Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sample entropy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Quasar Identification Using Multivariate Probability Density Estimated from Nonparametric Conditional Probabilities

Nonparametric estimation for a probability density function that describes multivariate data has typically been addressed by kernel density estimation (KDE). A novel density estimator recently developed by Farmer and Jacobs offers an alternative high-throughput automated approach to univariate nonparametric density estimation based on maximum entropy and order statistics, improving accuracy over univariate KDE. This article presents an extension of the single variable case to multiple variables. The univariate estimator is used to recursively calculate a product array of one-dimensional conditional probabilities. In combination with interpolation methods, a complete joint probability density estimate is generated for multiple variables. Good accuracy and speed performance in synthetic data are demonstrated by a numerical study using known distributions over a range of sample sizes from 100 to 10 6 for two to six variables. Performance in terms of speed and accuracy is compared to KDE. The multivariate density estimate developed here tends to perform better as the number of samples and/or variables increases. As an example application, measurements are analyzed over five filters of photometric data from the Sloan Digital Sky Survey Data Release 17. The multivariate estimation is used to form the basis for a binary classifier that distinguishes quasars from galaxies and stars with up to 94% accuracy.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Nucleation rate controlled grain boundary and lattice creep

Nucleation versus diffusion rate-limited bicrystal and single crystal creep exhibit different scaling dependencies that enable the mechanisms to be isolated when measured as a function of sample size. It has recently been suggested that nucleation rate-limited kinetic models generally describe the non-Newtonian portion of the creep response well, but more direct evidence is required. This work analyzes the grain boundary creep response of UO 2 , a pyrochlore high entropy oxide, silver, and palladium, along with the lattice creep of silver using small-scale in situ loading in the transmission electron microscope. At small sizes, each system exhibits scale dependence associated with nucleation rate-limited kinetics. Fits of the data produce activation volumes on the order of a few Burgers vectors cubed with positive temperature coefficients as expected for nucleation kinetics. The activation enthalpies fall in the range of about 0.4 eV to 1.7 eV, being lower for the metals and higher for the oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Logical quantum processor based on reconfigurable atom arrays

Suppressing errors is the central challenge for useful quantum computing, requiring quantum error correction (QEC) for large-scale processing. However, the overhead in the realization of error-corrected ‘logical’ qubits, in which information is encoded across many physical qubits for redundancy, poses substantial challenges to large-scale logical quantum computing. Here we report the realization of a programmable quantum processor based on encoded logical qubits operating with up to 280 physical qubits. Using logical-level control and a zoned architecture in reconfigurable neutral-atom arrays, our system combines high two-qubit gate fidelities, arbitrary connectivity, as well as fully programmable single-qubit rotations and mid-circuit readout. Operating this logical processor with various types of encoding, we demonstrate improvement of a two-qubit logic gate by scaling surface-code distance from d = 3 to d = 7, preparation of colour-code qubits with break-even fidelities, fault-tolerant creation of logical Greenberger–Horne–Zeilinger (GHZ) states and feedforward entanglement teleportation, as well as operation of 40 colour-code qubits. Finally, using 3D [[8,3,2]] code blocks, we realize computationally complex sampling circuits with up to 48 logical qubits entangled with hypercube connectivity with 228 logical two-qubit gates and 48 logical CCZ gates. We find that this logical encoding substantially improves algorithmic performance with error detection, outperforming physical-qubit fidelities at both cross-entropy benchmarking and quantum simulations of fast scrambling. These results herald the advent of early error-corrected quantum computation and chart a path towards large-scale logical processors.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Neutrino-driven Outflows and the Elemental Abundance Patterns of Very Metal-poor Stars

Abstract The elemental abundances between strontium and silver ( Z = 38–47) observed in the atmospheres of very metal-poor stars in the Galaxy may contain the fingerprint of the weak r -process and ν p -process occurring in early core-collapse supernovae explosions. In this work, we combine various astrophysical conditions based on a steady-state model to cover the richness of the supernova ejecta in terms of entropy, expansion timescale, and electron fraction. The calculated abundances based on different combinations of conditions are compared with stellar observations, with the aim of constraining supernova ejecta conditions. We find that some conditions of the neutrino-driven outflows consistently reproduce the observed abundances of our sample. In addition, from the successful combinations, the neutron-rich trajectories better reproduce the observed abundances of Sr–Zr ( Z = 38–40), while the proton-rich ones, Mo–Pd ( Z = 42–47).

Astronomy & Astrophysics↗
DOE OSTI2021

Exceptionally high spallation strength for a high-entropy alloy demonstrated by experiments and simulations

High-entropy alloys are materials with an increasing number of technological applications. Amongst them, the Cantor alloy, FeMnCoCrNi, shows desirable mechanical properties at normal loading conditions. In this study we focus on the performance of the Cantor alloy at the ultra-high deformation rates of shock waves. We study shock-induced spallation using both experiments and atomistic simulations. Experimental loading is achieved using high power laser, with VISAR to obtain velocity profiles and spall strength, followed by transmission electron microscopy of the recovered samples. Molecular Dynamics (MD) simulations of shock-induced spallation are compared with experiments. Both experiments and simulations show a high spall strength which would be beneficial for certain applications, with experiments giving ~8 GPa at ~10 7 s -1 and MD giving almost ~30 GPa at ~10 9 s -1 . The difference between experiments and simulations can be explained by the difference in strain rate. Post-mortem analysis of the experimental samples shows nanotwins near the spall plane, while MD simulations show a highly disordered region giving rise to void nucleation and spall during loading.

36 MATERIALS SCIENCE↗
DOE OSTI2022

High-Entropy Borides under Extreme Environment of Pressures and Temperatures

The high-entropy transition metal borides containing a random distribution of five or more constituent metallic elements offer novel opportunities in designing materials that show crystalline phase stability, high strength, and thermal oxidation resistance under extreme conditions. We present a comprehensive theoretical and experimental investigation of prototypical high-entropy boride (HEB) materials such as (Hf, Mo, Nb, Ta, Ti)B2 and (Hf, Mo, Nb, Ta, Zr)B2 under extreme environments of pressures and temperatures. The theoretical tools include modeling elastic properties by special quasi-random structures that predict a bulk modulus of 288 GPa and a shear modulus of 215 GPa at ambient conditions. HEB samples were synthesized under high pressures and high temperatures and studied to 9.5 GPa and 2273 K in a large-volume pressure cell. The thermal equation of state measurement yielded a bulk modulus of 276 GPa, in excellent agreement with theory. The measured compressive yield strength by radial X-ray diffraction technique in a diamond anvil cell was 28 GPa at a pressure of 65 GPa, which is a significant fraction of the shear modulus at high pressures. The high compressive strength and phase stability of this material under high pressures and high temperatures make it an ideal candidate for application as a structural material in nuclear and aerospace fields.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Development of a Laser Ultrasonics-based Approach for Rapid Screening of High Entropy Alloys

This project utilized a laser ultrasonic technique to systematically study temperature-induced evolution of material properties in a set of interrelated binary alloys and a high entropy alloy (HEA) fabricated using arc-melting and spark plasma sintering processes. This technique involved the use of a nanosecond duration, high-intensity pulsed laser to thermo-elastically generate ultrasonic waves that propagate in the bulk of the metal alloy. Sub-nanometer-scale displacements associated with the propagating bulk ultrasonic waves were detected along the epicenter on the opposite surface of the sample using a 1 GHz bandwidth photorefractive interferometer. Phase transformations and microstructural changes were inferred from the temperature-dependent trends in the bulk acoustic velocities and features in the ultrasonic epicentral waveforms measured in the binary alloys. These inferences were then correlated with electron/optical microscopy observations and predictions using calculations of phase diagrams (CALPHAD). The results showed that the laser-generated ultrasonic pulses were strongly influenced by changes in material microstructure and could accurately track thermally driven phase transformations and detect the presence of microscale heterogeneities (grain boundaries, dendritic structures, etc.) in the set of binary alloy samples. The measurement approach was then applied to a quinary HEA sample for estimating phase transition temperature and determining microstructural heterogeneity. The rapid, non-contact and non-destructive ultrasonic testing approach demonstrated here is amenable to high throughput combinatorial investigations that can be applied to graded composition HEAs produced using advanced manufacturing methods. When paired with atomistic simulations and CALPHAD modeling, this approach can overcome the bottlenecks faced by current material characterization methods in efficiently screening the vast discovery space of HEAs that spans over a hundred million unique quinary alloy compositions.

36 MATERIALS SCIENCE↗
DOE OSTI2015

MORFOMETRYKA—A NEW WAY OF ESTABLISHING MORPHOLOGICAL CLASSIFICATION OF GALAXIES

We present an extended morphometric system to automatically classify galaxies from astronomical images. The new system includes the original and modified versions of the CASGM coefficients (Concentration C{sub 1}, Asymmetry A{sub 3}, and Smoothness S{sub 3}), and the new parameters entropy, H, and spirality σ{sub ψ}. The new parameters A{sub 3}, S{sub 3}, and H are better to discriminate galaxy classes than A{sub 1}, S{sub 1}, and G, respectively. The new parameter σ{sub ψ} captures the amount of non-radial pattern on the image and is almost linearly dependent on T-type. Using a sample of spiral and elliptical galaxies from the Galaxy Zoo project as a training set, we employed the Linear Discriminant Analysis (LDA) technique to classify EFIGI (Baillard et al. 4458 galaxies), Nair and Abraham (14,123 galaxies), and SDSS Legacy (779,235 galaxies) samples. The cross-validation test shows that we can achieve an accuracy of more than 90% with our classification scheme. Therefore, we are able to define a plane in the morphometric parameter space that separates the elliptical and spiral classes with a mismatch between classes smaller than 10%. We use the distance to this plane as a morphometric index (M{sub i}) and we show that it follows the human based T-type index very closely. We calculate morphometric index M{sub i} for ∼780k galaxies from SDSS Legacy Survey–DR7. We discuss how M{sub i} correlates with stellar population parameters obtained using the spectra available from SDSS–DR7.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Dynamic properties of FeCrMnNi, a High Entropy Alloy

The goal of this paper was to assess the dynamic properties of a new class of materials, High entropy alloys (HEAs). Specifically, gas gun experiments coupled with recovery were performed on a specific HEA, FeCrMnNi, to measure its equation of state (EOS) and its spall strength, which is a measure of the stress required to nucleate voids under shock loading conditions. While there has been a plethora of work performed to assess the mechanical properties of these HEAs under uniaxial stress conditions as a function of strain rate, investigation of its properties in dynamic extremes remains rare. The current work fills this gap in knowledge for this novel class of materials. Our results show that the measured EOS for this material at one velocity was in reasonable agreement with an estimated Hugoniot. Furthermore, while the spall strength for this material was found to be ~1.9 GPa, with some variation based on sample location, the main failure mode wasbrittle. This brittle failure leading to formation of cracks in the material is different than the ductile failure observed in pure iron and its alloys. DOE/NV/03624--1298

36 MATERIALS SCIENCE↗
DOE OSTI2022

Deep-learning-based workflow for boundary and small target segmentation in digital rock images using UNet++ and IK-EBM

We report three-dimensional (3D) X-ray micro-computed tomography (μCT) has been widely used in petroleum engineering because it can provide detailed pore structural information for a reservoir rock, which can be imported into a pore-scale numerical model to simulate the transport and distribution of multiple fluids in the pore space. The partial volume blurring (PVB) problem is a major challenge in segmenting raw μCT images of rock samples, which impacts boundaries and small targets near the resolution limit. We developed a deep-learning (DL)-based workflow for accurate and fast partial volume segmentation. The DL model's performance depends primarily on the training data quality and model architecture. This study employed the entropy-based-masking indicator kriging (IK-EBM) to segment 3D Berea sandstone images as training datasets. The comparison between IK-EBM and manual segmentation using a 3D synthetic sphere pack, which had a known ground truth, showed that IK-EBM had higher accuracy on partial volume segmentation. We then trained and tested the UNet++ model, a state-of-the-art supervised encoder-decoder model, for binary (i.e., void and solid) and four-class segmentation. We compared the UNet++ with the commonly used U-Net and wide U-Net models and showed that the UNet++ had the best performance in terms of pixel-wise and physics-based evaluation metrics. Specifically, boundary-scaled accuracy demonstrated that the UNet++ architecture outperformed the regular U-Net architecture in the segmentation of pixels near boundaries and small targets, which were subjected to the PVB effect. Feature map visualization illustrated that the UNet++ bridged the semantic gaps between the feature maps extracted at different depths of the network, thereby enabling faster convergence and more accurate extraction of fine-scale features. The developed workflow significantly enhances the performance of supervised encoder-decoder models in partial volume segmentation, which has extensive applications in fundamental studies of subsurface energy, water, and environmental systems.

02 PETROLEUM↗
DOE OSTI2023

Thickness dependent OER electrocatalysis of epitaxial thin film of high entropy oxide

High entropy oxides (HEOs), which contain multiple elements in the same crystallographic site, are a promising platform for electrocatalysis in oxygen evolution reaction (OER). Investigating these materials in epitaxial thin film form expands the possibility of tuning OER activity by several means, which are not realizable in polycrystalline samples. To date, very few such studies have been reported. In this work, the OER activity of single-crystalline thin films of (La 0.2 Pr 0.2 Nd 0.2 Sm 0.2 Eu 0.2 )NiO 3 , grown on NdGaO 3 substrates have been investigated in 0.1 M KOH electrolyte as a function of film thickness. The OER activity increases with the thickness of the film. X-ray absorption spectroscopy measurements find an increase in Ni $d$-O $p$ covalency and a decrease in charge transfer energy with the increase in film thickness. These facilitate higher charge transfer between Ni and surface adsorbates, increasing OER activity. However, the OER process leads to excessive leaching of thicker films and the OER activity of a 75 unit cell thick film is found to be optimal in the present study. In conclusion, this work demonstrates that the thickness of perovskite oxides can be used as a parameter to enhance OER activity.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Synthesis and Ultrahigh Pressure Compression of High-Entropy Boride (Hf0.2Mo0.2Nb0.2Ta0.2Zr0.2)B2 to 220 GPa

The high-entropy boride (Hf0.2Mo0.2Nb0.2Ta0.2Zr0.2)B2 material was synthesized under high-pressures and high-temperatures in a large-volume Paris-Edinburgh (PE) press from a ball-milled powder mix of HfO2, MoO3, Nb2O5, Ta2O5, ZrO2, carbon black, and boron carbide. The transformation process was monitored in situ by energy-dispersive x-ray diffraction with conversion starting at 1100 °C and completed by 2000 °C with the formation of a single hexagonal AlB2-type phase. The synthesized sample was recovered, powdered, and mixed with platinum pressure marker and studied under high pressure by angle-dispersive x-ray diffraction in a diamond anvil cell. The hexagonal AlB2-type phase of (Hf0.2Mo0.2Nb0.2Ta0.2Zr0.2)B2 was found to be stable up to the highest pressure of 220 GPa reached in this study (volume compression V/V0 = 0.70). The third order Birch-Murnaghan equation of state fit to the high-pressure data up to 220 GPa results in an ambient pressure unit cell volume V0=28.16±0.04 Å3, bulk modulusKo = 407 ± 6 GPa, pressure derivative of bulk-modulus K0′ = 2.73 ± 0.045 GPa. Our study indicates that this high-entropy boride (Hf0.2Mo0.2Nb0.2Ta0.2Zr0.2)B2 material is stable to ultrahigh pressures and temperatures and exhibit high bulk modulus similar to other incompressible transition metal borides like ReB2 and Os2B3.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Effect of Cold Deformation and Heat Treatment on the Microstructure and Mechanical Behavior of High Entropy Alloy CuCrFeNi{sub 2}Al{sub 0.5}

CuCrFeNi{sub 2}Al{sub 0.5}, a high entropy alloy (HEA) with a single FCC phase, was deformed at room temperature and then heat treated. The small particles precipitated from the deformed FCC solid solution matrix after heating at 700 °C, softening the solid solution matrix. This outcome confirms that the microstructure of HEAs can be controlled by heat treatment in addition to controlling the chemical composition and the rate of cooling from liquid alloys. The hardness of the samples increased due to precipitation hardening, and the specimen heated at 700 °C with 10% predeformation had the highest hardness. As the predeformation increases, the precipitates tend to interweave in the network morphology. Meanwhile, grains in all specimens became more severely coarse after heat treatment at 1100 °C. Predeformation followed by annealing can obviously slow down the creep rate, indicating that annealing at an appropriate temperature can improve the mechanical properties of deformed HEA.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Magnetic and magnetocaloric properties of La{sub 0.85}(Na{sub 1−x}K{sub x}){sub 0.15}MnO{sub 3} ceramics produced by reactive spark plasma sintering

La{sub 0.85}(Na{sub 1−x}K{sub x}){sub 0.15}MnO{sub 3} (0 ≤ x ≤ 1) ceramics were synthesized from the raw La(OH){sub 3}, NaOH, KOH, and MnO{sub 2} powders using Reactive Spark Plasma Sintering. All the compounds were obtained as pure, dense, and ultrafine grained pellets. The Rietveld refinement of the X-Ray powder diffraction shows that all our synthesized samples are single phase and crystallize in the distorted rhombohedral system with R-3c space group. The thermal variation of their magnetization under a magnetic applied field of 50 mT shows a paramagnetic to ferromagnetic transition at a Curie temperature very close to room temperature. The magnetic entropy change, deduced from magnetization measurements versus magnetic applied field up to 5 T at several temperatures exhibits a maximum |ΔS{sub M}|{sub max} which slightly increases with increasing K content. The relative cooling power values, inferred from the |ΔS{sub M}| vs T peak broadening, vary slightly with the potassium content, reaching, values between 316 and 289 Jkg{sup −1}, in an applied magnetic field of 5 T, when x increases from 0 to 1. Technically, these large values make the prepared materials very promising for domestic magnetic refrigeration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Ettringite hysteresis under sorption from molecular simulations

Highlights: • Hybrid Grand Canonical Monte Carlo (GCMC) and Molecular Dynamics (MD) simulations are performed. • Anisotropic large strain coefficient of crystal shrinkage of ettringite is provided. • Entropy increases when ettringite converts into metaettringite. • Sorption-induced stress may lead to columns collapse upon drying. • H-bonds involving OH groups in columns play a role in hysteresis. The response of ettringite under sorption is critical for the utilization of this mineral as an energy storage material and to understand the concrete durability problems associated with ettringite formation. We report molecular simulations directly sampling the osmotic ensemble to understand the sorption processes and structural changes in ettringite-metaettringite transition. Desorption branch and sorption-induced volume changes from simulations agree with the experiments. The structural changes at low relative humidity are analyzed, revealing for the first time details of metaettringite structure. The reversibility under sorption observed experimentally is captured by simulation in the ettringite domain. The reversibility in the conversion of metaettringite into ettringite is not captured by the direct simulations in the osmotic ensemble due to the large volume changes associated with ettringite desorption. Finally, we discuss the role of hydrogen bonds on the hysteresis in ettringite.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Sample dependence of giant magnetocaloric effect in a cluster-glass system Ho{sub 5}Pd{sub 2}

In order to investigate the effect of vacancy on the magnetocaloric effect in Ho{sub 5}Pd{sub 2}, we have carried out X-ray diffraction, magnetization, and specific heat measurements in the rare-earth intermetallic compound Ho{sub 5+x}Pd{sub 2}(−0.4 ≤ x ≤ 0.4). The maximum magnetic entropy change −ΔS{sub m}{sup max}, the maximum adiabatic temperature change ΔT{sub ad}{sup max}, and the relative cooling power of Ho{sub 5+x}Pd{sub 2} take large values at x = 0−0.4 for the field change of 5 T. The paramagnetic Curie temperature θ{sub p} increases with an increase of x. This fact suggests that the enhancement of ferromagnetic coupling among the correlated spins leads to the increase of magnetocaloric effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Outstanding radiation resistance of tungsten-based high-entropy alloys

A body-centered cubic W-based refractory high entropy alloy with outstanding radiation resistance has been developed. The alloy was grown as thin films showing a bimodal grain size distribution in the nanocrystalline and ultrafine regimes and a unique 4-nm lamella-like structure revealed by atom probe tomography (APT). Transmission electron microscopy (TEM) and x-ray diffraction show certain black spots appearing after thermal annealing at elevated temperatures. TEM and APT analysis correlated the black spots with second-phase particles rich in Cr and V. No sign of irradiation-created dislocation loops, even after 8 dpa, was observed. Furthermore, nanomechanical testing shows a large hardness of 14 GPa in the as-deposited samples, with near negligible irradiation hardening. Theoretical modeling combining ab initio and Monte Carlo techniques predicts the formation of Cr- and V-rich second-phase particles and points at equal mobilities of point defects as the origin of the exceptional radiation tolerance.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Toward Automated Sampling of Polymorph Nucleation and Free Energies with the SGOOP and Metadynamics

Understanding the driving forces behind the nucleation of different polymorphs is of great importance for material sciences and the pharmaceutical industry. This includes understanding the reaction coordinate that governs the nucleation process and correctly calculating the relative free energies of different polymorphs. Here, we demonstrate, for the prototypical case of urea nucleation from the melt, how one can learn such a one-dimensional reaction coordinate as a function of prespecified order parameters and use it to perform efficient biased all-atom molecular dynamics simulations. The reaction coordinate is learnt as a function of the generic thermodynamic and structural order parameters using the “spectral gap optimization of order parameters (SGOOP)” approach [Tiwary, P. and Berne, B. J. Proc. Natl. Acad. Sci. U.S.A. (2016)] and is biased using well-tempered metadynamics simulations. The reaction coordinate gives insights into the role played by different structural and thermodynamics order parameters, and the biased simulations obtain accurate relative free energies for different polymorphs. This includes an accurate prediction of the approximate pressure at which urea undergoes a phase transition and one of the metastable polymorphs becomes the most stable conformation. Here, we believe the ideas demonstrated in this work will facilitate efficient sampling of nucleation in complex, generic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗