Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASTICITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Coupled elasticity, plastic slip, and twinning in single crystal titanium loaded by split-Hopkinson pressure bar

Here coupled elasticity, plastic slip, and twinning in high-purity single crystal titanium loaded by split-Hopkinson pressure bar (SHPB) are investigated, in the framework of large deformation and by utilizing the finite element method (FEM). A thermodynamically consistent system of equations for combined plastic slip and twinning is formulated. Novel kinematics is proposed to develop the driving forces for slip and twinning processes and to consider plastic slip in twins. Dislocation based crystal plasticity is proposed, with an emphasis on the interactions among all slip modes in multi-variant/multiphase heterogeneous materials. A mechanism for dislocation density evolution during twinning is proposed. The impact loading along the [0001] and [1$0\bar{1}$1] directions of single crystal high purity titanium is investigated. The evolution of stress-strain field, dislocation density, and volume fraction for each variant in the sample during the entire loading process are obtained and discussed in detail. Results in simulations show that for the [0001] specimen due to the existence of six symmetry primary twin variants with respect to the loading direction and fifteen different slip systems in each variant, the fields of stress and dislocation density are very homogenous in the sample. The simulation results are compared with experimental data for the [0001] and [1$0\bar{1}$1] specimens. The experimental results are explained and interpreted for both specimens, which include the pole figures, the stress-strain curves, and volume fraction of variants. The simulation results provide an important insight into mechanical responses of high-purity single crystal titanium under high rate loading, and this paper advances the mesoscale modeling and simulations in coupled plastic slip and twinning.

36 MATERIALS SCIENCE↗
DOE OSTI2011

A methodology to study crystal plasticity inside a compression test sample based on image correlation and EBSD

Modified compression tests in a coarse-grained austenitic stainless steel have been carried out in order to examine the crystal plasticity behavior for large plastic deformations. The measurements of local in-plane strains provide deeper insight into the deformation process on the local scale. These measurements are performed by digital image correlation technique (DIC) in combination with local crystal orientation measurements by using the electron backscatter diffraction technique (EBSD). Split test samples are prepared to track the strong microstructural changes during deformation, which is done incrementally in 10% steps up to 60% total macroscopic strain. The clear correlation of local strains with crystal orientation changes - e.g. in the case of mechanical twinning - permits to identify the acting deformation mechanisms. Such, experimentally determined local strain maps can be used for verification of crystal plasticity finite element method simulations (CPFEM). - Research Highlights: {yields} Method to study large strain crystal plasticity inside an austenitic FeCrNi-alloy. {yields} Correlation of local strain analyses with crystal orientation measurements. {yields} Deformation mechanism changes locally from dislocation glide to mechanical twinning. {yields} Suitable to study grain-grain interactions, slip system activation and grain boundary effects. {yields} Provide essential data for crystal plasticity FEM studies.

36 MATERIALS SCIENCE↗
DOE OSTI2018

The plastic flow machining: A new SPD process for producing metal sheets with gradient structures

Highlights: • A new process named Plastic Flow Machining is presented to produce thin sheets by an extrusion operation from bulk material. • The produced sheets present ultra-fine grain structures, good mechanical properties and high formability. • A deformation gradient was found across the thickness of the sheet regarding plastic strain, microstructure and texture. - Abstract: A new severe plastic deformation process is presented – the plastic flow machining – an extrusion process during which a sheet is formed through a lateral opening of the die in a single operation. The sheet is heavily deformed presenting an ultra-fine grain structure. Experimental results are presented for commercially pure aluminum concerning microstructures, textures and mechanical properties. A gradient structure was found across the thickness of the sheet concerning plastic strain, grain size and texture. Only simple shear textures were seen. The material strength increased by a factor of three with significant ductility and with relatively high Lankford parameter.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Experimental methodology and theoretical framework in describing constrained plastic flow of FCC microscale tensile specimens

Small scale mechanical testing (SSMT) allows for the quantification of the mechanical responses for microscale and nanoscale material volumes. It has significant potential in improving our fundamental understanding of plastic deformation and in providing an engineering solution for testing complex and/or critical materials. Importantly, previous studies have revealed that plastic intermittency, manifested as strain bursts, are characteristic of the plastic flow behavior at the small length scale. In this work, interfacial constraint has been utilized to suppress strain bursts in order to stabilize plasticity. A new parameter, blocked volume ratio (BVR), is introduced to quantify the degree of constraint for a microscale specimen due to an interface. Here, we showed that the plastic flow behavior in FCC Ni-based metals is highly dependent on the BVR of the specimen.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Comparative analysis of new crystal and plastic scintillators for fast and thermal neutron detection

This paper considers scintillation and physical properties of efficient organic scintillators tested as single crystals and as components of plastics with pulse shape discrimination (PSD). For the first time, single crystals of 9,9-dimethyl-2-phenyl-9H-fluorene (PhF) were grown for studies of the basic scintillation properties of this new compound. Comparison to classical organic crystals, like anthracene, trans-stilbene, and p-terphenyl, and to more recently introduced organic glass showed that the new crystal belongs to a group of the most efficient scintillators, with light output exceeding that of trans-stilbene and PSD comparable to that of p-terphenyl. Furthermore, additional studies were conducted to evaluate scintillation performance and physical properties, like hardness and dye leaching, of plastic scintillators prepared with PhF, organic glass, and liquid diisopropylnaphthalene (DIPN) that were considered as examples for potential replacement of PPO (2,5-diphenyloxazole) in current commercial PSD plastic scintillators. Comparison of the highest performing plastic scintillators prepared with these dyes shows that PhF formulations produced a record light output (LO) increase of 69 % relative to EJ-200. Similar improvements obtained with 6 Li-loaded formulations showed that future development of PSD plastics should not be limited to use of PPO but must involve the search and exploration of new efficient dyes that may lead to discovery of much brighter organic scintillators with improved physical properties required for fast and thermal neutron detection, fast neutron spectroscopy, and antineutrino detection applications.

9,9-dimethyl-2-phenyl-9H-fluorene↗
DOE OSTI2013

Technical specifications for mechanical recycling of agricultural plastic waste

Highlights: • Technical specifications for agricultural plastic wastes (APWs) recycling proposed. • Specifications are the base for best economical and environmental APW valorisation. • Analysis of APW reveals inherent characteristics and constraints of APW streams. • Thorough survey on mechanical recycling processes and industry as it applies to APW. • Specifications for APW recycling tested, adjusted and verified through pilot trials. - Abstract: Technical specifications appropriate for the recycling of agricultural plastic wastes (APWs), widely accepted by the recycling industry were developed. The specifications establish quality standards to be met by the agricultural plastics producers, users and the agricultural plastic waste management chain. They constitute the base for the best economical and environmental valorisation of the APW. The analysis of the APW streams conducted across Europe in the framework of the European project “LabelAgriWaste” revealed the inherent characteristics of the APW streams and the inherent constraints (technical or economical) of the APW. The APW stream properties related to its recycling potential and measured during pilot trials are presented and a subsequent universally accepted simplified and expanded list of APW recycling technical specifications is proposed and justified. The list includes two sets of specifications, applied to two different quality categories of recyclable APW: one for pellet production process (“Quality I”) and another one for plastic profile production process (“Quality II”). Parameters that are taken into consideration in the specifications include the APW physical characteristics, contamination, composition and degradation. The proposed specifications are focused on polyethylene based APW that represents the vast majority of the APW stream. However, the specifications can be adjusted to cover also APW of different materials (e.g. PP or PVC) that are found in very small quantities in protected cultivations in Europe. The adoption of the proposed specifications could transform this waste stream into a labelled commodity traded freely in the market and will constitute the base for the best economical and environmental valorisation of the APW.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2014

Separation of polycarbonate and acrylonitrile–butadiene–styrene waste plastics by froth flotation combined with ammonia pretreatment

Highlights: • Ammonia treatment changes selectively floatability of PC. • The effects of ammonia on PC were investigated through contact angle and XPS. • Reactions between ammonia and PC surface make PC more hydrophilic. • PC and ABS mixtures with different particle sizes were separated effectively. - Abstract: The objective of this research is flotation separation of polycarbonate (PC) and acrylonitrile–butadiene–styrene (ABS) waste plastics combined with ammonia pretreatment. The PC and ABS plastics show similar hydrophobicity, and ammonia treatment changes selectively floatability of PC plastic while ABS is insensitive to ammonia treatment. The contact angle measurement indicates the dropping of flotation recovery of PC is ascribed to a decline of contact angle. X-ray photoelectron spectroscopy demonstrates reactions occur on PC surface, which makes PC surface more hydrophilic. Separation of PC and ABS waste plastics was conducted based on the flotation behavior of single plastic. At different temperatures, PC and ABS mixtures were separated efficiently through froth flotation with ammonia pretreatment for different time (13 min at 23 °C, 18 min at 18 °C and 30 min at 23 °C). For both PC and ABS, the purity and recovery is more than 95.31% and 95.35%, respectively; the purity of PC and ABS is up to 99.72% and 99.23%, respectively. PC and ABS mixtures with different particle sizes were separated effectively, implying that ammonia treatment possesses superior applicability.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Compatibility of Fuel System Elastomers and Plastics with a Fast-Pyrolysis Oil (Bio-oil) at Room Temperature

Herein the compatibility of a fast-pyrolysis bio-oil with 17 elastomer and 21 plastic materials common to fuel storage, dispensing, and delivery systems was assessed by measuring volume and hardness. Diesel was used as the baseline for comparison. The elastomer and plastic specimens were exposed to the test fuels at 23 °C. The exposure times were 4 and 16 weeks for the elastomers and plastics, respectively. The elastomers (except for silicone and styrene butadiene) exhibited pronounced swelling in the bio-oil. This was especially true for the fluorocarbons and acrylonitrile rubbers. For the elastomers, a strong correlation between polarity and volume swell was observed. Compositional and structural analysis on one of the fluorocarbon materials showed that the bio-oil was less effective at extracting phthalate additives than the diesel. However, the crystallinity of a fluorocarbon was altered by the bio-oil. Unlike the elastomers, the plastic materials were less impacted by exposure to the bio-oil. This finding is attributed to their denser and more rigid molecular structures (compared to the elastomers). Notable swelling did occur in the nylons, but this swelling was attributed to water absorption rather than polarity. Comparison with previous studies showed that the observed swelling was lower for both the elastomers and the plastics. Solubility (and hence swell) increases with temperature, and because this study was conducted at 23 °C rather than 50 °C, the reduced temperature is responsible for the lower swell levels.

09 BIOMASS FUELS↗
DOE OSTI2022

Spatio-Temporal Clustering of Seismicity Enabled by Off-Fault Plasticity

While significant progress has been made in understanding earthquake source processes in linear elastic domains, the effect of more realistic rheologies including plasticity is poorly understood. Here, in this work, we simulate the sequence of earthquake and aseismic slip of a 2D antiplane rate-and-state fault embedded in a full-space elastic-plastic bulk. We show that off-fault plasticity may lead to partial ruptures as well as temporal clustering of seismic events. Furthermore, the interaction of fault slip and off-fault plasticity results in pockets of slip deficit. While the energy dissipated through plastic deformation remains a small fraction of the total energy budget, its impact on the source characteristics is disproportionally large through the redistribution of stresses and viscous relaxation. Our results suggest a new mechanism of dynamic heterogeneity in earthquake physics that may have important implications on earthquake size distribution and energy budget.

58 GEOSCIENCES↗
DOE OSTI2023

In-situ study of rules of nanostructure evolution, severe plastic deformations, and friction under high pressure

Severe plastic deformations under high pressure are used to produce nanostructured materials but were studied ex-situ. Rough diamond anvils are introduced to reach maximum friction equal to yield strength in shear and the first in-situ study of the evolution of the pressure-dependent yield strength and radial distribution of nanostructural parameters are performed for severely pre-deformed Zr. ω-Zr behaves like perfectly plastic, isotropic, and strain-path-independent and reaches steady values of the crystallite size and dislocation density, which are pressure-, strain- and strain-path-independent. However, steady states for a-Zr obtained with smooth and rough anvils are different, causing major challenge in plasticity theory. In-situ study of severe plastic deformation of α-Zr with rough diamond anvils revealed that pressure-dependent yield strength, crystallite size, and dislocation density are getting steady and plastic strain- and strain-path-independent.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Versatile microbial communities rapidly assimilate ammonium hydroxide-treated plastic waste

Abstract Waste plastic presently accumulates in landfills or the environment. While natural microbial metabolisms can degrade plastic polymers, biodegradation of plastic is very slow. This study demonstrates that chemical deconstruction of polyethylene terephthalate (PET) with ammonium hydroxide can replace the rate limiting step (depolymerization) and by producing plastic-derived terephthalic acid and terephthalic acid monoamide. The deconstructed PET (DCPET) is neutralized with phosphoric acid prior to bioprocessing, resulting in a product containing biologically accessible nitrogen and phosphorus from the process reactants. Three microbial consortia obtained from compost and sediment degraded DCPET in ultrapure water and scavenged river water without addition of nutrients. No statistically significant difference was observed in growth rate compared to communities grown on DCPET in minimal culture medium. The consortia were dominated by Rhodococcus spp., Hydrogenophaga spp., and many lower abundance genera. All taxa were related to species known to degrade aromatic compounds. Microbial consortia are known to confer flexibility in processing diverse substrates. To highlight this, we also demonstrate that two microbial consortia can grow on similarly deconstructed polyesters, polyamides, and polyurethanes in water instead of medium. Our findings suggest that microbial communities may enable flexible bioprocessing of mixed plastic wastes when coupled with chemical deconstruction.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

When One Cannot Bypass the Byproducts: Plastic Packaging Waste Embedded in Production and Export

While packaging is praised for reducing waste of perishable food products, packaging waste is a growing concern. Its least recyclable type, plastics waste, is increasingly polluting the marine environment and many developing countries are now refusing to take the waste from developed countries. Before responsibility can be established, one has to identify the key producers and consumers. This paper adjusts the packaging waste satellite account in EXIOBASE 3 by combining the official waste data published by the World Bank. Based on input-output methods, we find that the world's top suppliers of plastic packaging waste are the United States, China, and Brazil. Food and beverage products constitute the bulk of the problem. Yet, 21% of these countries' plastic packaging waste is induced export. At the global level, it is 25.8%. About 76.0% of export-induced plastic packaging waste corresponds to packaging of the exported goods that will ultimately be disposed of in the destination country; while the others correspond to the packaging used in their supply-chain and wasted domestically. We conclude that international efforts need to assign shared responsibility and promote improvement in plastic packaging recyclability.

environment responsibility↗
DOE OSTI2023

A Monte-Carlo Method for Evaluating the Economic Performance of Plastics Recycling Systems Using Historical Pricing

The management of plastic waste is a considerable emerging global concern. Conventional plastics recycling rates range from 5–10% in the US, which results in considerable material being sent to landfill. New sorting technologies using artificial intelligence have the potential to dramatically increase the ability of waste management companies to sort out valuable fractions of plastic waste and create high-purity streams for secondary markets. However, several fractions of the plastics recycling stream, i.e., low-density polyethylene, polypropylene, and polystyrene, do not have well-developed markets. These materials may be sent to pyrolysis facilities for thermal recycling, but the economics of the pyrolysis industry are currently uncertain. This work aims to identify the breakeven price of the plastic fractions that would be sent to pyrolysis in order to determine the economic viability of the sorting facility. The work will use Monte Carlo analysis to evaluate several scenarios and understand how compositional variation, price variability, and facility attributes affect the breakeven price. Here, the presorting conditions in Materials Recovery Facilities strongly affects the profitability of the sorting facility. High residual high density polyethylene (HDPE) and polyethylene terephthalate (PET) content in presorted bales are important revenue drivers for the facility, even in presorted 3-7 bales. Key variables that lead to profitability include a high sale price of polyethylene terephthalate, a high sale price of high-density polyethylene, and if polypropylene can be sold to recycling markets (as opposed to pyrolysis facilities).

Plastics↗
DOE OSTI2013

Evaluation of plastic materials for range shifting, range compensation, and solid-phantom dosimetry in carbon-ion radiotherapy

Purpose: Beam range control is the essence of radiotherapy with heavy charged particles. In conventional broad-beam delivery, fine range adjustment is achieved by insertion of range shifting and compensating materials. In dosimetry, solid phantoms are often used for convenience. These materials should ideally be equivalent to water. In this study, the authors evaluated dosimetric water equivalence of four common plastics, high-density polyethylene (HDPE), polymethyl methacrylate (PMMA), polyethylene terephthalate (PET), and polyoxymethylene (POM). Methods: Using the Bethe formula for energy loss, the Gottschalk formula for multiple scattering, and the Sihver formula for nuclear interactions, the authors calculated the effective densities of the plastics for these interactions. The authors experimentally measured variation of the Bragg peak of carbon-ion beams by insertion of HDPE, PMMA, and POM, which were compared with analytical model calculations. Results: The theoretical calculation resulted in slightly reduced multiple scattering and severely increased nuclear interactions for HDPE, compared to water and the other plastics. The increase in attenuation of carbon ions for 20-cm range shift was experimentally measured to be 8.9% for HDPE, 2.5% for PMMA, and 0.0% for POM while PET was theoretically estimated to be in between PMMA and POM. The agreement between the measurements and the calculations was about 1% or better. Conclusions: For carbon-ion beams, POM was dosimetrically indistinguishable from water and the best of the plastics examined in this study. The poorest was HDPE, which would reduce the Bragg peak by 0.45% per cm range shift, although with marginal superiority for reduced multiple scattering. Between the two clear plastics, PET would be superior to PMMA in dosimetric water equivalence.

36 MATERIALS SCIENCE↗
DOE OSTI2014

SU-E-CAMPUS-T-03: Four-Dimensional Dose Distribution Measurement Using Plastic Scintillator

Purpose: To develop the detector for the four-dimensional dose distribution measurement. Methods: We made the prototype detector for four-dimensional dose distribution measurement using a cylindrical plastic scintillator (5 cm diameter) and a conical reflection grass. The plastic scintillator is used as a phantom. When the plastic scintillator is irradiated, the scintillation light was emitted according to absorbed dose distribution. The conical reflection grass was arranged to surround the plastic scintillator, which project to downstream the projection images of the scintillation light. Then, the projection image was reflected to 45 degree direction by flat reflection grass, and was recorded by camcorder. By reconstructing the three-dimensional dose distribution from the projection image recorded in each frame, we could obtain the four-dimensional dose distribution. First, we tested the characteristic according to the amount of emitted light. Then we compared of the light profile and the dose profile calculated with the radiotherapy treatment planning system. Results: The dose dependency of the amount of light showed linearity. The pixel detecting smaller amount of light had high sensitivity than the pixel detecting larger amount of light. However the difference of the sensitivity could be corrected from the amount of light detected in each pixel. Both of the depth light profile through the conical reflection grass and the depth dose profile showed the same attenuation in the region deeper than peak depth. In lateral direction, the difference of the both profiles was shown at outside field and penumbra region. We consider that the difference is occurred due to the scatter of the scintillation light in the plastic scintillator block. Conclusion: It was possible to obtain the amount of light corresponding to the absorbed dose distribution from the prototype detector. Four-dimensional dose distributions can be reconstructed with high accuracy by the correction of the scattered light.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2015

SU-E-T-763: Towards the Mechanical Doping of Plastic Scintillators

Purpose: The doping of plastic scintillators with high-Z elements changes the radiation interaction cross section of the medium and therefore changes the intrinsic response of the detector. The selection of doped plastic scintillators available commercially is limited. This research aims to develop a novel methodology for the mechanical doping of plastic scintillating materials. The ultimate goal of this project is to use doped scintillators of varying intrinsic behavior to unfold the LET (energy) spectrum of any radiation beam. Methods: Commercially available BC408 plastic scintillator was obtained and crushed into uniform powder (using ball mill). Two separate materials were tested for light output signal: uncrushed scintillator and scintillating powder bound by glue. Commercially available U301 UV-hardening glue was used. Scintillation response was measured by creating a thin housing of black acrylic that allowed light from each scintillator to be guided to an optical fiber via a taper. The optical fiber was connected to a PMT; signal was measured using an electrometer. Tests were conducted to determine if crushing+bonding distorted linearity and energy dependence of detector response. Linearity was tested for by irradiating (uncrushed and crushed+glued) for varying durations ensuring signal scaled accordingly; this was done using 300kV x-rays and 6MeV electrons. The effect on energy dependence was examined by obtaining a signal ratio (100kV vs. 300kV; 6MeV vs. 18MeV) for both uncrushed and crushed+glued scintillating material. Results: Crushing and binding with U301 glue did not have an effect on linearity. Energy dependence was changed by 20.3%; crushing+bonding decreased the sensitivity at low energy radiation. Conclusion: This work indicates that crushing and binding of plastic scintillating material does not change the linearity of its response to radiation but does have an effect on the energy dependence. Future work involves addition of high-Z dopants (W, Mo, Pb) and characterization of the detector response.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2018

Mechanism of Plastic Collapse of Nanosized Crystals with BCC Lattice under Uniaxial Compression

Within the dislocation–kinetic approach, based on the nonlinear kinetic equation for dislocation density, an attempt is made to consider the problem of a catastrophic plastic collapse of defect-free nanocrystals of metals with bcc lattice under their uniaxial compression with a constant deformation rate. Solutions of this equation were found in the form of moving waves, describing the dislocation multiplication process as the wave moves along the crystal from a local dislocation source. Comparison of the theory with the results of experiments on defect-free Mo nanocrystals showed that their ultrahigh strength at the initial stage of deformation is associated with a low rate of rise of crystal plastic deformation in comparison with the growth of its elastic component. The subsequent plastic collapse of crystal is caused by a sharp increasing the plastic component, ending with reaching the equality of elastic and plastic deformation rates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Kinetics of Macrolocalization Patterns of Plastic Flow of Metals

The features of the macroscopic inhomogeneity of plastic deformation in the form of autowaves with a pulsating amplitude are analyzed, and data on the localization of sources of acoustic emission at different stages of plastic flow in the stretching of fcc mono- and polycrystals are presented. The relationship between the local components of the plastic distortion tensor in the strain localization zone is traced. The role of acoustic phenomena accompanying the localization of plastic strain in the development of the process of plastic deformation is considered.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗