Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SOLIDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Flash Kα radiography of laser-driven solid sphere compression for fast ignition

Time-resolved compression of a laser-driven solid deuterated plastic sphere with a cone was measured with flash Kα x-ray radiography. A spherically converging shockwave launched by nanosecond GEKKO XII beams was used for compression while a flash of 4.51 keV Ti Kα x-ray backlighter was produced by a high-intensity, picosecond laser LFEX (Laser for Fast ignition EXperiment) near peak compression for radiography. Areal densities of the compressed core were inferred from two-dimensional backlit x-ray images recorded with a narrow-band spherical crystal imager. The maximum areal density in the experiment was estimated to be 87 ± 26 mg/cm{sup 2}. The temporal evolution of the experimental and simulated areal densities with a 2-D radiation-hydrodynamics code is in good agreement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Crystallization growth rates and front propagation in amorphous solid water films

The growth rate of crystalline ice (CI) in amorphous solid water (ASW) films was investigated using reflection absorption infrared spectroscopy. Two different experiments were set up to measure rates of the crystallization front propagation from the underlying crystalline template upward and from the vacuum interface downward. In one set of experiments, layers of ASW (5% D 2 O in H 2 O) were grown on a CI template and capped with a decane layer. In isothermal experiments from 140 to 150 K, crystallization was observed from the onset (no induction time) and the extent of crystallization increased linearly with time. In a second set of experiments, uncapped ASW films without a CI template were studied. The films were created by placing a 100 ML isotopic layer (5% D 2 O in H 2 O) at various positions in a 1000 ML ASW (H 2 O) film. The CI growth rates obtained from the two configurations (capped films with a CI template and uncapped films without a CI template) are in quantitative agreement. The results support the idea that for ASW films in a vacuum, a crystalline layer forms at the surface that then acts as a CI template for a growth front that moves downward into the film.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

High-Pressure Apparatus for Monitoring Solid–Liquid Phase Transitions

This work presents a new technique for observing the solid–liquid phase transformations in complex diesel fuel blends and diesel surrogates under high-pressure conditions intended to simulate those occurring in vehicle fuel injectors. A high-pressure apparatus based on a visual identification of freezing and thawing has been designed and built to monitor phase behavior and determine the crystallization temperature of complex fuels to predict wax precipitation. The proposed methodology was validated using pure substances—n-hexadecane (C16H34), cyclohexane (C6H12), and a binary cyclohexane/n-hexadecane mixture—all of which have been well-characterized previously. The crystallization temperatures of these compounds were measured from atmospheric pressure to 400 MPa for temperatures varying from 290 to 363 K and compared to those reported in the literature. The standard error of the estimated temperatures, based on a given pressure, between the experimental data obtained in this work was compared to data in the literature from Domanska et al. This methodology is being extended to investigate the properties of more complex fuel mixtures.

High-Pressure, phase change, diesel, solidificatio↗
DOE OSTI2025

Magnetism in EuAlSi and the Eu 1−𝑥 ⁢Sr 𝑥 ⁢ AlSi solid solution solid solution

The magnetic properties of EuAlSi, a compound comprising a honeycomb lattice of Al/Si atoms and a triangular lattice of Eu atoms, are presented. By means of single-crystal x-ray diffraction, we find that EuAlSi crystallizes in an AlB 2 -type structure with space group 𝑃⁢6/mmm and unit cell parameters 𝑎 = 4.2229⁢ (10) ⁢Å and 𝑐 = 4.5268 ⁢(12)⁢ Å. Our magnetic measurements indicate that EuAlSi is a soft ferromagnetic material with 𝑇 Curie = 25.8 K. The susceptibility follows the Curie-Weiss law at high temperatures, which allowed us to determine the paramagnetic Curie temperature 𝜃 𝑃 = 36.2 ⁢(1) ⁢K and an effective magnetic moment 𝜇 eff = 8.07 ⁢(1)⁢ µ 𝐵 /Eu. This value is in agreement with the theoretical value of 7.9 µ 𝐵 for Eu 2+ free ion. Moreover, we have prepared the Eu 1−𝑥 ⁢Sr 𝑥 ⁢ AlSi solid solution, where the atoms in the triangular lattice were systematically exchanged, in order to study the evolution of the collective quantum properties from the ferromagnetic EuAlSi toward the superconducting SrAlSi. Across the Eu 1−𝑥 ⁢Sr 𝑥 AlSi solid solution, the unit cell parameters change linearly, following Vegard’s law, and making the system reliable for studying composition dependence of the interplay between the crystal structure and physical properties. As the Sr content increases, i.e., 𝑥 increases, we note a consistent reduction of 𝜇 eff and 𝑇 Curie . Long-range magnetic order in Eu 1−𝑥 ⁢Sr 𝑥 ⁢ AlSi persists up to 𝑥 = 0.95, whereas superconductivity is only observed for samples with 𝑥 > 0.97.

Walicka, Dorota I. [University of Geneva (Switzerl↗
DOE OSTI2019

Electrochemical-Reaction-Driven Interfacial Stress in a Solid-Solid Layered Architecture

Reaction-driven interfacial growth causes significant strain in layered architectures accompanied by mass transfer and moving boundaries. We present an analytical construct of the stress generated in a multilayer film, which incorporates the elastic-plastic strain of the growth layer, which suggests its strong dependence on the mechanical properties and thickness. This analytical formalism is further applied to a layered all-solid-state lithium battery architecture. This study demonstrates that mechanical stability can be enhanced by using a positive electrode material with high stiffness, porous hosts for lithium plating, and small external elastic constraints to buffer the volumetric changes in the electrode material. Furthermore, our results also reveal that small surface flaws in the solid electrolyte and high internal hydrostatic pressure can alleviate lithium dendrite growth through surface cracks.

25 ENERGY STORAGE↗
DOE OSTI2022

Adversarial autoencoder ensemble for fast and probabilistic reconstructions of few-shot photon correlation functions for solid-state quantum emitters

Second-order photon correlation measurements [g (2) (τ) functions] are widely used to classify single-photon emission purity in quantum emitters or to measure the multiexciton quantum yield of emitters that can simultaneously host multiple excitations – such as quantum dots – by evaluating the value of g (2) (τ = 0). Accumulating enough photons to accurately calculate this value is time consuming and could be accelerated by fitting of few-shot photon correlations. Here, we develop an uncertainty-aware, deep adversarial autoencoder ensemble (AAE) that reconstructs noise-free g (2) (τ) functions from noise-dominated, few-shot inputs. The model is trained with simulated g (2) (τ) functions that are facilely generated by Poisson sampling time bins. The AAE reconstructions are performed orders-of-magnitude faster, with reconstruction errors and estimates of g (2) (τ = 0) that are lower in variance and similar in accuracy compared to Maximum likelihood estimation and Levenberg-Marquardt least-squares fitting approaches, for simulated and experimentally measured few-shot g (2) (τ) functions (~100 two-photon events) of InP/ZnS/ZnSe and CdS/CdSe/CdS quantum dots. The deep-ensemble model comprises eight individual autoencoders, allowing for probabilistic reconstructions of noise-free g (2) (τ) functions, and we show that the predicted variance scales inversely with number of shots, with comparable uncertainties to computationally intensive Markov chain Monte Carlo sampling. Furthermore, this work demonstrates the advantage of machine learning models to perform uncertainty-aware, fast, and accurate reconstructions of simple Poisson-distributed photon correlation functions, allowing for on-the-fly reconstructions and accelerated materials characterization of solid-state quantum emitters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Magic high-order harmonics from a quasi-one-dimensional hexagonal solid

High-order harmonic generation (HHG) from atoms is a coherent light source that opens up attosecond physics, but it is the application of HHG to solids that has brought much excitement in the last decade. Here in this paper we report a special kind of harmonics in a quasi-one-dimensional and hexagonal barium titanium sulfide: Under circularly polarized laser excitation, harmonics are generated only at first, fifth, seventh, and eleventh orders. These magic harmonics appear only with circularly polarized light, not with linearly polarized light. Neither cubic nor tetragonal cells have magic harmonics even with circularly polarized light. Through a careful group-theory analysis, we find that two subgroups of symmetry operations unique to the hexagonal symmetry cancel out third and ninth harmonics. This feature presents a rare opportunity to develop HHG into a crystal-structure characterization tool for phase transitions between hexagonal and nonhexagonal structures.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Lattice Instability during Solid-Solid Structural Transformations under a General Applied Stress Tensor: Example of Si I → Si II with Metallization

Here, the density functional theory was employed to study the stress-strain behavior and elastic instabilities during the solid-solid phase transformation (PT) when subjected to a general stress tensor, as exemplified for semiconducting Si I and metallic Si II, where metallization precedes the PT, so stressed Si I can be a metal. The hydrostatic PT occurs at 76 GPa, while under uniaxial loading it is 11 GPa (3.7 GPa mean pressure), 21 times lower. The Si I→Si II PT is described by a critical value of the phase-field’s modified transformation work, and the PT criterion has only two parameters given six independent stress elements. Our findings reveal novel, more practical synthesis routes for new or known high-pressure phases under predictable nonhydrostatic loading, where competition of instabilities can serve for phase selection rather than free energy minima used for equilibrium processing.

42 ENGINEERING↗
DOE OSTI2020

Direct observations of shock-induced melting in a porous solid using time-resolved x-ray diffraction

Here in this work we provide direct evidence of shock-induced melting and associated kinetics in a porous solid (aluminum powder) using time-resolved x-ray diffraction. Unambiguous evidence of melting in 50% porous aluminum (Al) powder samples, shocked to peak pressures between ~13 - 19 GPa, was provided by the broadening of the Debye-Scherrer ring corresponding to the (111) peak. Shocked Al powder did not melt completely in any of our experiments within the durations of measurement. Incomplete (partial) melting of the powder, even after several hundreds of nanoseconds of shock loading, provides insights into thermal transport with Al powder particles under high-pressure dynamic loading. Such insights are quite valuable for developing well-constrained melting models and thermodynamic equations of state for porous Al and other porous solids relevant to planetary and materials science.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Derived crystal structure of martensitic materials by solid–solid phase transformation

A mathematical description of crystal structure is proposed consisting of two parts: the underlying translational periodicity and the distinct atomic positions up to the symmetry operations in the unit cell, consistent with the International Tables for Crystallography. By the Cauchy–Born hypothesis, such a description can be integrated with the theory of continuum mechanics to calculate a derived crystal structure produced by solid–solid phase transformation. In addition, the expressions for the orientation relationship between the parent lattice and the derived lattice are generalized. Additionally, the derived structure rationalizes the lattice parameters and the general equivalent atomic positions that assist the indexing process of X-ray diffraction analysis for low-symmetry martensitic materials undergoing phase transformation. The analysis is demonstrated in a CuAlMn shape memory alloy. From its austenite phase (L2 1 face-centered cubic structure), it is identified that the derived martensitic structure has orthorhombic symmetry Pmmn with the derived lattice parameters a d = 4.36491, b d = 5.40865 and c d = 4.2402 Å, by which the complicated X-ray Laue diffraction pattern can be well indexed, and the orientation relationship can be verified.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Velocity Profiling of a Gas–Solid Fluidized Bed Using Electrical Capacitance Volume Tomography

In this study, a method of producing velocity profile maps from electrical capacitance volume tomography (ECVT) measurements by reconstructing displacement from measured changes in capacitance is developed and applied to fluidized bed systems. The mapping of the reconstruction leverages the gradient of the sensitivity distribution of the ECVT sensor to circumvent the need for image cross correlation techniques. Experimental data of both bubbling and slugging fluidized beds are collected in a cold flow model. Adaptation of the technique is discussed in detail, and velocity profiles are obtained for a range of gas flow rates. The produced velocity maps are compared against the established methods of cross correlation and against empirical correlations from the literature and are found to agree well in tracking slug and bubble velocity. The exception is when the tracked object is large relative to the ECVT sensor dimensions, a scenario that can be avoided through proper sensor design. The quantities of average velocity, momentum, and solid and gas volume fraction are derived from the image and velocity profiles. The results demonstrate and extend the power of ECVT as a measurement tool for the study and monitoring of gas–solid fluidized beds by providing a computationally cheaper alternative to 3-D cross correlation for deriving velocity profiles.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Thermal, mechanical, and electrical properties of LSCo/mullite composite contact materials for solid oxide fuel cells

Lanthanum strontium cobaltite (LSCo) is considered as a good candidate cathode contact material for solid oxide fuel cells, due to high electrical conductivity. However, LSCo has a very large coefficient of thermal expansion (CTE) than the cells and metallic interconnects. As a result, poor mechanical stability is expected during thermal cycling. To minimize the CTE mismatch, we investigate a composite approach involving mixing LSCo with an inert material of low CTE, such as mullite at volume fractions from 0.1 to 0.4. Composite’s CTE shows a decreasing trend with increasing mullite volume fractions, and is consistent with model predictions. X-ray powder diffraction analysis of sintered LSCo/mullite composites exhibits no presence of other phases for samples aged for 500h at 800oC, indicating chemical compatibility. Electrical conductivity by a 4-pt method shows a decreasing trend with increasing mullite content. Contact strength of as-sintered and thermally cycled samples show that only the composite with 0.4 volume fraction has a measurable strength; the other composites have no strength. Overall, the composite approach is demonstrated in the LSCo/mullite system to lower the CTE and hence achieve thermal cycle stability. The addition of the inert phase to the LSCo matrix; however, also reduces the electrical conductivity.

Contact materials, LSCo, mullite, CTE, electrical ↗
DOE OSTI2014

Measurements of spin observables in pseudo-scalar meson photo-production using polarized neutrons in solid HD

A measurement of psuedo-scalar meson photo production from longitudinally polarized solid HD has been carried out with the CLAS at Thomas Jefferson National Accelerator Facility (Jlab) with circularly and linearly polarized photon beams. Its aim is to measure a complete set of spin observables for the neutron simultaneously from the same experiment. As a polarized neutron, deutron in HD was used. Preliminary asymmetries are shown for the π{sup −} channel.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Siloxane Deposition on the Ni-YSZ Solid Oxide Fuel Cell Anode Exposed to Bio-Syngas

Siloxane, a common contaminant present in biogas, is known for adverse effects on cogeneration prime movers. In this study, the siloxane deposition products and mechanism in the solid oxide fuel cell nickel-yttria stabilized zirconia (Ni-YSZ) anode are investigated analytically and experimentally. An SOFC with Ni-YSZ anode and pure Ni/YSZ pellets were exposed to a simulated biogas-reformate fuel with octamethylcyclotetrasiloxane (D4) contamination at 750 °C. The electrochemical characterization results show that the SOFCs performance degradation caused by D4 contamination is irreversible. Morphology and XRD results illustrate that silicon and carbon deposition can both be detected in the anode and pellets. Graphite, SiC and SiO2 are all possible products based on the results of XRD test. Here, according to the formation of graphite and SiC, the new mechanism suggests that carbon is also an essential factor in siloxane contamination of Ni-YSZ anodes besides silicon, which can be explained by the catalytic and electrochemical analysis.

25 ENERGY STORAGE↗
DOE OSTI2024

Succinonitrile-Lithium Salt Complexes as Solid Catholytes for LLZO-Based Solid-State Batteries

The thermal and electrochemical properties of several succinonitrile (SN)-based organic ionic plastic crystals (OIPCs) containing lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), lithium bis(oxalate) borate (LiBOB) or mixtures of the two salts, were investigated with the goal of determining which is most promising for use as a catholyte in solid-state lithium batteries. The best combination of properties for this use was found for the mixture containing 3 mol% LiTFSI and 2 mol% LiBOB in SN. Based on these observations, several solid-state cells containing Al-substituted Li 7 La 3 Zr 2 O 12 separators with composite cathodes consisting of LiNi 0.33 Mn 0.33 Co 0.33 O 2 (NMC111), carbon black, and the succinonitrile-salt mixtures were assembled and cycled at room temperature, without exogenous pressure, using a simple design.

25 ENERGY STORAGE↗