Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Temporal and spatial relationships between O V and Fe XXI emissions in solar flares

The temporal-spatial structure of simple solar flares observed with the Ultraviolet Spectrometer and Polarimeter of the Solar Maximum mission satellite has been studied in order to investigate the relationships between the impulsive O V and the gradual Fe XXI emissions. The point-like flares are characterized by the cotemporal evolution of the O V and Fe XXI emissions. The simple loop flares have a much larger spatial extent and show two distinctive phases: an initial impulsive phase with its emission localized in loop footpoints, and a gradual phase with its emission distributed in the loop. The temporal evolution of the Fe XXI and O V emissions in a flare is found to be closely related to its spatial structure.

Cheng, Chung-Chieh↗

A synthesis of lunar highlands compositional data

Based on compositions of lunar soils and endogeneous highland rocks and mineral phase relationships, a composition for the non-KREEP, mafic portion of the lunar highlands is determined through the use of a mixing model. It is found that the most common materials making up the surface highlands appear to be ferroan anorthosite (FAN) and a material of olivine norite composition (HON, highlands olivine norite) in roughly equal proportions. It is also found that the composition of HON is similar to that of the residual liquid from crystallization of FAN and that the proportion of FAN to HON at the lunar surface appears to be much higher than the phase relations allow for the extent of evolution of HON from a primitive plagioclase-saturated liquid. This is seen as implying an excess of FAN in the upper highlands.

Korotev, R. L.↗

Effects of ion two-stream instability on auroral ion heating

The ion two-stream instability develops between upflowing H(+) and O(+) in the auroral acceleration region, if the two species are accelerated to different velocities in a semistationary electrostatic potential. Parallel propagating modes are unstable only for small relative drifts, while oblique modes remain unstable at larger drifts and, consequently, higher altitudes. The effects of oblique modes on ion heating are investigated, and it is found that O(+) heats primarily by trapping in the direction of wave propagation during the early, coherent phase of wave growth in the temporal evolution problem. After undergoing trapping along the magnetic field direction, H(+) heats primarily by quasi-linear diffusion when the spectrum broadens nonlinearly. The parallel ion distributions evolve by formation of a high-energy (low-energy) tail on oxygen (hydrogen) along with bulk slowing of hydrogen, which results in more energetic oxygen than hydrogen. Total heating is greatest in the direction of wave propagation, and this effect is greater for hydrogen than for oxygen.

Roth, I.↗

Nonlinear techniques for forecasting solar activity directly from its time series

Numerical techniques for constructing nonlinear predictive models to forecast solar flux directly from its time series are presented. This approach makes it possible to extract dynamical invariants of our system without reference to any underlying solar physics. We consider the dynamical evolution of solar activity in a reconstructed phase space that captures the attractor (strange), given a procedure for constructing a predictor of future solar activity, and discuss extraction of dynamical invariants such as Lyapunov exponents and attractor dimension.

Ashrafi, S.↗

Project Wish: The Emerald City, phase 3

Phase 3 of Project Wish saw the evolution of the Emerald City (E-City) from a collection of specialized independent analyses and ideas to a working structural design integrated with major support systems and analyses. Emphasis was placed on comparing and contrasting the closed and open cycle gas core nuclear rocket engines to further determine the optimum propulsive system for the C-City. Power and thermal control requirements were then defined and the question of how to meet these requirements was addressed. Software was developed to automate the mission/system/configuration analysis so changes dictated by various subsystems constraints could be managed efficiently and analyzed interactively. In addition, the liquid hydrogen propellant tank was statically designed for minimum mass and shape optimization using a finite element modeling package called SDRC I-DEAS while spoke and shaft cross-sectional areas were optimized on ASTROS (Automated Structural Optimization System). A structural dynamic analysis also conducted using ASTROS enabled a study of the displacements, accelerations, modes and frequencies of the C-City. Finally, the attitude control system design began with an initial mass moment of inertia analysis and was then designed and optimized using linear quadratic regulator control theory.

Source record↗

Demonstration of automated proximity and docking technology

Automated spacecraft docking operations are being performed using a full scale motion based simulator and an optical sensor. This presentation will discuss the work in progress at TRW and MSFC facilities to study the problem of automated proximity and docking operations. The docking sensor used in the MSFC Optical Sensor and simulation runs are performed using the MSFC Flat Floor Facility. The control algorithms and six degrees of freedom (6DOF) simulation software were developed at TRW and integrated into the MSFC facility. Key issues being studied are the quantification of docking sensor requirements and operational constraints necessary to perform automated docking maneuvers, control algorithms capable of performing automated docking in the presence of sensitive and noisy sensor data, and sensor technologies for automated proximity and docking operations. As part of this study the MSFC sensor characteristics were analyzed and modeled so that off line simulation runs can be performed for control algorithm testing. Our goal is to develop and demonstrate full 6DOF docking capabilities with actual sensors on the MSFC motion based simulator. We present findings from actual docking simulation runs which show sensor and control loop performance as well as problem areas which require close attention. The evolution of various control algorithms using both phase plane and Clohessy-Wiltshire techniques are discussed. In addition, 6DOF target acquisition and control strategies are described.

Anderson, Robert L.↗

Nonlinear techniques for forecasting solar activity directly from its time series

This paper presents numerical techniques for constructing nonlinear predictive models to forecast solar flux directly from its time series. This approach makes it possible to extract dynamical in variants of our system without reference to any underlying solar physics. We consider the dynamical evolution of solar activity in a reconstructed phase space that captures the attractor (strange), give a procedure for constructing a predictor of future solar activity, and discuss extraction of dynamical invariants such as Lyapunov exponents and attractor dimension.

Ashrafi, S.↗

Program Predicts Microstructural Changes In Materials

MCFET computer program, named for combined Monte Carlo Finite Element Technique, implements specialized microstructural-lattice simulation technique. Developed to simulate microstructural evolution in material systems in which modulated phases occur and directionality of modulation influenced by internal and external stresses. Written in FORTRAN.

Gayda, J.↗

Variations in the Fe mineralogy of bright Martian soil

Bright regions on Mars are interpreted as 'soil' derived by chemical alteration of crustal rocks, whose main pigmentary component is ferric oxide or oxyhydroxide. The mineralogy and mineralogic variability of ferric iron are important evidence for the evolution of Martian soil: mineralogy of ferric phases is sensitive to chemical conditions in their genetic environments, and the spatial distributions of different ferric phases would record a history of both chemical environments and physical mixing. Reflectance spectroscopic studies provide several types of evidence that discriminate possible pigmentary phases, including the position of a crystal field absorption near 0.9 microns and position and strengths of absorptions in the UV-visible wavelength region. Recent telescopic spectra and laboratory measurements of Mars soil analogs suggest that spectral features of bright soil can be explained based on a single pigmentary phase, hematite (alpha-Fe2O3), occurring in both 'nanophase' and more crystalline forms. Here we report on a systematic investigation of Martian bright regions using ISM imaging spectrometer data, in which we examined spatial variations in the position and shape of the approximately 0.9 microns absorption. We found both local and regional heterogeneities that indicate differences in Fe mineralogy. These results demonstrate that bright soils do not represent a single lithology that has been homogenized by eolian mixing, and suggest that weathering of soils in different geologic settings has followed different physical and chemical pathways.

Murchie, Scott↗

Project WISH: The Emerald City

Phase 3 of Project WISH saw the evolution of the Emerald City (E-City) from a collection of specialized independent analyses and ideas to a working structural design integrated with major support systems and analyses. Emphasis was placed on comparing and contrasting the closed and open cycle gas core nuclear rocket engines to further determine the optimum propulsive system for the E-City. Power and thermal control requirements were then defined and the question of how to meet these requirements was addressed. Software was developed to automate the mission/system/configuration analysis so changes dictated by various subsystem constraints could be managed efficiently and analyzed interactively. In addition, the liquid hydrogen propellant tank was statically designed for minimum mass and shape optimization using a finite element modeling package called SDRC I-DEAS. Spoke and shaft cross-sectional areas were optimized on ASTROS (Automated Structural Optimization System) for mass minimization. A structural dynamic analysis of the optimal structure also conducted using ASTROS enabled a study of the modes, frequencies, displacements, and accelerations of the E-City. Finally, the attitude control system design began with an initial mass moment of inertia analysis and was then designed and optimized using linear quadratic regulator control theory.

Oz, Hayrani↗

OH/IR stars near the Galactic Center: Pulsation periods, luminosities, and polarimetry

17 stars in the direction of the Galactic Center, 15 of which are OH/IR stars, have been monitored at infrared wavelengths over a period of nearly eight years. Pulsation periods, bolometric luminosities, and light curves for 14 OH/IR stars are presented. The Galactic Center OH/IR stars range in luminosity between M(sub Bol) = -4.5 to M(sub Bol) = -6, implying main sequence progenitors with masses less than 3 solar mass. When compared to optically visible long period variables in the Large Magellanic Cloud (LMC) with similar bolometric luminosities, the Galactic Center OH/IR stars have pulsation periods on average 30% longer. This shift to longer periods is consistent with the current picture of late asymptotic giant branch evolution, placing the OH/IR stars in a phase immediately following the optically visible Mira variable phase during which the star dramatically increases its mass loss rate, becoming invisible at optical wavelength. Infrared polarimetry of 11 of the stars is also presented. The polarization for all of the stars is consistent with purely interstellar polarization, with little evidence for a significant intrinsic component. When compared to OH/IR stars in the galactic plane, the Galactic Center OH/IR stars appear similar in photometric characteristics, except none of the Galactic Center OH/IR stars shows the extremely thick dust shells or very high intrinsic polarization found in the more extreme galactic plane OH/IR stars.

Jones, Terry Jay↗

Charge-induced secondary atomization in diffusion flames of electrostatic sprays

The combustion of electrostatic sprays of heptane in laminar counterflow diffusion flames was experimentally studied by measuring droplet size and velocity distributions, as well as the gas-phase temperature. A detailed examination of the evolution of droplet size distribution as droplets approach the flame shows that, if substantial evaporation occurs before droplets interact with the flame, an initially monodisperse size distribution becomes bimodal. A secondary sharp peak in the size histogram develops in correspondence of diameters about one order of magnitude smaller than the mean. No evaporation mechanism can account for the development of such bimodality, that can be explained only in terms of a disintegration of droplets into finer fragments of size much smaller than that of the parent. Other evidence in support of this interpretation is offered by the measurements of droplet size-velocity correlation and velocity component distributions, showing that, as a consequence of the ejection process, the droplets responsible for the secondary peak have velocities uncorrelated with the mean flow. The fission is induced by the electric charge. When a droplet evaporates, in fact, the electric charge density on the droplet surface increases while the droplet shrinks, until the so-called Rayleigh limit is reached at which point the repulsion of electric charges overcomes the surface tension cohesive force, ultimately leading to a disintegraton into finer fragments. We report on the first observation of such fissions in combustion environments. If, on the other hand, insufficient evaporation has occurred before droplets enter the high temperature region, there appears to be no significant evidence of bimodality in their size distribution. In this case, in fact, the concentration of flame chemi-ions or, in the case of positively charged droplets, electrons may be sufficient for them to neutralize the charge on the droplets and to prevent disruption.

Gomez, Alessandro↗

Chemistry of Star-Forming Cores

Chemical effects arising from the exchange of molecules between dust and gas in dense clumps are described. Selective desorption of CO and N2 from grains in cool cores can account for the presence of ammonia in several cores in the NGC 2024 cloud. Evaporation of ices containing methanol and ethanol can lead to detectable abundances of (C2H5)(sub 2)O and CH3OC2H5. Results are presented for the hot core chemistries of sulphur and phosphorus which are initiated by evaporated hydrogen sulphide and phosphine. The implications of these studies for understanding the nature of molecular mantles, the evolution of molecular complexity in the gas phase, and the presence of small-scale abundance gradients in star-forming regions, are briefly discussed.

Charnley, S. B.↗

Application of Domain Knowledge to Software Quality Assurance

This work focused on capturing, using, and evolving a qualitative decision support structure across the life cycle of a project. The particular application of this study was towards business process reengineering and the representation of the business process in a set of Business Rules (BR). In this work, we defined a decision model which captured the qualitative decision deliberation process. It represented arguments both for and against proposed alternatives to a problem. It was felt that the subjective nature of many critical business policy decisions required a qualitative modeling approach similar to that of Lee and Mylopoulos. While previous work was limited almost exclusively to the decision capture phase, which occurs early in the project life cycle, we investigated the use of such a model during the later stages as well. One of our significant developments was the use of the decision model during the operational phase of a project. By operational phase, we mean the phase in which the system or set of policies which were earlier decided are deployed and put into practice. By making the decision model available to operational decision makers, they would have access to the arguments pro and con for a variety of actions and can thus make a more informed decision which balances the often conflicting criteria by which the value of action is measured. We also developed the concept of a 'monitored decision' in which metrics of performance were identified during the decision making process and used to evaluate the quality of that decision. It is important to monitor those decision which seem at highest risk of not meeting their stated objectives. Operational decisions are also potentially high risk decisions. Finally, we investigated the use of performance metrics for monitored decisions and audit logs of operational decisions in order to feed an evolutionary phase of the the life cycle. During evolution, decisions are revisisted, assumptions verified or refuted, and possible reassessments resulting in new policy are made. In this regard we implemented a machine learning algorithm which automatically defined business rules based on expert assessment of the quality of operational decisions as recorded during deployment.

Wild, Christian W.↗

The Interaction Between Dynamics and Chemistry of Ozone in the Set-up Phase of the Northern Hemisphere Polar Vortex

The morphology and evolution of the stratospheric ozone (O3) distribution at high latitudes in the Northern Hemisphere (NH) are examined for the late summer and fall seasons of 1999. This time period sets the O3 initial condition for the SOLVE/THESEO field mission performed during winter 1999-2000. In situ and satellite data are used along with a three-dimensional model of chemistry and transport (CTM) to determine the key processes that control the distribution of O3 in the lower-to-middle stratosphere. O3 in the vortex at the beginning of the winter season is found to be nearly constant from 500 to above 800 K with a value at 3 ppmv +/- approx. 10%. Values outside the vortex are up to a factor of 2 higher and increase significantly with potential temperature. The seasonal time series of data from POAM shows that relatively low O3 mixing ratios, which characterize the vortex in late fall, are already present at high latitudes at the end of summer before the vortex circulation sets up. Analysis of the CTM output shows that the minimum O3 and increase in variance in late summer are the result of: 1) stirring of polar concentric O3 gradients by nascent wave-driven transport, and 2) an acceleration of net photochemical loss with decreasing solar illumination. The segregation of low O3 mixing ratios into the vortex as the circulation strengthens through the fall suggests a possible feedback role between O3 chemistry and the vortex formation dynamics. Trajectory calculations from O3 sample points early in the fall, however, show only a weak correlation between initial O3 mixing ratio and potential vorticity later in the season consistent with order-of-magnitude calculations for the relative importance of O3 in the fall radiative balance at high latitudes. The possible connection between O3 chemistry and the dynamics of vortex formation does suggest that these feedbacks and sensitivities need to be better understood in order to make confident predictions of the recovery of NH O3.

Kawa, S. R.↗

The Propagation and Formation of Electron Holes

One of the striking findings of the International Solar Terrestrial Physics (ISTP) program is the detection of electron holes by several satellites in different regions of the magnetosphere, near the bow shock, and in the solar wind. These measurements have come from FAST (Fast Auroral Snapshot Explorer), Polar, Geotail, and Wind satellites. Using a 2-D (two dimensional) PIC (particle in cell) code we investigate the parameters of one and two electron beams on the evolution, structure, and stability of electron phase-space holes.

Coffey, Victoria↗

Microstructure and Mechanical Properties of Extruded Gamma Met PX

A gamma TiAl alloy with a high Nb content is being assessed as a compressor blade material. The microstructure and mechanical properties of extruded Ti-45Al-X(Nb,B,C) (at %) were evaluated in both an as-extruded condition and after a lamellar heat treatment. Tensile behavior of both as-extruded and lamellar heat treated specimens was studied in the temperature range of RT to 926 C. In general, the yield stress and ultimate tensile strength reached relatively high values at room temperature and decreased with increasing deformation temperature. The fatigue strength of both microstructures was characterized at 650 C and compared to a baseline TiAl alloy and to a Ni-base superalloy. Tensile and fatigue specimens were also exposed to 800 C for 200 h in air to evaluate the alloy's environmental resistance. A decrease in ductility was observed at room temperature due to the 800 C exposure but the 650 C fatigue properties were unaffected. Compressive and tensile creep testing between 727 and 1027 C revealed that the creep deformation was reproducible and predictable. Creep strengths reached superalloy-like levels at fast strain rates and lower temperatures but deformation at slower strain rates and/or higher temperature indicated significant weakening for the as-extruded condition. At high temperatures and low stresses, the lamellar microstructure had improved creep properties when compared to the as-extruded material. Microstructural evolution during heat treatment, identification of various phases, and the effect of microstructure on the tensile, fatigue, and creep behaviors is discussed.

Draper, S. L.↗