Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REFLECTING TELESCOPE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Goniometric and Polarized Imaging Spectroscopic Lab Measurements of Spacecraft Materials

To better characterize the spectral response of common spacecraft materials, the following laboratory measurements are presented to support the Space Situational Awareness community in the analysis of remotely sensed observational data. Of interest is classifying material reflective properties using directional reflectance spectroscopy and spatially resolved polarized imaging spectroscopy, allowing laboratory data to be applicable to ground-based optical telescope observations. The team acquired a typical CubeSat solar panel and a sample of multi-layer insulation (MLI) commonly used on spacecraft for initial measurements. The directional spectral data were collected at the Goniometer of the Rochester Institute of Technology (GRIT) laboratory with a lab and field goniometer incorporating two AnalyticalSpectral Device (ASD) spectrometers, a small Lab sphere integrating sphere also paired with an ASD spectrometer, and a Headwall micro-Hyperspec E-Series imaging spectrometer with an adjustable linear polarizer. The goniometer measures spectral bi-directional reflectance factor (BRF) data over a broad range from 350−2500 nm at 1 nm spacing with 3 nm spectral resolution in the visible and near infrared and 8 nm in the shortwave infrared. With the same spectral capabilities, the integrating sphere measures hemispherical-directional reflectance (HDR) in a 45◦-nadir configuration. The Headwall imager covers a spectral range from 400−1000 nm with 1.6 nm spectral resolution.Our initial BRF measurements show interference effects for both materials typically observed with thin films and high infrared reflectivity. In contrast, the interference effects are not present in the HDR measurements of the MLI likely due to the interference effects being averaged out over the reflecting hemisphere. Spatially resolved polarization ratio maps show variability across the materials due to the varying surface structure. We outline a plan for expanding our analysis to a broader range of materials to characterize their directional reflectance spectroscopy.

Chris H. Lee↗

Altered basaltic glass - A terrestrial analog to the soil of Mars

In order to understand the nature of weathering processes and the formation of clay-like substances on Mars, analogous terrestrial processes and materials have been examined including sideromelane and palagonite. It is shown that palagonite is a good analog to the soil of Mars to the level of precision available from Viking and ground-based telescopic spectral measurements. Points of resemblance between the two materials include bulk chemical composition, particle size, reflectance spectra, and magnetic properties. A mechanism for the formation of Martian soil, based on a palagonite model, is proposed.

Allen, C. C.↗

High spatial resolution 10 micron imaging of IRC + 10216

Precise high-resolution 10-micron images of the carbon star IRC + 10216 have been obtained with a scanned linear array. The low noise and high dynamic range of these images permit deconvolution of the telescope point-spread function, revealing the radial brightness distribution of the circumstellar dust shell: approximate reflection symmetry is found in west-east scans, with a distinct division into two components of diameter about 0.40 and 2.2 arcsec. It is shown that this morphology is consistent with published interferometric data that had cast doubt upon an earlier, idealized two-component model. The observed brightness distribution implies that the circumstellar dust density may deviate substantially from the 1/r squared radial dependence expected for spherically symmetric outflow with constant velocity and constant rate of mass loss.

Bloemhof, E. E.↗

Telescope Would Image X And Gamma Rays

Proposed telescope forms images of sources of gamma rays, hard x rays, and soft x rays. Contains reflecting, grazing-incidence reflectors. Multiple coaxial nested pairs used to form images simultaneously at multiple gamma-ray or hard x-ray energies or enhance collection area at single photon energy. Conceived for use in astrophysical studies in outer space. With modifications, used in terrestrial laboratory vaccum systems to image x or gamma rays from pulsed plasmas.

Hoover, Richard B.↗

Compositions of near-Earth asteroids

Observational studies of near-earth asteroids and development of techniques for determining their composition were continued. The analysis techniques were applied to the spectra of several bodies in preparation for their application of near-earth asteroids. In mid-November 1989, near-IR observations of three near-earth atseroids, 1865 Cerberus, 1989 VA, and 1989 VB, were made. These asteroids were observed in six broadband visual and near-IR filters (0.4 to 2.5 microns), and a few narrowband measurements in the IR were obtained, but the asteroids were too faint to measure beyond 2.5 microns. Simultaneous, high-resolution visual CCD spectra were measured for these objects, but the data were not yet reduced to determine their quality. Narrowband spectra of the Martian satellite Deimos in the 1 to 3 micron spectral region were obtained. Simultaneous with the observing project, laboratory studies of meteorites and meteorite analogs which are used in spectral analysis of the telescopic data are continuing to be performed. Extensive work was performed in developing applications of Hapke reflectance theory to compositional analysis. Hapke theory is an adaptation of radiative reflectance theory to particulate surfaces.

Lebofsky, Larry A.↗

The Spaceguard Survey - Protecting the earth from cosmic impacts

The conclusions of the NASA International Near-Earth-Object Detection Workshop (May 1991-January 1992) are summarized. Near-earth asteroids and short-period comets constitute about 90 percent of potential earth-impacting projectiles. The greatest risk is from those with diameters greater than 1 km. The objective of a near-earth object survey is to find such objects, calculate their long-term orbital trajectories, and identify any that may impact the earth over the next several centuries. There will generally be a period of at least several decades to take corrective action if any potential earth-impactors are found. A region of space extending outward from the earth to approximately the inner edge of the main asteroid belt must be monitored. Detection can be by reflected sunlight or infrared. Though faint, the objects should be readily detectable with ground-based telescopes, and thus there is no need for a more expensive space-based system.

Morrison, David↗

Spectroscopy of Mars form 2.04 to 2.44 micron during the 1993 opposition: Absolute calibration and atmospheric vs mineralogic origin of narrow absorption features

We present moderate-resolution (lambda/delta lambda = 300 to 370) reflectance spectral of Mars from 2.04 to 2.44 microns that were obtained at United Kingdom Infrared Telescope (UKIRT) during the 1993 opposition. Seven narrow absorption features were detected and found to have a Mars origin. By comparison with solar and Mars atmospheric spectra, five of these features were attributed all or in part to Mars atmospheric CO2 or CO (2.052 +/- 0.003, 2.114 +/- 0.002, 2.150 +/- 0.003, 2.331 +/- 0.001, and 2.357 +/- 0.002 microns). Two of the bands (2.331 +/- 0.001 and 2.357 +/- 0.002 micron) appear to have widths and depths that are consistent with additional, nonatmospheric absorptions, although a solar contribution cannot be entirely ruled out. Two other weak bands centered at 2.278 +/- 0.002 and 2.296 +/- 0.002 microns may be at least partially mineralogic in origin. The data provide no conclusive identification of the mineralogy responsible for these absorption features. However, examination of terrestrial spectral libraries and previous mineralogy responsible for these absorption features. However, examination of terrestrial spectral libraires and previous moderate spectral resolution mineral studies indicates that the most likely origin of these features is either (bi)carbonate or (bi)sulfate anions in framework silicates of (Fe, Mg)-OH bonds in sheet silicates. If the bands are caused by phyllosilicate minerals, then an explanation must be found for the extremely narrow widths of the cation-OH features in the Mars spectra as compared to terrestrial minerals.

Bell, James F., III↗

Characterization of the JWST Pathfinder Mirror Dynamics Using the Center of Curvature Optical Assembly (CoCOA)

The JWST (James Webb Space Telescope) Optical Telescope Element (OTE) consists of a 6.6 meter clear aperture, 18-segment primary mirror, all-reflective, three-mirror anastigmat operating at cryogenic temperatures. To verify performance of the primary mirror, a full aperture center of curvature optical null test is performed under cryogenic conditions in Chamber A at NASA Johnson Space Center using an instantaneous phase measuring interferometer. After phasing the mirrors during the JWST Pathfinder testing, the interferometer is utilized to characterize the mirror relative piston and tilt dynamics under different facility configurations. The correlation between the motions seen on detectors at the focal plane and the interferometer validates the use of the interferometer for dynamic investigations. The success of planned test hardware improvements will be characterized by the multi-wavelength interferometer (MWIF) at the Center of Curvature Optical Assembly (CoCOA).

Wells, Conrad↗

Characterization of the JWST Pathfinder Mirror Dynamics Using the Center of Curvature Optical Assembly (CoCOA)

The JWST (James Webb Space Telescope) Optical Telescope Element (OTE) consists of a 6.6 meter clear aperture, 18-segment primary mirror, all-reflective, three-mirror anastigmat operating at cryogenic temperatures. To verify performance of the primary mirror, a full aperture center of curvature optical null test is performed under cryogenic conditions in Chamber A at NASA Johnson Space Center using an instantaneous phase measuring interferometer. After phasing the mirrors during the JWST Pathfinder testing, the interferometer is utilized to characterize the mirror relative piston and tilt dynamics under different facility configurations. The correlation between the motions seen on detectors at the focal plane and the interferometer validates the use of the interferometer for dynamic investigations. The success of planned test hardware improvements will be characterized by the multi-wavelength interferometer (MWIF) at the Center of Curvature Optical Assembly (CoCOA).

Wells, C.↗

Optical Studies of Orbital Debris at GEO Using Two Telescopes

Beginning in March, 2007, optical observations of debris at geosynchronous orbit (GEO) were commenced using two telescopes simultaneously at the Cerro Tololo Inter-American Observatory (CTIO) in Chile. The University of Michigan's 0.6/0.9-m Schmidt telescope MODEST (for Michigan Orbital DEbris Survey Telescope) was used in survey mode to find objects that potentially could be at GEO. Because GEO objects only appear in this telescope's field of view for an average of 5 minutes, a full six-parameter orbit can not be determined. Interrupting the survey for follow-up observations leads to incompleteness in the survey results. Instead, as objects are detected on MODEST, initial predictions assuming a circular orbit are done for where the object will be for the next hour, and the objects are reacquired as quickly as possible on the CTIO 0.9-m telescope. This second telescope then follows-up during the first night and, if possible, over several more nights to obtain the maximum time arc possible, and the best six parameter orbit. Our goal is to obtain an initial orbit for all detected objects fainter than R = 15th in order to estimate the orbital distribution of objects selected on the basis of two observational criteria: magnitude and angular rate. Objects fainter than 15th are largely uncataloged and have a completely different angular rate distribution than brighter objects. Combining the information obtained for both faint and bright objects yields a more complete picture of the debris environment rather than just concentrating on the faint debris. One objective is to estimate what fraction of objects selected on the basis of angular rate are not at GEO. A second objective is to obtain magnitudes and colors in standard astronomical filters (BVRI) for comparison with reflectance spectra of likely spacecraft materials. This paper reports on results from two 14 night runs with both telescopes: in March and November 2007: (1) A significant fraction of objects fainter than R = 15th have eccentric orbits (e > 0.1) (2) Virtually all objects selected on the basis of angular rate are in the GEO and GTO regimes. (3) Calibrated magnitudes and colors in BVRI were obtained for many objects fainter than R = 15th magnitude. This work is supported by NASA's Orbital Debris Program Office, Johnson Space Center, Houston, Texas, USA.

Seitzer, P.↗

Narrow-band spectrophotometry of Ariel, Umbriel, Titania, Oberon, and Triton

The spectral reflectances of Ariel, Umbriel, Titania, Oberon, and Triton were measured in 28 bandpasses between lambda 326 and lambda 976 nm on the night of 28/29 June 1974. These observations were made with the 200-in. Hale telescope and multichannel spectrometer. Bandpasses of 8 nm from lambda 326 to lambda 566 nm and 16 nm from lambda 592 to lambda 976 nm were employed. The spectral reflectances of Ariel, Oberon, and Titania increase from lambda 342 to lambda 534 nm and are relatively flat from lambda 550 to lambda 976 nm. Umbriel's reflectance decreases monotonically with increasing wavelength through the entire range of measured wavelengths. Triton is found to have a constant spectral reflectance.

Johnson, P. E.↗

Characterizing GEO Titan IIIC Transtage Fragmentations using Ground-Based and Telescopic Measurements

In a continued effort to better characterize the geosynchronous orbit (GEO) environment, NASA's Orbital Debris Program Office (ODPO) utilizes various ground-based optical assets to acquire photometric and spectral data of known debris associated with fragmentations in or near GEO. The Titan IIIC Transtage upper stage is known to have fragmented four times. Two of the four fragmentations were in GEO while the Transtage fragmented a third time in GEO transfer orbit. The forth fragmentation occurred in low Earth orbit. To better assess and characterize these fragmentations, the NASA ODPO acquired a Titan Transtage test and display article previously in the custody of the 309th Aerospace Maintenance and Regeneration Group (AMARG) in Tucson, Arizona. After initial inspections at AMARG demonstrated that it was of sufficient fidelity to be of interest, the test article was brought to NASA Johnson Space Center (JSC) to continue material analysis and historical documentation. The Transtage has undergone two separate spectral measurement campaigns to characterize the reflectance spectroscopy of historical aerospace materials. These data have been incorporated into the NASA Spectral Database, with the goal of using telescopic data comparisons for potential material identification. A Light Detection and Ranging (LIDAR) system scan also has been completed and a scale model has been created for use in the Optical Measurement Center (OMC) for photometric analysis of an intact Transtage, including bidirectional reflectance distribution function (BRDF) measurements. An historical overview of the Titan IIIC Transtage, the current analysis that has been done to date, and the future work to be completed in support of characterizing the GEO and near GEO orbital debris environment will be discussed in the subsequent presentation.

Cowardin, Heather↗

Reflection-dominated Nuclear X-Ray Emission in the Early-Type Galaxy ESO 565 G019

We present the discovery of a reflection-dominated active galactic nucleus (AGN) in the early-type radio-quietgalaxy ESO 565G019 with Suzaku and SwiftBurst Alert Telescope. The source X-ray spectrum below 10 keVis characteristic of other Compton-thick (CT) AGNs, clearly showing an inverted continuum and prodigiousfluorescence iron emission above 3 keV. A Compton shoulder to the neutral Fe K line also appears to be present.There is evidence for long-term hard X-ray flux variability that we associate with changes in the intrinsic AGNpower law. More of such reflection-dominated AGNs should be uncovered in the near future with the increasedsensitivity of ongoing and new hard X-ray surveys. ESO 565G019 is hosted in an early-type galaxy whosemorphology has been variously classified as either type E or type S0. Only about 20 bona fide CT-AGNs have been identified in the local universe so far, and all exist in host galaxies with late Hubble types (S0 or later). CT columns of nuclear obscuring gas are uncommon in early-type galaxies in the local universe, so confirmation of the exact morphological class of ESO 565G019 is important. Infrared photometry also shows the presence of largequantities of cool dust in the host, indicative of significant ongoing star formation. ESO 565G019 may be the firstidentified local example of minor-merger-driven CT-AGN growth in an early-type host, or may be the result ofinteraction with its neighboring galaxy ESO 565G018 in a wide pair.

comparison↗

Goniometric and Polarized Imaging Spectroscopic Lab Measurements ofSpacecraft Materials

To better characterize the spectral response of common spacecraft materials, the following laboratory measurements are presented to support the Space Situational Awareness community in the analysis of remotely sensed observational data. Of interest is classifying material reflective properties using spectral bidirectional reflectance distribution function (BRDF) data and spatially resolved polarized imaging spectroscopy, allowing laboratory data to be applicable to ground-based optical telescope observations. The team acquired a typical CubeSat solar panel and a sample of multi-layer insulation commonly used on spacecraft for initial measurements. The data were collected at the Goniometer of the Rochester Institute of Technology (GRIT) laboratory with a field and laboratory goniometer housing two Analytical Spectral Device (ASD) spectrometers and a Headwall micro-Hyperspec E-Series imaging spectrometer with an adjustable linear polarizer. The goniometer provides spectral reflectance over a broad spectral range from 350-2500 nm at 1 nm spacing with 3 nm spectral resolution in the visible and near infrared and 8 nm in the shortwave infrared. The Headwall imager covers a spectral range from 400-1000 nm with 1.6 nm spectral resolution. We present the results from these initial measurements that show highly reflective regions at various locations in the angular domain for both materials. In addition, the solar cell spectra exhibited strong interference effects typically observed with thin films. Our team is pursuing a variety of typical solar cells to assess variations in product type. The spatially resolved polarization ratio maps show variability across the materials due to surface structure and varying material composition. Based on these results, we outline a plan for simulating spectral radiance light curves of the materials in various orbital configurations as they would be measured from ground- based telescopes for a clear observing sky during twilight. The paper will also present a plan for expanding ours of interest to determine if the results presented are unique to these samples and to categorize the spectral response for different material classes.

Chris H. Lee↗

Quantitative Analyses of Planetary Reflectance Spectra

The development of a set of quantitative models to analyze planetary reflectance spectra as a function of microscopic and macroscopic mineral mixtures, particle size, and illumination geometry is considered. The approach has been to simplify more sophisticated algorithms to include the smallest number of parameters possible, consistent with being able to use them to produce useful results. This means that they should be able to model the data to within the accuracy obtainable by laboratory, telescopic, and space instrumentation (roughly 1%). The algorithms are ideally given in terms of parameters that are directly measureable (such as spectral reflectance or particle size).

Johnson, P. E.↗

An infrared foreoptics adaptor for the Learjet Telescope

A foreoptics adapter has been built for the Learjet telescope which permits simultaneous viewing of the visible star field in the image plane and acquisition of astronomical data at infrared wavelengths (less than 1 micrometer). The device uses an adjustable dichroic beamsplitter to transmit visible wavelengths to an eyepiece (or television camera), and to reflect infrared wavelengths to a port where an infrared detector system can be mounted. The instrument is intended as a multiple user facility for the Learjet telescope. This report describes the adapter and its use.

Erickson, E. F.↗

Properties of the Hermean Regolith: New Optical Reflectance Spectra, Comparison with Lunar Anorthosites and Mineralogical Modelling - 5

We present new optical (0.4-0.65 micron) spectra of Mercury and lunar pure anorthosite locations, obtained quasi-simultaneously with the Nordic Optical Telescope (NOT) in 2002. A comparative study is performed with the model of Lucey et al. between iron-poor, mature, pure anorthosite (less than 90% plagioclase feldspar) Clementine spectra from the lunar farside and a combined 0.4-1.0 micron mercurian spectrum, obtained with the NOT, calculated for standard photometric geometry. Mercury is located at more extreme locations in the Lucey ratio-reflectance diagrams than any known lunar soil, specifically with respect to the extremely iron-poor mature anorthosites. Though quantitative prediction of FeO and TiO2 abundances cannot be made without a more generally applicable model, we find qualitatively that the abundances of both these oxides must be near zero for Mercury. We utilize the theory of Hapke, with realistic photometric parameters, to model laboratory spectra of matured mineral powders and lunar soils, and remotely sensed spectra of lunar anorthosites and Mercury. An important difference between fabricated and natural powders is the high value for the internal scattering parameter necessary to interpret the spectra for the former, and the requirement of rough and non-isotropically scattering surfaces in the modelling of the latter. The mature lunar anorthosite spectra were well modelled with binary mixtures of calcic feldspars and olivines, grain sizes of 25-30 micron and a concentration of submicroscopic metallic iron (SMFe) of 0.12-0.15% in grain coatings. The mercurian spectrum is not possible to interpret from terrestrial mineral powder spectra without introducing an average particle scattering function for the bulk soil that increases in backscattering efficiency with wavelength. The observed spectrum is somewhat better predicted with binary mixture models of feldspars and pyroxenes, that single-component regoliths consisting of either albite or diopside. Correct spectral reflectance values were predicted with a concentration of 0.1 wt% SMFe in coatings of 15-30 micron sized grains. Since reasonable cosmogonical formation scenarios for Mercury, or meteoritic infall, predict iron concentrations at least this high, we draw the conclusion that the average grain size of Mercury is about a factor of two smaller than for average returned lunar soil samples. The 0.6-2.5 micron spectrum of McCord and Clark is used to further limit the possible range of mineralogical composition of Mercury. It is found that an intimately mixed and matured 3 : 1 labradorite-to-enstatite regolith composition best matches both the optical and near-infrared spectra, yielding an abundance of approx. 1.2 wt% FeO and -approx. 0 wt% TiO2.

Warell, J.↗

Exo-C: A Space Mission for Direct Imaging and Spectroscopy of Extrasolar Planetary Systems

Exo-C is NASAs first community study of a modest aperture space telescope designed for high contrast observations of exoplanetary systems. The mission will be capable of taking optical spectra of nearby exoplanets in reflected light, discovering previously undetected planets, and imaging structure in a large sample of circumstellar disks. It will obtain unique science results on planets down to super-Earth sizes and serve as a technology pathfinder toward an eventual flagship-class mission to find and characterize habitable Earth-like exoplanets. We present the mission/payload design and highlight steps to reduce mission cost/risk relative to previous mission concepts. Key elements are an unobscured telescope aperture, an internal coronagraph with deformable mirrors for precise wavefront control, and an orbit and observatory design chosen for high thermal stability. Exo-C has a similar telescope aperture, orbit, lifetime, and spacecraft bus requirements to the highly successful Kepler mission (which is our cost reference). The needed technology development is on-course for a possible mission start in 2017. This paper summarizes the study final report completed in January 2015. During 2015 NASA will make a decision on its potential development.

high contrast observations↗