayer on the morphological and structural properties of nonpolar a-plane InN films was elucidated during the plasma-assisted molecular beam epitaxy on freestanding GaN. Reflection high energy electron diffraction during In adsorption experiments on a-plane InN surfaces revealed a stable In adlayer coverage of {approx}2 ML. This In adlayer-mediated growth was responsible for achieving atomically smooth surfaces (rms roughness of <1 nm), phase-pure material with lower x-ray rocking curve widths ({delta}{omega}<0.5 deg.), lower crystal mosaic tilt/twist, and decreased stacking fault densities, compared to N-rich conditions. The photoluminescence peak emission and band gap energy of the a-plane InN films were {approx}0.63 and {approx}0.7 eV, respectively.

36 MATERIALS SCIENCE↗

Thermal transport in Cu{sub 2}ZnSnS{sub 4} thin films

The stability of kesterite Cu{sub 2}ZnSnS{sub 4} (CZTS) under a range of compositions leads to the formation of a number of stable defects that appear to be necessary for high efficiency photovoltaic applications. In this work, the impact of the presence of these defects on the thermal conductivity of CZTS thin films has been explored. Thermal conductivities of CZTS thin films, prepared by pulsed laser deposition with differing compositions, were measured from 80 K to room temperature using the 3ω-method. The temperature dependence of the thermal conductivity indicates that the phonon mean free path is limited by strain field induced point defect scattering from sulfur vacancies in sulfur deficient thin films. The sulfurization of these films in a 10% N{sub 2} + H{sub 2}S ambient at 500 °C increased the sulfur content of the films, reducing the concentration of sulfur vacancies, and produced a negligible change in grain size with an unexpected factor of 5 increase in phonon boundary scattering. This, along with anisotropies in the x-ray diffraction peak profiles of the sulfurized films, suggests that the phonon mean free path in sulfurized films is limited by the presence of cation exchange induced stacking faults. The resulting room temperature thermal conductivities for sulfurized and sulfur deficient thin films were found to be 4.0 W/m K and 0.9 W/m K, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗