Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Spin transitions in La{sub 0.7} Ba{sub 0.3}CoO{sub 3} thin films revealed by combining Raman spectroscopy and X-ray diffraction

In cobaltite, the spin states transitions of Co{sup 3+/4+} ions govern the magnetic and electronic conduction properties. These transitions are strain-sensitive and can be varied using external parameters, including temperature, hydrostatic pressure, or chemical stresses through ionic substitutions. In this work, using temperature dependent Raman spectroscopy and X-ray diffraction, the epitaxial strain effects on both structural and vibrational properties of La{sub 0.7} Ba{sub 0.3} CoO{sub 3} (LBCO) cobaltite thin films are investigated. All Raman active phonon modes as well as the structure are found to be strongly affected. Both Raman modes and lattice parameter evolutions show temperature changes correlated with magnetic and electronic transitions properties. Combining Raman spectroscopy and X-ray diffraction appears as a powerful approach to probe the spin transition in thin film cobaltite. Our results provide insight into strong spin-charge-phonon coupling in LBCO thin film. This coupling manifests as vibrational transition with temperature in the Raman spectra near the ferromagnetic spin ordered transition at 220 K.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Desalination utilizing clathrate hydrates (LDRD final report).

Advances are reported in several aspects of clathrate hydrate desalination fundamentals necessary to develop an economical means to produce municipal quantities of potable water from seawater or brackish feedstock. These aspects include the following, (1) advances in defining the most promising systems design based on new types of hydrate guest molecules, (2) selection of optimal multi-phase reactors and separation arrangements, and, (3) applicability of an inert heat exchange fluid to moderate hydrate growth, control the morphology of the solid hydrate material formed, and facilitate separation of hydrate solids from concentrated brine. The rate of R141b hydrate formation was determined and found to depend only on the degree of supercooling. The rate of R141b hydrate formation in the presence of a heat exchange fluid depended on the degree of supercooling according to the same rate equation as pure R141b with secondary dependence on salinity. Experiments demonstrated that a perfluorocarbon heat exchange fluid assisted separation of R141b hydrates from brine. Preliminary experiments using the guest species, difluoromethane, showed that hydrate formation rates were substantial at temperatures up to at least 12 C and demonstrated partial separation of water from brine. We present a detailed molecular picture of the structure and dynamics of R141b guest molecules within water cages, obtained from ab initio calculations, molecular dynamics simulations, and Raman spectroscopy. Density functional theory calculations were used to provide an energetic and molecular orbital description of R141b stability in both large and small cages in a structure II hydrate. Additionally, the hydrate of an isomer, 1,2-dichloro-1-fluoroethane, does not form at ambient conditions because of extensive overlap of electron density between guest and host. Classical molecular dynamics simulations and laboratory trials support the results for the isomer hydrate. Molecular dynamics simulations show that R141b hydrate is stable at temperatures up to 265K, while the isomer hydrate is only stable up to 150K. Despite hydrogen bonding between guest and host, R141b molecules rotated freely within the water cage. The Raman spectrum of R141b in both the pure and hydrate phases was also compared with vibrational analysis from both computational methods. In particular, the frequency of the C-Cl stretch mode (585 cm{sup -1}) undergoes a shift to higher frequency in the hydrate phase. Raman spectra also indicate that this peak undergoes splitting and intensity variation as the temperature is decreased from 4 C to -4 C.

08 HYDROGEN↗

Spectroscopic and physicochemical measurements for on-line monitoring of used nuclear fuel separation processes

Separation processes for used nuclear fuel are often complicated and challenging due to the high constraints in purity of the products and safeguards of the process streams. In order to achieve a safe, secure and efficient separation process, the liquid streams in the separation process require close monitoring. Due to the high radiation environment, sampling of the materials is difficult. Availability of a detection technique that is remote, non-destructive and can avoid time-delay caused by retrieving samples would be beneficial and could minimize the exposure to personnel and provide material accountancy to avoid diversion (non-proliferation). For example, Ultra Violet (UV), Visible (Vis), Near-Infrared (NIR) and Raman spectroscopy that detect and quantify elements present in used nuclear fuel, e.g. lanthanides, actinides and molecules such as nitrate, can be used. In this work, we have carried out NIR and Raman spectroscopy to study aqueous solutions composed of different concentrations of nitric acid, sodium nitrate, and neodymium at varied temperatures. A chemometric model for online monitoring based on the PLS-Toolbox (MATLAB) software has been developed and validated to provide chemical composition of process streams based on spectroscopic data. In conclusion, both of our NIR and Raman spectra were useful for H{sup +} and NO{sub 3} prediction, and only NIR was helpful for the Nd{sup 3+} prediction.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Anisotropic thermal expansion and anharmonic phonon behavior of mullite-type Bi{sub 2}Ga{sub 4}O{sub 9}

Graphical abstract: - Highlights: • Anisotropic lattice thermal expansion of Bi{sub 2}Ga{sub 4}O{sub 9} was modeled using extended Grüneisen first-order approximation. • The model includes harmonic, quasi-harmonic and intrinsic anharmonic contributions to the internal energy. • Temperature dependent Raman frequency shift and line-width was analyzed using symmetric phonon decay channel. - Abstract: We report the lattice thermal expansion and the temperature-dependent phonon behavior of the mullite-type Bi{sub 2}Ga{sub 4}O{sub 9} complex oxide. The thermal expansion was studied using composite data collected from powder and single crystal X-ray diffraction between 100 K and 1273 K. The lattice expansion occurred in the order of a < c < b. The anisotropic expansion behavior was monitored with respect to thermal expansion coefficients and the anisotropy factor. The volume thermal expansion was expressed using an extended Grüneisen first-order approximation to the zero-pressure equation of state; the model includes harmonic, quasi-harmonic and intrinsic anharmonic contributions to the internal energy as a function of temperature. The temperature dependent Raman spectra were collected from a single crystal between 78 K and 1273 K. The shift of the frequencies and the broadening of the line-widths with increasing temperature helped to analyze the anharmonicity and the thermal behavior of some phonons.

36 MATERIALS SCIENCE↗

Effect of Ni doping on structural and optical properties of Zn{sub 1−x}Ni{sub x}O nanopowder synthesized via low cost sono-chemical method

Highlights: • Pure and Ni doped ZnO nanopowders were synthesized by low cost sonochemical method. • The optical properties of Zn{sub 1−x}Ni{sub x}O nanopowders can be tuned by varying Ni content. • The results reveal the solubility limit of Ni into ZnO matrix as below 8%. - Abstract: Zn{sub 1−x}Ni{sub x}O nanopowders with different Ni contents of x = 0.0, 0.04 and 0.08 were synthesized via cost effective sonochemical reaction method. X-ray diffraction (XRD) pattern reveals pure wurtzite phase of prepared nanostructures with no additional impurity peaks. The morphology and dimensions of nanoparticles were investigated using scanning electron microscope (SEM). A sharp and strong peak for first order optical mode for wurtzite zinc oxide (ZnO) structure was observed at ∼438 cm{sup −1} in Raman spectra. The calculated optical band gap (E{sub g}) from UV–vis transmission data was found to decrease with increase in Ni content. The observed red shift in E{sub g} with increasing Ni content in ZnO nanopowders were in agreement with band gap behaviours found in their photoluminescence (PL) spectra. The synthesised ZnO nanopowders with controlled band gap on Ni doping reveals their potential for use in various electronic and optical device applications. The results were discussed in detail.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural modification and bandgap tunning of cubic AlN thin film by carbon ions irradiations

This paper deals with the 700 keV energetic Carbon (C) ions irradiations induced structrual modification and optical bandgap tunning of cubic (c) AlN thin films. MOCVD grown c-AlN thin film has been exposed to C ions at various ions fluences of 1 × 10{sup 13}, 1 × 10{sup 14} and 1 × 10{sup 15} ions.cm{sup −2}. XRD patterns exhibited that films retain their cubic crystal structure after ions irradiations, indicating their structural stability against irradiation. Full width at half maximum of the XRD peaks remains almost same for pristine and irradiated films. Ions irradiations at fluence of 1 × 10{sup 14} ions/cm{sup 2}, produces compressive stresses as observed from the shifts in (220) orientation peaks. However, its pristine position is restored with a further rise of ions fluence to 1 × 10{sup 15} ions/cm{sup 2}, thereby relieving the induced stresses. Raman spectra also indicated that the stress produced at lower fluence are recovered with further increase of the fluence. The bandgap obtained from UV-visible optical transmission spectra also modulated with ions dose rate and is changed from 5.88 eV (for as grown) to 5.62 eV at maximum fluence.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure and optical homogeneity of LiNbO{sub 3}:Zn (0.03–4.5 mol.%) crystals

Structure and optical homogeneity of LiNbO{sub 3}:Zn (0.03–4.5 mol.%) crystals were searched by photoinduced light scattering and by Raman spectroscopy. The photorefractive effect depends on Zn{sup 2+} concentration nonmonotonically. Decrease of photorefractive effect is explained by decrease of structure defects with localized electrons. The Zn{sup 2+} cations replace structure defects Nb{sub Li} and Li{sub Nb}, trapping levels appear near the bottom of the conduction band and photo electrons recombine with emission under laser radiation. By the Raman spectra the area of the high structure order is found. In this area the own alternation, the alternation of impurity cations and the vacancies along the polar axis is almost perfect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mechanosynthesis, deposition and characterization of CZTS and CZTSe materials for solar cell applications

Mechanosynthesis of nanocrystalline powders of CZTS and CZTSe by ball milling technique and the physical properties of thermally evaporated CZTS and CZTSe thin films as a function of substrate temperature are investigated. Nanocrystalline Cu–Zn–Tin–Sulphide (CZTS) and Cu–Zn–Tin–Selenide (CZTSe) powders synthesized by ball milling at different milling time using the source materials of Cu, Zn, Sn, S (or) Se in the ratio 2:1:1:4 are investigated. The above synthesized powder was thermally evaporated on glass substrate kept at room temperature and 673 K under a vacuum of 10{sup −6} mbar to prepare quaternary compound semiconducting thin films in a single step process. The synthesized powder and deposited CZTS and CZTSe thin films belong to tetragonal crystal system. Raman spectra reveal that the synthesized nanocrystals are pure without any secondary phases. A gradual reduction in optical bandgap of films was observed with increasing substrate temperature due to increased crystallinity of the films. The changes in surface morphology of the films with respect to substrate temperature were studied by scanning electron microscopy and atomic force microscopy. Electrical studies indicate that the deposited films have p-type conductivity. - Highlights: • Nanocrystalline powders of CZTS and CZTSe are synthesized by ball milling technique. • The ball milled powder was thermally evaporated on glass at room temperature and 673 K. • Raman spectroscopy reveals that the synthesized nanocrystals are pure without any secondary phases. • SEM and AFM micrographs illustrate the granular type of growth and the roughness and particle sizes obtained at the substrate temperature of 673 K are higher than those obtained in the room temperature. • Hall coefficient obtained for the film confirms the p-type conductivity. • A gradual reduction in optical bandgap was observed with increasing substrate temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of indium and antimony doping in SnS single crystals

Highlights: • Single crystals growth of pure SnS, indium doped SnS and antimony doped SnS by direct vapour transport (DVT) technique. • Doping of In and Sb occurred in SnS single crystals by cation replacement. • The replacement mechanism ascertained by EDAX, XRD and substantiated by Raman spectra analysis. • Dopants concentration affects the optical energy bandgap. • Doping influences electrical transport properties. - Abstract: Single crystals of pure SnS, indium (In) doped SnS and antimony (Sb) doped SnS were grown by direct vapour transport (DVT) technique. Two doping concentrations of 5% and 15% each were employed for both In and Sb dopants. Thus in total five samples were studied viz., pure SnS (S1), 5% In doped SnS (S2), 15% In doped SnS (S3), 5% Sb doped SnS (S4) and 15% Sb doped SnS (S5). The grown single crystal samples were characterized by evaluating their surface microstructure, stoichiometric composition, crystal structure, Raman spectroscopy, optical and electrical transport properties using appropriate techniques. The d.c. electrical resistivity and thermoelectric power variations with temperature showed semiconducting and p-type nature of the as-grown single crystal samples. The room temperature Hall Effect measurements further substantiated the semiconducting and p-type nature of the as-grown single crystal samples. The obtained results are deliberated in detail.

36 MATERIALS SCIENCE↗

Diamond synthesis at atmospheric pressure by microwave capillary plasma chemical vapor deposition

Polycrystalline diamond has been synthesized on silicon substrates at atmospheric pressure, using a microwave capillary plasma chemical vapor deposition technique. The CH{sub 4}/Ar plasma was generated inside of quartz capillary tubes using 2.45 GHz microwave excitation without adding H{sub 2} into the deposition gas chemistry. Electronically excited species of CN, C{sub 2}, Ar, N{sub 2}, CH, H{sub β}, and H{sub α} were observed in the emission spectra. Raman measurements of deposited material indicate the formation of well-crystallized diamond, as evidenced by the sharp T{sub 2g} phonon at 1333 cm{sup −1} peak relative to the Raman features of graphitic carbon. Field emission scanning electron microscopy images reveal that, depending on the growth conditions, the carbon microstructures of grown films exhibit “coral” and “cauliflower-like” morphologies or well-facetted diamond crystals with grain sizes ranging from 100 nm to 10 μm.

36 MATERIALS SCIENCE↗

A qualitative study of spin polarization effect in defect tuned Co/graphene/Co nanostructures

Theoretical reports predict that in contact with a ferromagnetic giant spin, spin polarization evolves in defective graphene since defects in graphene act as local spin moments. We have synthesized different Co/graphene/Co nano spin valve like structures tuning the degree of defect applying ultrasonic vibration and characterized them by Raman spectroscopy. Initially with increasing I{sub D}/I{sub G} ratio in Raman spectra, antiferromagnetic coupling between the Co nanosheets on either sides of graphene enhances leading to betterment in spin transport through graphene. But for highest I{sub D}/I{sub G}, a totally new phenomenon called antiferro quadrupolar ordering (AFQ) takes place which eventually reduces the spin polarization effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Facile synthesis of one dimensional ZnO nanostructures for DSSC applications

Development of zinc oxide (ZnO) nanostructure based third generation dye sensitized solar cell is interesting compared to conventional silicon solar cells. ZnO nanostructured thin films were electrochemically deposited onto fluorine doped tin oxide (FTO) glass substrate. The effect of ethylene-diamine-tetra-acetic acid (EDTA) on structural, morphological and optical properties is investigated using X-ray diffraction (XRD) meter, field emission scanning electron microscope (FE-SEM) and micro Raman spectroscopy. XRD patterns reveal that the prepared nanostructures are hexagonal wutrzite structures with (101) plane orientation, the nanostructure prepared using EDTA exhibits better crystallinity. FE-SEM images illustrate that the morphological changes are observed from nanorod structure to cauliflower like structure as EDTA is added. Micro Raman spectra predict that cauliflower like structure possesses a higher crystalline nature with less atomic defects compared to nanorod structures. Dye sensitized solar cell (DSSC) is constructed for the optimized cauliflower structure, and open circuit voltage, short circuit density, fill factor and efficiency are estimated from the J-V curve.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Hydrogen Annealing Effect on the Magnetic Properties of ZnCoO/MoS{sub 2} Hybrid

The ZnCoO/MoS{sub 2} hybrid is successfully synthesized through a general and facile process. High-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Raman spectra reveal that the hybrid consists of wurtzite ZnCoO and few layers of MoS{sub 2}, which shows a paramagnetic property. In contrast, the hybrid presents clear magnetic hysteresis at room temperature with a H{sub 2} post-annealing process. No Co metal nanoclusters can be identified by XRD and HRTEM. The red shift of E{sub 2g}{sup 1} and A{sub 1g} peak indicates the strain effect induced by H{sub 2} annealing. On the other hand, the disappeared peak at 477 cm{sup −1} can be ascribed to the modification of the interface and surface state of the ZnCoO. Temperature-dependent Raman spectroscopies demonstrate the significant H{sub 2} annealing effect on the structural properties of ZnCoO/MoS{sub 2} hybrid. The interplay between the electron interaction at the interface and oxygen vacancies of ZnCoO can be responsible for the magnetic properties of the ZnCoO/MoS{sub 2} hybrid. The tunable magnetic properties have a promising application in multifunctional MoS{sub 2}-based semiconductor and spintronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Raman spectroscopy of glasses in the As-Te system

For the first time, the Raman spectra of As{sub x}Te{sub 1-x} glasses, 0.2{<=}x{<=}0.6, have been measured over the entire glass-forming range. The spectra exhibit three broad spectral features attributed to vibrations of structural units having Te-Te, As-Te and As-As bonds. The observed chemical disorder in the glasses is discussed on the basis of partial bond fractions derived from the integrated intensity of the Raman modes. The underlying structural model suggests a dissociation of AsTe- or As{sub 2}Te{sub 3}-related units in the glass melt. The spectra of glasses quenched from different temperatures, as well as those of the annealed vitreous alloys, are consistent with predictions of the model. - Graphical abstract: Raman spectra of the As{sub x}Te{sub 1-x} glasses (0.2{<=}x{<=}0.4 and 0.4{<=}x{<=}0.6). Fractional concentrations of Te-Te, As-Te and As-As bonds in the As{sub x}Te{sub 1-x} glasses calculated using experimental Raman data. The solid lines represent predictions of the dissociation model assuming that the main chemically ordered structural units are related to AsTe. Highlights: Black-Right-Pointing-Pointer For the first time, the Raman spectra of As{sub x}Te{sub 1-x} glasses, 0.2{<=}x{<=}0.6, were measured. Black-Right-Pointing-Pointer The partial bond fractions were derived from the integrated intensity of the Raman modes. Black-Right-Pointing-Pointer An empirical quantitative approach to the Raman data was proposed for the reaction modeling.

36 MATERIALS SCIENCE↗

Raman spectroscopy of GaP/GaNP core/shell nanowires

Raman spectroscopy is employed to characterize structural and phonon properties of GaP/GaNP core/shell nanowires (NWs) grown by molecular beam epitaxy on Si substrates. According to polarization-dependent measurements performed on single NWs, the dominant Raman modes associated with zone-center optical phonons obey selection rules in a zinc-blende lattice, confirming high crystalline quality of the NWs. Two additional modes at 360 and 397 cm{sup −1} that are specific to the NW architecture are also detected in resonant Raman spectra and are attributed to defect-activated scattering involving zone-edge transverse optical phonons and surface optical phonons, respectively. It is concluded that the formation of the involved defect states are mainly promoted during the NW growth with a high V/III ratio.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pressure-induced reversible phase transition in thiourea dioxide crystal

The effect of high pressure on the crystal structure of thiourea dioxide has been investigated by Raman spectroscopy and angle-dispersive X-ray diffraction (ADXRD) in a diamond anvil cell up to 10.3 GPa. The marked changes in the Raman spectra at 3.7 GPa strongly indicated a structural phase transition associated with the distortions of hydrogen bonding. There were no further changes up to the maximum pressure of 10.3 GPa and the observed transition was completely reversible when the system was brought back to ambient pressure. This transition was further confirmed by the changes of ADXRD spectra. The high-pressure phase was indexed and refined to an orthorhombic structure with a possible space group Pbam. The results from the first-principles calculations suggested that this phase transition was mainly related to the changes of hydrogen-bonded networks in thiourea dioxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗