Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Scaling Studies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Beware of fake ν ’s: The effect of massive neutrinos on the nonlinear evolution of cosmic structure

Massive neutrinos suppress the growth of cosmic structure on small, nonlinear scales. It is thus often proposed that using statistics beyond the power spectrum can tighten constraints on the neutrino mass by extracting additional information from these nonlinear scales. We study the information content regarding neutrino mass at the field level, quantifying how much of this information arises from the difference in nonlinear evolution between a cosmology with one fluid [cold dark matter (CDM)] and two fluids ( CDM + neutrinos ). We do so by running two N -body simulations, one with and one without massive neutrinos, both with the same phases, and matching their linear power spectrum at a given low redshift. This effectively isolates the information encoded in the linear initial conditions from the nonlinear cosmic evolution. We demonstrate that, for k ≲ 1 h / Mpc , and for a single redshift, there is negligible difference in the real-space CDM field between the two simulations. This suggests that all the information regarding neutrino mass is in the linear power spectrum set by the initial conditions. Thus, any probe based on the CDM field alone will have negligible constraining power beyond that which exists at the linear level over the same range of scales. Consequently, any probe based on the halo field will contain little information beyond the linear power. We find similar results for the matter field responsible for weak lensing. We also demonstrate that there may be much information beyond the power spectrum in the 3D matter field; however, this is not observable in modern surveys via dark matter halos or weak lensing. Finally, we show that there is additional information to be found in redshift space.

79 ASTRONOMY AND ASTROPHYSICS↗

Quantum Scaling in Energy Correlators beyond the Confinement Transition

We study the QCD scaling behavior of the small-angle energy-energy correlator (EEC), focusing on the transition between its perturbative preconfinement and nonperturbative postconfinement regimes. Applying the light-ray operator product expansion (OPE), we develop a formalism that describes the scaling of the EEC with the input energy 𝑄 in the transition and the postconfinement region, where the latter quantum scaling is determined by the 𝐽 = 5 DGLAP anomalous dimension. A key result of our Letter is a novel connection between the light-ray OPE and the dihadron fragmentation function (DFF), where we show that the nonperturbative OPE coefficients correspond to moments of the DFF. This finding establishes a new paradigm for studying hadronization. Our theoretical predictions are validated against Monte Carlo simulations for both 𝑒 + ⁢𝑒 − and 𝑝⁢𝑝 collisions, showing excellent agreement. The potential role of the quantum scaling in the precision determination of 𝛼 𝑠 is also discussed.

Chang, Cyuan-Han [University of Chicago, IL (Unite↗

A multi‐variable framework for selecting WRF physics configurations at convection‐permitting scales: An Amazon wet‐season case study

Tropical convection over rainforests modulates atmospheric circulation and the energy and hydrological cycles across multiple scales. However, the scarcity of observations still limits our understanding of these processes. Although numerical models are utilized to investigate atmospheric physical processes, their performance depends on the choice of parameterizations and grid resolution. Here, in this work, we introduce and apply a multi‐variable, multi‐physics framework to evaluate and rank the Advanced Research Weather Research and Forecasting (WRF–ARW) configurations at 1‐km resolution over the central Amazon during the wet season. A 48‐member ensemble combines three land‐surface models (LSMs), four planetary boundary layer (PBL), and four microphysics (MP) schemes. Model performance for seven convection‐related near‐surface and boundary‐layer variables is assessed using Taylor diagrams and the Taylor skill score (TSS), analysis of variance (ANOVA)‐based sensitivity metrics, and non‐parametric rank tests. We then construct a combined, weighted TSS to identify configurations that are comparatively robust across variables. Results showed that most configurations reproduce near‐surface temperature, sensible and latent heat fluxes, and boundary‐layer height reasonably well, whereas humidity and rainfall remain challenging. LSM choice has the strongest impact on the surface fluxes and a secondary influence on near‐surface temperature and humidity, PBL schemes dominate boundary‐layer height, and MP schemes exert the largest control on rainfall. No single configuration is optimal for all variables, but the combination of Noah (LSM), Yonsei University (PBL), and Morrison (MP) emerges as the most robust configuration for this case, with the WRF single‐moment six‐class scheme (WSM6) providing a competitive, computationally cheaper MP alternative. The framework is general and can be applied to other regions, seasons, and convective regimes.

Amazon rainforest↗

Simulation of PV Variability as a Function of PV Generation and Plant Size

The deployment of photovoltaic (PV) systems continues to show significant expansion; however, this growth has brought added attention to issues around the variability of the solar resource. Both spatial and temporal variability exist. Temporal scales can range from the sub-second to multiyear, whereas spatial scales can range from a few meters to tens of kilometers. There are multiple methods described in the literature to quantify PV variability at various spatial and temporal scales. This study focuses on short-term temporal variability and uses similar approaches with the addition of PV plant size a parameter to quantify variability. The method employed here incorporates the normalization of clear-and cloudy-sky conditions and PV plant size to quantify nominal variability metrics. The distribution and fluctuations of these metrics provide relevant information that is useful for system operations. The National Solar Radiation Database (NSRDB) is used to simulate PV variability as a function of PV generation and plant size. Hypothetical but realistic system information at 33 locations is used to model PV generation by feeding NSRDB solar irradiance data to the National Renewable Energy Laboratory’s System Advisor Model (SAM). Over the selected region, it is found that the aggregated ramp rates for the 1-minute data are associated with standard deviations ranging from 0.002–0.055 on a daily basis; however, hourly intervals induce higher aggregated ramp rates than the other timescales. Even though minute-to-minute variations are significant for the 1-minute time-scale, the standard deviation aggregated into a daily metric is smaller because of the cancellation of values.

irradiance↗

Brain ageing in schizophrenia: evidence from 26 international cohorts via the ENIGMA Schizophrenia consortium

Schizophrenia (SZ) is associated with an increased risk of life-long cognitive impairments, age-related chronic disease, and premature mortality. We investigated evidence for advanced brain ageing in adult SZ patients, and whether this was associated with clinical characteristics in a prospective meta-analytic study conducted by the ENIGMA Schizophrenia Working Group. The study included data from 26 cohorts worldwide, with a total of 2803 SZ patients (mean age 34.2 years; range 18–72 years; 67% male) and 2598 healthy controls (mean age 33.8 years, range 18–73 years, 55% male). Brain-predicted age was individually estimated using a model trained on independent data based on 68 measures of cortical thickness and surface area, 7 subcortical volumes, lateral ventricular volumes and total intracranial volume, all derived from T1-weighted brain magnetic resonance imaging (MRI) scans. Deviations from a healthy brain ageing trajectory were assessed by the difference between brain-predicted age and chronological age (brain-predicted age difference [brain-PAD]). On average, SZ patients showed a higher brain-PAD of +3.55 years (95% CI: 2.91, 4.19; I 2 = 57.53%) compared to controls, after adjusting for age, sex and site (Cohen’s d = 0.48). Among SZ patients, brain-PAD was not associated with specific clinical characteristics (age of onset, duration of illness, symptom severity, or antipsychotic use and dose). This large-scale collaborative study suggests advanced structural brain ageing in SZ. Longitudinal studies of SZ and a range of mental and somatic health outcomes will help to further evaluate the clinical implications of increased brain-PAD and its ability to be influenced by interventions.

59 BASIC BIOLOGICAL SCIENCES↗

Galaxy pairs in the Sloan Digital Sky Survey – XV. Properties of ionized outflows

ABSTRACT Powerful outflows are thought to play a critical role in galaxy evolution and black hole growth. We present the first large-scale systematic study of ionized outflows in paired galaxies and post-mergers compared to a robust control sample of isolated galaxies. We isolate the impact of the merger environment to determine if outflow properties depend on merger stage. Our sample contains ∼4000 paired galaxies and ∼250 post-mergers in the local universe (0.02 ≤ z ≤ 0.2) from the Sloan Digital Sky Survey Data Release 7 (SDSS DR 7) matched in stellar mass, redshift, local density of galaxies, and [O iii] λ5007 luminosity to a control sample of isolated galaxies. By fitting the [O iii] λ5007 line, we find ionized outflows in ∼15 per cent of our entire sample. Outflows are much rarer in star-forming galaxies compared to active galactic nuclei (AGNs), and outflow incidence and velocity increase with [O iii] λ5007 luminosity. Outflow incidence is significantly elevated in the optical + mid-infrared selected AGN compared to purely optical AGN; over 60 per cent show outflows at the highest luminosities ($L_{\mathrm{[OIII]~\lambda 5007}}\, \gtrsim$ 1042 erg s−1), suggesting mid-infrared AGN selection favours galaxies with powerful outflows, at least for higher [O iii] λ5007 luminosities. However, we find no statistically significant difference in outflow incidence, velocity, and luminosity in mergers compared to isolated galaxies, and there is no dependence on merger stage. Therefore, while interactions are predicted to drive gas inflows and subsequently trigger nuclear star formation and accretion activity, when the power source of the outflow is controlled for, the merging environment has no further impact on the large-scale ionized outflows as traced by [O iii] λ5007.

79 ASTRONOMY AND ASTROPHYSICS↗

Evidence for galaxy assembly bias in BOSS CMASS redshift-space galaxy correlation function

ABSTRACT Building accurate and flexible galaxy–halo connection models is crucial in modelling galaxy clustering on non-linear scales. Recent studies have found that halo concentration by itself cannot capture the full galaxy assembly bias effect and that the local environment of the halo can be an excellent indicator of galaxy assembly bias. In this paper, we propose an extended halo occupation distribution (HOD) model that includes both a concentration-based assembly bias term and an environment-based assembly bias term. We use this model to achieve a good fit (χ2/degrees of freedom = 1.35) on the 2D redshift-space two-point correlation function (2PCF) of the Baryon Oscillation Spectroscopic Survey (BOSS) CMASS galaxy sample. We find that the inclusion of both assembly bias terms is strongly favoured by the data and the standard five-parameter HOD model is strongly rejected. More interestingly, the redshift-space 2PCF drives the assembly bias parameters in a way that preferentially assigns galaxies to lower mass haloes. This results in galaxy–galaxy lensing predictions that are within 1σ agreement with the observation, alleviating the perceived tension between galaxy clustering and lensing. We also showcase a consistent 3σ–5σ preference for a positive environment-based assembly bias that persists over variations in the fit. We speculate that the environmental dependence might be driven by underlying processes such as mergers and feedback, but might also be indicative of a larger halo boundaries such as the splashback radius. Regardless, this work highlights the importance of building flexible galaxy–halo connection models and demonstrates the extra constraining power of the redshift-space 2PCF.

79 ASTRONOMY AND ASTROPHYSICS↗

Pore Resolved Simulations of Joule Heating in Fibrous Media using an Embedded Boundary Method

Joule heating has been regarded as an energy-efficient and sustainable method for heating materials and gases at large scales. The modeling of local temperature effects at pore-resolved scales for such systems, however, has been difficult to achieve due to challenges in coupling thermo-chemical processes in complex porous media and in large representative volume elements (RVEs). To this end, we developed an electro-thermal model at the pore scale to study Joule heating effects in large heterogeneous systems with different microstructures. This was achieved using the level set method to implicitly delineate distinct regions within the domain, and an embedded boundary method to facilitate heat exchange across the fluid-solid interface. Moreover, we applied this method to investigate unsteady non-linear electro-thermal effects in non-woven fibrous graphite conductors for RVEs with characteristic lengths of 2 mm, with different fiber orientations, porosity (80% – 90%) and fiber diameters (10 – 20µm). The coupled equations were solved numerically and they produced peak temperatures greater than 2000 K resulting in heating rates as high as 80,000 K/s. Moreover, the results depended strongly on the microstructure of the fiber skeleton and current density. Geometries with large fibers (∼ 20µm) had the highest average and peak temperatures with the mean temperature increasing by 3.9 % while the peak temperature increased by 9.9 %. Anisotropic domains on the other hand had the lowest mean and peak temperatures with peak and mean temperatures of 2293 K and 1437.7K respectively representing a corresponding 12.1% and 5.1% drop in the temperatures. An increase in porosity from 80% to 90%, however, led to an increase in the peak temperature by 5.1%.

Joule heating↗

Probing small-scale power spectra with pulsar timing arrays

Models of Dark Matter (DM) can leave unique imprints on the Universe’s small scale structure by boosting density perturbations on small scales. We study the capability of Pulsar Timing Arrays to search for, and constrain, subhalos from such models. The models of DM we consider are ordinary adiabatic perturbations in ΛCDM, QCD axion miniclusters, models with early matter domination, and vector DM produced during inflation. We show that ΛCDM, largely due to tidal stripping effects in the Milky Way, is out of reach for PTAs. Axion miniclusters may be within reach, although this depends crucially on whether the axion relic density is dominated by the misalignment or string contribution. Models where there is matter domination with a reheat temperature below 1 GeV may be observed with future PTAs. Lastly, vector DM produced during inflation can be detected if it is lighter than 10 16 GeV. We also make publicly available a Python Monte Carlo tool for generating the PTA time delay signal from any model of DM substructure.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Plant-specific microbial diversity facilitates functional redundancy at the soil-root interface

Abstract Aims Plant-specific microbial diversity reflecting host-microbe coevolution was frequently shown at the structural level but less on the functional scale. We studied the microbiome of three compartments at the soil root interface (root endosphere, rhizosphere, bulk soil) of medicinal plants cultivated under organic management in Egypt. The study aimed to examine the impact of the rhizosphere on microbial community composition and diversity in desert agricultural soil, as well as to identify specific functions associated with the rhizosphere. Methods The microbiome community structure, diversity, and microbial functioning were evaluated through the utilization of 16S rRNA gene amplicon and shotgun metagenome sequencing. Results We found the typical rhizosphere effect and plant-species-specific enrichment of bacterial diversity. The annual plants Calendula officinalis and Matricaria chamomilla ( Asteraceae ) were more similar than the perennial Solanum distichum ( Solanaceae ). Altogether, plant species explained 50.5% of the variation in bacterial community structures in the rhizosphere. Our results indicate a stronger effect of the plant species in terms of modulating bacterial community structures in the rhizosphere than in root endosphere samples. The plant-driven rhizosphere effect could be linked to redundant plant beneficial functions in the microbiome, while enrichment of specific genes related to amino acid ion transport and metabolism, carbohydrate transport and metabolism, defense mechanisms, and secondary metabolites biosynthesis were more specific. Conclusions The study explores the microbiome continuum at the soil-root interface of medicinal plant species, revealing significant bacterial community structure shifts and plant specificity. The study provides insights into the essential microbiome components contributing to rhizosphere functionality.

Wicaksono, Wisnu Adi (ORCID:0000000215561981)↗

Beam–beam effects and mitigation in a future proton–proton collider

The beam–beam effects in a hadron collider with an unprecedented energy scale were studied. These effects are strongly related to the attainable luminosity of the collider. Long-range interactions were identified as the major factor limiting the dynamic aperture, which is strongly dependent on the crossing angle, β*, and bunch population. Different mitigation methods of the beam–beam effects were addressed, with a focus on the compensation of long-range interactions by electric current wires. The CEPC-SPPC project is a two-stage large circular collider, with a first-stage circular electron–positron collider (CEPC) and a second-stage super proton–proton collider (SPPC). The design of the SPPC aims to achieve a center-of-mass energy of 75 TeV and peak luminosity of approximately 1 × 10$^{35}$ cm$^{-2}$ s$^{-1}$. We studied the beam–beam effects in the SPPC and tested the effectiveness of the mitigation methods. We found that with compensation using electric current wires, the dynamic aperture is at an acceptable level. Moreover, considering the significant emittance damping in this future proton–proton collider, the beam–beam effects and compensation are more complicated and are studied using long-term tracking. It was found that with a smaller emittance, the head-on interactions with a crossing angle become more prominent in reducing the beam stability, and combined head-on and long-range compensation is needed to improve the beam quality. When the reduction in population owing to burn-off was included, it was found that the coupling between the transverse and longitudinal planes at smaller emittance is the main driving source of the instabilities. Thus, crab cavities and emittance control are also necessary than just the compensation of the long-range interactions to improve the beam stability. This study serves as an example for studying the beam–beam effects in future proton–proton colliders.

43 PARTICLE ACCELERATORS↗

Atomic-scale mechanisms of void strengthening in tungsten

Neutron and heavy-ion irradiation of tungsten produces nanometer-size vacancy voids, gas-filled bubbles and dislocation loops. These defect features can affect mechanical properties and the impact can be quite significant because of their high density. Understanding the basic mechanisms of mechanical properties degradation is necessary for predicting radiation effects. Predictions can be made using discrete dislocation dynamics or/and finite element approaches which, however, need local interaction mechanisms as inputs. Such knowledge can be provided only by atomic-scale modeling. This paper reports the results of an extensive atomic-scale modeling study of the interactions between moving edge dislocations and voids in tungsten. Furthermore, the main focus is on the effects of the void size and ambient temperature. Critical resolved shear stress was calculated for voids up to 9 nm in diameter. Atomistic results are compared with the theoretical approach and with those obtained earlier for voids in body centered cubic (bcc) iron. An important role of the void surface has been revealed.

36 MATERIALS SCIENCE↗

Techno-economic prospects for producing Fischer-Tropsch jet fuel and electricity from lignite and woody biomass with CO 2 capture for EOR

This work explores the prospective techno-economic performance of facilities that produce low- and net-negative-carbon liquid transportation fuels and electricity with CO 2 capture for enhanced oil recovery. The lignite and biomass-to-jet fuel process is based on KBR’s TRIG gasifier, Rectisol (for sulfur removal and CO 2 capture), fixed-bed low temperature Fischer-Tropsch synthesis of liquid fuels, and Brayton/Rankine combined cycles to convert synthesis/refining off-gases and waste heat to electricity. This work leverages a recent, highly-detailed assessment of a prospective first-of-a-kind (FOAK) demonstration facility to develop highly detailed Aspen Plus process simulations for nine prospective N th -of-a-kind (NOAK) plant equipment configurations. Component-level capital costs from the FOAK study are scaled and adjusted to reflective prospective learning-by-doing to estimate capital costs for the NOAK designs. NOAK plant economic performance is found to be largely insensitive to variations in plant configurations and electricity output fraction, but biomass input fraction significantly affects profitability. Facilities that consume only carbon–neutral biomass, with no lignite co-feed, have significantly net-negative carbon emissions and the most favorable prospective economics when carbon emissions are priced. For these facilities, the crude oil price required for plant economic viability falls rapidly from $\$$100/bbl as carbon emission prices increase above $\$$120/tonne CO 2eq . In general, plants that co-fire lignite with biomass are less profitable (than 100% biomass plants) due to their higher net greenhouse gas emissions.

09 BIOMASS FUELS↗

Evaluation of hydroxamate-based resins towards a more clinically viable 44 Ti/ 44 Sc radionuclide generator

For this research, several hydroxamate-based resins were synthesized and tested for use in 44 Ti/ 44 Sc generator systems in small scale experiments (740 kBq 44 Ti). The most promising resin was tested further in larger scale generator studies (37 MBq). This resin displayed impressive retention of 44 Ti over several elutions, and high quantities of 44 Sc were obtained in small volumes of dilute HCl eluents. Initial radiolabeling experiments were conducted and demonstrated the possibility of direct radiolabeling of the generator produced 44 Sc with DOTA.

07 ISOTOPE AND RADIATION SOURCES↗

Adoption of perennial energy crops in the US Midwest: Causal and heterogeneous determinants

The success of a bioenergy policy relies largely on the wide adoption of perennial energy crops at the farm-scale. This study uses survey data to examine potential adoption decisions by farmers in the US Midwest and the causal effects of various direct and indirect influencing factors, especially heterogeneous preferences of farmers. A Bayesian network (BN) model is developed to delineate the causal-relationship between farmers adoption decisions and the influencing factors. Here, we find a dominating role of economic factors and a non-negligible impact of non-economic factors, such as the perceived environmental benefits and the extent of familiarity with perennial energy crops. To examine the effect of heterogeneity in farmer preferences, we classify the surveyed farmers into four categories based on their attitudes toward the economic, social, and environmental dimensions of perennial energy crops. We identify statistically significant between-group differences in the responses of the four types of farmers to the various influencing factors. Our findings contribute to disentangling the complicated motivations that will influence perennial energy crop adoption decisions and provide implications for more targeted policy development that need to consider the heterogeneous drivers of farmer decisions about land use.

09 BIOMASS FUELS↗

A consolidated bioprocess design to produce multiple high-value platform chemicals from lignocellulosic biomass and its technoeconomic feasibility

5-Hydroxymethyl furfural (HMF) and furfurals are DOE-listed platform chemicals that can be derived from the renewable carbon in the lignocellulosic biomasses and have the potential to replace petroleum-derived alter- natives. High substrate cost and use of expensive solvents limit the economic feasibility of bio-based HMF production on an industrially relevant scale. The study presents an experimental optimized condition that maximizes the chemical-free production of HMF and furfurals without lowering the yield of total fermentable sugars from Saccharum bagasse. Hydrothermal pretreatment at 210 °C for 15 min yielded approximately 10%, 12%, and 46% of HMF, furfurals, and fermentable sugars per gram of dry biomass, respectively. Additionally, the study proposes a consolidated bioprocess model to produce and recover four high-value bioproducts i.e., HMF, furfurals, ethanol, and acetic acid based on the experimental results and evaluates its technoeconomic feasibility considering HMF as the main product. The minimum selling price (MSP) of HMF was estimated to be 930.6 USD/ t which is competitive with its petroleum-derived precursor alternative p-xylene (1,113 USD/t). The sensitivity analysis performed for the process parameters suggests that pretreatment cost and revenues from coproducts immensely influence the MSP of HMF. The preliminary technoeconomic analysis performed on the consolidated bioprocess design indicates that additional revenue streams from diversified coproducts in biorefineries aid in lowering the MSP of high-value bioproducts.

09 BIOMASS FUELS↗

Estimating biofuel contaminant concentration from 4D ERT with mixing models

Here, we present the results of a lab-scaled feasibility study to assess the performance of electrical resistivity tomography for detection, characterization, and monitoring of fuel grade ethanol releases to the subsurface. Further, we attempt to determine the concentration distribution of the ethanol from the electrical resistivity tomography data using mixing-models. Ethanol is a renewable fuel source as well as an oxygenate fuel additive currently used to replace the known carcinogen methyl tert-butyl ether; however, ethanol is preferentially biodegraded and a cosolvent. When introduced to areas previously impacted by nonethanol-based fuels, it will facilitate the persistence of carcinogenic fuel compounds like benzene and ethylbenzene, as well as remobilize them to the ground water. These compounds would otherwise be retained in the soil column undergoing active or passive remediation processes such as soil vapor extraction or natural attenuation. Here, we introduce ethanol to a saturated Ottawa sand in a tank instrumented for four-dimensional geoelectrical measurements. Forward model results suggest pure phase ethanol released into a water saturated silica sand should present a detectable target for electrical resistivity tomography relative to a saturated silica sand only. We observe the introduction of ethanol to the closed hydraulic system and subsequent migration over the duration of the experiment. One-dimensional and three–dimensional temporal data are assessed for the detection, characterization, and monitoring of the ethanol release. Results suggest one-dimensional geoelectrical measurements may be useful for monitoring a release, while three-dimensional geoelectrical field imaging would be useful to characterize, monitor, and design effective remediation approaches for an ethanol release, assuming field conditions do not preclude the application of geoelectrical methods. We then attempt to use predictive mixing models to calculate the distribution of ethanol concentration within the measurement domain. For this study we examine four different models: a nested parallel mixing model, a nested cubic mixing model, the complex refractive index model (CRIM), and the Lichtenecker-Rother (L-R) model. The L-R model, modified to include an electrical formation factor geometry term, provided the best agreement with expected EtOH concentrations.

09 BIOMASS FUELS↗

A non-intrusive optical (NIO) approach to characterize heliostats in utility-scale power tower plants: Sensitivity study

Power towers, a type of concentrating power tower technology, use a large number of heliostats to concentrate sunlight and produce renewable energy. Optical errors of heliostats can cause drastic losses in the efficiency of power-tower plants. Accurately measuring optical errors is crucial to assessing and improving plant performance. This analysis discusses an innovate non-intrusive optical (NIO) approach to measure slope, canting, and tracking errors by detecting distortions in the reflected tower structure in heliostat images. Further in this work a sensitivity study is carefully conducted to determine the uncertainty requirements to allow the method to calculate slope errors with an accuracy of 0.25 mrad. Measurement uncertainty sources include camera resolution and position uncertainty, tower position uncertainty, and number of collected images. Each uncertainty source is investigated to determine its impact on the accuracy of the slope-error calculation. A combination of theoretical results and experimental results obtained from data collected on a heliostat at Sandia National Laboratories is used to determine and validate uncertainty requirements. The analysis shows that a measurement uncertainty of 0.25 mrad can be realized by realistically controlling uncertainty sources when implementing the NIO method. It demonstrates the superior performance of NIO in performing in-situ optical characterization.

14 SOLAR ENERGY↗