Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Negative thermal expansion and the role of hybridization in perovskite-type PbTiO 3 -Bi(Cu 0.5 Ti 0.5) O 3

PbTiO 3 -BiMeO 3 ferroelectrics have attracted much attention due to not only their extremely large polarization and piezoelectricity but also their controllable thermal expansion. In this study, we present a new binary system of (1 - x)PbTiO 3 -xBi(Cu 0.5 Ti 0.5 )O 3 possessing large tetragonality and enhanced spontaneous polarization. Interestingly, a combination of near zero thermal expansion and negative thermal expansion over a temperature range of RT to T C (~550 °C) has been observed in tetragonal 0.85PbTiO 3 -0.15Bi(Cu 0.5 Ti 0.5 )O 3 . The comprehensive structure analysis addressed that the abnormal thermal expansion is coupled to the spontaneous volume ferroelectrostriction. Moreover, the chemical bonding investigation by a maximum entropy method further attests that the covalent hybridization of Pb/Bi–O bonds plays a vital role in the improved ferroelectricity and interacts with thermal vibration to dominate the crossover from positive to negative thermal expansion. fINALLY, The present studies would give direct evidence to verify the theoretical calculations and could be extended to reveal the nature of thermal expansion in ferroelectrics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

High pressure chemical reactivity and structural study of the Na–P and Li–P systems

In this work, the Na–P and Li–P chemical systems were studied under pressure using synchrotron X-ray diffraction in a diamond anvil cell up to 20 GPa, combined with the AIRSS ab initio random structure searching technique. The results reveal an enhanced reactivity of both alkali metals with phosphorous at slightly elevated pressures. This enables the synthesis of Li 3 P and Na 3 P at room temperature (RT) starting from element precursors, bypassing the established chemical synthesis methods. Both compounds undergo a pressure-induced phase transition from the hexagonal Na 3 As-type structure (stable at ambient conditions) towards a Fm m (FCC) structure that remains stable up to 20 GPa. Attempts to synthesize compounds with higher alkali metal content (such as Li 5 P) using high-temperature and -pressure conditions (up to 2000+ K and 30 GPa), inspired by recent theoretical predictions, were not successful.

25 ENERGY STORAGE↗
DOE OSTI2026

Evolution of size-selected Pt cluster catalysts on prototypical oxide supports

The current quest for new pathways into sustainable, efficient and durable energy conversion technologies makes the used for a fundamental understanding of the atomic-scale phenomena underlying catalytic processes ever more pressing. In this context, characterizing catalyst particles in situ provides valuable information about the evolution of their composition, structure, oxidation state and charge state during an ongoing process. To disentangle the influence of individual parameters – temperature, pressure, gas composition, cluster size, as well as support acidity, redox state and defect density – it is crucial to control them precisely and separately in experiments. At the example of size-selected Pt n clusters – i.e. sub-nm particles defined to the exact number of atoms – on flat oxide supports, we follow their rich evolution phenomena via (synchrotron-based) X-ray photoelectron spectroscopy (XPS) and scanning tunnelling microscopy (STM) during temperature ramps and in various gas environments. Here, we present our experience with these highly defined, yet complicated-to-create samples in ultra-high vacuum (UHV) and at mbar pressures. We discuss their stability during transport to synchrotrons and under reaction conditions on three prototypical oxide supports and show the various phenomena that can be disentangled. Ptn clusters on the non-reducible silicon dioxide, SiO 2 , remain size-selected and show remarkable stability. Doping strongly influences the size-dependent binding energy shifts and changes the Pt response to oxidative and reaction conditions, which we attribute to different cluster geometries: p-type doping leads to wetting, enhanced sinter resistance and a diminished response to oxidative environments, compared to clusters on n-type doped samples. We compare the system with our previous findings of a similar change in dimensionality for Pt 20 clusters on the reducible ceria, CeO 2 (111), support, induced by modulation of its O vacancy density. The Pt n /CeO 2 system is particularly interesting for strategies to stabilize and redisperse Pt clusters dynamically. Finally, we study the evolution of Pt n clusters on another reducible oxide support, magnetite, Fe 3 O 4 (001), in 0.1 mbar alternating redox conditions at RT and elevated temperature. In analogy to findings previously reported for Pt/TiO 2 (110), the clusters either become encapsulated by a thin oxide film via strong metal–support interaction (SMSI) or deeply buried in the magnetite. Overall, our approach of following the evolution of size-selected clusters on oxide supports leads to fundamental atomic-scale insights on nano-scale catalyst materials, on our path to sustainable, dynamic and self-repairing catalysts.

Falling, Lorenz J. [Technical Univ. of Munich (Ger↗
DOE OSTI2023

Fluid dynamic mathematical aspects of supernova remnants

Supernovae—explosions of stars—are a central problem in astrophysics since they contain information on the entire process of stellar evolution and nucleosynthesis. Rayleigh–Taylor (RT) and Richtmyer–Meshkov (RM) instabilities, developing during the supernova blast, lead to intense interfacial RT/RM mixing of the star's materials and couple astrophysical to atomic scales. This work analyzes some fluid dynamic mathematical aspects of the titanic task of supernova's blast. We handle mathematical challenges of RT/RM dynamics in supernova relevant conditions by directly linking the conservation laws governing RT/RM dynamics to symmetry-based momentum model, by exactly deriving the model parameters in the scale-dependent and scale-invariant regimes, and by exploring the special self-similar class for RT/RM interfacial mixing with variable accelerations. Here we reveal that RT/RM dynamics is strongly influenced by deterministic (the initial and the flow) conditions in the scale-dependent linear and nonlinear regimes and in the self-similar mixing regime. The theory outcomes are consistent with the observations of supernova remnants, explain the results of the scaled laboratory experiments in high energy density plasmas, and yield the design of future experiments for the accurate quantification of RT/RM dynamics in supernova relevant conditions. We find that from fluid dynamic mathematical perspectives, supernovae can be regarded as an astrophysical initial value problem. Along with the guidance of what explodes at microscopic scales, supernova remnants encapsulate information on the explosion hydrodynamics and the associated deterministic conditions at macroscopic scales. We urge such effects be considered in interpretations of the observational data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Guiding center equations for the magnetic dipole

Since the discovery of Van Allen radiation belts in the 1960s, observations of energetic ions trapped in the Earth's dipole magnetic field have illustrated the remarkable confinement properties of this configuration. As such, it has been used for confining a hot plasma for nuclear fusion studies, starting from the pioneering work of Bo Lehnert and Akira Hasegawa, in the Levitated Dipole Experiment (LDX) at MIT until 2011 and in the RT-1 experiment at the University of Tokyo. More recently, the dipole has been subject to a renewed interest for fusion studies by a couple of startups and for smaller applications as a cold plasma source. While the equilibrium and magneto-hydrodynamic stability of the dipole have been investigated quite in detail, neoclassical properties of the dipole are comparatively much less known: the dipole is more known in geophysics than in fusion science. For this reason, in this paper, we propose a set of Hamiltonian, guiding-center equations to describe the motion of electrons and ions in a magnetic dipole configuration. We also developed a code, and we show the main features of particle motion, benchmarking our results with the analytical solutions for the bounce and precession motion, which are well documented in the literature. We also draw some general conclusions for the neoclassical transport in usual toroidal confinement schemes, such as the tokamak and the stellarator, pointing out the unique advantages of the dipole in confining energetic particles.

Hamiltonian mechanics↗
DOE OSTI2026

Impact of nitrogen and oxygen interstitials on niobium SRF cavity performance

Superconducting radio frequency (SRF) cavities are the leading technology for highly efficient particle acceleration, and their performance can be significantly enhanced through the controlled introduction of interstitial impurities into bulk niobium. Nitrogen doping has demonstrated a substantial reduction in surface resistance, which improves the quality factor of the cavities. More recently, oxygen doping has emerged as a promising alternative, demonstrating comparable reductions in surface resistance. In this study, we combine cavity measurements on 1.3 GHz niobium SRF cavities subjected to a range of nitrogen- and oxygen-based treatments with material characterizations performed on cavity cutouts processed under identical conditions. This approach allows us to quantitatively assess the contribution of each impurity to the reduction of surface resistance. We find that nitrogen is ten times more effective than oxygen in reducing surface resistance at 16 MV/m. We also observe an additive effect of O and N impurities in reducing RT. We discuss these results in the context of field-dependent nonequilibrium superconductivity, gap enhancement, and hydrogen trapping mechanisms.

Hu, H. [Chicago U.; Fermilab] (ORCID:0009000330621↗
DOE OSTI2022

Multiple spillovers from humans and onward transmission of SARS-CoV-2 in white-tailed deer

Many animal species are susceptible to severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection and could act as reservoirs; however, transmission in free-living animals has not been documented. White-tailed deer, the predominant cervid in North America, are susceptible to SARS-CoV-2 infection, and experimentally infected fawns can transmit the virus. To test the hypothesis that SARS-CoV-2 is circulating in deer, 283 retropharyngeal lymph node (RPLN) samples collected from 151 free-living and 132 captive deer in Iowa from April 2020 through January of 2021 were assayed for the presence of SARS-CoV-2 RNA. Ninety-four of the 283 (33.2%) deer samples were positive for SARS-CoV-2 RNA as assessed by RT-PCR. Notably, following the November 2020 peak of human cases in Iowa, and coinciding with the onset of winter and the peak deer hunting season, SARS-CoV-2 RNA was detected in 80 of 97 (82.5%) RPLN samples collected over a 7-wk period. Whole genome sequencing of all 94 positive RPLN samples identified 12 SARS-CoV-2 lineages, with B.1.2 (n = 51; 54.5%) and B.1.311 (n = 19; 20%) accounting for ~75% of all samples. The geographic distribution and nesting of clusters of deer and human lineages strongly suggest multiple human-to-deer transmission events followed by subsequent deer-to-deer spread. These discoveries have important implications for the long-term persistence of the SARS-CoV-2 pandemic. Our findings highlight an urgent need for a robust and proactive “One Health” approach to obtain enhanced understanding of the ecology, molecular evolution, and dissemination of SARS-CoV-2.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

LAMP Diagnostics at the Point-of-Care: Emerging Trends and Perspectives for the Developer Community

Over the past decade, loop-mediated isothermal amplification (LAMP) technology has played an important role in molecular diagnostics. Amongst numerous nucleic acid amplification assays, LAMP stands out in terms of sample-to-answer time, sensitivity, specificity, cost, robustness, and accessibility, making it ideal for field-deployable diagnostics in resource-limited regions. In this review, we outline the front-end LAMP design practices for point-of-care (POC) applications, including sample handling and various signal readout methodologies. Next, we explore existing LAMP technologies that have been validated with clinical samples in the field. We summarize recent work that utilizes reverse transcription (RT) LAMP to rapidly detect SARS-CoV-2 as an alternative to standard PCR protocols. Finally, we describe challenges in translating LAMP from the benchtop to the field and opportunities for future LAMP assay development and performance reporting. Despite the popularity of LAMP in the academic research community and a recent surge in interest in LAMP due to the COVID-19 pandemic, there are numerous areas for improvement in the fundamental understanding of LAMP, which are needed to elevate the field of LAMP assay development and characterization.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Mechanistic aspects of plasma-enhanced catalytic methane decomposition by time-resolved operando diffuse reflectance infrared Fourier transform spectroscopy

To study mechanistic aspects of plasma-enhanced catalysis, methane is decomposed by a supported Ni catalyst assisted by an Ar/O 2 atmospheric pressure plasma jet (APPJ). Here, the time-resolved surface response of the Ni catalyst is investigated by operando diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) using various experimental settings. Catalyst temperatures of room temperature (RT) and 500 °C and nozzle-catalyst surface distances of 3, 5 and 8 mm were examined, and the amount of O 2 of the Ar/O 2 gas mixture flowing through the APPJ was either 0 or 0.5%. A synergistic effect of surface bonded C-O was observed during the exposure of the Ni catalyst to the APPJ for low oxygen operating conditions (pure Ar jet). Surface bonded C-O formed only when there was plasma present and the C-O signal was enhanced for higher catalyst temperature. When the supported Ni catalyst was subjected to the plasma-generated particle fluxes using highly oxidizing conditions, the presence of surface bonded C-O was suppressed. The plasma-catalytic CO and CO 2 production in the gas phase measured downstream mirrored the surface behavior of C-O bonds when the plasma source operating condition was changed from a low oxygen portion to a high oxygen portion at high catalyst temperature (500 °C). CH n (n =1, 2, ) species on the catalyst surface were also studied by DRIFTS, and CHn destruction was found to correlate with C-O formation. In particular, the time-resolved CH n response showed a possible conversion process of CH n to C-O when the Ni catalyst was exposed to the plasma source. This finding may indicate a plasma-mediated regeneration of the catalyst by plasma-catalyst surface interactions.

42 ENGINEERING↗
DOE OSTI2021

Surface structure of mass-selected niobium oxide nanoclusters on Au(111)

The structures formed by the deposition of mass-selected niobium oxide clusters, Nb 3 O y ( y = 5, 6, 7), onto Au(111) were studied by scanning tunneling microscopy. The as-deposited Nb 3 O 7 clusters assemble into large dendritic structures that grow on the terraces as well as extend from the top and bottom of step edges. The Nb 3 O 6 cluster also forms dendritic assemblies but they are generally much smaller in size. The assemblies are composed of smaller discrete structures (<1 nm) which are likely to be single clusters. Furthermore, the dendritic assemblies for both the Nb 3 O 7 and Nb 3 O 6 clusters have fractal dimensions of about 1.7 which is very close to that expected for simple diffusion limited aggregation. Annealing the Nb 3 O 7,6 /Au(111) surfaces up to 550 K results in changes in assembly sizes and increases in heights, while heating to 700 results in the disruption of the assemblies into smaller structures. By contrast, the as-deposited Nb 3 O 5 /Au(111) surface at RT exhibits compact cluster structures which become 3D nanoparticles when annealed above 550 K. Differences in the observed surface structures and thermal stability are attributed to differences in metal-oxygen stoichiometry which can influence cluster binding energies, mobility and inter-cluster interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Model-based real-time surface heat flux and temperature estimation for the DIII-D tokamak

A control-oriented model for monitoring of wall power flux densities on the DIII-D tokamak has been successfully implemented and validated experimentally. Future reactors will have to withstand severe steady state high heat flux loads on plasma-facing components (PFCs). Due to the difficulty of directly-measuring local heat fluxes on these components, monitoring and protection of PFCs during the plasma discharge can benefit from simplified physics-based real-time (RT) functional models to estimate and guide heat load control. As a first step into the development, a control-oriented model for monitoring of wall power flux densities and temperatures on DIII-D tokamak has been successfully implemented. The paper discusses the experimental demonstration and comparison of the 2-D model-based wall heat flux algorithm on the DIII-Dinner wall limiter (IWL) against infra-red camera heat flux measurements for limited plasma configurations. The paper also reports on the benchmarking of the field line tracing environment, SMITER, developed at ITER organization on DIII-D tokamak against experimental IR diagnostic data and the derivation of the component shaping weighting factors for the 2-D model-based approach. Here, the extension of the model-based approach for surface temperature estimation on the DIII-D IWL is also presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

1.2 Mfps standalone X-ray detector for Time-Resolved Experiments

We present a standalone and autonomous X-ray detector capable of operation with the speed of up to1.2Mfps. The detector utilizes UFXC32k hybrid pixel detectors for sensing X-rays, Spartan-6 LX45 FPGA placed in commercially available sbRIO 9628 controller for data acquisition and processing including a compression with zero-suppression algorithm. A Linux-RT system working on the 400 MHz Dual-Core CPU is used for FPGA control and data streaming to the higher-level system over 1 Gbps Ethernet connection. 1.2 M frames per second is achieved in so-called burst mode of operation while in zerodead-time mode 70 kfps is possible. Due to efficient data compression in FPGA there’s no need of using high-speed transceivers and Frame-Grabber cards on the data server side and the detector can stream the data infinitely over standard 1 Gbps network connection. Operation modes were tested at Advanced Photon Source Synchrotron at Argonne National Laboratory.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Benchmarking SARS CoV-2 Infection in the Workplace to Support Continuity of Operations

Objective: The COVID-19 pandemic jeopardizes continuity of operations of workplaces and the health and safety of workers. Exemplar workplace-related SARS-CoV-2 benchmarks are described and illustrated with empirical data. Methods: Benchmarks were collected over a 9-month period on a large workplace (N = 5500+). These ranged from quantitative indices associated with RT-qPCR targeted testing and random surveillance screening, surveillance for new variants of SARS-CoV-2, intensive contact tracing, case management, return to work procedures, to monitoring of antibody seropositive status. Results: Data and analyses substantiated effectiveness of interventions. This was evidenced in suppressed infection rates, rapid case identification and isolation, acceptance of the program by employees, documentation of presumptive immunity, and working relationships with senior management. Conclusions: These SARS-CoV-2 exemplar benchmarks provided an evidence-base for practice and contributed strategically to organizational decisions.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2026

Dynamics of ballistic photocurrents driven by Coulomb scattering in a two-dimensional material

First-principles real-time time-dependent density-functional theory (rt-TDDFT) calculations reveal the existence of ballistic photocurrents generated by Coulomb scattering, which has not previously been considered as a mechanism for the bulk photovoltaic effect. With monolayer GeS as an example, it is predicted that ballistic currents can be comparable to shift currents under experimentally accessible conditions.

2-dimensional systems↗
DOE OSTI2020

Microscopic force driving the photoinduced ultrafast phase transition: Time-dependent density functional theory simulations of IrTe 2

Photoinduced phase transitions can have complex and intriguing behaviors more than material ground-state dynamics. Understanding the underlying mechanism can help us to design new ways to manipulate the materials. A variety of mechanisms has been proposed to explain the photoinduced phase transitions of IrTe 2 , but a consensus has yet to be reached. Here, we study the photo-induced phase transitions of IrTe 2 by performing the real-time time-dependent density functional theory (rt-TDDFT) simulations in combination with the occupation constrained DFT method. We reveal that the microscopic driving force for the photo-induced phase transitions arises from the tendency to lower the energy levels occupied by the excited carriers, through the increase or decrease of the associated atomic pair distances, depending on whether the newly occupied states are antibonding or bonding states, respectively. The geometric constraints between different bonds represented by the Poisson ratio can bring together different tendencies from different atomic pairs, thus forming a complex intriguing dynamic picture depending on the intensity of the excitation. Furthermore, we also find that phonons don't play a primary role, but can assist the phase transition. These findings imply that one can control the structural phase transitions by selectively exciting photocarriers into designated atomic states using appropriate photon sources.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Intermediate scattering potential strength in electron-irradiated YBa 2 Cu 3 O 7-δ from London penetration depth measurements

Temperature-dependent London penetration depth, λ(T), of a high quality optimally-doped YBa 2 Cu 3 O 7-δ single crystal was measured using tunnel-diode-resonator technique. Controlled artificial disorder was induced by low-temperature 20 K irradiation by 2.5 MeV electrons at two large doses of 3.8 x 10 19 and 5.3 x 10 19 electrons per cm 2 . The irradiation caused significant suppression of the superconductor's critical temperature, T c , from 94.6 K to 90.0 K, and to 78.7 K, respectively. The low-temperature behavior of λ(T) evolves from a T-linear in pristine state to a T 2 behavior after irradiation, expected for a line-nodal d-wave superconductor. However, the original theory that explained such behavior assumed a unitary limit of the scattering potential, whereas usually in normal metals and semiconductors, Born scattering is sufficient to describe the experiment. To estimate the scattering potential strength, we calculated the superfluid density, ρ s (t = T/T c ) = λ 2 (0)/λ 2 (T), varying the amount and strength of non-magnetic scattering using a self-consistent t-matrix theory. Fitting the obtained curves to a power law, ρ s = 1 - Rt n , and to a polynomial, ρ s = 1 - At - Bt 2 , and comparing the coefficients n in one set and A and B in another with the experimental values, we estimate the phase shift to be around 70 and 65°, respectively. We correlate this result with the evolution of the density of states with nonmagnetic disorder.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Dynamic short-range correlation in photoinduced disorder phase transitions

Ultrafast photoexcitation can induce a nonequilibrium dynamic with electron-lattice interaction, offering an effective way to study photoinduced phase transitions (PIPTs) in solids. The issue that atomic displacements after photoexcitation belong to a coherent change or disordered process has become controversial in the PIPT community. Using real-time, time-dependent density functional theory (rt-TDDFT) simulations, we were able to obtained both the coherent and the disordered PIPTs (dimer dissociation) in IrTe 2 with different electronic occupations. More importantly, we found that in the disordered phase transition there exists a local correlation between different dimers regarding their dissociation status. We define these Ir-Ir dimers directly connected by Te atoms, including intralayer and vertically across the layers, as a group (group I). Other Ir-Ir dimers separated by five Ir atoms from Ir-Ir dimers in group I are divided into another group (group II). The dimers in the same group will dissociate in a correlated fashion; they either all dissociate or all do not dissociate. On the other hand, the dimers in neighboring groups will have an anticorrelation: If the dimers in one group dissociate, the dimers in the neighboring group tend not to be dissociated, and vice versa.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Magnetostriction and temperature dependent Gilbert damping in boron doped Fe 80 ⁢Ga 20 thin films

Magnetic thin films with strong magnetoelastic coupling and low Gilbert damping are key materials for many magnetoelectric devices. Here, we investigated the effects of boron doping concentration on magnetostriction and temperature dependent Gilbert damping in magnetron sputtered (Fe 80 ⁢Ga 20 ) 1−𝑥 ⁢B 𝑥 films. A crystalline to amorphous structural transition was observed for a boron content near 8% and coincided with a decrease in coercivity from 76 Oe to 3 Oe. A 10% doping concentration is optimal for achieving both large magnetostriction of 48.8 ppm and low Gilbert damping of 6×10 −3 . The temperature dependence of the damping shows an increase at low temperatures with a peak around 40 K, and we associate the relative increase Δ⁢𝛼/𝛼 RT with magnetoelastic contributions to the damping, which has a maximum of 55.7% at 8% boron. An increase in the inhomogeneous linewidth broadening was observed in the structural transition regime at about 8% boron concentration. Furthermore, this study suggests that incorporation of glass forming elements, in this case boron, into Fe 80 ⁢Ga 20 is a practical pathway for simultaneously achieving enhanced magnetoelastic coupling and reduced Gilbert damping.

Cryogenics↗