Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RADIATION INTENSITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Indium Tin Oxide-Magnesium Fluoride Co-Deposited Films for Spacecraft Applications

Highly transparent coatings with a maximum sheet resistivity between 10(exp 8) and 10(exp 9) ohms/square are desired to prevent charging of solar arrays for low Earth polar orbit and geosynchronous orbit missions. Indium tin oxide (ITO) and magnesium fluoride (MgF2) were ion beam sputter co-deposited onto fused silica substrates and were evaluated for transmittance, sheet resistivity and the effects of simulated space environments including atomic oxygen (AO) and vacuum ultraviolet (VUV) radiation. Optical properties and sheet resistivity as a function of MgF2 content in the films will be presented. Films containing 8.4 wt.% MgF2 were found to be highly transparent and provided sheet resistivity in the required range. These films maintained a high transmittance upon exposure to AO and to VUV radiation, although exposure to AO in the presence of charged species and intense electromagnetic radiation caused significant degradation in film transmittance. Sheet resistivity of the as-fabricated films increased with time in ambient conditions. Vacuum beat treatment following film deposition caused a reduction in sheet resistivity. However, following vacuum heat treatment, sheet resistivity values remained stable during storage in ambient conditions.

Dever, Joycer A.↗

Radiation Effects: Core Project

The risks to personnel in space from the naturally occurring radiations are generally considered to be one of the most serious limitations to human space missions, as noted in two recent reports of the National Research Council/National Academy of Sciences. The Core Project of the Radiation Effects Team for the National Space Biomedical Research Institute is the consequences of radiations in space in order to develop countermeasure, both physical and pharmaceutical, to reduce the risks of cancer and other diseases associated with such exposures. During interplanetary missions, personnel in space will be exposed to galactic cosmic rays, including high-energy protons and energetic ions with atomic masses of iron or higher. In addition, solar events will produce radiation fields of high intensity for short but irregular durations. The level of intensity of these radiations is considerably higher than that on Earth's surface, and the biological risks to astronauts is consequently increased, including increased risks of carcinogenesis and other diseases. This group is examining the risk of cancers resulting from low-dose, low-dose rate exposures of model systems to photons, protons, and iron by using ground-based accelerators which are capable of producing beams of protons, iron, and other heavy ions at energies comparable to those encountered in space. They have begun the first series of experiments using a 1-GeV iron beam at the Brookhaven National Laboratory and 250-MeV protons at Loma Linda University Medical Center's proton synchrotron facility. As part of these studies, this group will be investigating the potential for the pharmaceutical, Tamoxifen, to reduce the risk of breast cancer in astronauts exposed to the level of doses and particle types expected in space. Theoretical studies are being carried out in a collaboration between scientists at NASA's Johnson Space Center and Johns Hopkins University in parallel with the experimental program have provided methods and predictions which are being used to assess the levels of risks to be encountered and to evaluate appropriate strategies for countermeasures. Although the work in this project is primarily directed toward problems associated with space travel, the problem of protracted exposures to low-levels of radiation is one of national interest in our energy and defense programs, and the results may suggest new paradigms for addressing such risks.

Dicello, John F.↗

Protostellar condensations in the core of NGC 2024

The J = 4-3 transition of HCO(+) was observed in the core of NGC 2024. The findings indicate a possibly expanding torus centered around the FIR 6 continuum source and an E-W ridge below the ionization front. The presence of HCO(+) J = 4-3 emission from the torus and E-W ridge suggests relatively high gas densities in these regions. The relatively strong intensity of the observed HCO(+) J = 4-3 emission toward the FIR source suggests that the emission originates from relatively warm and dense gas. Continuum radiation transport modeling of the core shows that submillimeter and millimeter continuum observations of the cores can be reproduced under the assumption that the cores are externally heated objects without internal heating sources. This requires a factor of about 250 enhancement of the external radiation field intensity compared to the standard Galactic radiation field. This enhancement is consistent with the stellar luminosities required to explain the observed FIR continuum emission from the region.

Lis, D. C.↗

Polarization of low-frequency electromagnetic radiation in the lobes of Jupiter's magnetotail

The plasma wave instruments on the Voyager spacecraft have detected intense electromagnetic radiation within the lobes of Jupiter's magnetic tail down to the lowest frequency of the detector (10 Hz). During a yaw maneuver performed by Voyager 1 in the lobe of the Jovian magnetotail, a modulation appeared in the amplitudes of waves detected in the 10-, 17.8- and 31.1-Hz channels of the plasma wave analyzer, well below the local electron cyclotron frequency of 260 Hz. The lowest amplitudes occurred when the antenna axis was most nearly parallel to the magnetic field. Wave amplitudes in the 56.2-Hz and higher frequency channels remained nearly constant during the maneuver. From the cold-plasma theory of electromagnetic waves, it is concluded that the plasma frequency was between the 56.2- and 31.1-Hz channels where the parallel-polarized component of the spectrum cuts off. This implies a tail-lobe density between 0.000032 and 0.000015/cu cm. The left-hand cutoff frequency would then be below 10 Hz, consistent with either the Z-mode (L, X) or whistlers (R-mode) in the modulated channels.

Moses, S. L.↗

Direct measurements by Voyagers 1 and 2 of the polarization of terrestrial kilometric radiation

Measurements of the polarization of intense terrestrial kilometric radiation obtained with planetary radio astronomy experiments on Voyager-1 and 2 during the early portions of each flight show the signals to be predominantly left-hand circularly polarized. Since these emissions were most probably generated above the Northern Hemisphere auroral zone, we conclude that the radiation is emitted primarily in the extraordinary mode.

Kaiser, M. L.↗

Investigating Extreme Events in the NASA GEOS Multiscale Modeling System

Advances in computing capabilities and scientific development have come together to evolve general circulation models into multi-scale Earth system modeling tools. The Goddard Earth Observing System (GEOS) model is one such example of this evolution. The GEOS model is driven by the finite-volume cubed-sphere (FV3) non-hydrostatic dynamical core. Surrounding FV3 is a scale-aware physics package and data assimilation capability permitting multi-scale application of GEOS for sub-seasonal to seasonal climate prediction, medium range weather prediction, and global mesoscale modeling at convection allowing resolutions. GEOS also includes a comprehensive chemistry package representing a range of capabilities from basic chemistry and interactve aerosols and gaseous species, to carbon emissions and uptake, and complex ozone photochemistry. In this study, we apply the GEOS model to study the fidelity of these processes with increasing horizontal resolution and scale-aware processes in GEOS on extreme events. The GEOS model is run for 40-days beginning in August 2016 at three uniform global resolutions of 13-km (c768), 6-km (c1536) and 3-km (c3072) with 72 vertical levels up to 0.01mb. The model physics use the Grell-Freitas scale-aware convection scheme to dynamically reduce the role of parameterized deep convection as resolved scale processes in the model take over at higher resolutions. We will include high-resolution global emissions and fluxes of aerosols and carbon downscaled from recent satellite observations. We will compare these simulations with reanalyses and observations, focusing on rainfall, clouds and radiative forcing at hourly to monthly timescales. We will closely examine the probability distribution of precipitation intensities and radiative properties of clouds on a daily time scale. In addition, we will focus on extreme events, in particular the diurnal cycle of convection over the US and the frequency and physical nature of organized convection and heavy rain events across the globe.

Putman, William↗

Material Response of One-Dimensional, Steady-State Transpiration Cooling in Radiative and Convective Environments

A simplified analytical solution for thermal response of a transpiration-cooled porous heat-shield material in an intense radiative-convective heating environment is presented. Essential features of this approach are "two-flux method" for radiative transfer process and "two-temperature" assumption for solid and gas temperatures. Incident radiative-convective heatings are specified as boundary conditions. Sample results are shown using porous silica with CO2 transpiration and some parameters quantitatively show the effect on this transpiration cooling system. Summarized maps for mass injection rate, porosity and blowing correction factor for radiation are obtained in order to realize such a cooling system.

Kubota, Hirotoshi↗

A simplified analytical solution for thermal response of a one-dimensional, steady state transpiration cooling system in radiative and convective environment

A simplified analytical method for calculation of thermal response within a transpiration-cooled porous heat shield material in an intense radiative-convective heating environment is presented. The essential assumptions of the radiative and convective transfer processes in the heat shield matrix are the two-temperature approximation and the specified radiative-convective heatings of the front surface. Sample calculations for porous silica with CO2 injection are presented for some typical parameters of mass injection rate, porosity, and material thickness. The effect of these parameters on the cooling system is discussed.

Kubota, H.↗

A radiation-hardened star scanner for spacecraft guidance and control

A star scanner for the Galileo Project is described. Because it must function in the intense Jupiter radiation field, which consists primarily of high-energy electrons and protons, this star scanner is designed with radiation-hardness as a prime objective. The optics and the multiplier phototube are specially designed to minimize fluorescence and Cerenkov effects, and the electronic components to minimize ionization and displacement damage. The star-scanner layout provides maximum shielding for the optics and phototube. Test results predict successful operation in the expected Jovian radiation environment.

Birnbaum, M. M.↗