Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shock structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Three-dimensional calculation of supersonic reacting flows using an LU scheme

A new three-dimensional numerical program incorporated with comprehensive real gas property models was developed to simulate supersonic reacting flows. The code employs an implicit finite volume, Lower-Upper (LU) time-marching method to solve the complete Navier-Stokes and species equations in a fully-coupled and very efficient manner. A chemistry model with nine species and eighteen reaction steps are adopted in the program to represent the chemical reaction of H2 and air. To demonstrate the capability of the program, flow fields of underexpanded hydrogen jets transversely injected into supersonic air stream inside the combustors of scramjets are calculated. Results clearly depict the flow characteristics, including the shock structure, separated flow regions around the injector, and the distribution of the combustion products.

Yu, Sheng-Tao↗
NASA NTRS1990

Implicit flux-split Euler schemes for unsteady aerodynamic analysis involving unstructured dynamic meshes

Improved algorithm for the solution of the time-dependent Euler equations are presented for unsteady aerodynamic analysis involving unstructured dynamic meshes. The improvements were developed recently to the spatial and temporal discretizations used by unstructured grid flow solvers. The spatial discretization involves a flux-split approach which is naturally dissipative and captures shock waves sharply with at most one grid point within the shock structure. The temporal discretization involves an implicit time-integration scheme using a Gauss-Seidel relaxation procedure which is computationally efficient for either steady or unsteady flow problems. For example, very large time steps may be used for rapid convergence to steady state, and the step size for unsteady cases may be selected for temporal accuracy rather than for numerical stability. Steady and unsteady flow results are presented for the NACA 0012 airfoil to demonstrate applications of the new Euler solvers. The unsteady results were obtained for the airfoil pitching harmonically about the quarter chord. The resulting instantaneous pressure distributions and lift and moment coefficients during a cycle of motion compare well with experimental data. A description of the Euler solvers is presented along with results and comparisons which assess the capability.

Batina, John T.↗
NASA NTRS1990

Three-dimensional flux-split Euler schemes involving unstructured dynamic meshes

Improved algorithms for the solution of the 3-D time dependent Euler equations are presented for aerodynamic analysis involving unstructured dynamic meshes. The improvements were developed recently to the spatial and temporal discretizations used by unstructured grid flow solvers. The spatial discretization involves a flux split approach which is naturally dissipative and captures shock waves sharply with at most one grid point within the shock structure. The temporal discretization involves either an explicit time integration scheme using a multistage Runge-Kutta procedure or an implicit time integration scheme using a Gauss-Seidel relaxation procedure which is computationally efficient for either steady or unsteady flow problems. With the implicit Gauss-Seidel procedure, very large time steps may be used for rapid convergence to steady state, and the step size for unsteady cases may be selected for temporal accuracy rather than for numerical stability. Steady flow results are presented for both the NACA 0012 airfoil and the ONERA M6 wing to demonstrate applications of the new Euler solvers. A description of the Euler solvers is presented along with results and comparisons which assess the capability.

Batina, John T.↗
NASA NTRS1990

CFD for hypersonic propulsion

An overview is given of research activity on the application of computational fluid dynamics (CDF) for hypersonic propulsion systems. After the initial consideration of the highly integrated nature of air-breathing hypersonic engines and airframe, attention is directed toward computations carried out for the components of the engine. A generic inlet configuration is considered in order to demonstrate the highly three dimensional viscous flow behavior occurring within rectangular inlets. Reacting flow computations for simple jet injection as well as for more complex combustion chambers are then discussed in order to show the capability of viscous finite rate chemical reaction computer simulations. Finally, the nozzle flow fields are demonstrated, showing the existence of complex shear layers and shock structure in the exhaust plume. The general issues associated with code validation as well as the specific issue associated with the use of CFD for design are discussed. A prognosis for the success of CFD in the design of future propulsion systems is offered.

Povinelli, Louis A.↗
NASA NTRS1990

A linear shock cell model for non-circular jets using conformal mapping with a pseudo-spectral hybrid scheme

The shock structure in non-circular supersonic jets is predicted using a linear model. This model includes the effects of the finite thickness of the mixing layer and the turbulence in the jet shear layer. A numerical solution is obtained using a conformal mapping grid generation scheme with a hybrid pseudo-spectral discretization method. The uniform pressure perturbation at the jet exit is approximated by a Fourier-Mathieu series. The pressure at downstream locations is obtained from an eigenfunction expansion that is matched to the pressure perturbation at the jet exit. Results are presented for a circular jet and for an elliptic jet of aspect ratio 2.0. Comparisons are made with experimental data.

Bhat, Thonse R. S.↗
NASA NTRS1990

Ground impingement of supersonic jets from nozzles with various exit geometries

Aerodynamc and acoustic measurements of single and twin free and impinging jets were made for circular convergent and CD nozzles, rectangular CD nozzles, and D-shaped convergent nozzles. Measured shock cell lengths and screech tone frequencies compare well with existing theory. Noise due to jet impingement correlates on the basis of the nozzle-to-ground distance relative to the free jet shock structure, with the highest sound pressure levels generally due to jet impingement tones. All nozzle types experienced near-field OASPL of 160 dB at some nozzle-to-ground distances, including the CD nozzles operating at their design pressure. The effect of the second jet was to sometimes increase levels due to twin jet resonance and at other times reduce levels due either to suppression of the screech/impingement feedback process or more simply by acoustic interference of the noise produced by the two jets.

Norum, Thomas D.↗
NASA NTRS1991

Formation of intermediate shocks in both two-fluid and hybrid models

Intermediate shocks are studied in a two-fluid model that includes finite ion inertia dispersion and in a hybrid model in which the full ion dynamics is retained while the electrons are treated as a massless fluid. It is shown that in both models intermediate shocks can be formed through wave steepening, meaning that they are stable and possess shock structures.

Wu, C. C.↗
NASA NTRS1988

The role of high pressure experiment and theory in our understanding of gaseous and icy planets

High pressure experiments provide essential data for modeling planetary structure. Shock wave experiments are often especially suitable because they sample the same region of pressure-temperature space that is achieved naturally within the planet during its evolution. A very brief overview of planetary properties is given, followed by a summary of the issues of current interest: the behavior of hydrogen and hydrogen-rich mixtures; C, N, and O at high pressure, and rock-ice mixtures.

Stevenson, David J.↗
NASA NTRS1991

Short conical solid/perforated plug-nozzle as supersonic jet noise suppressor

Experimental studies of the acoustic far field, and the nature of the repetitive shock structure in cold jet flows from an externally expanded plug-nozzle having a short conical plug with a pointed termination, operated in a range of supercritical pressure ratios of 2.0 to 4.5, are reported. The overall sound pressure levels of a short solid conical plug-nozzle (CPN) are found to be within 3 dB of those of the baseline noise levels of a minimum length contoured plug-nozzle operated at the same pressure ratio and having the same annular throat area. As compared to an equivalent convergent nozzle, the noise reductions achieved through the use of a short solid CPN are of the order of 5 dB.

Das, I. S.↗
NASA NTRS1991

Contraction ratio effects in a generic sidewall compression scramjet inlet - A computational and experimental investigation

Computed and experimental data on a generic three-dimensional sidewall compression scramjet inlet with a leading edge sweep of 45 degrees at Mach 20 are presented. A three-dimensional Navier-Stokes code was adapted to perform preliminary parametric studies leading to the present configuration. Following the design phase, the code was then employed as an analysis tool to provide a better understanding of the flow field and the experimental static and pitot pressure data. The model possessed 240 static pressure orifices distributed on the forebody plane, sidewalls, and cowl and was tested in the 31 Inch Mach 10 facility at the NASA Langley Research Center. Pitot rakes were employed to map the entrance and exit planes. The contraction ratio was observed to have a dominant effect on the inlet shock structure and performance; these effects are the emphasis of the present report. In addition to pressure measurements, oil flows were used for further visualization and comparison with computation.

Holland, Scott D.↗
NASA NTRS1991

Accuracy of an unstructured-grid upwind-Euler algorithm for the ONERA M6 wing

Improved algorithms for the solution of the three-dimensional, time-dependent Euler equations are presented for aerodynamic analysis involving unstructured dynamic meshes. The improvements have been developed recently to the spatial and temporal discretizations used by unstructured-grid flow solvers. The spatial discretization involves a flux-split approach that is naturally dissipative and captures shock waves sharply with at most one grid point within the shock structure. The temporal discretization involves either an explicit time-integration scheme using a multistage Runge-Kutta procedure or an implicit time-integration scheme using a Gauss-Seidel relaxation procedure, which is computationally efficient for either steady or unsteady flow problems. With the implicit Gauss-Seidel procedure, very large time steps may be used for rapid convergence to steady state, and the step size for unsteady cases may be selected for temporal accuracy rather than for numerical stability. Steady flow results are presented for both the NACA 0012 airfoil and the Office National d'Etudes et de Recherches Aerospatiales M6 wing to demonstrate applications of the new Euler solvers. The paper presents a description of the Euler solvers along with results and comparisons that assess the capability.

Batina, John T.↗
NASA NTRS1991

Statistical properties of shock-accelerated ions in the outer heliosphere

Reported here are statistical studied of interplanetary protons (about 0.5-1.5 MeV) as measured by the Voyager 2 spacecraft in the outer heliosphere between about 1 and 22 AU. The acceleration processes which produce the fluctuations in intensity of the protons throughout the interval studied are caused by solar flare-generated shock waves and corotating shock structures in the solar wind. It is found that the proton count rates can be represented by a lognormal distribution, independent of the phase of the solar cycle in which the measurements were made. Power spectra of the logarithm of the counts show that for frequencies in the range of about 0.02-0.5 cycles per day, the spectra can be characterized as about f exp -2. At lower frequencies, the spectra turn over and flatten. Over the entire frequency range studied, about 0.002-0.5 cycles per day, the spectra are therefore nonfractal. The rollover in the spectra at about 100 days probably represents the reorganization time for solar wind streams within the coronal source at the sun.

Lanzeroti, L. J.↗
NASA NTRS1991

Viscous three-dimensional calculations of transonic fan performance

A 3-D flow analysis code was used to compute the design speed operating line of a transonic fan rotor, and the results were compared with experimental data. The code is an explicit finite difference code with an algebraic turbulence model. The transonic fan, called rotor 67, was tested experimentally at NASA-Lewis with conventional aerodynamic probes and with user anemometry and was included as one of the AGARD test cases for the computation of internal flows. The experimental data are described. Maps of total pressure ratio and adiabatic efficiency versus mass flow were computed and are compared with the experimental maps, with good agreement. Detailed comparisons between calculations and experiment are made at two operating points, one near peak efficiency and the other near stall. Blade-to-blade contour plots are used to show the shock structure. Comparisons of circumferentially integrated flow quantities downstream of the rotor show spanwise distributions of several aerodynamic parameters. Calculated Mach number distributions are compared with laser anemometer data within the blade row and the wake to quantify the accuracy of the calculations. Particle traces are used to show the nature of secondary flow.

Chima, Rodrick V.↗
NASA NTRS1991

Three-dimensional calculations of supersonic reacting flows using an LU scheme

A 3-D numerical program that incorporates comprehensive real gas property models was developed to simulate supersonic reacting flows. The code employs an implicit, finite volume, Lower-Upper (LU), time-marching method to solve the complete Navier-Stokes and species equations in a fully-coupled and efficient manner. A chemistry model with 9 species and 18 reaction steps is adopted in the program to represent the chemical reactions of H2 and air. To demonstrate the capability of the program, flow fields of underexpanded hydrogen jets transversely injected into the supersonic airstream inside the combustors of scramjets are calculated. Results clearly depict the flow characteristics, including the shock structure, the separated flow regions around the injector, and the distribution of the combustion products.

Yu, Sheng-Tao↗
NASA NTRS1992

Viscous three-dimensional calculations of transonic fan performance

A 3-D flow analysis code was used to compute the design speed operating line of a transonic fan rotor, and the results were compared with experimental data. The code is an explicit finite difference code with an algebraic turbulence model. The transonic fan, called Rotor 67, was tested experimentally at NASA Lewis conventional aerodynamic probes and with user anemometry and was included as one of the AGARD test cases for the computation of internal flows. The experimental data are described. Maps of total pressure ratio and adiabatic efficiency vs mass flow were computed and are compared with the experimental maps, with good agreement. Detailed comparisons between calculations and experiment are made at two operating points, one near peak efficiency and the other near stall. Blade-to-blade contour plots are used to show the shock structure. Comparisons of circumferentially integrated flow quantities downstream of the rotor show spanwise distributions of several aerodynamic parameters. Calculated Mach number distributions are compared with laser anemometer data within the blade row and the wake to quantify the accuracy of the calculations. Particle traces are used to show the nature of secondary flow.

Chima, Rodrick V.↗
NASA NTRS1992

CFD lends the government a hand

The present survey of important and novel CFD applications being developed and implemented by U.S. Government contractors gives attention to naval vessel flow-modeling, Army ballistic and rotary wing aerodynamics, and NASA hypersonic vehicle related applications of CFD. CFD-generated knowledge of numerical algorithms, fluid motion, and supercomputer use is being incorporated into such additional areas as computational electromagnetics and acoustics. Attention is presently given to CFD methods' development status in such fields as submarine boundary layers, hypersonic kinetic energy projectile shock structures, helicopter main rotor tip flows, and National Aerospace Plane aerothermodynamics.

Lekoudis, Spiro↗
NASA NTRS1992

Leading edge sweep effects in generic three-dimensional sidewall compression scramjet inlets

A computational and experimental study of generic 3D sidewall compression inlets is conducted to examine the effects of fore and aft leading edge sweep on the internal shock structure. Inlets with leading edge sweeps of +30 deg and -30 deg with sidewall compression angles of 6 deg were tested in the NASA Langley Mach 4 air tunnel at a geometric contraction ratio of 1.87. The principal difference in performance was determined to be in the mass capture. Spillage was identified as having two components: a pressure induced component and a sweep induced component. It was found that while the direction of the leading edge sweep had a large influence on the spillage, the pressure effects were more important.

Cozart, Aaron B.↗
NASA NTRS1992

Internal shock interactions in propulsion/airframe integrated three-dimensional sidewall compression scramjet inlets

The advantages and design requirements of propulsion/airframe integration for high Mach number flight are studied in terms of the 3D sidewall compression scramjet inlet. The present work addresses in a parametric fashion the inviscid effects of leading edge sweep, sidewall compression, and inflow Mach number on the internal shock structure in terms of inlet compression and mass capture. The source of the Mach number invariance with leading edge sweep for a constant sidewall compression class of inlet is identified, and a previously undocumented spillage phenomenon in a constant effective wedge angle class of inlets is discussed.

Holland, Scott D.↗