Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Scale analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Optical breakdown threshold investigation of 1064 nm laser induced air plasmas

We present the theoretical and experimental measurements and analysis of the optical breakdown threshold for dry air by 1064 nm infrared laser radiation and the significance of the multiphoton and collisional cascade ionization process on the breakdown threshold measurements over pressures range from 10 to 2000 Torr. Theoretical estimates of the breakdown threshold laser intensities and electric fields are obtained using two distinct theories namely multiphoton and collisional cascade ionization theories. The theoretical estimates are validated by experimental measurements and analysis of laser induced breakdown processes in dry air at a wavelength of 1064 nm by focusing 450 mJ max, 6 ns, 75 MW max high-power 1064 nm IR laser radiation onto a 20 {mu}m radius spot size that produces laser intensities up to 3 - 6 TW/cm{sup 2}, sufficient for air ionization over the pressures of interest ranging from 10 to 2000 Torr. Analysis of the measured breakdown threshold laser intensities and electric fields are carried out in relation with classical and quantum theoretical ionization processes, operating pressures. Comparative analysis of the laser air breakdown results at 1064 nm with corresponding results of a shorter laser wavelength (193 nm) [M. Thiyagarajan and J. E. Scharer, IEEE Trans. Plasma Sci. 36, 2512 (2008)] and a longer microwave wavelength (10{sup 8} nm) [A. D. MacDonald, Microwave Breakdown in Gases (Wiley, New York, 1966)]. A universal scaling analysis of the breakdown threshold measurements provided a direct comparison of breakdown threshold values over a wide range of frequencies ranging from microwave to ultraviolet frequencies. Comparison of 1064 nm laser induced effective field intensities for air breakdown measurements with data calculated based on the collisional cascade and multiphoton breakdown theories is used successfully to determine the scaled collisional microwave portion. The measured breakdown threshold of 1064 nm laser intensities are then scaled to classical microwave breakdown theory after correcting for the multiphoton ionization process for different pressures and good agreement, regarding both pressure dependence and breakdown threshold electric fields, is obtained. The effect of the presence of submicron particles on the 1064 nm breakdown threshold was also investigated. The measurements show that higher breakdown field is required, especially at lower pressures, and in close agreement with classical microwave breakdown theory and measurements in air.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A multi-level anomaly detection algorithm for time-varying graph data with interactive visualization

This work presents a novel modeling and analysis framework for graph sequences which addresses the challenge of detecting and contextualizing anomalies in labelled, streaming graph data. We introduce a generalization of the BTER model of Seshadhri et al. by adding flexibility to community structure, and use this model to perform multi-scale graph anomaly detection. Specifically, probability models describing coarse subgraphs are built by aggregating node probabilities, and these related hierarchical models simultaneously detect deviations from expectation. This technique provides insight into a graph's structure and internal context that may shed light on a detected event. Additionally, this multi-scale analysis facilitates intuitive visualizations by allowing users to narrow focus from an anomalous graph to particular subgraphs or nodes causing the anomaly. For evaluation, two hierarchical anomaly detectors are tested against a baseline Gaussian method on a series of sampled graphs. We demonstrate that our graph statistics-based approach outperforms both a distribution-based detector and the baseline in a labeled setting with community structure, and it accurately detects anomalies in synthetic and real-world datasets at the node, subgraph, and graph levels. Furthermore, to illustrate the accessibility of information made possible via this technique, the anomaly detector and an associated interactive visualization tool are tested on NCAA football data, where teams and conferences that moved within the league are identified with perfect recall, and precision greater than 0.786.

97 MATHEMATICS AND COMPUTING↗

Monopole scaling dimension using Monte-Carlo simulation

In this paper, we present a practical Monte Carlo determination of the scaling dimensions Δ Q of flux Q Abelian monopoles through finite-size scaling analysis of the free energy to introduce the background field of classical Dirac monopole-antimonopole pair at critical points of three-dimensional lattice theories. We validate the method in free fermion theory, and by verifying the particle-vortex duality between the monopole scaling dimension at the inverse-XY fixed point and the charge scaling dimension at the XY fixed point. Finally, at the O(2) Wilson-Fisher fixed point of the XY model, we determine the critical exponents Δ 1 = 0.13(2), Δ 2 = 0.29(1) and Δ 3 = 0.47(2), which we find to be proportional to the finite-size critical spectrum of monopoles on square torus.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Multi-Level Anomaly Detection on Time-Varying Graph Data

This work presents a novel modeling and analysis framework for graph sequences which addresses the challenge of detecting and contextualizing anomalies in labelled, streaming graph data. We introduce a generalization of the BTER model of Seshadhri et al. by adding flexibility to community structure, and use this model to perform multi-scale graph anomaly detection. Specifically, probability models describing coarse subgraphs are built by aggregating probabilities at finer levels, and these closely related hierarchical models simultaneously detect deviations from expectation. This technique provides insight into a graph's structure and internal context that may shed light on a detected event. Additionally, this multi-scale analysis facilitates intuitive visualizations by allowing users to narrow focus from an anomalous graph to particular subgraphs or nodes causing the anomaly. For evaluation, two hierarchical anomaly detectors are tested against a baseline Gaussian method on a series of sampled graphs. We demonstrate that our graph statistics-based approach outperforms both a distribution-based detector and the baseline in a labeled setting with community structure, and it accurately detects anomalies in synthetic and real-world datasets at the node, subgraph, and graph levels. To illustrate the accessibility of information made possible via this technique, the anomaly detector and an associated interactive visualization tool are tested on NCAA football data, where teams and conferences that moved within the league are identified with perfect recall, and precision greater than 0.786.

anomaly detection↗

Multiscale-Informed Modeling of High Temperature Component Response with Uncertainty Quantification

This report summarizes a joint effort between Argonne National Laboratory, Idaho National Laboratory, and Los Alamos National Laboratory to develop and deploy constitutive models targeted at predicting the life of Grade 91 alloy components subjected to high temperature environments typical of those that structural components in advanced nuclear reactors would experience. Two distinct, but complementary constitutive modeling approaches have been taken here. The first employs a phenomenological viscoplastic model for which parameters have been calibrated based on experimental data for a wide range of Grade 91 alloy that has undergone a variety of processing. A Bayesian approach was used to derive distributions of uncertain parameters for this model based on this data set. The second approach is a reduced order model suitable for engineering-scale analysis that is based on the results of a large set of mesoscale simulations. Mesoscale models allow for the microstructure and composition of a particular alloy to be directly taken into account in the computation of the viscoplastic response, but are computationally expensive, which makes it impractical to directly call those models for the material constitutive response in an engineering-scale simulation. The reduced-order representation of the response of the underlying model used here allows for an engineering-scale model to take into account the characteristics of the underlying microstructure, while only incurring a reasonable computational expense. Both of these approaches have different strengths, and are applicable for different parts of the design/analysis process. The phenomenological models can be readily parameterized based on a set of experimental data for a given class of materials and used for scoping calculations. Once a specific material is chosen and adequately characterized, the reduced order models can accurately predict the response of that specific alloy, and because the models are based on predictive models of the underlying microstructure, they can be used to more confidently predict the response under conditions in regions where there is limited experimental data. Both of these models have been integrated in the Grizzly code, which is used here to perform proof-of-concept uncertainty quantification analyses of a simple component under prototypical conditions. The built- in stochastic analysis capabilities in the MOOSE framework that Grizzly is built on are used here to run large sets of simulations for this uncertainty quantification analysis. As would be expected, because the reduced order models are developed for a much more tightly defined alloy, they predict tighter distributions of the time to failure than the phenomenological models, which are calibrated to a broader set of data. Also important is that these simulations demonstrate that a reduced order modeling approach can be successfully deployed to propagate uncertainties from the material scale to practical engineering-scale component simulations.

42 ENGINEERING↗

Three-State Majority-vote Model on Scale-Free Networks and the Unitary Relation for Critical Exponents

Abstract We investigate the three-state majority-vote model for opinion dynamics on scale-free and regular networks. In this model, an individual selects an opinion equal to the opinion of the majority of its neighbors with probability 1 − q , and different to it with probability q . The parameter q is called the noise parameter of the model. We build a network of interactions where z neighbors are selected by each added site in the system, a preferential attachment network with degree distribution k − λ , where λ = 3 for a large number of nodes N . In this work, z is called the growth parameter. Using finite-size scaling analysis, we obtain that the critical exponents $$\beta /\bar{\nu }$$ β / ν ¯ and $$\gamma /\bar{\nu }$$ γ / ν ¯ associated with the magnetization and the susceptibility, respectively. Using Monte Carlo simulations, we calculate the critical noise parameter q c as a function of z for the scale-free networks and obtain the phase diagram of the model. We find that the critical exponents add up to unity when using a special volumetric scaling, regardless of the dimension of the network of interactions. We verify this result by obtaining the critical noise and the critical exponents for the two and three-state majority-vote model on cubic lattice networks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigation of Natural Circulation Instability and Transients in Passively Safe Small Modular Reactors

The NEUP funded project, NEUP-3496, aims to experimentally investigate two-phase natural circulation flow instability that could occur in Small Modular Reactors (SMRs), especially for natural circulation SMRs. The objective has been achieved by systematically performing tests to study the general natural circulation instability characteristics and the natural circulation behavior under start-up or design basis accident conditions. Experimental data sets highlighting the effect of void reactivity feedback as well as the effect of power ramp-up rate and system pressure have been used to develop a comprehensive stability map. The safety analysis code, RELAP5, has been used to evaluate experimental results and models. Improvements to the constitutive relations for flashing have been made in order to develop a reliable analysis tool. This research has been focusing on two generic SMR designs, i.e. a small modular Simplified Boiling Water Reactor (SBWR) like design and a small integral Pressurized Water Reactor (PWR) like design. A BWR-type natural circulation test facility was firstly built based on the three-level scaling analysis of the Purdue Novel Modular Reactor (NMR) with an electric output of 50 MWe, namely NMR-50, which represents a BWR-type SMR with a significantly reduced reactor pressure vessel (RPV) height. The experimental facility was installed with various equipment to measure thermalhydraulic parameters such as pressure, temperature, mass flow rate and void fraction. Characterization tests were performed before the startup transient tests and quasi-steady tests to determine the loop flow resistance. The control system and data acquisition system were programmed with LabVIEW to realize the realtime control and data storage. The thermal-hydraulic and nuclear coupled startup transients were performed to investigate the flow instabilities at low pressure and low power conditions for NMR-50. Two different power ramps were chosen to study the effect of startup power density on the flow instability. The experimental startup transient results showed the existence of three different flow instability mechanisms, i.e., flashing instability, condensation induced flow instability, and density wave oscillations. In addition, the void-reactivity feedback did not have significant effects on the flow instability during the startup transients for NMR-50. ii Several initial startup procedures with different power ramp rates were experimentally investigated to eliminate the flow instabilities observed from the startup transients. Particularly, the very slow startup transient and pressurized startup transient tests were performed and compared. It was found that the very slow startup transients by applying very small power density can eliminate the flashing oscillations in the single-phase natural circulation and stabilize the flow oscillations in the phase of net vapor generation. The initially pressurized startup procedure was tested to eliminate the flashing instability during the startup transients as well. The pressurized startup procedure included the initial pressurization, heat-up, and venting process. The startup transient tests showed that the pressurized startup procedure could eliminate the flow instability during the transition from single-phase flow to two-phase flow at low pressure conditions. The experimental results indicated that both startup procedures were applicable to the initial startup of NMR. However, the pressurized startup procedures might be preferred due to short operating hours required. In order to have a deeper understanding of natural circulation flow instability, the quasi-steady tests were performed using the test facility installed with preheater and subcooler. The effect of system pressure, core inlet subcooling, core power density, inlet flow resistance coefficient, and void reactivity feedback were investigated in the quasi-steady state tests. The experimental stability boundaries were determined between unstable and stable flow conditions in the dimensionless stability plane of inlet subcooling number and Zuber number. To predict the stability boundary theoretically, linear stability analysis in the frequency domain was performed at four sections of the natural circulation test loop. The flashing phenomena in the chimney section was considered as an axially uniform heat source. And the dimensionless characteristic equation of the pressure drop perturbation was obtained by considering the void fraction effect and outlet flow resistance in the core section. The theoretical flashing boundary showed some discrepancies with previous experimental data from the quasi-steady state tests. In the future, thermal non-equilibrium was recommended to improve the accuracy of flashing instability boundary. As another part of the funded research, flow instabilities of a PWR-type SMR under low pressure and low power conditions were investigated experimentally as well. The NuScale reactor design was selected as the prototype for the PWR-type SMR. In order to experimentally study the natural circulation behavior of NuScale iii reactor during accidental scenarios, detailed scaling analyses are necessary to ensure that the scaled phenomena could be obtained in a laboratory test facility. The three-level scaling method is used as well to obtain the scaling ratios derived from various non-dimensional numbers. The design of the ideally scaled facility (ISF) was initially accomplished based on these scaling ratios. Then the engineering scaled facility (ESF) was designed and constructed based on the ISF by considering engineering limitations including laboratory space, pipe size, and pipe connections etc. PWR-type SMR experiments were performed in this well-scaled test facility to investigate the potential thermal hydraulic flow instability during the blowdown events, which might occur during the loss of coolant accident (LOCA) and loss of heat sink accident (LOHS) of the prototype PWR-type SMR. Two kinds of experiments, normal blowdown event and cold blowdown event, were experimentally investigated and compared with code predictions. The normal blowdown event was experimentally simulated since an initial condition where the pressure was lower than the designed pressure of the experiment facility, while the code prediction of blowdown started from the normal operation condition. Important thermal hydraulic parameters including reactor pressure vessel (RPV) pressure, containment pressure, local void fraction and temperature, pressure drop and natural circulation flow rate were measured and analyzed during the blowdown event. The pressure and water level transients are similar to the experimental results published by NuScale [51], which proves the capability of current loop in simulating the thermal hydraulic transient of real PWR-type SMR. During the 20000s blowdown experiment, water level in the core was always above the active fuel assemble during the experiment and proved the safety of natural circulation cooling and water recycling design of PWR-type SMR. Besides, pressure, temperature, and water level transient can be accurately predicted by RELAP5 code. However, the oscillations of natural circulation flow rate, water level and pressure drops were observed during the blowdown transients. This kind of flow oscillations are related to the water level and the location upper plenum, which is a path for coolant flow from chimney to steam generator and down comer. In order to investigate the transients start from the opening of ADS valve in both experimental and numerical way, the cold blow-down experiment is conducted. For the cold blowdown event, different from setting both reactor iv pressure vessel (RPV) and containment at high temperature and pressure, only RPV was heated close to the highest designed pressure and then open the ADS valve, same process was predicted using RELAP5 code. By doing cold blowdown experiment, the entire transients from the opening of ADS can be investigated by code and benchmarked with experimental data. Similar flow instability observed in the cold blowdown experiment. The comparison between code prediction and experiment data showed that the RELAP5 code can successfully predict the pressure void fraction and temperature transient during the cold blowdown event with limited error, but numerical instability exists in predicting natural circulation flow rate. Besides, the code is lack of capability in predicting the water level related flow instability observed in experiments.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Response of the Hydrological Cycle in Asian Monsoon Systems to Global Warming Through the Lens of Water Vapor Wave Activity Analysis

Here, the column integrated water vapor (CWV)-based local wave activity (LWA) is adapted to examine the response of the hydrological cycle and extreme of the Asian summer monsoon in CMIP5 simulations under the RCP8.5 forcing scenario. A tight linear relationship between CWV LWA (A + ) and its sink (P$ ~\atop{-}$E + ), which measures the intensity of the local hydrological cycle and extremes, affords a simple scaling framework for the hydrological cycle intensity in terms of the contributions from (i) ratio of moisture participating in the hydrological cycle, (ii) stirring length scale, (iii) background moisture gradient, and (iv) hydrological cycling rate (HCR). Future moisture LWA over the broad Asian monsoon region shows a large increase (~35%), attributable largely to the increase of the background moisture. Laslty, the scaling analysis reveals a distinct mix of the contributing factors for the increase in (P$ ~\atop{-}$E + ) between East Asian and Indian monsoon regions, despite both experiencing sizable increase of (P$ ~\atop{-}$E + ).

54 ENVIRONMENTAL SCIENCES↗

Multilingual Connotation Frames: A Case Study on Social Media for Targeted Sentiment Analysis and Forecast

People around the globe respond to major real world events through social media. To study targeted public sentiments across many languages and geographic locations, we introduce multilingual connotation frames: an extension from English connotation frames of Rashkin et al. (2016) with 10 additional European languages, focusing on the implied sentiments among event participants engaged in a frame. As a case study, we present large scale analysis on targeted public sentiments using 1.2 million multilingual connotation frames extracted from Twitter. We rely on connotation frames to build models to forecast country-specific connotation dynamics – perspective change over time towards salient entities and events. Our results demonstrate that connotation dynamics can be accurately predicted up to half a week in advance.

connotation frames↗

Dynamic domain kinematic modelling for predicting interflow over leaky impeding layers

Traditional Boussinesq or kinematic simulations of interflow (i.e., lateral subsurface flow) assume no leakage through the impeding layer and require a no-flow boundary condition at the ridge top. However, recent analyses of many interflow-producing landscapes indicate that leaky impeding layers are common, that most interflow percolates well before reaching the toe slope, and therefore, the downslope contributing length is shorter than the hillslope length. In watersheds characterised by perched interflow over a low conductivity layer through permeable topsoil, interflow with percolation may be modelled with a kinematic wave model using a mobile upslope boundary condition defining the hillslope portion contributing interflow to valleys. Here, we developed and applied a dynamic interflow model to simulate interflow using a downslope travel distance concept such that only the active contributing length is modelled at any time. The model defines a variable active area based on the depth of the perched layer, the topographic slope and the ratio of the hydraulic conductivity of topsoil to that of the impeding layer. It incorporates a two-layer soil moisture accounting water balance analysis, a pedo-transfer function, and percolation and evaporation routines to predict interflow rates in continuous and event-based scenarios. We tested the modelling concept on two sets of data (2-year dataset of rainfall observations for the continuous simulation and a multi-day irrigation experiment for the event simulation) from a 121-m-long open interflow collection trench on an experimental hillslope at the Savannah River Site, South Carolina. The continuous model simulation partially represented the observed interflow hydrograph and perched water depth in the experimental hillslope with correlation coefficients of 0.85 and 0.35, respectively. Model performance improved significantly at event-scale analysis. The modelling approach realistically represents interflow dynamics in hillslopes with leaky impeding layers and can be integrated into catchment-scale hydrology models for more detailed hillslope process modelling.

54 ENVIRONMENTAL SCIENCES↗

The effects of leaf size and microroughness on the branch-scale collection efficiency of ultrafine particles

In this study, wind tunnel experiments were performed to explore how leaf size and leaf microroughness impact the collection efficiency of ultrafine particles (UFP) at the branch scale. A porous media model previously used to characterize UFP deposition onto conifers (Pinus taeda and Juniperus chinensis) was employed to interpret these wind tunnel measurements for four different broadleaf species (Ilex cornuta, Quercus alba, Magnolia grandiflora, and Lonicera fragrantissima) and three wind speed (0.3–0.9 ms -1 ) conditions. Among the four broadleaf species considered, Ilex cornuta with its partially folded shape and sharp edges was the most efficient at collecting UFP followed by the other three flat-shaped broadleaf species. The findings here suggest that a connection must exist between UFP collection and leaf dimension and roughness. This connection is shown to be primarily due to the thickness of a quasi-laminar boundary layer pinned to the leaf surface assuming the flow over a leaf resembles that of a flat plate. A scaling analysis that utilizes a three-sublayer depositional model for a flat plate of finite size and roughness embedded within the quasi-laminar boundary layer illustrates these connections. The analysis shows that a longer leaf dimension allows for thicker quasi-laminar boundary layers to develop. A thicker quasi-laminar boundary layer depth in turn increases the overall resistance to UFP deposition due to an increase in the diffusional path length thereby reducing the leaf-scale UFP collection efficiency. Finally, it is suggested that the effects of leaf microroughness are less relevant to the UFP collection efficiency than are the leaf dimensions for the four broadleaf species explored here.

54 ENVIRONMENTAL SCIENCES↗

An Idealized Test of the Response of the Community Atmosphere Model to Near‐Grid‐Scale Forcing Across Hydrostatic Resolutions

Abstract A set of idealized experiments are developed using the Community Atmosphere Model (CAM) to understand the vertical velocity response to reductions in forcing scale that is known to occur when the horizontal resolution of the model is increased. The test consists of a set of rising bubble experiments, in which the horizontal radius of the bubble and the model grid spacing are simultaneously reduced. The test is performed with moisture, through incorporating moist physics routines of varying complexity, although convection schemes are not considered. Results confirm that the vertical velocity in CAM is to first‐order, proportional to the inverse of the horizontal forcing scale, which is consistent with a scale analysis of the dry equations of motion. In contrast, experiments in which the coupling time step between the moist physics routines and the dynamical core (i.e., the “physics” time step) are relaxed back to more conventional values results in severely damped vertical motion at high resolution, degrading the scaling. A set of aqua‐planet simulations using different physics time steps are found to be consistent with the results of the idealized experiments.

54 ENVIRONMENTAL SCIENCES↗

Global scenarios of urban density and its impacts on building energy use through 2050

Significance Urban density significantly impacts urban energy use and the quality of life of urban residents. Here, we provide a global-scale analysis of future urban densities and associated energy use in the built environment under different urbanization scenarios. The relative importance of urban density and energy-efficient technologies varies geographically. In developing regions, urban density tends to be the more critical factor in building energy use. Large-scale retrofitting of building stock later rather than sooner results in more energy savings by the middle of the century. Reducing building energy use, improving the local environment, and mitigating climate change can be achieved through systemic efforts that take potential co-benefits and trade-offs of both higher urban density and building energy efficiency into account.

42 ENGINEERING↗

Smoother Surfaces Enhance Diffusion of Nanorods in Entangled Polymer Melts

Coarse-grained molecular dynamics simulations are used to study the diffusion of thin nanorods in entangled polymer melts for varying nanorod length and roughness. While prior studies observed a nanorod parallel diffusion constant scaling inversely with rod length D ∥ ~ l –1 , here, we show that this scaling is not universal and depends sensitively on the nanorod surface roughness. We observe D ∥ ~ l –k , where k < 1 and decreases with decreasing surface roughness. The weaker scaling is driven by the non-Gaussian diffusion of nanorods due to the emergence of an intermittent hopping process that becomes more pronounced with decreasing roughness at the monomer scale. Analysis shows that the mean hop size grows for smoother rods but shows little to no variation with rod length. The mean hopping frequency shows no dependence on either rod length or roughness, suggesting it originates from the polymer melt environment. Further, our results show that the small-scale features of the nanorod surface strongly influence the large-scale and long-time transport of nanorods in polymer matrices, creating new material design opportunities for precisely engineered nanocomposites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Enabling high resolution strain mapping in zirconium alloys

Highlights: • Optimisation of speckle patterns suitable for high resolution digital image correlation in a zirconium alloy • Evidence of distinct strain patterning at the macro and micro scale • Analysis of strain heterogeneity in a neighbouring low and high strain band • Paved the way for future studies on strain localization in zirconium alloys subjected to hydriding and irradiation damage - Abstract: High Resolution Digital Image Correlation (HRDIC) has been established recently as a novel displacement mapping technique during mechanical loading experiments to quantify strain localisation down to the level of individual slip traces. This is achieved by the creation of a nano-scale gold pattern naturally formed during remodelling of a thin gold layer that was sputtered onto the region of interest. To date, the gold remodelling is carried out in a water vapourisation environment, which excludes the technique to be applied to materials that readily form noticeable oxide layers in such environments. The current paper describes a recently developed gold remodelling technique using a styrene-argon environment at substantially lower temperatures than the water-vapour based technique. The material used in the present work is a zirconium alloy where we first demonstrate the problem of oxide formation during remodelling in water vapour and the benefit of the modified remodelling procedure. The error associated with the spatial drift was assessed for different interrogation window sizes followed by detailed analysis of the subsequent strain maps produced using the styrene remodelled patterns after tensile deformation to nominal applied strains of ~3.5% and ~7.0%. The level of detail captured demonstrate the suitability of styrene-argon-based remodelling for materials like Zr alloys with the strain maps showing clear strain patterning on both a transgranular and single grain scale with the possibility of quantifying strain across a single slip trace.

36 MATERIALS SCIENCE↗

Effects of particle shape and surface roughness on van der Waals interactions and coupling to dynamics in nanocrystals

The van der Waals interaction between colloids and nanoparticles is one of the key components to understanding particle aggregation, attachment, and assembly. While the ubiquity of anisotropic particle shapes and surface roughness is well-recognized in nanocrystalline materials, the effect of both on van der Waals forces and torques has not been adequately investigated. Here, in this study, we develop a numerical scheme and determine the van der Waals forces and torques between cubic particles with multiple configurations and relative orientations. Our results show that the van der Waals torque due to anisotropic particle shapes is appreciable at nearly all configurations and mutual angles, outcompeting Brownian motion for various materials systems and conditions. The effect of surface roughness increases this shape effect, resulting in stronger van der Waals interactions ascribed to protrusions in the rough surfaces. Moreover, a scaling analysis indicates that the surface roughness alters the separation dependence of the van der Waals force and, more importantly, significantly influences the dynamics of two approaching particles. Our results clearly demonstrate that surface roughness and anisotropic shape play a crucial role in the energetics and kinetics of various particle-scale and emergent phenomena, such as crystal growth by oriented attachment, nanomaterials synthesis and assembly, mud flow rheology, as well as the deposition of natural nanocrystals within the subsurface.

Arbitrary configurations↗

Dynamic Thermal Performance Analysis of PCM Products Used for Energy Efficiency and Internal Climate Control in Buildings

PCMs are attractive for the future generation of buildings, where energy efficiency targets and thermal comfort expectations are increasingly prioritized. Experimental analysis of local thermal processes in these dynamic components and whole-building energy consumption predictions are essential for the proper implementation of PCMs in buildings. This paper discusses the experimental analysis of the thermophysical characteristics of both a latent heat storage material (PCM) and a product containing this PCM. The prototype product under investigation is a panelized PCM technology containing inorganic, salt-hydrate-based PCM. The thermal analysis includes studies of melting and freezing temperatures, enthalpy changes during phase change processes, nucleation intensity, sub-cooling effects, and PCM stability. The PCM’s stability is also investigated, as is the ability of PCM products to control local temperatures and peak load transmission times. Two inorganic PCM formulations based on calcium chloride hexahydrate (CaCl 2 .6H 2 O) were prepared and tested in laboratory conditions. Material-scale testing results were compared with outcomes from the system-scale analysis, using both laboratory test methods as well as field exposure in test huts. This work demonstrates that PCM technologies used in buildings can effectively control both the magnitude of thermal storage capacity as well as the time of the peak thermal load. It was found that commonly used material-scale testing methods may not always be beneficial in assessing the dynamic thermal performance characteristics of building technologies containing PCMs.

42 ENGINEERING↗

Northern Hemisphere Blocking in ~25-km-Resolution E3SM v0.3 Atmosphere-Land Simulations

The fidelity of a prerelease Energy Exascale Earth System Model (E3SM) in reproducing atmospheric blocking is evaluated with ~100- and ~25-km horizontal resolution within ensembles of simulations with Atmospheric Modeling Intercomparison Protocol-type active atmosphere and land surface configurations. Here this evaluation is conducted via a hybrid bidimensional blocking index based on geopotential height. The lower-resolution model correctly reproduces the spatial distribution of blocking frequency maxima over the Northern Hemisphere. However, it overestimates the blocking frequency over western North America, the Pacific Northeast, and Eastern Europe regions and largely underestimates blocking frequency over the North Atlantic. The high-resolution model significantly reduces the bias over the North Pacific region, particularly over western North America, but the biases over the North Atlantic blocking sector mostly persist. A diagnosis of the mean flow reveals that the subtropical jet is displaced poleward in the high-resolution model with a jet core speed that is generally more realistic. A time scale analysis of eddies suggests that synoptic eddies associated with the blocking events are increased in the high-resolution configuration. The discrepancy between the models implies that both synoptic and low-frequency eddies play significant roles in determining North Pacific blocking, whereas North Atlantic blocking is mainly driven by low-frequency eddies. The characteristic time scale associated with blocking events is also investigated, and it shows that both model resolutions produce events that are overly persistent. However, the bias in the high-resolution model is reduced, which reflects more efficient energy dispersion with higher resolution.

54 ENVIRONMENTAL SCIENCES↗