Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REFLECTOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Low-cost self-cleaning reflector coatings for concentrating solar power collectors

One of the most significant maintenance problems and cost associated with CSP solar collectors is the soiling of the first surface of the solar radiation reflectors by the accumulation of sand, dust and other pollutants. According to Solar Power World, “a dust layer of one-seventh of an ounce per square yard decreases solar power conversion by 40 percent. In Arizona, dust is deposited each month at about 4 times that amount.” The optical performance of the CSP collectors is key to achieving low electricity costs, where a 1% increase in reflectance directly leads to a 1% reduction in LCOE. Self-cleaning (anti-soiling) and anti-reflection (AR) first surface reflector coatings are a viable solution to achieving high performance, low maintenance cost CSP electricity generation.

14 SOLAR ENERGY↗

3D Printing Prototypes for a Reflector-Based Broadband Axion Search

This work sought to begin research and development on a horn antenna which can be used to transfer the energy of microwave photons produced by axions in a strong magnetic field to a coaxial cable for measurement. 3D prototypes of pyramidal horn antennas and a parabolic reflector were printed and then coated with conductive spray paint. The S 11 parameter was measured and simulated for both 3D printed horn antenna and the conical horn antenna both with and without the reflector present to determine how much of the radiated power was reflected back. Ultimately, for both the conical and pyramidal antennas, less than one percent of the energy emitted by the antennas was reflected back. When the pyramidal antenna was tilted by about 45 degrees, however, around 30-40 percent of the microwaves emitted by the antennas was reflected back.

43 PARTICLE ACCELERATORS↗

Evaluation of Field-Mapping Data for the MI-Tech MI-506CE-1 Compact-Range Reflector in the Sandia National Laboratories' Facility for Antenna and Radar-cross-section Measurements (FARM)

The compact range, located at the Sandia National Laboratories Facility for Antenna and Radar-cross-section Measurements (FARM), has been upgraded by the addition of a new, larger reflector. The new reflector, an MI Technologies model MI-506CE-1, was installed and tested during August through October of 2013. Extensive field mapping was performed by MI Tech personnel, and that data is presented and examined here. Statistics describing the field quality are provided for the nominal test zone, as well as several reduced-size test zones. Spatial-frequency analysis has been applied to the data, and this process allows a determination of amplitude and direction information associated with unwanted reflected and diffracted field components arriving in the test zone.

42 ENGINEERING↗

Exploring Fabrication of Ultra-low Absorption, Multilayer, Hafnium High Reflectors

Ultra-low absorption, high damage threshold coatings are critical for the advancement of the high power CW laser technologies, and in most cases, are a limiting factor for the output power. Since high power CW laser systems enable extremely high power irradiances, when the light is incident on an HR mirror, part of the energy is absorbed and converted into heat, which can have many detrimental side effects. The worst-case scenarios are optical distortion and laser-induced damage. These optics must operate reliably with irradiances of 100's kW/cm 2 to MW/cm 2 . The highest pulsed laser damage threshold high reflectors are consistently fabricated with hafnia material. However, hafnia is not the material of choice for high power CW laser systems because of very high absorption and scatter properties, factors of >100x higher than tantala-silica, due to its poly crystalline nature. This study focuses on CW laser use applications, where the coatings’ laser damage resistance is largely limited by the inherent absorption of the coating materials. The goal is to study the feasibility of utilizing a “composite” hafnium-silica and a “doped” hafnia-silica target materials to prohibit crystallization. The results from the study were extremely successful. Hafnia high reflectors coatings generated from this study exhibited one micron absorption values of approximately 1 ppm, which are the lowest reported values to date.

36 MATERIALS SCIENCE↗

Delayed Critical Enriched Uranium Metal, 7-in.-diam. Cylinder with Thin Stainless Steel Top and Bottom Reflectors

Three 7 in. diameter highly enriched uranium (HEU; 93.17 wt % 235 U) metal cylinders were assembled on the vertical assembly machine of the Oak Ridge Critical Experiments Facility (ORCEF) with thin stainless steel reflectors (0.5, 1, and 2 in. thick) on the top and bottom. These experiments were performed during January 13–25, 1965, and used seven operational days at ORCEF. Before these experiments, unreflected and unmoderated 7 in. diameter HEU metal cylinders had been assembled to delayed criticality at ORCEF, and the results were benchmarked in HEU-MET-FAST-051. In addition to the critical experiments, the prompt neutron decay constant was measured via the Rossi-α technique, and those results are also presented in this report. To achieve near-delayed-critical systems, 5 × 5 × 0.03125 in. rectangular uranium metal parts were used on top of 7 in. diameter cylinders inside the top reflector. The delayed critical configuration from the three experiments described herein are acceptable for use as criticality safety benchmark experiments for the International Criticality Safety Benchmark Evaluation Program (ICSBEP), coordinated by the Nuclear Energy Agency, once the uncertainty analysis is completed. Based on previous ICSBEP benchmarks with this enriched uranium metal at ORCEF, the uncertainty in $k_{eff}$ is expected to be as low as ±0.0002. The prompt neutron time decay data could be the basis of an International Reactor Physics Evaluation Program benchmark.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Reactivity Accountability Attributed to Reflector Poisons in the High Flux Isotope Reactor

The objective of this study is to develop a methodology to predict the reactivity impact as a function of outage time between cycles of 3He, 6Li, and other poisons in the High Flux Isotope Reactor s (HFIR) beryllium reflector. The reactivity worth at startup of the HFIR has been incorrectly predicted in the past after the reactor has been shut-down for long periods of time. The incorrect prediction was postulated to be due to the erroneous calculation of 3He buildup in the beryllium reflector. It is necessary to develop a better estimate of the start-of-cycle symmetric critical control element positions since if the estimated and actual symmetrical critical control element positions differ by more than $1.55 in reactivity (approximately one-half inch in control element startup position), HFIR is to be shutdown and a technical evaluation is performed to resolve the discrepancy prior to restart. 3He is generated and depleted during operation, but during an outage, the depletion of 3He ceases because it is a stable isotope. 3He is born from the radioactive decay of tritium, and thus the concentration of 3He increases during shutdown. SCALE, specifically the TRITON and CSAS5 control modules including the KENO V.A, COUPLE, and ORIGEN functional modules were utilized in this study. An equation relating the down time (td) to the change in symmetric control element position was generated and validated against measurements for approximately 40 HFIR operating cycles. The newly-derived correlation was shown to improve accuracy of predictions for long periods of down time.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Real World Use Case Evaluation of Radar Retro-reflectors for Autonomous Vehicle Lane Detection Applications

Lane detection plays a critical role in autonomous vehicles for safe and reliable navigation. Lane detection is traditionally accomplished using a camera sensor and computer vision processing. The downside of this traditional technique is that it can be computationally intensive when high quality images at a fast frame rate are used and has reliability issues from occlusion such as, glare, shadows, active road construction, and more. This study addresses these issues by exploring alternative methods for lane detection in specific scenarios caused from road construction-induced lane shift and sun glare. Specifically, a U-Net, a convolutional network used for image segmentation, camera-based lane detection method is compared with a radar-based approach using a new type of sensor previously unused in the autonomous vehicle space: radar retro-reflectors. This evaluation is performed using ground truth data, obtained by measuring the lane positions and transforming them into pixel coordinates. The performance of each method is assessed using the statistical R2 score, indicating the correlation between the detected lane lines and the ground truth. The results show that the U-Net camera-based method exhibits limitations in accurately detecting and aligning the lane lines, particularly in challenging scenarios. However, the radar-based lane detection method demonstrates a strong correlation with the ground truth which implies that the use of this sensor may improve current reliability issues from conventional camera lane detection approach. Furthermore, the study highlights the limitations of the U-Net model for camera lane detection, especially in scenarios with sun glare. This study shows that infrastructure-based radar retro-reflectors can improve autonomous vehicle lane detection reliability. The integration of different sensor modalities and the development of advanced computer vision algorithms are crucial for improving the accuracy, reliability, and energy efficiency of lane detection systems. Addressing these challenges contributes to the advancement of autonomous vehicles and the realization of safer and more efficient transportation systems.

Brown, Nicolas E.↗

Shortened horn-reflector antenna

A shortened horn-reflector antenna overcomes the mechanical disadvantages and complexity of the conventional horn-reflector antenna. The shortened antenna offers broadband performance, economic construction, very low antenna temperature, and excellent pattern performance.

Lantz, P. A.↗

Compensating subreflector for two-reflector antennas: A concept

Segmented subreflector surface of Cassegrainian antenna is distorted and shaped by mechanical means to compensate for loss of figure in main reflector. Number of segments necessary is determined by gravity distortion pattern of main reflector at zenith and at horizon.

Bathker, D. A.↗

Conical-reflector antennas.

The mechanical advantages of a singly curved conical reflector are demonstrated by the experimental test of a furlable 1.83 m conical-Gregorian antenna at 16.33 GHz. The measured gain of 47.5 dB corresponds to a net efficiency of over 57%. A ray-optics analysis of conical-reflector antennas is presented, and data useful in the design of conical antennas are given. The conical-Gregorian antenna, in which a subreflector is used in conjunction with a conventional horn feed, is considered in detail. A physical-optics analysis of the conical-Gregorian antenna is used to investigate diffraction and other effects, and to analytically confirm the high performance of the antenna.

Ludwig, A. C.↗

Alignment apparatus using a laser having a gravitationally sensitive cavity reflector

A description is given of a device for determining a true gravitational vertical. The apparatus is composed of a vertically disposed laser with a gravitationally sensitive lower regeneration reflector. The reflector enables an output beam to be developed only when the optical axis of the laser is disposed normal to the gravitationally sensitive reflective surface. In an alternative embodiment, the devices is combined with a servo system to provide a gravitationally stabilized horizontal platform.

Billman, K. W.↗

Analysis of the first laser echoes obtained on the reflector of Luna 21

The international program of lunar telemetry, which has been in operation for three and one-half years, is intended to supply basic information for study of the lunar motion and the internal physics of the moon and the earth, particularly with reference to movement of the pole and displacements of plates. Laser echoes were obtained on Jan. 23, 1973 from the French reflector placed on the moon by Luna 21. Two series of firings, made with a 3-J laser radiated by the 2.7-m telescope of the McDonald Observatory (Texas) made it possible to identify significant echoes of an intensity comparable to those obtained with the reflector set down by Apollo 15. The path time measurements are compatible with normal coordinates.

Abalakin, V. K.↗

Shaped cassegrain reflector antenna

Design equations are developed to compute the reflector surfaces required to produce uniform illumination on the main reflector of a cassegrain system when the feed pattern is specified. The final equations are somewhat simple and straightforward to solve (using a computer) compared to the ones which exist already in the literature. Step by step procedure for solving the design equations is discussed in detail.

Rao, B. L. J.↗

Reaction formulation for radiation and scattering from plates, corner reflectors and dielectric-coated cylinders

The reaction concept is employed to formulate an integral equation for radiation and scattering from plates, corner reflectors, and dielectric-coated conducting cylinders. The surface-current density on the conducting surface is expanded with subsectional bases. The dielectric layer is modeled with polarization currents radiating in free space. Maxwell's equation and the boundary conditions are employed to express the polarization-current distribution in terms of the surface-current density on the conducting surface. By enforcing reaction tests with an array of electric test sources, the moment method is employed to reduce the integral equation to a matrix equation. Inversion of the matrix equation yields the current distribution, and the scattered field is then obtained by integrating the current distribution. The theory, computer program and numerical results are presented for radiation and scattering from plates, corner reflectors, and dielectric-coated conducting cylinders.

Wang, N. N.↗

Low-current-density LED-pumped Nd:YAG laser using a solid cylindrical reflector

The dynamic behavior of Nd:YAG lasers is theoretically analyzed. In experiments, an array of twenty GaAlAs diodes was used as the pumping light source for a Nd:YAG laser. An index-matching glass half-cylinder was used instead of the conventional hollow metal reflector. The refractive index of the half-cylinder was 1.8, which matched the refractive index of the Nd:YAG rod. A maximum CW output power of 27 mW at a current density of 207 A/sq cm was achieved using this glass half-cylinder, while 6.7 mW were obtained when a hollow metal reflector was used.

Farmer, G. I.↗

Highly efficient antenna system using a corrugated horn and scanning hyperbolic reflector

In a horn-reflector antenna system for producing a spherical aperture phase front, a corrugated conical horn illuminates a section of a hyperbolic reflector to produce a spherical aperture phase front. This front produces a far field beam with low sidelobes and high beam efficiency. The system is insensitive to frequency and polarization changes, and is also insensitive to orientation about the axis of the conical horn for beam scanning.

Green, K. A.↗

Power conservation for reflector antennas with truncated feed patterns

Reflector-antenna calculations using idealised truncated feed patterns can lead to incorrect values of total secondary radiated power. It is demonstrated that this discrepancy is due to the presence of higher-order spherical modes incident on the reflector. When a proper spherical-wave expansion of the incident field is used, in conjunction with the physical-optics technique, to determine the scattered field, the total power of the scattered field will equal the power radiated by the feed.

Rush, W. V. T.↗