Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Probability distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Support of selected X-ray studies to be performed using data from the Uhuru (SAS-A) satellite

A new measurement of the diffuse X-ray emission sets more stringent upper limits on the fluctuations of the background and on the number counts of X-ray sources with absolute value of b 20 deg than previous measurements. A random sample of background data from the Uhuru satellite gives a relative fluctuation in excess of statistics of 2.0% between 2.4 and 6.9 keV. The hypothesis that the relative fluctuation exceeds 2.9% can be rejected at the 90% confidence level. No discernable energy dependence is evident in the fluctuations in the pulse height data, when separated into three energy channels of nearly equal width from 1.8 to 10.0 keV. The probability distribution of fluctuations was convolved with the photon noise and cosmic ray background deviation (obtained from the earth-viewing data) to yield the differential source count distribution for high latitude sources. Results imply that a maximum of 160 sources could be between 1.7 and 5.1 x 10 to the -11 power ergs/sq cm/sec (1-3 Uhuru counts).

Garmire, G. P.↗
NASA NTRS1976

Stochastic sea state for SRB studies

Ocean surface characteristics at two locations were studied for a space shuttle solid rocket booster ocean impact and recovery analysis. Probability distributions of wave heights, wave slopes, wave velocities, ocean currents, and 1-kilometer altitude winds were formulated. Procedures for generating ocean wave simulations are described.

Perlmutter, M.↗
NASA NTRS1976

Aircraft motion and passenger comfort data from scheduled commercial airline flights

Data concerning the ride quality of aircraft taken on board commercial airline flights was presented. Five types of data are included: (1) root mean square (RMS) values of linear acceleration, angular acceleration or angular velocities, along with passenger subjective evaluations, (2) power spectra for the motion in each of six degrees of freedom, (3) scattergrams showing the probability density of the rms accelerations in the vertical and transverse directions, (4) probability distributions of the motion, and (5) on board noise levels during takeoff, climb, cruise, and descent.

Gruesbeck, M. G.↗
NASA NTRS1976

Nondeterministic data base for computerized visual perception

A description is given of the knowledge representation data base in the perception subsystem of the Mars robot vehicle prototype. Two types of information are stored. The first is generic information that represents general rules that are conformed to by structures in the expected environments. The second kind of information is a specific description of a structure, i.e., the properties and relations of objects in the specific case being analyzed. The generic knowledge is represented so that it can be applied to extract and infer the description of specific structures. The generic model of the rules is substantially a Bayesian representation of the statistics of the environment, which means it is geared to representation of nondeterministic rules relating properties of, and relations between, objects. The description of a specific structure is also nondeterministic in the sense that all properties and relations may take a range of values with an associated probability distribution.

Yakimovsky, Y.↗
NASA NTRS1976

The computer simulation of automobile use patterns for defining battery requirements for electric cars

A Monte Carlo simulation process was used to develop the U.S. daily range requirements for an electric vehicle from probability distributions of trip lengths and frequencies and average annual mileage data. The analysis shows that a car in the U.S. with a practical daily range of 82 miles (132 km) can meet the needs of the owner on 95% of the days of the year, or at all times other than his long vacation trips. Increasing the range of the vehicle beyond this point will not make it more useful to the owner because it will still not provide intercity transportation. A daily range of 82 miles can be provided by an intermediate battery technology level characterized by an energy density of 30 to 50 watt-hours per pound (66 to 110 W-hr/kg). Candidate batteries in this class are nickel-zinc, nickel-iron, and iron-air. The implication of these results for the research goals of far-term battery systems suggests a shift in emphasis toward lower cost and greater life and away from high energy density.

Schwartz, H. J.↗
NASA NTRS1975

SEASAT economic assessment. Volume 10: The SATIL 2 program (a program for the evaluation of the costs of an operational SEASAT system as a function of operational requirements and reliability

The SATIL 2 computer program was developed to assist with the programmatic evaluation of alternative approaches to establishing and maintaining a specified mix of operational sensors on spacecraft in an operational SEASAT system. The program computes the probability distributions of events (i.e., number of launch attempts, number of spacecraft purchased, etc.), annual recurring cost, and present value of recurring cost. This is accomplished for the specific task of placing a desired mix of sensors in orbit in an optimal fashion in order to satisfy a specified sensor demand function. Flow charts are shown, and printouts of the programs are given.

Source record↗
NASA NTRS1976

A BBGKY framework for fluid turbulence

A framework is presented for a systematic kinetic theory of turbulence originating from the Liouville equation for the Fourier coefficients of fluid variables. The real and imaginary parts of these Fourier coefficients play the role that particle coordinates (positions and momenta) play in the BBGKY theory. The basic relations of the problem are the incompressible Navier-Stokes equations in two dimensions with zero viscosity, with the probability distributions of Fourier coefficients rather than moments being the basic variables of the theory. A kinetic equation is derived and shown to possess a number of requirements that any reasonable kinetic equation must have: conservation laws, positive-definite spectral densities, and an H-theorem. The major lack in the theory is any reliable information on the relaxation predicted by the complicated linear operator H. Closure of the hierarchy is achieved by the hypothesis that the five-coefficient correlation function is negligible. Problems associated with inclusion of viscosity and external driving forces are discussed.

Montgomery, D.↗
NASA NTRS1976

A decision model for planetary missions

Many techniques developed for the solution of problems in economics and operations research are directly applicable to problems involving engineering trade-offs. This paper investigates the use of utility theory for decision making in planetary exploration space missions. A decision model is derived that accounts for the objectives of the mission - science - the cost of flying the mission and the risk of mission failure. A simulation methodology for obtaining the probability distribution of science value and costs as a function spacecraft and mission design is presented and an example application of the decision methodology is given for various potential alternatives in a comet Encke mission.

Hazelrigg, G. A., Jr.↗
NASA NTRS1978

Defining structural limit zones

Method for defining limit loads uses probability distribution of largest load occurring during given time intervals. Method is compatible with both deterministic and probabilistic structural design criteria. It also rationally accounts for fact that longer structure is exposed to random loading environment, greater is possibility that it will experience extreme load.

Merchant, D. H.↗
NASA NTRS1977

Probabilistic fracture mechanics and optimum fracture control of the solid rocket motor case of the shuttle

Development of a procedure for the reliability analysis of the solid rocket motor case of the space shuttle is described. The analysis is based on probabilistic fracture mechanics and consideration of a probability distribution for the initial flaw sizes. The reliability analysis can be used to select design variables, such as the thickness of the SRM case, projected design life and proof factor, on the basis of minimum expected cost and specified reliability bounds. Effects of fracture control plans such as the non-destructive inspections and the material erosion between missions can also be considered in the developed methodology for selection of design variables. The reliability-based procedure can be easily modified to consider other similar structures and different fracture control plans.

Hanagud, S.↗
NASA NTRS1977

Probabilistic Fracture Mechanics and Optimum Fracture Control Analytical Procedures for a Reusable Solid Rocket Motor Case

A methodology for the reliability analysis of a reusable solid rocket motor case is discussed. The analysis is based on probabilistic fracture mechanics and probability distribution for initial flaw sizes. The developed reliability analysis is used to select the structural design variables of the solid rocket motor case on the basis of minimum expected cost and specified reliability bounds during the projected design life of the case. Effects of failure prevention plans such as nondestructive inspection and the material erosion between missions are also considered in the developed procedure for selection of design variables. The reliability-based procedure can be modified to consider other similar structures of reusable space vehicle systems with different failure prevention plans.

Hanagud, S.↗
NASA NTRS1977

Computations and applications of linear hypergeometric transformations

Linear transformations are well-known in the theory of hypergeometric functions. In this note, it is indicated, both by analyses and by supporting numerical experiments, how these transformations can be applied to the computation of Legendre's functions, the incomplete Beta function, and the variance-ratio probability distribution function. It is shown that a simple transformation can in many cases cause dramatic improvement in computation.

Ng, E. W.↗
NASA NTRS1977

Polarization loss of a satellite - Data collection sensor link

It is noted that the stringent economy of data-collection systems consisting of several widely dispersed satellite-monitored sensor platforms can be partially achieved by using an inexpensive linearly polarized antenna on each platform and that due to Faraday rotation of the ionosphere, the satellite antenna must be circularly polarized to avoid a prohibitive polarization loss. The cumulative probability distribution of polarization loss between a linearly polarized platform antenna and an elliptically polarized satellite antenna is computed for satellite-antenna axial ratios of 3 and 4 dB. The results indicate that a polarization loss of 4.5 dB must be expected for a reliability of 85% and an axial ratio of 3 dB. It is suggested that the conventional assignment of a 3-dB polarization loss to the communication link considered may not insure the required link reliability.

Estep, H.↗
NASA NTRS1977

Ground winds and winds aloft Edwards AFB, California

Ground level runway wind statistics cover crosswind, tailwind, and headwind reversal percentage frequencies with respect to month and hour for the two major runways. Also presented are bivariate normal wind statistics for a 90 degree flight azimuth for altitudes 0 through 27 km. Wind probability distributions, synthetic vector wind profiles, and statistics for any rotation of axes are computed from five given parameters.

Johnson, D. L.↗
NASA NTRS1978

Ground winds and winds aloft for Edwards AFB, California (1978 revision)

Ground level runway wind statistics for the Edwards AFB, California area are presented. Crosswind, headwind, tailwind, and headwind reversal percentage frequencies are given with respect to month and hour for the two major Edwards AFB runways. Also presented are Edwards AFB bivariate normal wind statistics for a 90 degree flight azimuth for altitudes 0 through 27 km. Wind probability distributions and statistics for any rotation of axes can be computed from the five given parameters.

Johnson, D. L.↗
NASA NTRS1978

Feature discrimination/identification based upon SAR return variations

A study of the statistics of The look-to-look variation statistics in the returns recorded in-flight by a digital, realtime SAR system are analyzed. The determination that the variations in the look-to-look returns from different classes do carry information content unique to the classes was illustrated by a model based on four variants derived from four look in-flight SAR data under study. The model was limited to four classes of returns: mowed grass on a athletic field, rough unmowed grass and weeds on a large vacant field, young fruit trees in a large orchard, and metal mobile homes and storage buildings in a large mobile home park. The data population in excess of 1000 returns represented over 250 individual pixels from the four classes. The multivariant discriminant model operated on the set of returns for each pixel and assigned that pixel to one of the four classes, based on the target variants and the probability distribution function of the four variants for each class.

Rasco, W. A., Sr.↗
NASA NTRS1978

Delay decomposition at a single server queue with constant service time and multiple inputs

Two network consisting of single server queues, each with a constant service time, are considered. The external inputs to each network are assumed to follow some general probability distribution. Several interesting equivalencies that exist between the two networks considered are derived. This leads to the introduction of an important concept in delay decomposition. It is shown that the waiting time experienced by a customer can be decomposed into two basic components called self-delay and interference delay.

Ziegler, C.↗