Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Plastic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Deformation twinning and detwinning in extruded Mg-4Al: In-situ experiment and crystal plasticity simulation

Deformation twinning and detwinning in extruded Mg-4Al were investigated using in-situ SEM-DIC experiments and crystal plasticity finite element (CPFE) simulation. In this study, the in-situ SEM-DIC method was used to provide a unique set of data including twin/detwin characteristics and twin area fraction in addition to strain maps. A statistical analysis of the activation of twin variants and twin area fraction during both twinning and detwinning was conducted. A strong correlation was found between twin growth/shrinkage and the Schmid Factor (SF) for individual twin variants Higher twin SF during loading and unloading led to higher twin growth and shrinkage, respectively. However, after the applied compressive strain was removed, the pattern of the twin area fractions of the residual twin variants versus their nominal SFs did not follow the trend observed at the maximum compressive strain. Using a systematic methodology and an advanced twin/detwin model, the PRISMS-Plasticity CPFE simulation was calibrated using experimentally determined stress versus strain and twin area fraction versus strain information. A comprehensive evaluation of the CPFE model was conducted to determine its ability to capture the statistics of twin variants activation and twin area fraction. CPFE accurately captured the statistical aspects of both twinning and detwinning. Finally, it also predicted the first dominant twin variant for 47.5% of the grains and at least one of the two dominant twin variants for 80% of the grains at maximum compressive strain.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Origins of high ductility exhibited by an extruded magnesium alloy Mg-1.8Zn-0.2Ca: Experiments and crystal plasticity modeling

Low ductility and strength are major bottlenecks against Mg alloys' wide applications. In this work, we systematically design the composition and fabrication process for a low-alloyed Mg-Zn-Ca alloy, showing that it can be extruded at low temperatures (~ 250 degrees C) and high speeds (~2 mm/s). After the extrusion, this alloy exhibits a substantially weakened basal texture, relatively small grain size, very high tensile elongation (~ 30%), and good strength. The origin of the considerably improved ductility was studied using a combination of three-dimensional atom probe tomography (3D-APT), transmission electron microscopy (TEM), electron backscattered diffraction (EBSD) in conjunction with surface slip trace analysis, in-situ synchrotron X-ray diffraction, and elasto-plastic self-consistent (EPSC) modeling. Co-segregation of Zn and Ca atoms at a grain boundary is observed and associated with texture weakening and grain boundary mediated plasticity, both improving the ductility. While basal slip and prismatic slip are identified as the dominant deformation systems in the alloy, the ratio between their slip resistances is substantially reduced relative to pure Mg and most other Mg alloys, significantly contributing to the improved ductility of the alloy. This Mg-Zn-Ca alloy exhibiting excellent mechanical properties and low fabrication cost is a promising candidate for industrial productions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A spatially-resolved model of neutron-irradiated tungsten coupling stochastic cluster dynamics and finite deformation plasticity

Structural materials used in nuclear reactors face severe degradation in mechanical properties, such as hardening and embrittlement. At the microscopic scale, this occurs due to creation and accumulation of irradiation-induced defects and their interaction with system dislocations. Although techniques exist which can model evolution of irradiation defects, for instance kinetic transport theory-based models, their interaction with mechanical deformation of the bulk material has not been investigated extensively. In this work, we demonstrate a novel spatially-resolved multiscale coupling between microscopic irradiation defect evolution, modeled using Stochastic Cluster Dynamics (SCD) and macroscopic mechanical deformation modeled using a finite-deformation plasticity model. SCD is used to determine the statistically averaged defect cluster spacing, dependent on operating conditions such as irradiation dose and temperature. This acts as an initial condition that governs the critical resolved shear stress of dislocation glide in the macroscopic plasticity model. This framework is used to predict mechanical behavior in post-mortem test of irradiated Tungsten samples, which has found its importance as structural material used in nuclear reactors. The results obtained using the coupled approach are in good agreement with experimental data of uniaxial tension tests. The model is able to capture the effect of temperature and irradiation dose on the material hardening. Two methods are proposed to estimate hardness – using Tabor's Law relating uniaxial yield stress to hardness and from flat-punch simulations. The results are in reasonable agreement with hardness data from micro-indentation experiments of irradiated Tungsten samples. Finally, the model is also able to reveal microstructural details such as spatial variation in defect density and local stress.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Pyrolysis in Molten Salts Converts Plastics into a Mesoporous Electrocatalyst with a High Density of Atomic Fe–N–C Active Site

Upcycling plastic waste into value-added products is a promising strategy for both economic and environmental sustainability. However, achieving control over structure–property correlations during the upcycling process remains challenging. Here, in this study, we investigate the modulation of active site formation during pyrolytic conversion of plastics to carbon by composition-controlled molten salts. Using melamine formaldehyde (MF) foams as a precursor, we demonstrate that their pyrolysis in eutectic chloride molten salts with Fe 2+ , Na + , and K + ions directs the carbonization process toward the formation of mesoporous functional carbon enriched with atomically dispersed Fe–N–C sites, which are well-known for their catalytic activity in oxygen reduction reaction (ORR). Compared to pyrolysis in the FeCl 2 -only salt, the incorporation of alkali metal ions (Na + , K + ) in the eutectic mixture facilitates nitrogen retention in the carbon matrix and modulates iron speciation. This synergistic environment promotes a higher density and more uniform dispersion of Fe–N–C moieties within the carbon matrix. Consequently, the resulting catalyst exhibits a high surface area, hierarchical porosity, and improved electrochemical properties. When tested as an ORR catalyst, the Fe–N–C-enriched catalyst delivers a high half-wave potential (E 1/2 = 0.875 V vs RHE) with nearly exclusive 4e – pathway. These properties are comparable to those of commercial Pt/C catalysts, along with improved stability.

Fe−N−C active sites↗
DOE OSTI2026

Photooxidative Upcycling of Post-Consumer Polystyrene Plastics into Phenol Using Eosin Y

Phenol is a commodity chemical frequently used in the manufacturing of resins, pharmaceuticals, and polymers. Yet, its industrial production from cumene requires harsh oxidative conditions followed by the Hock rearrangement. Polystyrene (PS) is a widely manufactured commodity polymer; however, it is among the least recycled plastics. Intriguingly, it is composed of contiguous cumene repeats that could serve as a phenol source, enhancing its value as a waste material. In this work, we leverage the similarity between cumene and PS to drive phenol production via a mild photooxidative HAT mechanism. Using Eosin Y under blue light irradiation and atmospheric pressure of oxygen, commercial PS resin was converted into hydroperoxyl PS. Subsequent acid-catalyzed Hock rearrangement afforded up to 21% yield of phenol. The photooxidation system was successfully applied to 8 post-consumer PS plastics, achieving phenol yields up to 23%, comparable to those of the current industrial Hock process. Our method introduces a mild catalytic strategy for converting post-consumer PS into phenol, offering a potential pathway for PS waste valorization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Plastic Waste Product Captures Carbon Dioxide in Nanometer Pores

We discuss, plastic waste (PW) and increasing atmospheric carbon dioxide (CO 2 ) levels are among the top environmental concerns presently facing humankind. With an ambitious 2050 zero-CO 2 emissions goal, there is a demand for economical CO 2 capture routes. Here we show that the thermal treatment of PW in the presence of potassium acetate yields an effective carbon sorbent with pores width of 0.7–1.4 nm for CO 2 capture. The PW to carbon sorbent process works with single or mixed streams of polyolefin plastics. The CO 2 capacity of the sorbent at 25 °C is 17.0 ± 1.1 wt % (3.80 ± 0.25 mmol g –1 ) at 1 bar and 5.0 ± 0.6 wt % (1.13 ± 0.13 mmol g –1 ) at 0.15 bar, and it regenerates upon reaching 75 ± 5 °C. The CO 2 capture cost from flue gas via this technology is estimated to be <$21 ton –1 CO 2 , much lower than competing CO 2 capture technologies. Hence, this PW-derived carbon material should find utility in the capture of CO 2 from point sources of high CO 2 emissions while providing a use for otherwise deleterious PW.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2026

Delamination of Multilayer Plastic Films to Recover Polyethylene with Favorable Mechanical Properties

Multilayer plastic films play a critical role in packaging, with each polymer layer contributing specific properties to the multilayer film. Multilayer plastic films are not currently recyclable due to the bound polymers. With multilayer film production of about 20 million metric tons in 2024 and rising, endof- life treatment becomes pressing. This work presents a scalable solvent-based delamination recycling process that is applied to commercial postindustrial multimaterial films to unbind the materials within a multilayer film by dissolving only the adhesive layer and recover polyethylene (PE) as an intact solid film. Solventbased delamination is a simple process that allows the complete recovery of materials and solvents used in the process. The delaminating solvent, 88% formic acid in water, induces delamination of PE/PEI/PET and PE/PU/PET films at 70 °C in under an hour. Recovered PE has no contamination detected by Fourier transform infrared spectroscopy and mechanical properties on par with those of virgin resin. The recovery of high-quality solid PE film fit for reprocessing, at low operating temperatures and with closed-loop solvent reuse, promotes delamination as a low energy consumption and environmentally friendly recycling process. PE recovered from delamination can be reused in equivalent products, promoting circularity of multimaterial films.

chemical recycling↗
DOE OSTI2022

Mixed Plastics Waste Valorization through Tandem Chemical Oxidation and Biological Funneling

Mixed plastics waste represents an abundant and largely untapped feedstock for the production of valuable products. The chemical diversity and complexity of these materials, however, present major barriers to realizing this opportunity. In this work, we show that metal-catalyzed autoxidation depolymerizes comingled polymers into a mixture of oxygenated small molecules that are advantaged substrates for biological conversion. We engineer a robust soil bacterium, Pseudomonas putida, to funnel these oxygenated compounds into a single exemplary chemical product, either ..beta..-ketoadipate or polyhydroxyalkanoates. This hybrid process establishes a strategy for the selective conversion of mixed plastics waste into useful chemical products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Upcycling of Waste Plastics into Carboxylic Acids for Biodegradable Surfactants

This work outlines a process for producing high‐purity (>95%) carboxylate surfactants from post‐consumer recycled high‐density polyethylene (PCR‐HDPE). The approach involves the thermal depolymerization of PCR‐HDPE via pyrolysis, followed by fractional distillation to isolate C9–C14 olefins. These olefins undergo hydroformylation using cobalt carbonyl catalysts to generate aldehydes, which are subsequently oxidized to carboxylic acids using Pinnick oxidation under mild aqueous‐phase conditions. Neutralization of the resulting carboxylic acids with sodium hydroxide produces plastic‐derived carboxylate surfactants (PDCs) in the form of sodium carboxylates. Subsequent purification steps ensure surfactant‐grade purity and enable accurate assessment of physicochemical properties. The resulting PDCs are evaluated for critical micelle concentration (CMC), foamability, surface tension reduction, and calcium ion tolerance, demonstrating competitive behavior with conventional anionic carboxylate surfactants. This route provides a sustainable alternative for surfactant production, reducing reliance on fossil‐derived feedstocks and valorizing plastic waste streams through chemical upcycling.

Biodegradable surfactants↗
DOE OSTI2026

Catalytic Autoxidation for Depolymerization of Multilayer Plastic Films

Recycling multilayer plastic films is challenged by a diversity of polymers, prompting development of new recycling methods. For the depolymerization of mixed polymers like those in multilayer films, metal-catalyzed autoxidation offers a versatile chemical recycling method to deconstruct multiple polymers to useful oxygenates. Here, we demonstrate that catalytic autoxidation is effective for depolymerizing multilayer films across diverse chemistries. We investigated conditions for a model polyethylene substrate using a Co, Mn, and Br cocatalyst system, achieving full carbon closure with oxygenated small molecules contributing up to 48 mol% carbon. Subsequently, we characterized product distributions for several common polymers used in multilayer films using high-resolution mass spectrometry (HRMS) and developed analytical methods to quantify the resulting complex product streams. Optimized conditions for polyethylene were applied to 11 multilayer plastic films containing 10 different polymers, including films with nonpolymeric potential disrupters like aluminum foil and titanium dioxide, showing that catalytic autoxidation is effective across a broad range of polymer types and is resistant to disrupters and additives. The generation of CO 2 in these reactions overall suggests that both reaction engineering and modifications to the reaction conditions will be required to achieve higher yields of soluble oxygenated products.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Utilization of Ultrasonication as a Method of Reducing Organic and Inorganic Contamination in Post‐Consumer Plastic Film Waste

Post-consumer plastic film waste often carries organic and inorganic contaminants that challenge recycling processes and affect the quality of recycled products. An effective contaminant removal procedure through washing such single-used plastic films (SUPFs) can address environmental and waste management concerns. This study compares the efficiency of different washing techniques in reducing SUPF contamination. To evaluate the efficacy of each washing technique, film samples collected from material recovery facilities are individually exposed to friction, ultrasonic-assisted, and a combination of both washes. Thermal analysis indicates that the polymers' melting temperature, crystallization temperature, and crystallinity remain unaffected by the washing methods, demonstrating method aptness. Confocal laser scanning microscope images show that washing results in a cleaner sample surface. 91% ash reduction during the combined wash treatment indicates a high method efficiency compared to the individual friction and ultrasonic wash procedures. This is further validated by reducing characteristic contaminant IR bands (3600–3000, 1750–1600, and 1100–1000 cm −1 ). Elements of concern such as Cd, Cr, Hg, and Pb in SUPFs after each washing technique applied conform with regulations (<100 ppm) for packaging products. This research shows the novel ultrasonic washing reduces more contamination than friction with shorter wash times and no surfactants.

42 ENGINEERING↗
DOE OSTI2025

Response tailoring of elasto-plastic trusses

Abstract In this work we tailor the response of trusses loaded beyond their yield limit. The truss structures are modeled using finite strain theory and rate-independent elasto-plasticity. We design trusses with a tailored mechanical response that is between “elastic” and “elastic-ideal-plastic” subject to the volume constraint. The design updates are generated by the gradient-based Method of Moving Asymptotes (MMA) solver and the sensitivities of the response functions are computed using a path-dependent adjoint sensitivity analysis. The computations are performed in Matlab.

42 ENGINEERING↗
DOE OSTI2020

Tradeoffs between phenotypic plasticity and local adaptation influence the ecophysiology of the moss, Sphagnum magellanicum

Bryophytes are a diverse plant group and are functionally different from vascular plants. Yet, their peculiarities are rarely considered in the theoretical frameworks for plants. Currently, we lack information about the magnitude and the importance of intraspecific variability in the ecophysiology of bryophytes and how these might translate to local adaptation—a prerequisite for adaptive evolution. Capitalizing on two ecologically distinct (hummock and hollow) phenotypes of Sphagnum magellanicum, we explored the magnitude and pattern of intraspecific variability in this species and asked whether the environmental-mediated changes in shoot and physiological traits are due to phenotypic plasticity or local adaptation. Size, pigmentation, and habitat type that distinguished the phenotypes in the field did not influence the trait responses under a transplant and factorial experiment. In addition, the magnitude and pattern of trait variability (e.g., branch, stem and capitulum mass) changed with the treatments, which suggest that trait responses were due largely to phenotypic plasticity. The trait responses also suggest that the ecophysiological needs for mosses to grow in clumps, where they maintain a uniform growth may have an overriding effect over the potential for a fixed adaptive response to environmental heterogeneity, which would constrain local adaptation. In this paper, we conclude that extending the trait-based framework to mosses or making comparisons between mosses and vascular plants under any theoretical framework would only be meaningful to the extent that growth form and dispersal strategies are considered.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Root architectural plasticity optimizes nutrient acquisition in switchgrass under variable phosphorus forms

Aims Understanding the influence of different forms of phosphorus (P) over the different root traits and how those traits are related to increasing the efficiency of nutrient acquisition strategies. Methods Investigation of switchgrass (Panicum virgatum L.) root morphology responses to inorganic P (Pi) soluble (Potassium-P), insoluble (Aluminum-P), and organic P (Po) (Inositol Hexa-Phosphate, IHex-P) in rhizoboxes. Roots were traced over the root box and scanned using WinRhizoTM. The CRootbox model was employed to simulate root growth. Results Significant plasticity observed under IHex-P treatment, with a 46% increase in root branching, leading to a 74% rise in total root length and a 65% increase in root surface area compared to inorganic P forms. IHex-P resulted in a 73% higher root biomass than Aluminum-P and a 26% increase compared to Potassium-P. Most of the differences were attributed to the elongation of root branches. Conclusions Here, the study emphasizes the dynamic nature of switchgrass root architecture and morphology in response to varying P forms in the soil. The absence of Pi in the soil triggered increased plasticity in root traits, facilitating root access to Po and uptake of P. These findings offer valuable insights into the adaptive mechanisms of perennial plants, with significant implications for optimizing nutrient acquisition strategies in both agricultural and natural ecosystems.

Organic phosphorus↗
DOE OSTI2020

Thermomechanical conversion in metals: dislocation plasticity model evaluation of the Taylor-Quinney coefficient

Using a partitioned-energy thermodynamic framework which assigns energy to that of atomic configurational stored energy of cold work and kinetic-vibrational, in this study we derive an important constraint on the Taylor-Quinney coefficient, which quantifies the fraction of plastic work that is converted into heat during plastic deformation. Associated with the two energy contributions are two separate temperatures – the ordinary temperature for the thermal energy and the effective temperature for the configurational energy. We show that the Taylor-Quinney coefficient is a function of the thermodynamically defined effective temperature that measures the atomic configurational disorder in the material. Finite-element analysis of recently published experiments on the aluminum alloy 6016-T4 [1], using the thermodynamic dislocation theory (TDT), shows good agreement between theory and experiment for both stress-strain behavior and temporal evolution of the temperature. The simulations include both conductive and convective thermal energy loss during the experiments, and significant thermal gradients exist within the simulation results. Computed values of the differential Taylor-Quinney coefficient are also presented and suggest a value which differs between materials and increases with increasing strain.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Role of interfaces on phase formation during severe plastic deformation

The role of interfaces on phase formation during severe plastic deformation (SPD) was investigated using molecular dynamics simulations. It is found that dilute solute additions that segregate to interphase boundaries, and strengthen them, can greatly extend the solubility limits of the bounding phases at steady state, providing a novel approach to processing nanocomposite alloys by SPD. Here, the results are rationalized in terms of a modified effective temperature model, whereby increasing the interface strength leads to higher effective temperatures and correspondingly to higher solubilities. Comparison of the segregation coefficient at the interphase boundary with solubilities in the bounding phases illustrates the effective temperature model is self-consistent and comprehensive. Past experimental studies on severe plastic deformation are found consistent with these observations.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Unraveling kinking: A plasticity enhancing failure mode in high strength nano metallic laminates

Kinking is an important and plasticity-enhancing deformation/failure mode in numerous mechanically anisotropic materials including high-strength nano metallic laminates (NMLs). However, our current limited understanding of the mechanics of kinking and its dependence on microstructural attributes is insufficient for thoroughly comprehending and eventually being able to control failure behaviors of materials. In this study, we investigate kinking dependencies on microstructural attributes in NMLs via in situ micropillar compression, multiscale microstructure characterization, dislocation dynamic simulations, and crystal plasticity modeling. Additionally, by examining several NML systems (Cu/Fe, Ag/Fe, Al-4Mg/Fe), we demonstrate that the development of internal stresses during loading activates local layer-parallel glide triggering kinking in NMLs. Furthermore, this work reveals the effect of key microstructural features including layer thickness, layer waviness, interface barrier strength, and work hardening capacity on kink band formation in NMLs. More broadly, our efforts represent a generically applicable approach for probing large-strain deformation behavior of complex materials via synergetic modeling and experimental efforts.

36 MATERIALS SCIENCE↗