Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Payload”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

A mass additive technique for modal testing as applied to the Space Shuttle ASTRO-1 payload

Traditionally, a fixed base modal test has been performed as a means of verifying the coupled loads math model for Space Shuttle flight payloads. An alternate method, a free-free configured payload using mass loaded boundary conditions, is presented as a means of verifying the coupled loads model of the ASTRO-1 flight payload. This method allows evaluation of the influence of local load paths into the frequency range of the free-free test. The method is cost effective and does not contaminate the modal test results with fixture coupled modes or boundary condition uncertainties. This paper describes the mass additive modal test technique as applied to the Space Shuttle ASTRO-1 flight payload.

Coleman, A. D.↗
NASA NTRS1989

Modeling and control of flexible space platforms with articulated payloads

The first steps in developing a methodology for spacecraft control-structure interaction (CSI) optimization are identification and classification of anticipated missions, and the development of tractable mathematical models in each mission class. A mathematical model of a generic large flexible space platform (LFSP) with multiple independently pointed rigid payloads is considered. The objective is not to develop a general purpose numerical simulation, but rather to develop an analytically tractable mathematical model of such composite systems. The equations of motion for a single payload case are derived, and are linearized about zero steady-state. The resulting model is then extended to include multiple rigid payloads, yielding the desired analytical form. The mathematical models developed clearly show the internal inertial/elastic couplings, and are therefore suitable for analytical and numerical studies. A simple decentralized control law is proposed for fine pointing the payloads and LFSP attitude control, and simulation results are presented for an example problem. The decentralized controller is shown to be adequate for the example problem chosen, but does not, in general, guarantee stability. A centralized dissipative controller is then proposed, requiring a symmetric form of the composite system equations. Such a controller guarantees robust closed loop stability despite unmodeled elastic dynamics and parameter uncertainties.

Graves, Philip C.↗
NASA NTRS1990

The development of a complementary expendable launch vehicle interface for an STS deployable payload

The development is described of an interface, the Titan Payload Adapter (TPA), between a Space Transportation System (STS) deployable payload and an expendable launch vehicle (ELV). Separate ascent and separation constraint systems allow a payload with integral trunnions to retain its originally designed, boost-phase load structure, yet also allow the expendable booster vehicle to separate from the payload via retro-rockets. Design requirements as well as development problems and their solutions are discussed.

Eubanks, ED↗
NASA NTRS1990

Payload training methodology study

The results of the Payload Training Methodology Study (PTMS) are documented. Methods and procedures are defined for the development of payload training programs to be conducted at the Marshall Space Flight Center Payload Training Complex (PCT) for the Space Station Freedom program. The study outlines the overall training program concept as well as the six methodologies associated with the program implementation. The program concept outlines the entire payload training program from initial identification of training requirements to the development of detailed design specifications for simulators and instructional material. The following six methodologies are defined: (1) The Training and Simulation Needs Assessment Methodology; (2) The Simulation Approach Methodology; (3) The Simulation Definition Analysis Methodology; (4) The Simulator Requirements Standardization Methodology; (5) The Simulator Development Verification Methodology; and (6) The Simulator Validation Methodology.

Source record↗
NASA NTRS1989

Payload accommodation and development planning tools - A Desktop Resource Leveling Model (DRLM)

The Desktop Resource Leveling Model (DRLM) has been developed as a tool to rapidly structure and manipulate accommodation, schedule, and funding profiles for any kind of experiments, payloads, facilities, and flight systems or other project hardware. The model creates detailed databases describing 'end item' parameters, such as mass, volume, power requirements or costs and schedules for payload, subsystem, or flight system elements. It automatically spreads costs by calendar quarters and sums costs or accommodation parameters by total project, payload, facility, payload launch, or program phase. Final results can be saved or printed out, automatically documenting all assumptions, inputs, and defaults.

Hilchey, John D.↗
NASA NTRS1989

A new sounding rocket payload for solar plasma studies

A sounding rocket payload developed for studies of high-temperature plasmas associated with solar active regions and flares is described. The payload instruments will record both spectra and images in the UV, EUV, and soft X-ray regions of the spectrum. The instruments, including the Dual Range Spectrograph, the Flat Field Soft X-ray Spectrograph, the Normal Incidence Soft X-ray Imager, the UV Filtergraph, and the H-alpha Imaging system, are described. Attention is also given to the new structural system of the payload, based on a large optical table suspended within the payload cavity, which will support the optical elements in their correct positions and orientations and will maintain these alignments throughout the rocket launch environment.

Bruner, Marilyn E.↗
NASA NTRS1990

Manifest - Payloads and accommodations

Developing a long-range manifest begins with the assessment of flight rate capability for the next 6 years. Payloads priorities, launch readiness, and service needs are reviewed and compatible mixed cargo flights are determined and integrated with the dedicated missions to become the manifest. Manifest development must also address Orbiter upgrades to assure that payload-related enhancements meet need dates and that new hardware integration does not adversely affect flight rate capability. A series of Space Shuttle upgrades and new capabilities are in development driven by a continuing effort to improve safety margins, support recognized payload needs, and unique SSF requirements. These enhancements include extended mission duration capability, ASRM development, extended middeck payload support capability, and improved attitude control systems.

Hedin, Dan↗
NASA NTRS1992

Payload bay doors and radiator panels familiarization handbook

The structure and mechanisms associated with the Payload Bay Doors (PLBDs) and the radiator panels are detailed. The PLBDs allow the radiator panels to be exposed to space, protect payloads from contamination, and provide an aerodynamic fairing over the payload bay. The radiator panels dissipate heat from the orbiter and regulate hydraulic fluid temperature. Contamination in the payload bay can hinder the success of missions. Therefore, the contamination control barrier which the PLBDs provide must be efficient in keeping the bay free from contaminants. The aerodynamic fairing the PLBDs provide prevents the orbiter from being torn apart by aerodynamic forces. These facts make the PLBDs and radiator panels mission critical elements of the Space Shuttle.

Godbold, John A.↗
NASA NTRS1992

The use of artificial intelligence techniques to improve the multiple payload integration process

A maximum return of science and products with a minimum expenditure of time and resources is a major goal of mission payload integration. A critical component then, in successful mission payload integration is the acquisition and analysis of experiment requirements from the principal investigator and payload element developer teams. One effort to use artificial intelligence techniques to improve the acquisition and analysis of experiment requirements within the payload integration process is described.

Cutts, Dannie E.↗
NASA NTRS1990

LLM: An L-band multibeam land mobile payload for Europe

The European Space Agency is developing, in the context of the ARTEMIS program, a multibeam reconfigurable mobile payload to provide pre-operational land-mobile satellite services at the L-band over Europe. The L-band Land-Mobile (LLM) payload features high capacity at L-band, efficient use of the L-band spectrum resources, and flexibility in reconfiguring the allocation of bandwith and RF power resources to the different beams. Additionally, a number of features were added to the payload purely for experimental purposes, like the provision of one steerable spot beam which can be repositioned anywhere within the coverage area, and the possibility to reuse L-band frequencies by spatial discrimination between non-adjacent beams, or via orthogonal polarizations. The architecture of the payload and the hardware implementation of the most critical subsystems are described.

Benedicto, J.↗
NASA NTRS1992

Science and application payloads in the 1990's

During the 90's with the operation of the Extended Duration Orbiter (EDO), Space Station Freedom (SSF), large platforms in polar and Geosynchronous orbits around the Earth, and supporting systems and technology, an infrastructure will exist that will offer a wide range of opportunities for science and applications payloads. The Marshall Space Flight Center (MSFC) is in a unique position of studying for NASA science missions for all of these systems. This paper will discuss a variety of payloads being studied for NASA at the MSFC that are scheduled for flight in the 90's, in support of space science and Mission to Planet Earth. These science payloads such as the Controls, Astrophysics and Structures Experiment in Space (CASES), Advanced Solar Observatory (ASO), Laser Atmospheric Wind Sounder (LAWS), and Lightning Imaging Sensor (LIS), etc. will fully utilize the capabilities of EDO, SSF, Earth Observing System (EOS), and Earth Science Geostationary Platform (ESGP). Emphasis will be placed on showing how these scientific payloads can fully exploit the great potential of these new capabilities for exciting new science and application missions.

Desanctis, Carmine E.↗
NASA NTRS1990

Space Station Payload Adaptation System

The development and design of a system of containers for the efficient integration of Space Station payloads is described called the Space Station Payload Adaptation System (SSPAS). The SSPAS was developed to address the incorporation of multiple payloads, the use of a small payload carrier, large numbers of samples, and on-orbit servicing. SSPAS subsystems such as the Spacelab rack are modular and designed for integration into the 'Quick Is Beautiful' (QIB) facility. The QIB is designed to provide access to space for small- and medium-sized microgravity research projects and proof-of-concept investigations. The power-distribution and heat-rejection potential of the QIB are described, and an improved experiment-apparatus container is proposed. The SSPAS rack-mounting and container concepts are concluded to make up an efficent system that can effectively exploit the R&D potential of the Space Station.

Taylor, Kenneth R.↗
NASA NTRS1992

Ground-tended payload operations of Space Station Freedom

The concepts and capabilities that supported ground-tended Space Station Freedom (SSF) utilization and operations are described. On-board computer control support capabilities are required, and potential approaches for computer sequencing are discussed. An integrated process which links the planning processes with the implementation and execution of the operations is required to perform continuous, long-term utilization of SSF. Payload designs that make accommodations for ground-tended operation can be supported by the operations infrastructure. The payload operations integration center and Space Station Control Center are to support continuous operations of payloads that are designed to be operated from the ground. An overall process of ground-tended payload operations which links the weekly planning and continuous ground-tended execution functions is defined.

Noneman, Steven R.↗
NASA NTRS1992

Spaceflight payload design flight experience G-408

Worcester Polytechnic Institute's first payload of spaceflight experiments flew aboard Columbia, STS-40, during June of 1991 and culminated eight years of work by students and faculty. The Get Away Special (GAS) payload was installed on the GAS bridge assembly at the aft end of the cargo bay behind the Spacelab Life Sciences (SLS-1) laboratory. The Experiments were turned on by astronaut signal after reaching orbit and then functioned for 72 hours. Environmental and experimental measurements were recorded on three cassette tapes which, together with zeolite crystals grown on orbit, formed the basis of subsequent analyses. The experiments were developed over a number of years by undergraduate students meeting their project requirements for graduation. The experiments included zeolite crystal growth, fluid behavior, and microgravity acceleration measurement in addition to environmental data acquisition. Preparation also included structural design, thermal design, payload integration, and experiment control. All of the experiments functioned on orbit and the payload system performed within design estimates.

Durgin, William W.↗
NASA NTRS1993

Cost-effective test methods for Shuttle payloads

Techniques are discussed for deriving constrained vibration mode shapes for Space Shuttle payloads using unconstrained or free-boundary dynamic properties. Application of the residual flexibility method requires measurement of a set of free-boundary modes plus the residual flexibility of the payload-to-orbiter interfaces. The mass-additive approach involves the measurement of unconstrained modes and frequencies of a payload with large masses attached to the interfaces. In either case, the orbiter interfaces of the test-verified payload model are analytically constrained to provide the mode shapes for the Shuttle-constrained configuration. Use of these methods or a hybrid combination of them for structures to which they are applicable allows the difficult and expense associated with development and verification of fixed-base test fixtures to be avoided.

Tinker, Michael L.↗
NASA NTRS1994

Spline-Screw Payload-Fastening System

Payload handed off securely between robot and vehicle or structure. Spline-screw payload-fastening system includes mating female and male connector mechanisms. Clockwise (or counter-clockwise) rotation of splined male driver on robotic end effector causes connection between robot and payload to tighten (or loosen) and simultaneously causes connection between payload and structure to loosen (or tighten). Includes mechanisms like those described in "Tool-Changing Mechanism for Robot" (GSC-13435) and "Self-Aligning Mechanical and Electrical Coupling" (GSC-13430). Designed for use in outer space, also useful on Earth in applications needed for secure handling and secure mounting of equipment modules during storage, transport, and/or operation. Particularly useful in machine or robotic applications.

Vranish, John M.↗
NASA NTRS1993

Cost-effective test methods for Shuttle payloads

Techniques are discussed for deriving constrained vibration mode shapes for space shuttle payloads using unconstrained or free-boundary dynamic properties. Application of the residual flexibility method requires measurement of a set of free boundary modes plus the residual flexibility of the payload-to-orbiter interfaces. The mass-additive approach involves the measurement of unconstrained modes and frequencies of a payload with large masses attached to the interfaces. In either case, the orbiter interfaces of the test-verified payload model are analytically constrained to provide the mode shapes for the shuttle-constrained configuration. Use of these methods or a hybrid combination of them for structures to which they are applicable allows the difficulty and expense associated with development and verification of fixed-base test fixtures to be avoided.

Tinker, Michael L.↗
NASA NTRS1993

Utilization of Shuttle small payload accommodations in the DOD Space Test Program

Over the past 27 years, the U.S. Air Force, as executive agent for the Department of Defense (DOD) Space Test Program, has flown approximately 325 space experiments for the Army, Navy, Air Force, and other DOD agencies. These experiments have made significant contributions to the improvement of military technology and operations. Flight of Space Test Program experiments has been carried out utilizing free flyer spacecraft, the Space Shuttle crew cabin, and the Space Shuttle cargo bay. This paper will concentrate on those experiments which have been flown by the NASA Space Shuttle small payload flight systems, e.g., GAS, uprated GAS (CAP), and Hitchhiker flight systems. Discussions of Space Test Program experiments flown by Space Shuttle small payloads flight systems will include the experiment objectives, the accommodations and services provided by the flight systems, experiment results, and lessons learned from the planning and conduct of the flight. Particular emphasis will be placed on those experiments which required and were provided with a new and unique capability by the small payloads flight systems. These capabilities include the first use of the GAS opening lid, the first use of the GAS payload ejection capability, and the first use of the Hitchhiker cross bay carrier.

Hagler, Thomas↗